Fire Detection for Suppression Systems - FireClass

Issue 1 : 2013

Fire Detection for Suppression Systems

Some products are not available in all countries. Contact your local distributor for details.

[email protected]

The images shown in this catalogue are merely indicative and FireClass reserves the right to modify at any time the characteristics of the products here represented.

FireClass locations at:

PO Box 61355Block D, Floor 3Office Park Building #56,Dubai Internet City,Dubai,United Arab Emirates

Tel: +971 (0)4 883 8689Fax: +971 (0)4 883 8674

Unit 6, West Point Enterprise ParkClarence AvenueTrafford ParkManchesterM17 1QS United Kingdom

Hillcrest Business ParkCinderbank, DudleyWest MidlandsDY2 9APUnited Kingdom Tel: +44 (0)1384 453985 Fax: +44 (0)1384 458972

Via Gabbiano 22Zona Industriale S. Scolastica64013 Corropoli (TE)Italy

[email protected]

For more information about FireClass fire detection technology visit: www.fireclass.net or contact us at [email protected]

What is FireClass?FireClass is a revolutionary new class of commercial fire detection products.

FireClass consists of a comprehensive range of fully approved quailty products designed and manufactured in Europe.

FireClass suppression is designed to supplement the conventional and digital addressable FireClass detection range and offers a high quality solution that can stand alone or be integrated into a larger fire protection system.

FireClass Suppression ProductsThe FireClass suppression range includes best-in-class conventional detectors suitable for all fire types and applications together with audible and visual notification devices specific to suppression applications. A number of accessories, power supplies and test equipment complete the range.

FireClass - A New Class of Fire Detection...

Fully ApprovedIn order to ensure peace of mind for both the installer and end user, FireClass products are third party approved and certified to relevant European standards. FireClass approvals go beyond the minimum requirements including EN54 approval of the FireClass network, EN54 detector approval in all detection modes and the Prescient III Suppression Panel having EN54-2, EN54-4 and EN12094-1 approval.

Easy to InstallEase of installation and engineering underpins the concept of FireClass. It runs through all the products. For example panel installation is simplified by allowing electronics to be easily removed for first fix and simple user friendly configuration software and fault finding tools speed up commissioning.

Field device installation is simplified through features such as the ceiling tile adaptor that can significantly speed up detector installation.

Market leading technology in all aspects of the system

With seamless integration to Tyco Suppression systems the TFPP Detection portfolio offers a complete solution developed with a full understanding of all aspects of a Gas Suppression system. As a result the TFPP detection products are designed to meet all aspects of this demanding and specialized area of Fire Protection. With over 40 years of experience designing and developing market leading products the TFPP detection range remains at the forefront of detection technology. Giving you Peace of Mind that you are using the latest and most comprehensive product offering.

Full back up and support / after sales supportHaving a full understanding of all aspects of a Gas Suppression system TFPP offer unrivalled backup and support from in depth training in all disciplines to extensive after sales and technical support. Whatever your needs you can be confident in the knowledge that we have the expertise and support to meet your needs. Giving you Peace of Mind that the support is there should you need it.

Full compatibility of all parts of the systemAs with any complex life safety system, the compatibility and approval of all the component parts is of paramount importance. This is at the forefront of our system offering, all component parts have been verified for compatibility and, where applicable, have also been Third Party accredited as such. As an example the releasing control panel carries both EN54 Pt 2 and Pt 4 (Detection) and EN12094 (releasing) approval which we consider essential but which is often not the case. Giving you Peace of Mind that the entire system will operate exactly as you expect.

