PROPOSAL Proposal Submitted To: Date: Address: ATTN: City, ST, ZIP Phone No: Job Name: Fax No.: Job Location: X Furnish & Install Tax Included Furnish & Deliver No Tax Included CPU X ALL ELECTRICAL X PAINTING X OTHER (DESCRIBE) FRAMING QTY AMOUNT 3 3 3 3 3 3 $43,466.00 Payment to made as follows: NET 30 DAYS Signature Date EXCLUSIONS: 330-384-4663 strikes, accidents or delays beyond our control. Owner to carry fire, tornado and other necessary insurance. Our workers are fully covered by Workman's Compensation Insurance. TOTAL PRICE INSTALLED - All material is guaranteed to be as specified. All work to be completed in a workmanlike manner according to standard practices. Any alteration or any deviation from above AMARR MODEL 2700 COMMERCIAL POLYURETHANE INSULATED SECTIONAL DOORS - QUOTE IS BASED ON LEVEL APPROACH - INCLINE OR DECLINE APPROACH WILL specifications involving extra costs will be executed only upon written orders, and will become an extra charge over and above the estimate. All agreements contingent upon AFFECT PRICING AND LEAD TIME. 8'2" X 10'0" - WHITE - MAXIMUM HI-LIFT TRACK - WEATHERSTRIP - TWO WINDOWS - TRAFFIC LIGHT SIGNALS AND DRIVER WARNING SIGNS - MANARAS MODEL MH COMMERCIAL JACKSHAFT OPERATOR - 1/2 HORSEPOWER - PIONEER MODEL PFV40 HEAD CURTAIN STYLE DOCK SEALS - 40 OZ. VINYLS - PIONEER MODEL EVR650 AUTOMATIC TRUCK RESTRAINT - AUTOMATIC PUSH PIONEER DOCK LIGHTS - SAFETY YELLOW - CHAIN HOIST - MECHANICAL BRAKE - 3-BUTTON STATION - PIONERR MODEL HP7840 HYDRAULIC PIT LEVELERS - 7' X 8' - 40,000 LB. CAPACITY - BUTTON OPERATION - IN EXCESS OF 50,000 LBS. RESTRAINING FORCE - OPERATING RANGE OF 12" TO 30" - EVR COMMUNICATION SYSTEM INCLUDES INSIDE / OUTSIDE 1 HP MOTOR & PUMP ASSEMBLY - TWO MOLDED BUMPERS - 16" LIP - WE HEREBY SUBMIT/ESTIMATE THE FOLLOWING: FIRST ENERGY 10/13/2009 JEFFREY JOHANSEN TRANSFORMER WAREHOUSE 4295 E. 146TH STREET ACCEPTANCE OF PROPOSAL - The above prices, specifications and conditions are satisfactory and are hereby accepted. You are authorized to do the work as specified. Payment will be made as outlined above. 10/13/2009 John Thompson, President John Thompson Date OMEGA Door Company 1223 GIBSON ST. YOUNGSTOWN, OH 44502 Phone: (330) 747-1365 Fax: (330) 747-3149
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PROPOSALProposal Submitted To: Date:
Address: ATTN:
City, ST, ZIP Phone No:
Job Name: Fax No.:
Job Location:
X Furnish & Install Tax Included
Furnish & Deliver No Tax Included
CPU
X ALL ELECTRICAL
X PAINTING
X OTHER (DESCRIBE) FRAMING
QTY AMOUNT
3
3
3
3
3
3
$43,466.00
Payment to made as follows: NET 30 DAYS
Signature Date
EXCLUSIONS:
330-384-4663
strikes, accidents or delays beyond our control. Owner to carry fire, tornado and other necessary insurance. Our workers are fully covered by Workman's Compensation Insurance.
TOTAL PRICE INSTALLED -
All material is guaranteed to be as specified. All work to be completed in a workmanlike manner according to standard practices. Any alteration or any deviation from above
AMARR MODEL 2700 COMMERCIAL POLYURETHANE INSULATED SECTIONAL DOORS -
QUOTE IS BASED ON LEVEL APPROACH - INCLINE OR DECLINE APPROACH WILL
specifications involving extra costs will be executed only upon written orders, and will become an extra charge over and above the estimate. All agreements contingent upon
AFFECT PRICING AND LEAD TIME.
