Design for Manufacturing and Environment Document WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 1 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system Firebox V100 De-manufacturing Instructions Document Number: 480-2526-001
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Design for Manufacturing and Environment Document
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 1 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
Firebox V100De-manufacturing
Instructions
Document Number: 480-2526-001
Design for Manufacturing and Environment Document
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 2 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
1.0 Purpose This instruction defines the de-manufacturing process for the recovery of this product family as it pertains to recycling of the major product components. 2.0 Scope This instruction applies to the following product family and family part numbers. Product Family Name Family part #’s (not necessarily inclusive) Firebox Vclass • Firebox V100; all revisions
• See other instructions for V10, V60L, V60 and V80
Design for Manufacturing and Environment Document
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 3 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
3.0 Instruction
3.1 -Remove labels and rubber feet
Material removed (part Desc or P/N & material type)
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 4 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
3.2 –Remove screws holding upper chassis to lower
Material removed (part Desc or P/N & material type)
Remove screw, 4 ea.; one under warranty void label
Design for Manufacturing and Environment Document
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 5 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
3.3 –Disengage top chassis and remove front bezel
Material removed (part Desc or P/N & material type)
Remove bezel by depressing two edge tabs with a flat tool
Design for Manufacturing and Environment Document
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 6 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
3.4 –Remove bezel end caps from bezel assy
Front bezel main 0781-00x- PC/ABS Bezel end caps 0801-00x- 26 Ga. steel w/powder coat paint (Drylac 89-30450)
Material removed (part Desc or P/N & material type)
Instruction visual
Remove end pieces of front bezel; 1 ea.
Design for Manufacturing and Environment Document
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 7 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
3.5 –Remove Power Supply from Lower Chassis Assembly
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 8 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
Material removed (P/N & material type)
Instruction visual
Power supply 0747-00x – Power supply assembly; 1 ea. Cable tie 0127-00x – Nylon 66; 1 ea. Cable tie base 0125-00x – Nylon 66; 1 ea.
Disengage supply cable
Remove cable tie and cable tie base with tool
Design for Manufacturing and Environment Document
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 9 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 10 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 11 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
3.7 – Disconnect Main PCBA from Daughter PCBA
Material removed (P/N & material type)
Instruction visual
Disengage PCBA’s from each other
Design for Manufacturing and Environment Document
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 12 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
3.8 –Remove Memory DIMM’s from Daughter PCBA
Material removed (P/N & material type)
Instruction visual
Memory DIMM 0669-00x –PCBA; 4 ea.
Rubber Plugs xxxx-xxx –PSA; 2 ea.
Remove rubber protective plugs (if installed). 0 or 1 or 2 ea.
Disconnect memory devices from units by spreading connector arms and pulling card; 2 ea. on both sides, 4 ea. total
Design for Manufacturing and Environment Document
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 13 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
Remove CF Card, CPU, CPU Clip, CPU heatsink, Memory DIMM and battery
Design for Manufacturing and Environment Document
WatchGuard Technologies. Doc #480-2526-001 Rev. A Page 14 of 14 Authorization and Revision History for this document is available in the WatchGuard ECO system
3.10 – Remove Fans and Fan Guards from Bottom Chassis