04

CONTENTSIntroduction to FireClass 3-4

FireClass Suppression System Diagram 8-9

Prescient III Gas Suppression Panel 10-13

Prescient III Gas Suppression Status Units 14-15

Ancillary Relays, Door Release Unit and Door Interlock 16

600 Series Conventional Detectors 17

Conventional Detector Ancillaries 18-19

Conventional Manual Call Points and Ancillaries 20-23

Conventional Sounders, Beacons and Ancillaries 24-27

Voice Alarm 28-29

Power Supply Units and Batteries 30

Detector Test Equipment 31-34

Notes 36

FireClass Suppression Systems

8System Diagram

Extinguishing Agent Discharge

Door Release Unit

Pressure Switch

2nd Stage Alert

1st Stage Alert

Banshee Excel Sounders

Manual Emergency Hold Abort Unit

Electrical Manual Release Unit

Boxed Alarm Relay1st Stage Output:

Stop Air Conditioning Unit

Extinguishing Indicator Unit

“Extinguishing system operated”

Gas Released

Relay

Solenoid

FireClass Suppression System Diagram

9System Diagram

Gas Suppression Control Panel

Door Release Unit

Extinguishing Status Indicators

Extinguishing Status Indicators and

remote controls

Detector Detector

Remote Indication

Remote Indication

Remote Indication

Remote Indication

Detector Detector

Detector Manual Alarm Unit

Detector Detector

Ceiling Void

Room

Floor Void

Elevation ViewZone 1

Zone 2

Zone 3

FireClass Suppression System Diagram

The Prescient III Gaseous Suppression Control Panel is powerful yet user-friendly and is designed andmanufactured to a high standard. The panel features approval to BS EN 12094- 1:2003, BS EN 54-2 and4 and is designed to BS 7273 part 1. The panel has extensive configuration options but is easy toinstall, programme and operate. The removable chassis enables the engineer to “first fix” an emptycabinet and then fit the chassis at the commissioning stage.

This is supported by comprehensive documentation on commissioning, operating, maintenance andfault finding. In addition there is a comprehensive range of compatible accessories available to meetmost customer requirements.

OperationThree fully-monitored detection zones are provided. Zones 1 and 2 normally provide first stage andsecond stage fire conditions to allow extinguishant discharge (coincidence detection zones). Zone 3 isan auxiliary zone for detection only purposes. Zone 4 is used as a manual release zone.

FacilitiesThree fully-monitored alarm circuits are provided, each rated at 0.5A with various configurationoptions via the engineers DIL switch settings. Two circuits are designed to provide audible warning ofany fire condition and one circuit to provide an individually distinct audible warning of thepre-discharge, discharged and emergency hold condition.

Two fully-monitored actuator/solenoid circuits, each rated at 1A, operate simultaneously upon “extinguishant release”.

An RS485 multi-drop circuit link supports up to 7 Status Controller/Indicators of any type mixed on thecommunication path. Additional terminals and configuration options allows the engineer to configurethe manual release, abort and hold switches to either data comms or hard wired inputs as required.

Normally-open inputs provide for remote evacuate, silence alarms, system reset, lock-off input, lowpressure and gas discharged pressure switch input.

Outputs are provided for first stage signalling, second stage signalling, system discharged, common fireand common fault . These outputs may be configured as either Volt-Free c/o contacts or monitored 24v (50mA) outputs. A system reset Volt-Free relay is also provided.

ConfigurationThe use of DIL switches on the internal motherboard enables the engineer to easily configure theextensive options available and view the panel’s configuration upon any return visit.

Prescient III Gas Suppression Control Panel

10Prescient III Gas Suppression Panel

General Features- Approval to BS EN 12094-1:2003 additional options- Approval to BS EN 54-2 and 4- Designed to BS7273-1:2000- Comprehensive facilities for gaseous suppression systems- Monitored inputs for gas discharged, gas low, isolation valve closed/abnormal, gas trapped in manifold- Control inputs for auto/manual, gas hold, gas abort- 1 minute actuator cut off option- Monitored actuator/solenoid release- Extensive disablement options- Common fire, fault, relay / monitored output facilities- 1st, 2nd, 3rd stage and gas discharged relay / monitored output facilities- Reset relay facilities- Intrinsically safe barrier settings- Metron or solenoid compatible- Single or double knock operation- Pre-discharge delay adjustable from 0 to 60 seconds- Discharged indication with or without pressure switch- Inhibit silence alarms until gas discharged- Latching or non latching fault indication option- Option for rapid buzzer pulse when gas discharge is imminent- One man zone and sounder test- Easily removable chassis

Product Order Codes 508.033.751 Prescient III Gas Suppression Control Panel557.201.508 Prescient III Spare Key Set

Prescient III Gas Suppression Panel

11

12Prescient III Gas Suppression Panel

Prescient III Gas Suppression Control Panel

Prescient III Gas Suppression Panel

13

General Features - SLU1- Two core data link between panel and status unit.- Two core power connection between panel and status unit.- Indication of events/status only unit.