8'2" X 10'0" - WHITE - MAXIMUM HI-LIFT TRACK - WEATHERSTRIP - TWO WINDOWS -
TRAFFIC LIGHT SIGNALS AND DRIVER WARNING SIGNS -
MANARAS MODEL MH COMMERCIAL JACKSHAFT OPERATOR - 1/2 HORSEPOWER -
PIONEER MODEL PFV40 HEAD CURTAIN STYLE DOCK SEALS - 40 OZ. VINYLS -
PIONEER MODEL EVR650 AUTOMATIC TRUCK RESTRAINT - AUTOMATIC PUSH
PIONEER DOCK LIGHTS - SAFETY YELLOW -
CHAIN HOIST - MECHANICAL BRAKE - 3-BUTTON STATION -
PIONERR MODEL HP7840 HYDRAULIC PIT LEVELERS - 7' X 8' - 40,000 LB. CAPACITY -
BUTTON OPERATION - IN EXCESS OF 50,000 LBS. RESTRAINING FORCE - OPERATING
RANGE OF 12" TO 30" - EVR COMMUNICATION SYSTEM INCLUDES INSIDE / OUTSIDE
1 HP MOTOR & PUMP ASSEMBLY - TWO MOLDED BUMPERS - 16" LIP -
WE HEREBY SUBMIT/ESTIMATE THE FOLLOWING:
FIRST ENERGY 10/13/2009
JEFFREY JOHANSEN
TRANSFORMER WAREHOUSE
4295 E. 146TH STREET
ACCEPTANCE OF PROPOSAL - The above prices, specifications and conditions are satisfactory and are hereby accepted.You are authorized to do the work as specified. Payment will be made as outlined above.
10/13/2009John Thompson, President
John ThompsonDate
OMEGADoor Company
1223 GIBSON ST.YOUNGSTOWN, OH 44502
Phone: (330) 747-1365 Fax: (330) 747-3149
M O D E L 2 7 0 0SECTIONAL DOORS
W A R R A N T I E S
C O L O R S
26" x 13" DOUBLE INSULATED ACRYLIC WINDOWS WITH BLACK FRAMEWHITE FRAME AVAILABLE (SPECIAL ORDER)
24" x 6" DOUBLE INSULATED ACRYLIC WINDOWS WITH BLACK FRAMEWHITE FRAME AVAILABLE (SPECIAL ORDER)
W I N D O W O P T I O N S
RIBBED PANEL WITH STUCCO EMBOSSMENT
P A N E L
Model 2700Heavy-duty 2" Foamed-in-Place Door
The Model 2700 is Amarr’s top-of-the-line high R-Value door
designed exclusively for the Commercial and Industrial
sectional overhead door market. It is constructed using
foamed-in-place polyurethane insulation which creates a strong
monolithic panel that is energy efficient.
Each Model 2700 is secured with standard 14-gauge, galvanized
steel hinges. The interior skin of each section has two continuous
horizontal 20-gauge reinforcing strips. The section joint is
thermally broken and chemically bonded with a pressure-sensitive
adhesive sealant. An EPDM rubber weather seal further enhances
the performance of the joint.
Construction
TRIPLE-LAYERSteel + Insulation + Steel
• 10-year Limited Warranty on the paint and finish
• 1-year Limited Warranty on hardware
• See your dealer or visit amarr.com for complete warranty details
pending patents and/or U.S.A. or foreign patents.Amarr reserves the right to change specifications and designs without notice and without incurring obligations.
Amarr steel doors arrive pre-painted; for custom colors, exterior latex
paint must be used. Visit amarr.com for instructions on painting.
Track: All Amarr Doors are available with both
2" or 3" track in Standard Lift, High Lift, Vertical Lift,
Low Headroom, and Follow-the-Roof Pitch. Custom track
configurations are also available. For drawings and more
information, please visit our website at www.amarr.com.
