First Time WiFi Setup for Simulator Router and SimPad PLUS...The recommended simulator setup for this router is: one simulator, one SimPad Plus and one PC with Patient Monitor (Optional).
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
12V 1.5A
MAC
SERIAL
Network Key (Password):
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
WiFi Network Name (SSID):Orbi Router RBR20NETGEAR
ORBI LOGIN
Network Name:Laerdalnet1234 (last four digitsin MAC address)
12V 1.5A
MAC
SERIAL
Network Key (Password):
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
WiFi Network Name (SSID):Orbi Router RBR20NETGEAR
ORBI LOGIN
Network Name:Laerdalnet1234 (last four digitsin MAC address)
5 6
4
7 8
1 2 3
First Time WiFi Setup for Simulator Router and SimPad PLUS
Connect SimPad andSimulator with cable
Turn on SimulatorPlug in and turn on router Turn on SimPad PLUS
Steady green light = ready
Steady pink light = ready
Select Simulator Select WiFi network
Press and select connected simulator. Follow on-screen instructions.
Look under the router to find the name of the network and the password.
Press and select WiFi network.
Enter Network Name and password Connect to PC with Patient Monitor (Optional)
If you experience connection problems, repeat this process.Important: Do not reset the router. This might require customer service from Laerdal.
Turn on PC and open Laerdal Simulation Home, then open “Network Selector“. Select same WiFi network and follow on-screen instructions.When the network is established, you can disconnect the network cable.
The recommended simulator setup for this router is: one simulator, one SimPad Plus and one PC with Patient Monitor (Optional).Please follow this process in the right order to ensure an optimal connection.
Intended Use
If you need a more advanced setup with more simulators, contact your local IT support. Alternatively, contact Laerdal for further help.
How-to-video
www.laerdal.com/simulator-router
For an easy step by step video of this processand language versions, go to:
12V 1.5A
MAC
SERIAL
Network Key (Password):
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
WiFi Network Name (SSID):Orbi Router RBR20NETGEAR
ORBI LOGIN
Network Name:Laerdalnet1234 (last four digitsin MAC address)
12V 1.5A
MAC
SERIAL
Network Key (Password):
XXXXXXXXXXXX
XXXXXXXXXXXX
XXXXXXXXXXXX
WiFi Network Name (SSID):Orbi Router RBR20NETGEAR
ORBI LOGIN
Network Name:Laerdalnet1234 (last four digitsin MAC address)
5 6
4
7 8
1 2 3
First Time WiFi Setup for Simulator Router and PC with LLEAP
Connect PC andSimulator with cable
Turn on SimulatorPlug in and turn on router Turn on PC with LLEAP
Steady green light = ready
Steady pink light = ready
Open Simulator Firmware & Network Wizard Open Network Selector
Look under the router to find the name of the network and the password.
Enter Network Name and password Connect to PC with Patient Monitor (Optional)
If you experience connection problems, repeat this process.Important: Do not reset the router. This might require customer service from Laerdal.
Turn on PC and open Laerdal Simulation Home, then open “Network Selector“. Select same WiFi network and follow on-screen instructions.
The recommended simulator setup for this router is: one simulator, one PC with LLEAP and one PC with Patient Monitor (Optional).Please follow this process in the right order to ensure an optimal connection.
Intended Use
If you need a more advanced setup with more simulators, contact your local IT support. Alternativley, contact Laerdal for further help.
When the network is established, you can disconnect the network cable.