Page Song Xu, Ph.D. Sr. Application Scientist Keysight Technologies In-situ Study of Lithium Battery with Electrochemistry/ AFM Find me on Linked-in And join the:
Page
Song Xu, Ph.D.
Sr. Application Scientist
Keysight Technologies
In-situ Study of Lithium Battery with Electrochemistry/ AFM
Find me on Linked-in
And join the:
Page Why are we interested in battery research?
The Original Question of all: Why
Page
Lithium Battery
Page SEM Observation of Solid-Electrolyte Interphase
Elsevier , “Comparative study of the solid electrolyte interphase on graphite in full Li-ion battery cells using X-ray photoelectron
spectroscopy, secondary ion mass spectrometry, and electron microscopy”
Jung Tae Lee a, Naoki Nitta a, James Benson a, Alexandre Magasinski a,
Thomas F. Fuller b, Gleb Yushin a,*
Lithium Battery
Page
AFM / STM In Liquid Imaging is used to observe the formation of SEI
in-situ and in real time
Page
Changing potential while scanning
Fixed potential
Basics of Electrochemistry AFM/STM: the in-situ and the resolution
Page
EC Bulk Cu Crystal Deposition
Page
Reference electrode
Electrolyte
Combning AFM/STM with the potentialstate to form EC-AFM/STM
Page
Basics of Electrochemistry AFM/STM: the sample cell
reference electrode
(no connection with
other electrodes)
counter electrode
(no connection with
other electrodes)
working electrode (in contact with Au)
Page
Basics of Electrochemistry AFM/STM: Design of glove box
Page
Basics of Electrochemistry AFM/STM: Environmental control with professional glove box
Page
DALHOUSIE
University
www.physics.dal.ca/~dahn
The problems of AFM inside a professional glove box: noise and
vibration isolation
Page
Solution to the problem: miniature vibration isolation
Page
Solution to the problem: miniature vibration isolation
Page
Solution to the problem: miniature vibration isolation
Page
reference electrode
(no connection with
other electrodes)
counter electrode
(no connection with
other electrodes)
working electrode (in contact with Au)
The problems of AFM inside a professional glove box: Electrical
Chemistry Cell
Problems
•Small parts
•Leak
•evaporation
•Corrosion
Page
Electrodes
Reference electrode: Mostly Ag, Cu ok for Cu deposition
experiment
Counter electrode: Mostly Pt, Cu ok for Cu deposition experiment.
The long loop is for the large current in the big
AFM cell. STM counter electrode doesn’t need the
loop.
The problems of AFM inside a professional glove box: Small parts of
Electrical Chemistry Cell
Page DALHOUSIE
University
www.physics.dal.ca/~dahn
Electrode Lithium
Electrode
The problems of AFM inside a professional glove box: Small parts of
Electrical Chemistry Cell
Page
Customizable in
Footer 19
The problems of AFM inside a professional glove box: and handling
and the corrosion
Page
Solution to the problems of AFM inside a professional glove box: EC
cell made for easy to handle
Page
Solution to the problems of AFM inside a professional glove box: EC
cell made for easy to handle
Page
In-situ observation of SEI on HOPG electrode surface during charging
circle of a Li ion battery cell—the first circle
Page
In-situ observation of SEI on HOPG electrode surface during charging
circle of a Li ion battery cell—the first circle
AFM images of HOPG
surface scanned at a
synchronous discharge
voltage range of
a) 3.0 e 2.95 V;
b) b) 1.7 e 1.65 V;
c) c) 1.0 e 0.95 V;
d) d) 0.5 e 0.45 V;
e) e) 0.1 e 0.05 V.
Scan area 25 mm2.
Page
In-situ observation of bottom SEI on HOPG electrode surface during
charging circle of a Li ion battery cell—the first circle
AFM images of bottom SEI layer:
a) pristine HOPG;
b) b) discharge to 1.7 V;
c) c) discharge to 0.5 V;
d) d) discharge to 0.02 V.
Scan area 25 mm2.
Page
In-situ observation of SEI on HOPG electrode surface during charging
circle of a Li ion battery cell—the first circle
Schematic of SEI evolutions during the first discharge process.
a) The solvent decomposition product (purple dots) deposits at the surface of the graphite;
b) the solvated lithium ions (gray dots) pass through the particle layer and intercalated into the graphite layer (black lines);
c) solvent decomposition products accumulate at the surface when the
lithium intercalation takes places;
d) the displacement of the graphite layer caused by the lithium intercalation pushes the top particle layer off the HOPG surface;
Page
In-situ observation of SEI on HOPG electrode surface during charging
circle of a Li ion battery cell—the delamination of the first SEI layer
Page
In-situ observation of SEI on HOPG electrode surface during charging
circle of a Li ion battery cell- the bottom SEI
Page
In-situ observation of SEI on HOPG electrode surface during charging
circle of a Li ion battery cell- the bottom SEI
Page
In-situ observation of SEI on HOPG electrode surface during charging
circle of a Li ion battery cell- the bottom SEI is a soft layer
Center framed area scanned at higher force (10nN)
Page
On going work
Page
On-going work: mechanical properties measurement of mechanical
properties of SEI of Li battery cell
Page
Future work: Better solution to the problems of AFM inside a
professional glove box: EC cell made for easy to handle and resist to
corrosion
Page
Future work: EC AFM cell for Litihium Cell with heating and cooling
option
Page
Future work: EC AFM cell for Litihium Cell with oxygen feed to a porous
sample electrode
Page
Some small inventions: Sample transfer holder from glove box to SEM /
XPS
Page
Conclusion:
We observed Litihum battery SEI formation in-situ in real time
future:
Mechanical property measurement of SEI on HOPG electrode surface
during charging circle of a Li ion battery cell
Temperature based study: heating and cooling