Hardware: Amarr hardware includes minimum
14-gauge galvanized steel hinges and 13-gauge
galvanized steel track brackets. All rollers have
minimum 10-ball bearings.
Springs: Torsion springs are oil tempered, helical
wound and custom computed for each door for a
minimum 10,000 cycle life. Optional springs are
available up to 100,000 cycle life.
R-Value*
15.67
Amarr is a registered trademark of The Amarr Company, North Carolina, U.S.A.
*Calculated door section R-value is in accordance with DASMA TDS-163.
SECTION 08360
SECTIONAL OVERHEAD DOORS
ART 1 GENEP RAL
.1 S1
ECTION INCLUDES
A. Insulated Steel Doors
B. Track and Framing
.2 R1
ELATED SECTIONS
A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
B. Section 05500 – Metal Fabrications: - Steel framed door openings.
C. Section 06100 – Rough Carpentry: Wood framing and blocking for door opening.
D. Section 07900 - Joint Sealers: Perimeter sealant and backup materials.
E. Section 08710 - Door Hardware: Cylinder locks.
.3 R1
EFERENCES
A. ASTM A 653/A 653M – Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.
B. ASTM B 209/209M – Specification for Aluminum and Aluminum-Alloy Sheet and Plate.
C. ASTM B 221/221M – Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods,
Wire, Profiles and Tubes.
D. ANSI/DASMA 102-1996. .4 S1
UBMITTALS
A. Submit under provisions of Section 01300.
B. duct Data: duct to be used, including: Pro Manufacturer's data sheets on each pro1. Preparation instructions and recommendations.
08360-1
2. Storage and handling requirements and recommendations.
4. Operation and maintenance data.
nnection details, anchorage spacing, hardware locations, and installation details.
of color chips representing manufacturer's full range of available colors and patterns.
um size 6 inches (150 mm) square, representing actual product, color, and patterns.
.5 WIND PERFORMANCE REQUIREMENTS
d negative wind loads as calculated in accordance with applicable governing building codes.
.6 QUALITY ASSURANCE
pes of doors specified in this section with minimum five years documented experience.
by qualified dealer in accordance with the manufacturer’s installation instructions.
.7 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's unopened packaging until ready for installation.
ts for substitutions will be considered in accordance with provisions of Section 01600.
.2 OVERHEAD DOORS - GENERAL
counterbalance mechanisms and hardware to suit the opening and headroom available.
C. Reques
2
A. Provide each door with door sections, brackets, tracks,
08360-2
B. Hardware:
1. Minimum of 14 gauge galvanized steel hinges and 13 gauge galvanized steel track
end stile locking device provided with spring-loaded bolt for inside operation
mm) and wider provided with double end hinges and stiles and long stem rollers.
l, inclined using adjustable
ed with 13 gauge oor size and weight.
d.
. 6. Provide low headroom tracks as indicated.
us
um ith ANSI/DASMA 102-1996 as follows:
les.
4. High Cycle Spring: 100,000 cycles.
alvanized steel step plate/lift handle provided on inside and outside of bottom section.
adlock. 1. Lock: 5 pin cylinder lock interior lock bar and outside key.
stripping: Full length dual contact EPDM rubber bottom seal attached to bottom section.
H. Weather stripping: Perimeter seal for header and jambs.
I. Mounting: Continuous reverse angle mounting for steel jambs.
J. Mounting: Bracket mounting for wood jambs.
K. Exhaust port: Installed in bottom sections. Connecting tube from vehicles by others.
.3 INSULATED STEEL DOORS
rethane insulated door.
