Finn Parts Training Supplement HydroSeeders® Straw Blowers Bark Blowers Material Transfer System.

Finn Parts Training Supplement

HydroSeeders®

Straw Blowers

Bark Blowers

Material Transfer System

• Support Team• Introduction to Equipment & Key

Components• Information / Resources

Support Team

Parts Department [email protected]

• Phone: 1-800-229-8707• Fax: 1-513-874-1613

• Leslie Williams – Parts Manager• Email: [email protected]

• Don Brown – Parts Rep• Email: [email protected]

• Mike Bradham – Service Manager• Phone: 513-642-0146 (x 266)• Cell / Hotline: 513-341-7962• Email: [email protected]

• Bruce Ferone – Warranty Administration• Phone: 513-874-2818• Email: [email protected]

Support Team (Cont’d)

Support Team (Cont’d)

• Andy Hodek – Distribution Sales Manager - South• Phone: 901-497-0152• Email: [email protected]

• James Loneman - Distribution Sales Manager - Central• Phone: 816-547-5471• Email: [email protected]

• Jason Wedmore – Distribution Sales Manager - West• Phone: 541-915-3885• Email: [email protected]

• Jon Richardson - Distribution Sales Manager - East• Phone: 513-907-2980• Email: [email protected]

• Support Team• Introduction to Equipment & Key

Components• Information / Resources

Finn HydroSeeders® Medium & Large Lines

T75 T90

T170

T120

T280 T330 / T400

HydroSeeder® - Top Moving Parts / Wear Items

Part Numbers Description

000698 007469

Pump Grease Lube Sticks for 3 Way Valves

007420012529

Bearing & Seal Kit for Agitator (1 ½ inch)Bearing & Seal Kit for Agitator (2 inch)

006969012397

Swivel Repair Kit for Tower (2” x 90°)Swivel Repair Kit for Tower (2 ½” straight)

006513 006514 006515

Nozzle Gaskets (2 ½”) Coupler Gaskets (2”)Coupler Gaskets (1 ½”)

004593080626002190

Drain Plugs for the Tank (2 ½”)Drain Plug for Tank (3”)Drain Plug for Tank (2 ½” brass)

Finn Straw Blowers

B260

B70B40

Small Lines

Straw Blower – Top Moving Parts / Wear Items

Part Numbers Description

035024-09 031018-01

Bearing Blocks for the Chute (B40 )Bearing Blocks for the Chute (B70)

020110 020111 023363

Replacement Beater Chain (3 pitch)Replacement Beater Chain (4 pitch)Replacement Beater Chain (5 pitch)

020119 Chain Pin

022487 Nut for Pin

Finn Bark Blowers™

BB302 BB705

BB1200 series

Bark Blower™ – Top Moving Parts / Wear Items

Part Numbers Description

055385 4” Gasket

055377 4” Hose adapter

055375A 4” Female Hose Coupler

055374A 4” Male Hose Coupler

Hose Gaskets & Replacement Hose Ends

Engines – All Models

• Kohler (Gas)– T30, T60, and T75 HydroSeeders™– B40 Straw Blower– MTS

• Kubota (Diesel)– T90, T120, and T170 HydroSeeders™– B70 Straw Blower– BB302 and BB705 Bark Blowers

• John Deere (Diesel)– T280, T330, and T400 HydroSeeders™– B260 Straw Blower– BB1208, BB1216, and BB1222 Bark Blower

• Cummins (Diesel)– Titan 280, Titan 330, and Titan 400 HydroSeeders™

All Machines – Top Moving Components /Wear Items

• Filters for engines, blowers and hydraulic systems

• Ignition Keys• Control Cables• Exhaust Components

• Support Team• Introduction to Equipment & Key

Components• Information / Resources

Equipment Identification “I need to order a Finn Part….”

Where does the customer find the serial number?

» Serial number plate (aka “Finn Name Plate) is generally located on the front, right side of the equipment (on the frame)

» On some Bark Blowers, the serial number is located under the control panel.

» Finn Serial numbers start with two or three letters and end with numbers.

The letters tie the machine to a manual.

Only the following letters are valid in Finn serial #’s:

M,O,D,E,L,N,U,B,R,S

» Use the manual look up under the parts log in to find the serial number that matches the machine.

*Note: We are currently working on a lookup to cross reference serial numbers. Some will not be available at this time.

Operators & Parts Manuals Section - Example

Model #: T60Serial #: SOA-1234

Select Model and Serial Number Pre-fix

T60 HydroSeeder™ SOA Owner’s Manual

Serial # Plate

How to Find Correct Part in Owner’s Manual

• Parts Lists are at the back of each manual (T60 Example)

Placing a Parts Order

Stocking Orders:

» Stock orders receive 30% discount off of list price on all items.

Non-stocking Orders (Drop Shipment and Expedited Orders):

» Non-stocking orders receive a 20% discount off of list price.