General Features - SLU2- Two core data link between panel and status unit.- Two core power connection between panel and status unit.- Indication of events/status.- Manual Release.- Auto/Manual Keyswitch.

General Features - SLU3- Two core data link between panel and status unit. - Two core power connection between panel and status unit. - Indication of events/status. - Manual Release. - Auto/Manual Keyswitch. - Countdown timer. - Abort and hold off switch.

14Prescient III Gas Suppression Status Units

Gas Extinguishing Status Units

General Features - SLU4- Two core data link between panel and status unit.- Two core power connection between panel and status unit.- Indication of events/status.- Manual Release.- Auto/Manual Keyswitch.

Weatherproof Extinguishing Indicator Unit- E1 Single Red lamp unit- Single 24V d.c. red lamp labelled “Extinguishing System Operated”- Dimensions: 110mm Height, 110mm Width, 115mm Depth

Product Order Codes508.033.752 SLU1 Status Lamp Unit, Indication only508.033.753 SLU2 Status Lamp Unit, Indication, Auto/Manual Select and Manual Release508.033.754 SLU3 Full Function Status Lamp Unit, Indication, Auto/Manual Select, Manual Release, Hold, Abort & Time Counter508.033.755 SLU4 Weatherproof Status Lamp Unit, Indication and Auto/Manual Select540.007.001 E1 Single Red Lamp Unit Heavy Duty IP67, Cast Aluminium Surface Mount Lamp Unit

15Prescient III Gas Suppression Status Units

16Ancillary Relays, door release unit and door interlock

Door Release Units

General Features- Essential piece of fire protection equipment for most installations.- Integrated release button as standard.- Both 24Vdc and 230Vac low cost units available.

Product Order Codes

2501033 24Vdc White Plastic Door Holder2501034 230Vac White Plastic Door Holder

Boxed Relays

General FeaturesA metal boxed heavy duty alarm relay with 25A mains rated DPCO contacts. Available with either a 240VAC (12mA) or 24VDC (50mA) rated coil. Suitable for heavy duty switching applications.

Product Order Codes567.007.008 Alarm Relay 240Vac MK4567.007.009 Alarm Relay 24Vdc MK4

Suppression System Door Interlock

General Features- A microswitch lock keep that can be used with a deadlock to provide a signal to the panel to ensure that the suppression system is only put into Automatic mode when the door is locked shut.

Product Order Code

527.001.028 Micro-switch Lock Keep & Back-plate for Deadlock

17600 Series Conventional Detectors

General Features- Unique early detection enhanced CO fire detector.- Intelligent universal HPO smoke detector.- Low profile, discreet and unobtrusive.- Superior performance and reliability.- Designed for fast, easy installation.- Integral and remote alarm LED.- Series of product approvals.

Detector Identification

600 Series Conventional Detectors

Optical Smoke Detector - A detector ideal for use with slow burning or smouldering fires.

516.600.001 601P Optical Smoke Detector

High Performance Optical Smoke Detector - A combined Smoke and Heat Detector ideal for use with slow smouldering fires or open flaming fires.

516.600.002 601PH High Performance Optical Detector

Heat Detector - A Rate of Rise or Fixed Temperature heat detector ideal for use where smoke detectors cannot be situated.

516.600.003 601H-R Heat Detector - Rate of Rise516.600.214 611H-F 60ºC Heat Detector

Enhanced Carbon Monoxide Detector - A detector that provides very early warning for slow smouldering fires ideal for sleeping risks.