ections
brackets. 2. Rollers have 10 ball bearings with casehardened inner and outer races. 3. Sliding
only. 4. Doors 16 feet 4 inches (5102
C. Tracks: 2 inches (51 mm) or 3 inches (76 mm) as required.
1. Vertical track 17 or 19-gauge minimum galvanized steebrackets to assure weather tight closure at the jambs.
2. Horizontal tracks 16-gauge minimum galvanized steel, reinforcgalvanized steel angles as required by d
3. Provide vertical lift tracks as indicate4. Provide high lift tracks as indicated. 5. Provide follow roof slope tracks as indicated
D. Spring Counterbalance: Torsion springs for door counter-balance mounted on a continuo
cross header shaft. Springs to be oil tempered, helical wound and custom computed for each door. Cable drums to be die cast aluminum. Galvanized lift cable to provide minimsafety factor of five to one. Springs to comply w1. Standard Cycle Spring: 10,000 cyc2. High Cycle Spring: 25,000 cycles. 3. High Cycle Spring: 50,000 cycles.
E. Handle: G
F. Lock: Standard interior sliding end stile lock with hole to receive p
G. Weather
2
A. Model 2700 Commercial 2 inches (51 mm) polyu1. Door Size: As indicated on the Drawings. 2. Door Sections: 2 inches (51 mm) thick, sandwich construction consisting of rolled
formed, commercial quality, 27 gauge exterior and interior steel skins, stucco embossed, and ribbed for added strength. Door to have tongue and groove joint system with EPDM thermal break and weather strip between section joints. Sto be insulated with CFC free polyurethane, foamed in place by means of a continuous process. Calculated door section R-value of 15.67 is in accordance with
08360-3
m of section to provide
e metal, a 0.2 mil baked on prime coat and an p coat.
Lites: 24 by 6 inches (610 by 152 mm) double insulated acrylic with Black
Lites: 26 by 13 inches (635 by 330 mm) double insulated acrylic with Black
ieces of 1/8 inch (3.2
01-R1 atin anodized or white electrostatic alloy baked on polycron number 3.
.4 FABRICATION
m size: Model 2700 24 feet 2 inches wide by 16 feet 1 inch high
flection of no more than 1/120 of the spanned width when in the open position.
ART 3 EXECUTION
.1 EXAMINATION
A. Do not begin installation until substrates have been properly prepared.
e ready to receive work and opening dimensions and tolerances are within specified limits.
.2 PREPARATION
A. Clean surfaces thoroughly prior to installation.
re opening to permit correct installation of door unit to perimeter air and vapor barrier seal.
.3 INSTALLATION
with manufacturer's instructions. Doors to be interior face mounted on a prepared surface.
B. Anchor assembly to wall construction and building framing without distortion.
acks suspended from structure. Secure tracks to structural members or solid backing only.
D. Fit and align door assembly, tracks and operating hardware.
E. Install perimeter weatherstripping.
mounting of full hinges. End stiles to be 19 gauge standard. 3. Finish: Door exterior and interior pre-painted steel consisting of a hot dipped
galvanized coating applied to the bas0.8 mil baked on polyester toa. Exterior Color: White. b. Exterior Color: Brown.
1. Window Frame.
2. Window Frame.
3. Thermal Windows/Insulated Glass: 24 by 12 inches (610 by 305 mm) Molded plastic frame with insulated glass. Insulated glass unit to consist of two pmm) thick clear glass with a 7/8 inch (22 mm) aluminum spacer.
4. Aluminum Fullview Section: Single or dual glazing. Finished with mill finish of 2clear s
2
A. Insulated Steel Doors. 1. Standard maximu
(7.4m by 4.9m). a. Galvanized struts (truss bars): Provide on all doors 12 feet 4 inches (3.8 m) and
