FINAL DOCUMENT CERTIFICATION RELEASE PACK INDEX CHECK SHEET Customer Order No Customer Customer Item No. Cast No. 98196 2021-1235 1 Abbey Order No. 57780 Certification requirements - whenever appears below, the following documents are required and attached within the certification pack. ü FINAL DOCUMENT CERTIFICATION RELEASE PACK CONTAINS Applicable Attached Date Comp Abbey Certificate of Analysis and Test þ þ 98196 - 1 Issue 1 2021-04-13 MPQP / Quality Plan o o Abbey Deviation / Concession o o Customer Drawing o o Material Mill Certificate / Supplier Certificate þ þ 718788 REV 00 2020-06-29 Heat Treatment Charts þ þ 57255 2021-03-30 Furnace Load Plan o o Hardness Report o o Test Location Drawing þ þ AFP-MS5-TP-BLANK>50 REV 0 Mechanical Test Certificate þ þ 21C 0775 21C 0775 A1 2021-04-12 Check Analysis Certificate þ þ 21C 0775 21C 0775 A1 2021-04-12 Metallurgical Report þ þ 21C 0775 21C 0775 A1 2021-04-12 CMM Dimensional Report o o Dimensional Report o o Visual Examination Report o o Ultrasonic Examination Report * þ þ U118680 2021-04-08 Magnetic Particle Examination Report * o o Dye-Penetrant Examination Report * þ þ DP42899 2021-04-09 Positive Material Inspection (PMI) Report þ þ P10430 2021-04-08 Ferritescope Report o o First Article Inspection Report (FAIR) o o BS EN 10204 3.1 Certificate þ þ BS EN 10204 3.2 Certificate o o PED Certificate o o Operator Qualifications (*Where Applicable) þ þ Calibration Certificates o o I hereby confirm that all the required applicable documents are contained and attached and the order reference detail/numbers are correct. Signed Date Mark Stones 13/04/2021 Authorised Signatory Abbey QA Department AFP DOC 097 Rev 4
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
FINAL DOCUMENT CERTIFICATION RELEASE PACK
INDEX CHECK SHEET
Customer Order No
Customer Customer Item No.
Cast No.
98196 2021-1235
1
Abbey Order No.
57780
Certification requirements - whenever appears below, the following documents are required and attached within the certification pack.ü
FINAL DOCUMENT CERTIFICATION RELEASE PACK CONTAINS
Applicable Attached Date Comp
Abbey Certificate of Analysis and Test þ þ 98196 - 1 Issue 1 2021-04-13
AD 2000 W0/07.2006 according to P.E.D. 2014/68/EU; TUV;
ABBEY-F51 REV:4
Abbey Group Procurement Specification for UNS S31803 F51 hot rolled or
forged bar/billet.
TOLERANCES: ASTM A182/A182M-19
EN 10088-3:2014
DIMENSIONS: 400 MM SQ
PRODUCTION TYPE: FORGING
Sales Item Client Item Delivery No Lot No. Heat No Pieces Weight Un Lgth 60 8120055480 200250224 57780 1 4.190 KG 2000-4000 MM
LOT No BAR No 200250224 11
Rev: 00
Modified on:
We hereby certify that the material herein described has been manufactured, sampled, tested, andinspected in accordance with above standards and specifications and satisfies order#s requirements. Thiscertificate is issued by a computerized system and it is valid without original signature. In case the ownerof the certificate would release as a copy of it, he must attest its conformity to the issued, assuming the
responsibility for any unlawful or TUBACEX, not allowed use. Any forgery or falsification of this certificateshall legally prosecuted.
