FJ-15 CHENG KUANG WOOD MACHINERY WORKS CO., LTD. 387, Shoei Yuan Rd., Feng Yuan, Taichung, Taiwan. FAX: 886-4-527 5507 TEL: 886-4-524 1105-7 FJ-15 series: Advanced Manual Systems Simple in design, easy to operate and requires very little maintenance. Can do horizontal or vertical jointing up to 6 inches. High tolerance of the dimension of raw material, can join block as short as 4.5”. Spirally stacked carbide tipped cutters are to set up, cuts smoothly, and virtually eliminates rip-out, tear-out and vibration. Reclaim Valuable Wasted Wood with Finger Jointing Systems by CKM
5
Embed
FJ-15machine to produce vertical and horizontal joints. Spirally stacked carbide tipped cutters is easy to set up cuts smoothly. and virtually eliminates rip-out, tear-out and vibration.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
FJ-15 series: Advanced Manual SystemsSimple in design, easy to operate and requires very little maintenance.
Can do horizontal or vertical jointing up to 6 inches.
High tolerance of the dimension of raw material, can join block as short as 4.5”.
Spirally stacked carbide tipped cutters are to set up, cuts smoothly, and virtually eliminates rip-out, tear-out and vibration.
Reclaim Valuable Wasted Wood with FingerJointing Systems by CKM
ADVANCED MANUAL FINGER JOINTING SYSTEMSFJ-15A for low production and FJ-15B for medium productionThe most economic systems to reclaim valuable wasted wood
CKM, a world-class woodworking machinery manufacturer since 1960, has been producingfingerjointing systems for over 15 years. It has over 350 units of finger jointing systems inoperation worldwide.
The popularity of CKM finger jointing systems is because the systems are designed withthe purpose of finger jointing in mind. The CKM finger jointing systems are simple andinnovative in design, easy to set up, require very little maintenance. The simplicity indesign does not sacrifice the quality or the performance of the systems. The CKM fingerjointing systems are heavy-duty, high precision machines.
CKM offers three levels of systems; the automatic system for highproduction, the semi-automatic system for medium production,and the manual system for lowto medium production.
The FJ-15 is very competitively priced. It is ideal for the shops where productionneed do not justify the cost of a high production system.
FJ-15A consists of a left-hand finger shaper (F-C51), a glue unit (F-G01), and aassemble press (F-A07), The production rate for FJ-15A is about 5000 linear feetper shift.
FJ-15B consists of FJ-15A and a right-hand fingershaper (F-C52). The addition of right-hand shaper canincrease the production to over 10000 linear feet pershift.
FJ-15 seriesTwo Systems, FJ-15A and FJ-15B, to meet your production need:
F-C51(Left)&F-C52(Right)FINGER SHAPERThe Finger Shaper consists of atrim saw, a shaper, and a movingtable which cuts the blocks inbatches.
The batch system has proven to be the most effective system. Tte batchsystem allows usage of short blocksas well as longer lengths. Thesystem also allows the samemachine to produce vertical andhorizontal joints.
Spirally stacked carbide tippedcutters is easy to set up cutssmoothly. and virtually eliminatesrip-out, tear-out and vibration.
This Assemble Press consists of an automaticfeed unit, a cut-off saw, and a hydraulic press. Itcan assemble up to 2 pieces of 14.5 feet boardper minute.
The cycle of feeding, cutting off at length, pressing and ejection is automatic and iscontrolled by PLC.
The powerful hydraulic press ensures tight and strong joint.
F-G01: GLUING UNITThis gluing unit applies glue to the shapedblocks before Assemble Press.
Production Flow Chart
Feed workpiece into the finger assembler.
Hand gluing operations.
End trimming Shaping finger tenon
Both-end tenons finished
Single-end tenon finished
Shaping finger tenon End trimming
F-A07
TABLE
F-C51
F-G01
F-A07
FJ-15(A)
F-C51
F-G01
2
6619 620
1145
2612
2101
FJ-15(A) MANUAL FINGER JOINTER SYSTEM � ( SINGLE SHAPER )
F-A07
F-D05
F-C51
F-G01F-D05
6645 620 1000 1175
1532 37
8
357
2130
(9500)
1057
FJ-15(B) F-G01F-A07
F-D05*2
F-C52F-C51
FJ-15(B) MANUAL FINGER JOINTER SYSTEM � ( DOUBLE SHAPERS )
F-C52
FINGER SHAPERMODEL F-C51 (Left) / F-C52 (Right)
Max: available width working table 17 21/32" (450 mm)
Range of material length 4 1/2" ~ 39 11/16" (115~1000 mm)