tunnelventilation.Pro IP Engineering GmbH Hot Smoke Tests By hot smoke tests, the proper function of fire and smoke detection, as well as that of smoke and heat extraction systems can be assessed. They also serve to visualize the smoke propagation for different scenarios and boundary conditions. IP Engineering GmbH conducts hot smoke tests in buildings, tunnels and industrial plants. The smoke source can be stationary or in motion. The test smoke used is certified and patent- ed, meeting the following requirements: • The physical properties of the test smoke, in particular its optical density, are similar to those of smoke from real fires • The generated heat can be adjusted to allow for simulation of thermal buoyancy without the risk of equipment or structures being damaged. Therefore, a thermal insu- lation of the structure and equipment is not required. • The test smoke is safe to use, represents no hazard to health, doesn’t cause any cor- rosion nor leave any harmful deposits. IP Engineering GmbH Weidenstr. 13 4142 Muenchenstein Switzerland Tel. +41 61 543 00 81 www.tunnelventilation.pro
Fire tests and Smoke Tests
Mar 30, 2016
Fire tests and smoke tests in tunnels and buildings.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
tunnelventilation.Pro IP Engineering GmbH
Hot Smoke Tests By hot smoke tests, the proper function of fire and smoke detection, as well as that of smoke and heat extraction systems can be assessed. They also serve to visualize the smoke propagation for different scenarios and boundary conditions. IP Engineering GmbH conducts hot smoke tests in buildings, tunnels and industrial plants. The smoke source can be stationary or in motion.
The test smoke used is certified and patent-ed, meeting the following requirements:
• The physical properties of the test smoke, in particular its optical density, are similar to those of smoke from real fires
• The generated heat can be adjusted to allow for simulation of thermal buoyancy without the risk of equipment or structures being damaged. Therefore, a thermal insu-lation of the structure and equipment is not required.
• The test smoke is safe to use, represents no hazard to health, doesn’t cause any cor-rosion nor leave any harmful deposits.
IP Engineering GmbH Weidenstr. 13 4142 Muenchenstein Switzerland Tel. +41 61 543 00 81 www.tunnelventilation.pro
Related Documents
![Fire and Smoke Update]](https://static.cupdf.com/doc/110x72/540304fadab5caf82c8b4938/fire-and-smoke-update.jpg)