INSPECTION CERTIFICATEEN 10204:2004 / 3.1
Number: 718788Page: 2 / 3
Created on:Date: 29.06.2020
RAW MATERIAL Heat Nr: Supplier Method 57780 ACERALAVA (SPAIN) Electric furnace+AOD
CHEMICAL COMPOSITION (%) *L: Ladle C:Products * Heat Seq C Mn Si P S Ni Cr Mo Al Cu L 57780 1 0,019 1,08 0,510 0,024 0,0004 5,65 22,50 3,13 0,013 0,23 * Heat Seq Sn V Ti Nb B W Co As Ta N L 57780 1 0,005 0,049 0,003 0,001 0,0021 0,040 0,050 0,004 0,010 0,1685 * Heat Seq Fe Pren Nbvtial L 57780 1 66,5800 35,5250 0,0660 SURFACE FINISH FULLY SURFACE GROUND INGOT REDUCTION
Item Reduction60 2,20
TENSILE TEST Lot No. Sample T Rp0.2 Rm A4 A5 Z Type
°C MPa MPa % % % 200250224
1 20 545 718 34 33 76 T
HARDNESS TEST Lot No. Sample HBW1 HBW2 200250224
1 226 231
IMPACT TEST Lot No. Sample T Wspec Ecv 1 Ecv 2 Ecv 3 Ecv AVG Type Le1 Le2 Le3 Shear 1 Shear 2 Shear 3
Corrosion test ASTM G48 practice A Lot No. Sample T Pits-20x W.loss time
°C g/m2 Horas 200250224
1 30 N 0,0304 24,0
Rev: 00
Modified on:
We hereby certify that the material herein described has been manufactured, sampled, tested, andinspected in accordance with above standards and specifications and satisfies order#s requirements. Thiscertificate is issued by a computerized system and it is valid without original signature. In case the ownerof the certificate would release as a copy of it, he must attest its conformity to the issued, assuming the
responsibility for any unlawful or TUBACEX, not allowed use. Any forgery or falsification of this certificateshall legally prosecuted.
INSPECTION CERTIFICATEEN 10204:2004 / 3.1
Number: 718788Page: 3 / 3
Created on:Date: 29.06.2020
FERRITE ACCORDING TO ASTM E 562 Lot No. Sample %Fer Dev.Ferr MAGN
% % 200250224
1 51,15 2,36 200
MICROINCLUSIONS ACCORDING TO ASTM E45 Lot No. Sample A Thin A Heavy B Thin B Heavy C Thin C Heavy D Thin D Heavy MAGN 200250224
1 0,0 0,0 0,5 0,5 0,5 0,0 1,0 0,5 100
METALURGICAL TESTS
INTERGRANULAR CORROSION TEST ACC. TO DIN 50914/DIN EN ISO 3651-2 MET.A:
SATISFACTORY
NON-DESTRUCTIVE TESTS
ULTRASONIC TESTED ACCORDING TO: CLASS FBH=6; STANDARD ASTM
A-388/SA388/A-745 QL2 SATISFACTORY
STEEL GRADE ASSESMENT BY LASER ANALIZER: WITHOUT OBJECTIONS
REMARKS STAMP OF THE INSPECTION REPRESENTATIVE: AC1 THIS MATERIAL AND THE ELEMENTS USED ALONG MANUFACTURING ARE MERCURY FREE NO WELDING WAS PERFORMED ON THE MATERIAL RADIATION CONTAMINATION TEST: OK TENSION TEST : PERFORMED ON SOLUTION HEAT TREATED SPECIMEN. MATERIAL MANUFACTURER APPROVED BY TÜV SÜD Industrie Service GmbH (NOTIFIED BODY 036)TO ISSUE CERTIFICATES OF SPECIFIC PRODUCT CONTROL IN ACCORDING TO PRESSURE EQUIPMENT DIRECTIVE 2014/68/EU ANNEX 1 POINT 4.3.
Rev: 00
Modified on:
We hereby certify that the material herein described has been manufactured, sampled, tested, andinspected in accordance with above standards and specifications and satisfies order#s requirements. Thiscertificate is issued by a computerized system and it is valid without original signature. In case the ownerof the certificate would release as a copy of it, he must attest its conformity to the issued, assuming the
responsibility for any unlawful or TUBACEX, not allowed use. Any forgery or falsification of this certificateshall legally prosecuted.