516.600.004 601CH Enhanced Carbon Monoxide Detector

Ion Chamber Smoke Detector - A detector that reacts to the visible and invisible fire aerosols (products of combustion) and is therefore capable of detecting the early presence of hot smouldering and flaming fires.

516.600.005 Ion Chamber Smoke Detector

Solar Blind Infra Red Flame Detector - A detector that is ideal for protecting large open areas without sacrificing speed of response to flaming fires.

516.600.006 601F Solar Blind Infra Red Flame Detector

18Conventional Detector Ancillaries

Conventional Detector Ancillaries

Product Order Code517.050.041 4B 4” Detector Base

Product Order Code517.050.045 4B-D 4” Diode Continuity Base

Product Order Code568.001.018 MC600 Relay Base

4B-D 4” Diode Continuity Base

4B 4” Detector Base

General Features- Compatible with conventional detectors- Designed for rapid installation- Facility to drive a remote indicator- A breakout locking key is provided as an integral part of each base, which can be fitted to lock the detector into position.- Temporary park position- Fits directly to a British or Europeanconduit box or directly onto the ceiling.

General Features- Standard 4” base with a continuity diode- Compatible with Series 600 Low Profile Detector Range- Designed for two wire operation- Ensures that conventional systems meet the requirements of BS5839 Pt:1 for callpoints placed after detectors- Facility to drive a remote indicator- A breakout locking key is provided as an integral part of each base- Temporary park position- Fits directly to a British or European

General Features- Dual pole 24Vdc relay contact (60VA)- Status indicator LED- Low power consumption (<20μA except start up)- Latching operation- Can be used instead of a standard base- Requires diode to be fitted if used in place of a diode base

MC600 Functional Relay Base

19Conventional Detector Ancillaries

Conventional Detector AncillariesCeiling Tile Adapter Kit

Product DescriptionThe Time Saver Ceiling Tile Adaptor isused with the 4B 4” detector base snapfit base and consists of three parts, abezel and clamp that are fitted to theceiling tile and a back-box that carries the detector and base assembly.

It is available as a complete unit or alternatively, the back box can be ordered separately, as can the bezel and clamp assembly.

The Ceiling Tile Adaptor requires a127mm diameter hole to be cut into theceiling tile to allow an easy fit andflawless finish.

4B-DHM Deck Head Mounting

General FeaturesWhere the detectors are mounted in humid and environmentally challengingsituations, the 4B-DHM deck head mount provides a sealed waterproof mountingwhich protects the electrical connections in the base.- 4 x 20mm gland entries- Fits ALL 4” bases- IP55 with supplied gasket

Remote Indication LED

General FeaturesAll detector bases have the ability to drive a remote LED in the event that the installed position of the detector is not easily visible.

- UK single gang mounting- High intensity red LED

Product Order Code517.050.060 Ceiling Tile Adaptor Kit consisting of 1 x CTA-BB CTA Back Box (517.050.056) and 1 x CTA-BC CTA Bezel and Clamp (517.050.057)

Product Order Code517.050.051 4B-DHM Deckhead Mount

Product Order Code540.003.006 Remote LED

20Conventional Manual Call Points and Ancillaries

Conventional Manual Call Points

Indoor Alarm Call Point A manual alarm call point with integral alarm LED and activation resistor making it compatible with the Prescient III Suppression Panel. Operation is by break glass. This call point is semi flush mounted or can be surface mounted using back box 515.001.021, and comes complete with a test key.

Product Order Codes2501012 Conventional Manual Call Point with Glass Element (No Back Box).515.001.021 Back Box For Call Points

Indoor Manual Release Call Point

A manual suppression release call point with activation and end of line resistors making it compatible with the Prescient III Suppression Panel. Operation is by break glass. This call point is surface mounted and comes complete with back box & test key.

Product Order Code509.030.117 T561 Extinguishant Release Manual Callpoint

Indoor Abort Call Point

A manual abort call point with activation and end of line resistors making it compatible with the Prescient III Suppression Panel. Operation is by break glass. This call point is surface mounted and comes complete with back box & test key.