» Orders placed by 2:00pm (Eastern) for overnight delivery will be shipped the same day; all other orders go out within 24 hours.

Information to Be Included on Order:

» Bill To and Ship To Addresses

» Method of Shipment and PO Number

» Part Number, Quantity, and Description

Handling Fees:

» There is a $5 handling fee on each order to offset handling costs (there are no minimum order requirements).

Placing a Parts Order with Finn

Methods of Shipment: – Small Parcels shipped via Fed Ex:

» Standard Delivery -Arrives within 3 days after shipment» Express Delivery -Arrives 2 days after shipment» Premium Delivery -Arrives 1 day after shipment

– Larger orders shipped via LTL carrier » Finn determines most qualified carrier based on price, timely

service, and on-time delivery record.

Where to Submit Order:» Via Email: [email protected]» Via Fax: 513-874-1613» Via Phone: 800-229-8707

Warranty

– Parts Warranty» Genuine Finn Parts are warranted for 90 days from the date of

purchase.– Equipment Warranty

» Finn Bark Blowers are warranted for 1 year or 1200 hours from date of customer purchase.

» Finn HydroSeeders® and Straw Blowers are warranted for 2 years or 2000 hours from date of customer purchase.

– Finn Dealers are responsible for registering each piece of equipment with Finn’s Warranty Department at the time of sale OR when the machine is moved into the Dealer’s rental fleet.

– To determine if a piece of equipment is still under warranty, call Bruce Ferone at Finn (513-874-2818)

Warranty Service

• Claim Number: A Finn Warranty Claim Number must be obtained from the warranty

department the same day work is performed if business hours allow or next business day at the latest.

 • All warranty labor must be pre-approved with a Work Authorization Number provided by

Finn’s Warranty Administrator prior to work being performed. Exception: If work being performed is per the current Labor Allowance Schedule provided by Finn, pre-approval is not required. However a Warranty Claim Number is still required as noted above.

 • In order to obtain the Work Authorization Number, an estimate of costs must be

provided to Finn and approved by the Finn Warranty Administrator, Director of Engineering or CFO before work begins. Once approved, any additional costs above the approved cost must be approved in order to be eligible for warranty coverage.

• Transportation, hauling, storage, or other similar costs are not part of Finn’s obligation under the limited warranty and are the responsibility of the equipment owner.

Labor Allowance Schedule

Part Description Model Applies to what models Name of repair or serviceHours allotted

055483 AL662-108-AS-36 DRAGCHAIN ASSY BB302 BB302 R&R Floor Chain 6.00055750 BB302 PLC Control Box Assembly BB302 BB302 R&R Control Box 1.00080567 CHOKE CABLE ASSEMBLY T60 T60/75 R&R Choke Cable 0.50080654 MARINE STARTER SWITCH T75 T60/75 R&R Key Switch 1.00006596 CABLE, PUSH-PULL X 74" LF120 T90/120 R&R Throttle Cable 0.50045001 M-D PNEUMATICS BLOWER BB1216 BB1208-1222 R&R Blower 4.50070660 HYD MOTOR 104-1028-006 T120 T90/120 R&R Agitator Motor 3.00KU66711-55131 KEY SWITCH #66711-55130 T120 Anything with a KU R&R Key Switch 1.00008314 DRIVE SIDE BEARING:HANNAY T120 All Hannay Reels R&R Driver Side Bearing 1.00022891 STARTER RELAY T330 TITAN Big Tanks R&R Starter Relay 0.50080482 CHARLYNN T SERIES#158-1037 MTR T75 T30-75 R&R Agitator Motor 3.00075494-TS Oil cooler temperature switch TC115 T330 All units with an oil cooler R&R Temp switch 3.00KUK3511 1505 HYD PUMP KIT FORT90/120 (See Notes) T120 T90/120 R&R Hydro Pump 4.50002383 Pressure Lubricator T60 All Hydro Seeders R&R Pressure Lubricator 0.25004934 OIL SWITCH KUBOTA T90 Anything with a KU Oil Pressure switch repair 0.25007420 1 1/2" bearing and seal assembly T120 T30-T170 R&R Bearing and Seal Assy 4.00 per007710 BALL VALVE, 1-1/2 IN FULL PORT T170 T75-400 R&R Valve 0.50008313 IDLE SIDE BEARING:HANNAY T120 All Hannay Reels R&R Idle Bearing 1.00012341 SOLENOID VALVE T330 TITAN T280-400 R&R Clutch Solenoid 1.00012529 2 "BEARING ASSY. T330 T280-T400 R&R Bearing and Seal Assy 4.00 per012727 Throttle Control Card T330 T280/400 B260 R&R Throttle Control Card 0.50