wider to prevent de
P 3
B. Verify wall openings ar
3
B. Prepa
3
A. Install in accordance
C. Securely brace door tr
08360-4
08360-5
F. Adjust door assembly to smooth operation and in full contact with weatherstripping.
.4 CLEANING
A. Clean doors, frames and glass.
G. Remove labels and visible markings.
.5 PROTECTION
A. Protect installed products until completion of project.
B. Touch-up, repair or replace damaged products before Substantial Completion.
Emergency StopThree Wheel Fork LiftIndependent Lip ControlYellow & Black Diagonal Safety Stripe on Toe GuardsLaminated Bumpers __________ sizePan Units Four Sided Pans Three Sided Pans
In-line Safety Stop (prevents free-fall)
Motor -- 1 hp. 1 ph. 60 Hz
115 Volt
230 Volt
Lip Keeper/Night Locks
Maintenance Strut
Below Dock Control
�
�
08/06
JOB
"HP" SERIES HYDRAULIC LEVELER PIT DETAIL
NOTES
NOT TO SCALE
SECTION "A-A"MAT'L: A-36 C. STEEL
19 1/2"
FRONT ELEVATION
A
A
PIT
10"
BOX
16"TYP
3/16"
MAT'L: A-36 C. STEEL
PIT
PLAN
DRAWN:
J.M.G.
SCALE:
AS NOTED
DATE:
1/30/95
DRAWING NUMBER:
PMI-2014-R1
TOLERANCES:Inch Dimension = 1/16"
Decimal Dimension = .005
Angles = 1+ - + - + -
6'W x 6'L 6'W x 8'L 6'-6"W x 6'L6'-6"W x 8'L7'W x 6'L 7'W x 8'L 6'W x 10'L6'-6"W x 10'L7'W x 10'L
EMBEDDED CONDUITREQUIRED FOR ELECTRIC HYDRAULIC UNIT(S)(1" RECOMMENDED)
MAT'L: A-36 C. STEEL
TOP OF DOCK
48" TO 50"(RECOMMENDED)
DOCK HEIGHT)
Depth Front
1/2" SLOPE(RECOMMENDED)
Depth Rear
REAR PIT WALL TO BE SQUAREWITH DOCK FLOOR (REVERSE SLOPEUP TO 1/2" AS SHOWN IS ACCEPTABLE)
C
C
C
Pit Curb Angle
08/06
PIONEER LOADING DOCK EQUIPMENT
“HP” Series Hydraulic Pit Leveler Architectural Specifications
A. Manufacturer
1. Design is based on products manufactured by; PIONEER Loading Dock Equipment 740 Beechcroft Rd. Spring Hill, TN 37174 800-251-3382 (931) 486-2296
2. Type: Loading dock leveler shall be fully hydraulic, push button operated with no moving parts.
B. Product Characteristics: Dock Levelers
1. Product: Fully Hydraulic dock leveler – Model HP_____________
2. Size: ____” wide x ____’ long, ____” deep to fit ____” deep pit.
3. Capacity: _____________ lbs. Dynamic
4. Construction: The platform shall be ¼” thick, 55,000 lb. minimum yield steel tread plate. Platform support shall be structural steel “C” channel welded at front of leveler to full width header plate. No formed sheet metal shapes will be acceptable. Lip shall be ½” thick (5/8” thick on 35K and above), 55,000 lb. minimum yield steel tread plate with a projection beyond the platform edge of 16” and 12” beyond the bumpers. Lip hinge pin shall be 1 1/8” cold rolled CF1045 steel shaft. Hinge tubes are 2” I.D. seamless with grease fittings. Exclusive structural base frame safety struts will transfer unsupported load forces into the pit floor rather than the embedded angle in case of premature truck departure. Toe guards shall be full range telescoping type as standard.
5. Operation: Fully automatic deck and lip actuation. Single push button
remote controls all stages of operation. When button is depressed leveler will raise and lip will extend. When button is released, unit will descend, lip will automatically retract and leveler will return to stored position. HP series
automatically returns to safe, cross traffic position when truck departs via solid state proximity sensors. No limit switches to be accepted.
6. Characteristics: Unit shall have a working range of 12” above and 12”
below dock level. A velocity fuse, or in line safety stop, is standard and shall provide positive stop in case of premature truck departure. Ramp to be recyclable with truck in position at dock. Cross traffic support and night lock security to be provided by lip stored in lip keepers. Deck to compensate (tilt) a maximum of 4” from side to side to service out of level trucks. Levelers and warranty shall meet or exceed the performance requirements of CS202-56., O.S.H.A. and ANSI MH-14.1. 1 – 1984.
7. Weatherseals – Brush type (meets FDA requirements) weatherseals