Product Order Code509.030.119 Extinguishant Abort Manual Callpoint

General Features This operates a switch and is indicated by an LED indicator. If required, an optional transparent hinged cover may be installed to guard against accidental operation.- Surface or flush mounting- Test key facility, speeds maintenance visits- IP67 Waterproof model for external applications- Integral LED indicator for easy identification of operation

Technical SpecificationHousing: PC/ABSOperating TemperatureIndoor: -10ºC TO +55ºCOutdoor: -30ºC TO +70ºCIP RatingIndoor: IP24DOutdoor: IP67Relative Humidity up to 95% RH (non-condensing)


Conventional Manual Call PointsIndoor Hold Call Point

A manual hold call point with activation and end of line resistors making it compatible with the Prescient III Suppression Panel. Operation is via a non-latching push button. This call point is surface mounted and comes complete with back box & test key.

Product Order Code509.030.121 Extinguishant Hold Manual Callpoint

Outdoor Alarm Call Point

A weatherproof manual alarm call point with integral alarm LED and activation resistor making it compatible with the Prescient III Suppression Panel. Operation is by break glass. This call point is surface mounted and comes complete with back box & test key.

Product Order Code2501176 Conventional Weather Proof Manual Call Point with Glass Element

Outdoor Manual Release Call Point

A weatherproof manual suppression release call point with activation and end of line resistors making it compatible with the Prescient III Suppression Panel. Operation is by break glass. This call point is surface mounted and comes complete with back box & test key.

Product Order Code509.030.118 Extinguishant Release Weather Proof Manual Call Point

Outdoor Abort Call Point

A weatherproof manual abort call point with activation and end of line resistors making it compatible with the Prescient III Suppression Panel. Operation is by break glass. This call point is surface mounted and comes complete with back box & test key.

Product Order Code509.030.120 Extinguishant Abort Weather Proof Manual Call Point


Product Order Code2501101 Callpoint hinged cover for use with MCP & CP style callpoint models (Colour -Clear)

Product Order Code2501040 Test key for all MCP and CP style callpoints (pk of 10)

Product Order Code515.001.021 Standard Red surface mounting back box for MCP & CP indoor callpoints

Unless stated the indoor callpoints are supplied as flush mount units. The range is approved for use with the standard backbox

Product Order Codes2501014 EN54 Part 11 Spare Glass for MCP and CP series Callpoints (Pack of 5)

515.001.127 Deformable operating unit “glass” for use in place of glasses, for kitchens or other areas where glass is not acceptable. For MCP callpoints only

Callpoint Ancillaries

Callpoint Spare Glasses

StopperGeneral FeaturesThe callpoint STOPPER provides protection from malicious or accidental activation of manual callpoints. Available for flush or surface mounted callpoints.

- Prevents accidental operation of callpoints- Strong polycarbonate construction- Optional break seal kit

Product Order Codes515.001.033 IP036 Break Seal Kit (pack of 1)515.001.030 STI6531 Surface fit Stopper


General FeaturesThe STOPPER II is constructed from tough injection moulded polycarbonate. It consists of a strong tamper-proof clear polycarbonate cover and frame that fits easily over such products as break glass callpoints.

The STOPPER II is suitable for callpoints up to 160mm square.

- Strong polycarbonate construction

- Tamper resistant

Product Order Codes515.001.033 IP036 Break Seal Kit (pack of 1)515.001.034 STI1230 Surface fit Stopper II

General FeaturesThe Weather STOPPER II extends the life of weather exposed devices, such as break glass callpoints, by offering protection against harsh conditions and environments. Experience has shown that this protective cover can extend the life of products installed in saline atmospheres.

While offering environmental protection the Weather STOPPER II is constructed from tough durable polycarbonate which will also guard against tampering, vandalism or accidental operation of devices such as emergency switches.

