Filter part list

1

The Part List of water filter

▪ 2 Way High Pressure Solenoid Valve-------------------------------------P2

▪ 2 Way Low Pressure Solenoid Valve--------------------------------------P3

▪ 2 Way High Pressure Solenoid Valve-------------------------------------P4

▪ 3 Way Out Changable Solenoid Valve------------------------------------P5

▪ 3 Way Low Pressure Solenoid Valve--------------------------------------P6

▪ Restrictor-------------------------------------------------------------------P7

▪ Regulator------------------------------------------------------------------P8

▪ Dust filter------------------------------------------------------------------P10

▪ Check Valve----------------------------------------------------------------P11

▪ Bulkhead-------------------------------------------------------------------P12

▪ Ball top--------------------------------------------------------------------P13

2

▣ 2 Way High Pressure Solenoid Valve

Model No. 2WHP-TB1-N6N6

Using Control to shut the water flow on and off

Power AC 110V, 220V, DC 12V, 24V

Working pressure Under 10kgf/cm2

Size of In and Out Nipple type 6.4mm, 8.0mm, 9.5mm

Fitting type 6.4mm

3

▣ 2 Way Low Pressure Solenoid Valve

Model No. 2WHP-TB1-N6N6

Using Control to shut the water flow on and off

Power DC 12V, 24V

Working pressure 50cm/H2O

Water flow 200cc/5sec at 20cm/H2O

4

▣ 2 Way High Pressure Solenoid Valve

Model No. 3WHP-TB2-N8N8

Using Control to shut the water flow on and off for 1 input and 2 output

Power AC 110V, 220V, DC 12V, 24V

Working pressure 0.2kgf/cm2 ~ 10kgf/cm2

5

▣ 3 Way Out Changable Solenoid Valve

Model No. 3WHS-T1-N6N6

Using Change the flow way to out1 and out2 by the controlling the bobbin.

Power DC 12V, 24V

Working pressure 0.5kgf/cm2 ~ 3.0kgf/cm2

Water flow over 1.5 liter / min at 3kgf/cm2

6

▣ 3 Way Low Pressure Solenoid Valve Model No 3WLD-TB2-N8N8

Using Control the one input to 2 output at the same time.

Power AC 110V, 220V DC 12V, 24V

Working Pressure 50cm/H2O

7

▣ Restrictor This restrictor controls flow rate of waste water for RO filter.

Model ID(input) OD(output) cc/min

FRD-F6F6-250 1/4” 1/4” 250

FRD-F6F6-350 1/4” 1/4” 350

FRD-F6F6-500 1/4” 1/4” 500

FRD-F6F6-800 1/4” 1/4” 800

8

▣ Regulator

REC-F6N6

Purpose of using

- To make stable and regular water follow pressure

Specification

Using pressure

1. Maximum : 10 kgf / cm2

2. General : 3kgf / cm2

9

Model ID(input) OD(output) L1 L2 L3

REC-N6N6 1/4” 1/4” 38.0 62.0 50.4

REC-N6F6 1/4” 1/4” 38.0 59.6 50.4

REC-F6N6 1/4” 1/4” 38.0 59.6 50.4

REC-F6F6 1/4” 1/4” 38.0 57.2 50.4

REC-N8N8 5/16” 5/16” 38.0 62.0 50.4

REC-N8F8 5/16” 5/16” 38.0 59.6 50.4

REC-F8N8 5/16” 5/16” 38.0 59.6 50.4

REC-F8F8 5/16” 5/16” 38.0 57.2 50.4

10

▣ Dust Filter

This filter removes the dust before ball top.

Mesh inch / 100mesh

Working pressure 0.2kgf/cm2~10kgf/cm2

11

▣ Check Valve

- This valve allows the water to flow through it in only one direction.

- Working pressure : 0.2kgf/cm2~7kgf/cm2

12

▣ BulkHead

13

▣ Ball top

- This valve shut off and one the water service tube by the buoyancy of plastic ball.

- Maximum water pressure 7kgf/cm2

- Flow rate 1.5liter / min (at 3kgf/cm2)