035073 #512347 W/1-1/8" BORE, CW ROT'N OGURA B40 B40 R&R Clutch 4.00035075 Belt set B40 B40 R&R Drive Belts 2.00080329 SIGHT GAUGE BB705 All but Titan R&R Sight Gauge 4.00006444 GREASE RETAINER T400 Titans R&R Sight Gauge 4.00008686 Brand 4-way Hydraulic Valve T120 T90/120 R&R Agitato Control Valve 3.00022119 MAGNETIC SWITCH #117PH-SB B70 T90/120 B70 R&R Murphy Switch 0.50045004 Couplings BB1208 12 Series R&R Blower Drive Coupling 2.00055488 HUB CITY#3T200BC TAKE UP FRAME BB302 BB302 R&R Adjuster Bearing Frame 2.00 per023802 Safety Switch T170 T170 R&R Murphy Switch 0.50052076 COLEHERSEE KEY SWITCH #95521-B T330 All Units with a JD engine R&R Key Switch 1.00008635 CHAR-LYNN HYD MOTOR FOR REEL T170 T90-400 R&R Hose Reel Rewind Motor 2.00052436 MARINE-CONSTRUCTION SWITCH B260 B260 and BB's R&R Safety Switches 0.25 per011922 HYD PUMP;PSI & GPM COMPENSATED T330 T280-400 R&R Hydro Pump 3.00012333 CHAR LYNN 6000 MOTOR#112-1066 T330 Big Tanks R&R Agitator Motor 3.00 per031470 Radiator for Kubota V1505 SRF T120 Anything with a KU R&R Radiator 3.00031470 Radiator for Kubota V1505 SRF B70 Anything with a KU R&R Radiator 3.00031470 Radiator for Kubota V1505 SRF BB302 Anything with a KU R&R Radiator 1.00006443 MECHANICAL SHAFT SEAL T330 T90-400 R&R Mech Seal 4.00012765 1-1/2" Bore Cylinder, 4" Stroke T330 TITAN T280-400 R&R Air Cyliner frm Clutch 1.00012857 Brand AO120O4LSR 4-Way T120 T90-400 R&R Hose Reel Valve 1.00035084 Warner Electric Clutch T60 T60/75 R&R Clutch 2.00055568 Temp SWITCH BB302 All 1505 Engines R&R Coolant Temp Switch 1.00080493 RADIAL LIP SEAL T75 T30-75 R&R Radil Lip Seal 5.00012693 T170/330 Poly Fuel Tank T330 TITAN T170-400 R&R Fuel Tank 0.50080485 B09395 MECH. SEAL T60 T30-75 R&R Mech Seal 4.00031274 9 JS COUPLING INSERT BB302 BB302 R&R Blower Drive Coupling 2.00055487 HUB CITY#7U250 X 1"TAKE-UP BR. BB302 BB302 R&R Floor Chain Adjuster Bearing 2.50 per012739 Murphy Powerview #PV100-A B260 B260 and Big Tanks R&R Power View 0.25023814 Throttle Actuator BB302 All units with Electric ThrottleR&R Throttle Actuator 0.50012694 Rochester Fuel Gauge T330 TITAN Big Tanks R&R Fuel Gauge 0.50

Warranty

• Make sure your customers register

their engines.• An Engine Manual should

come with the Finn.• John Deere, Cummins, Kubota or Kohler,

with directions on what the

engine warranty is and how

to register.• Engine Warranties are

2 years from the Finn invoice date.

On-Line Tools www.finncorp.com

• Spec Sheets• Parts Information:

– Owners Manuals– Parts Price Look-up– Freight Look-up– Practical Service Guide – HydroSeeder– Pictorial Guides (Nozzle / Clutch)

Website

Demohttp://www.finncorp.com/distributors/partslogin.asp

Parts Price Lookup

1. Go to www.finncorp.com

2. Click on Parts Login in upper left corner of the Home Page (If you don’t have a user name / password, the Parts Manager at your branch needs to send a request for log in to [email protected])

3. Scroll down to the Parts Scoop.

4. Click on Parts Price Lookup

5. Enter the part number you are looking for. Finn part numbers are at least 6 digits. If your item number has 4 digits, add 00 to the front.

6. If pricing is available on line for your part, the description and price will display on the screen. Pricing shown here is List price.

Freight Lookup

1. Go to www.finncorp.com

2. Click on Parts Login in upper left corner of the Home Page (If you don’t have a user name / password, the Parts Manager at your branch needs to send a request for log in to [email protected])

3. Scroll down to the Parts Scoop.

4. Click on Freight Calculator

5. Enter the zip code your package is shipping to. This displays the zone number for the area.

6. Click on the Rate Finder Tab at the bottom of the screen.

7. Using the drop down boxes, select the zone that was displayed and the dollar amount range the order falls in.

8. This will display freight rates for all three methods of shipping.

*Please note this does not apply to oversize shipments

Practical Service Guide - HydroSeeder®

• To assist with trouble-shooting, a service guide has been prepared to guide you through the most common customer issues.

• This step-by-step service guide is found in the Dealer Parts section of the website under “Parts Scoop”.

QuestionsAnd

Feedback