- Strong polycarbonate construction

- Provides environmental protection

Product Order Codes515.001.033 IP036 Break Seal Kit (pack of 1)515.001.035 STI3150 Surface fit Weather Stopper II

Weather Stopper II

Stopper II

24Conventional Sounders, Beacons and Ancillaries

Electronic Solenoid Bell General FeaturesA unique patented alarm bell with miniature solenoid and integrated electronic control. No backbox required for surface wiring.

- Flexible Mounting Option- Attractive Design

Technical SpecificationDimensions: 6” diameterVoltage: 18-30VdcTypical Current: 30mA @ 24VdcSound Output: 94dB (A) @ 1m

Product Order Code576.501.408 6” 24Vdc Electronic bell - red IP21C

General FeaturesA combined sounder and beacon which combines the features of the Roshni electronic sounder with a fully integrated Xenon beacon. These sounder/beacons are fully compatible with all Roshni tones.

- Combined strobe & sounder

- Weather Resistant to IP65

Technical SpecificationDimensions: 93 Dia x 121D mmVoltage: 18-30VdcTypical Current: 68mA@24VdcTyp. Sound Output: 101dB (A)@1m

Product Order Code576.501.227 Combined Roshni Sounder/Strobe, Red Body/Red Lens, deep base, tone switch & separate sounder/strobe operation.

Flashni - Sounder Strobe


Banshee Excel Sounders

Banshee Excel Lite Sounder Beacon

General FeaturesThe Banshee Excel sounder replaces the Banshee Multi Tone range of Sounders. It uses the same technically superior rocking arm transducer to reproduce the familiar 32 tones of the previous Banshee and Bedlam ranges.

The Banshee Excel adds the Banshee Excel Lite Sounder Beacon to its range using a high output xenon with the familiar sounder. The Banshee Excel Lite can be used as a multi stage device by switching the beacon and the sounder independently using a third wire.

- Modern aesthetic design- 32 Selectable tones- 3 Volume settings- Push and twist mount- Shallow and deep bases- Available in red- Low current consumption- 2 Stage alarm available- Independently switched sounder or beacon- Xenon beacon with the Excel Lite

Technical SpecificationApprovals: VdS approved to EN54-3Tones available: 32Operating voltage: 9-30VdcFlash current consumption: 40mAOperating temperature range (Deg C): -40 to +70Volume control via DIL switch: Maximum, Medium (-10dBA), Low (-20dBA)Flash rate per second: 1Ingress Protection: IP45 or IP66Termination: Screw terminals for 028mm2 to 2.5mm2 wire conductor

Product Order Codes576.501.062 Banshee Excel sounder, red, IP66576.501.063 Banshee Excel Lite, red sounder, red xenon beacon, IP45


Solista LED BeaconGeneral FeaturesUltra low power requirement 3mA or 6mA at 24Vdc. Long life low profile design. Protected to IP54, supplied complete with base.

Product Order Code576.501.230 Solista LED Beacon (Red)

General FeaturesThis high quality Xenon beacon is tested to IP65 making it ideal for the most stringent applications.

The beacon incorporates a low profile Fresnel lens designed to give maximum light output.

- Protected to IP65

- Attractive low profile design

Technical SpecificationVoltage Vdc: 24Power Output Watt(s): 3Alarm Current mA: 126Flash Rate: 60/minRating: IP65Temp. Range: -30 to +70°CDimensions (mm): Height: 51 Diameter: 75

Product Order Code20-120 Low profile red 24Vdc 3 watt beacon

Xenon Beacon - 24V Including Surface Mount Adaptor


SB520 Sounder Booster Module

General FeaturesThe SB520 sounder booster module enables the sounder circuits to drive circuits with higher currents whilst maintaining the reverse polarity integrity line monitoring.

Technical SpecificationEMC/RFI: Equal or exceeds EN61000.6.31 & EN50130-4Operating Temp: -25ºC to +70ºCRelative Humidity: up to 95% RH non--condensingDimensions: 14H x 148W x 87D mmWeight: 100gOutput rating: 15A @ 24Vd.c./10A Max. per terminal

Product Order Codes577.001.023 SB520 Sounder Booster Module517.035.007 FC470CV Ancillary cover for use with SB520 Module.

