ENG. Mahmoud ahmed gaber ayead Welding Engineering/Welding inspector Personal Information's Certifications C-SWIP 3.1 Certificate No. (38448) Aramco Approval E-mail to work As A Welding Engineer/Welding Inspector In Petrorabigh Site (waiting for approval letter) ASNT Level II in Radiographic Test (RT) ASNT Level II in ultrasonic Test (UT) ASNT Level II in Liquid Penetration Test (PT) ASNT Level II in Magnetic Particles Test (MT) level I in Heat treatment for steel (Practical And Theoretical) Basic H 2 s induction and SCBA course from total safety (L.L.C.) From U.A.E OSHA (occupational safety and health administrator)from (AUC) First Aid Training From EDC Skills Languages : Arabic (Native Language),English (very Good) Operating Systems : Windows 98/XP/7 Software : Microsoft Office(Word, Excel, PowerPoint) Programming Languages : Visual Basic 6,Fortran Education University : Suez Canal. Faculty : Engineering. Department : Metallurgy and Material Science Graduation : 73.32 %. +966583284662 [email protected] [email protected] Page 1 of 8 Military service :Exempted Date of birth :25/7/1983 Nationality :Egyptian (location : KSA, Jeddah). Driving license : (Egyptian &Saudi)
Final cv 1 9-2014
Jun 25, 2015
WELDING ENGINEER/ APPROVED ARAMCO WELDING INSPECTOR.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ENG. Mahmoud ahmed gaber ayead
Welding Engineering/Welding inspector
PersonalInformation's
Certifications C-SWIP 3.1 Certificate No. (38448)
Aramco Approval E-mail to work As A Welding Engineer/Welding
Inspector In Petrorabigh Site (waiting for approval letter)
ASNT Level II in Radiographic Test (RT)
ASNT Level II in ultrasonic Test (UT)
ASNT Level II in Liquid Penetration Test (PT)
ASNT Level II in Magnetic Particles Test (MT)
level I in Heat treatment for steel (Practical And Theoretical)
Basic H2s induction and SCBA course from total safety (L.L.C.) From
U.A.E
OSHA (occupational safety and health administrator)from (AUC)
First Aid Training From EDC
Skills Languages : Arabic (Native Language),English (very
Good)
Operating Systems : Windows 98/XP/7
Software : Microsoft Office(Word, Excel, PowerPoint)
Programming Languages : Visual Basic 6,Fortran
Education University : Suez Canal.
Faculty : Engineering.
Department : Metallurgy and Material Science
Graduation : 73.32 %.
+966583284662 [email protected]
[email protected] Page 1 of 8
Military service :Exempted
Date of birth :25/7/1983
Nationality :Egyptian (location : KSA, Jeddah).
Driving license : (Egyptian &Saudi)
ProfessionalExperience
A .QC & Welding Engineer/Welding Inspector
In ALZAMIL METAL WORK FACTORY (KSA)(1-1-2013 to till date)
Duties of this Position:
o Checking Material
o Making WPS, PQR
o Training the welders for qualification
o Liaise with third party and various customers for witnessing
welder qualification test and procedure qualifications.
o Monitoring the calibration of welding equipments and
maintaining the records of calibrations.
o Maintaining the welder continuity and update the renewal
qualification records.
o Reviewing the certificates for welding consumables.
o Monitoring the storage, holding, baking and drying of welding
consumables as per company and Saudi ARAMCO
specifications.
o Familiar with different types of materials of construction
which includes Carbon steels, Stainless steels, Low Alloy
Steels and other Corrosion Resistant Alloys.
o Shall be capable of reviewing welding procedures, PMI
Procedures, PWHT & Hardness Procedures.
Preparing weld maps
o Welding Inspection offshore structures and process piping
o Preparation of NDT request, monitoring the execution of NDT
and reviewing reports.
+966583284662 [email protected] Page 2 of 8
ProfessionalExperience
o Monitoring Pre heating, Inter pass temperature, Post weld heat
treatment and Control & Storage of Welding Consumables
,Perform Hardness testing.
o Interpretation of radiographs for various projects with different
specs and codes.
o Dimensional Survey
o Preparing QC File &NDE Documentations
o Working with codes ASMEIX, II, V, VIII, B31.3, B31.4, API
1104, 650, 653, ASTM etc..
o Familiar with Saudi ARAMCO specifications e.g. 32-SAMSS-
005, SAES-W-017, SAES-W-010, SAES-W-011 etc.
o Preparation of Weld traceability, Test package, Test reports.
o Coordinating Quality Audit and take appropriate corrective
and preventive actions for the closing out the NCR and CAR's
o Maintain and execute equipment calibration & records.
