This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
• Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null & void
• UL Listed when assembled with STRIP LEDs at Q-Tran
• NRTL Listed for install in Storage Areas with Clothing, NEC Field 410.2 and 410.16 when assembled as a fixture, at Q-Tran facility (Not applicable for encapsulation)
• WhiteOptics technology
• Surface mount
• Two different cut off angles: CL/60 and CL/70
• Two encapsulation options: clear and translucent
• Metallic end caps with white interior
Single(Input Only)
Pass through(Input/Output)
Not installed(Strip not installed in factory)
Stainless steel Magnet clip
Black anodizedMatte finishBlack end caps
BLACKSATIN
Bronze anodizedMatte finishBronze end caps
BRONZE
Satin anodizedMatte finishMetallic end caps
.44"
.52"
.70"
.60"
.81"
.66"
.20"
.81"
.86"
Profile with flat lens stainless steel
mounting clip and mounting tray
Profile with flat lens magnet mounting clip
Profile with flat lens
.70"
.72"
.60".44"
.52"
.81"
.72"
.60"
.78"
.81"
.98"
.20"
Profile with optical lens stainless steel mounting clip and mounting tray
Profile with optical lens magnet mounting clip
Profile with optical lens
1.25"
.20"
.20"
.81"
COMPLIANT
.20"
.81"1.2
5"
2 clips provided for 4' or less; 4 clips provided for greater than 4'
1 If selecting WhiteOptics option, select TORQ-WO for Product
Mounting NOTE: 2 clips provided for 4’ or less;4 clips provided for greater than 4’
NOTES: • Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void
MG Millwork Info HARDWARE
#6x5/8" Flat head screw(Included)
#4x5/8" Flat head screw(Included)
12"
.75".23"
2.5"
.64"
.26"
.625"
.21"
.625"
.20"
.81"1.2
5"
1.25"
.20"
.20"
.81"
Stainless Steel Clip(SST-01)
Magnet Clip(MG-01)
Magnet Mount Accessory(MMA)
(Sold separately)
NOTE: TORQ is recessable with all compatible LED strips except SW-HE24/9.0.NOTE: Height of millwork will be dependent on overall height with the MG clip in addition to the thickness of the magnet mount accessory
.85”
.04”
3.1. 2.
3.1. 2.
3.2.
20MINS
1.
832
3.2.1.
NOTE: Apply silicone in a well ventilated area. 832 Silicone is sold with caulking gun. Do not use in any submersible applications.
NOTE: The magnet clips should be offset to the flat heads used to secure the bracket, to maximize magnetic connection.
Using the #6 Flat head screws, mount two screws into the 12” magnet bracket through the slotted holes at each end
Attach the magnet clips onto the extrusion Connect the assembled extrusion and its magnet clips to the magnet bracket, the install should match the section view