General FeaturesThe K2214 ALM metal surface mount MK backbox is for use with the SB520 sounder booster module.

Technical SpecificationMK Ref: K2214Mounting: SurfaceDimensions: 146 x 86 x 40mmKnockouts: 1 x 20mm rear/7 x 20mm sidesEarth Screw: YesMaterial: Steel

Product Order Code517.035.011 K2214 ALM Metal Surface Mount MK Backbox

28Voice Alarm

Fire-Cryer Plus® Voice Enhanced SoundersGeneral FeaturesA special Suppression PCB (576.501.173) used with the Fire-Cryer Plus VoiceEnhanced Sounder (576.501.135) will enable 1st, 2nd Stage, ‘Hold’ and ‘GasReleased’ messages to be automatically broadcast dependent on the state of thealarm. See Table A1.

- Clear and unambiguous alarm messages- Voice Alarm Messages provoke an immediate response- Sound Output – Up to 100db(A)- Integral Red Strobe- Low current consumption – average 20mA- No special wiring easily retro fitted- Suitable for ceiling or wall mounting

Technical SpecificationVDC Operating Voltage: 24Current mA @ 24VDC Peak/Avg - Sounder only: 27/20Current mA @ 24VDC Typical: Sounder with low current strobe: 33/26Current mA @ 24VDC Typical: Sounder with high current strobe: 52/60Current mA @ 24VDC Low current strobe only: 13Current mA @ 24VDC High current strobe only: 32Strobe Output Cd (LOW): 2Strobe Output Cd (HIGH): 6Volume Adjustment from Max. dBA Output to max output -18dBA: 82 to 100Weatherproofing: IP45Housing Material: ABSTemperature Range °C: -25 to +70Colour: RedConnections: Screw TB 1.5mm2

29Voice Alarm

Direct Connection to Prescient III

1st Stage

2nd Stage

Hold

Gas Released

STARTING TONE*

2

2

0

1

* (See Table (A2) below)

TONE

0

1

2

3

No tone

Banshee LF Fast Sweep. 800Hz to 950Hz swept @ 9hz

Banshee LF Fast Sweep. 800Hz to 950Hz swept @ 9hz Pulsed at 1 second ON, 1 second OFF

Bell tone, pulsed

Product Order Codes576.501.135 Standard Fire-Cryer® Plus (for use with 576.501.173 in Gas Suppression systems)576.501.173 Fire-Cryer® Plus Suppression PCB557.201.303 Din Rail Mounting Kit for the Fire-Cryer® Plus Suppression PCB557.201.410 IP66 Housing for the Fire-Cryer® Plus Suppression PCB

Table A1 Gas Suppression Messages (Used with 576.501.135)

Table A2

SounderCircuits

TWO LETTERMESSAGE CODE

2

2

0

1

BEACONFLASHES Y/N

2

2

0

1

SPEECHMESSAGE

Fire stage extinguishant release warning.

Second stage extinguishant release on hold.

Extinguishant gas release on hold.

Extinguishant released.

30Power Supply Units and Batteries

BatteriesTechnical SpecificationProduct Code: 2602006 2602005Voltage (V): 12 12Ah at 20h rate: 17.0 12.0Length: 181 151Width: 76 98Height: 167 94Height including Terminals: 167 100

Product Order Codes2602006 12 Volt 17.0 Ampere hour rechargeable sealed lead acid battery2602005 12 Volt 12.0 Ampere hour rechargeable sealed lead acid battery

Power Supply UnitsGeneral Features- Robust metal housing.- Twin fused outputs.- Temperature compensated charging.- Deep discharge protection of batteries.- Fault relay output.- Comprehensive LED status indication.