Project :
MAADEN (KSA)
o Construction of 4 storage tanks for maaden company
(Total weight 236 ton, carbon steel, Dia. 24,28,29 &29m)
ALTUKHY (KSA)
o Construction of 3 storage tanks
(Total weight 1498 ton, carbon steel, Dia.31 & 33m)
+966583284662 [email protected] Page 3 of 8
ProfessionalExperience LUBEREF (KSA) ARAMCO JOB
o Maintenance of 2 storage tanks.
(Replacing of bottom, 3 shell courses and roof, carbon steel)
GSE&C (KSA) ARAMCO JOB
Rabigh II refining and petrochemical project (CP 3,4)
o Construction of 33 SS 304 tanks. (Running)
(Total weight 267 ton, Dia. From 4 – 8m).
HHI (KSA)
o 9 tanks at Jeddah south thermal power plant, carbon steel,
Dia.42 &45 m
o Boiler Air Ducts. (Running)
(Total weight 27714 ton)
PETROFAC (KSA) ARAMCO JOB
Rabigh II refining and petrochemical project (utility, south and north
area)
o Construction of 33 CS storage tanks. (Running)
(Total weight 8900 ton, Dia. From 12m to 45m)
BEMCO (KSA)
+966583284662 [email protected] Page 4 of 8
ProfessionalExperience ST area condensate receiver A, B, C.
o Construction of 6 pressure vessels. (running)
(Total weight 58 ton, low alloy steel (P4))
EL-SEIF (KSA)
Sand trap box.
o Construction of 256 boxes. (running)
In Alexandria Petroleum Maintenance co.( Petromaint )(1-1- 2007 to 20-12-2012)
Duties of this Position:
o Training the welders for qualification
o Liaise with third party and various customers for witnessing
welder qualification test and procedure qualifications.
o Monitoring the calibration of welding equipments and
maintaining the records of calibrations.
o Maintaining the welder continuity and update the renewal
qualification records.
o Reviewing the certificates for welding consumables.
(Total weight 744 ton, stainless steel 316 (P8))
+966583284662 [email protected] Page 5 of 8
ProfessionalExperience
o Preparing weld maps
o Welding Inspection of structures and process piping
o Preparation of NDT request, monitoring the execution of NDT
and reviewing reports.
o Monitoring Pre heating, Inter pass temperature, Post weld heat
treatment and Control & Storage of Welding Consumables
,Perform Hardness testing.
o Interpretation of radiographs for various projects with different
specs and codes.
o Dimensional Survey
o Preparing QC File &NDE Documentations
o Working with codes ASMEIX, II, V, VIII, B31.3, B31.4, API
1104, 650, 653, ASTM etc..
o Coordinating Quality Audit and take appropriate corrective and
preventive actions for the closing out the NCR
Project :
SOUTH DABAA
o Fabrication of Fire Water System
o Fabrication Of Pig Launcher System
o Fabrication Of (LTS) Low Temperature Separator System
o Construction of the Gas Plant pipelines, pressure vessels,
manifolds, tanks, steel structures.
AGIBA:
+966583284662 [email protected] Page 6 of 8
ProfessionalExperience
o Zarif Tanks Piping Network
o Fabrication of 15 Tanks 1000BBL
PETROBEL
o Maintenance & Inspection on Temsah Glycol Regeneration
Unit (GR1&GR2)
o Maintenance Of Tank 28 At Belayim Power Station
o Trunk oil pipeline from 10/1 to feiran terminals
o Fire alarm and fire fighting system at t/b 6-1
GUPCO
o Fabrication of Two Manifolds for Abo Elgharadik Fields
o Fabrication & Erection of flow Pipeline Well head connection
18&32
B. Welding Inspector
In International Company for Industrial Development (DEVCO)
(20-11- 2005 to 20-12- 2006)
+966583284662 [email protected] Page 7 of 8
Duties:
o Welding Inspection offshore structures and process piping
o Preparation of NDT request, monitoring the execution of NDT
and reviewing reports.
o Monitoring Pre heating, Inter pass temperature, Post weld heat
treatment and Control & Storage of Welding Consumables
o Interpretation of radiographs for various projects with different
specs and codes.
PHARAOH GOLD MINE
o Construction Of All Piping Networks (Diesel Oil, Lube Oil,
Cooling Water, Flare, Heavy Oil Line)
o Construction Of 11 Tanks For Gold Concentration Cycle
EPCC
o Construction of 10” St. St. Pipeline connecting R/O unit to Demine
water area
+966583284662 [email protected] Page 8 of 8
Related Documents