1.9 Amp PSU:

- Size (H x W x D) 225 x 350 x 105.2 mm- Weight 3.6kg (without batteries)- Temperature -5 to +40°C - Supply voltage 230VAC factory default setting 110VAC (+10%/-15%) @1.2A field selectable option

5 Amp PSU: - Size (H x W x D) 408 x 383 x 97mm - Weight 4.3 Kg (without batteries)- Operating temperature -5°C to +40°C- Supply voltage 230VAC 50/60Hz

Product Order Codes557.200.731 1.9A Boxed Power Supply Unit - EN54 / CPD Approval558.004.020 24V 5Amp Power Supply Unit with Housing for 17A/H Batteries

31Detector Test Equipment

Essential Test Equipment

Smoke, Heat & CO Detector Test Kit

Testifire is a 3 in 1 tool which represents the next generation of detectortesting enabling smoke, heat and CO testing from one device. Latesttechnology stimuli production and delivery renders the product suitablefor testing complex multi sensors to basic single sensor detectors.

Its advanced design allows for single, sequential or simultaneous stimuligeneration. This ensures each type of detector can be functionallytested in an efficient manner.

Testifire eliminates the need for pressurised canisters by usingreplaceable capsules. It addresses global warming concerns associatedwith aerosols reducing waste and transport bulk.

Product Order Code517.001.236 Includes: 1 x Testifire Smoke, Heat & CO Detector Tester 1 x Testifire Smoke Capsule 1 x Testifire CO Capsule 2 x Solo Battery Batons 1 x Solo Battery Charger

Product Order Codes517.001.237 6 x Replacement smoke capsules for use with Testifire

517.001.238 6 x Replacement CO capsules for use with Testifire

Smoke & CO Capsules


Battery Charger

800RT Detector Removal Tool

Telescopic Access Pole

General Features- Compatible with 600 series detectors- Enables detector dust covers to be removed

Product Order Code516.800.917 800RT Detector Removal Tool

General Features- Solo Telescopic Pole extends from 1.26 to 4.5 metres- Optimum strength to weight ratio- Certified non-conductivity- Simple locking mechanism and easy to use

Product Order Code

2501095 Solo Telescopic Access Pole

Product Order Code2501096 A 1.13 metre Solo Extension Pole which can be used on its own or fitted to the Solo Telescopic Access Pole

Product Order Code

517.001.243 Fast Charger for use with Solo Battery Batons

Extension Pole


Storage Bag

Battery Baton

Product Order Code2501097 A protective carry and storage bag for the Testifire product range

Product Order Codes517.001.224 Adaptor for Solo Access Poles to allow fitment of the following:

516.800.917 800RT Detector Removal Tool592.001.012 T110 Flame Detector Tester

Product Order Code517.001.239 NiMH Battery Baton for use with the Testifire Tester

Product Order Codes592.001.012 T110 Test Source for use with Solo 704 adaptor tube B (517.001.224) and Solo 100/101 poles (2501095 / 2501096)592.001.010 T110 PP3 Battery and Charger Kit

Product Order Code

592.001.018 T110 Adaptor for series 600 flame detectors

Adaptor Tube B

Flame Detector Test Equipment


Flame Detector Tester

592.001.012

2501095

Detector RemovalTool

516.800.917

2501096

2501096

2501096

2501095

2501095 +2501096 (x1)

2501095 +2501096 (x2)

2501095 +2501096 (x3)

2501097

Adaptor Tube B517.001.224

For use with:Testifire Smoke, Heat & CO Detector Test Kit 517.001.236

35Notes

Notes

For more information about FireClass fire detection technology visit: www.fireclass.co.uk or contact us at [email protected]

FireClass locations at:

PO Box 61355Block D, Floor 3Office Park Building #56Dubai Internet CityDubaiUnited Arab Emirates

Tel: +971 (0)4 883 8689Fax: +971 (0)4 883 8674

Unit 6, West Point Enterprise ParkClarence AvenueTrafford ParkManchesterM17 1QS United Kingdom

Hillcrest Business ParkCinderbank, DudleyWest MidlandsDY2 9APUnited Kingdom Tel: +44 (0)1384 453985 Fax: +44 (0)1384 458972

Via Gabbiano 22Zona Industriale S. Scolastica64013 Corropoli (TE)Italy

[email protected]

Fire Detection for Suppression Systems - FireClass

Documents