This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
DRAPER HAND FILE 6" hand file with one safe edge, carbonchrome steel, hardened and tempered with a rust preventative fin-ish.
CODE TYPE PRICE60202 Draper Hand File Bastard Cut 6".......................... £3.5060207 Draper Hand File Second Cut 6".......................... £3.9960212 Draper Hand File Smooth Cut 6".......................... £4.50
DRAPER FLAT FILE 6" flat file made of carbon chrome steel.Hardened and tempered with a rust preventative finish.
TOMÉ ENGINEERS FILESThe Tomé File Company, founded well over 100 years ago has progres-sively developed to now be recognised as one of Europe's premier filemanufacturers. With the Company's own steel plant and rolling mills, strictquality control checks are enforced from raw material selection to finishedproduct. All Tomé Files are manufactured from chromium steel and con-form to dimensional and density of cut tolerances within the ISO standards.
TOMÉ HAND FILES parallel in width and thickness for wholelength. Cuts on both faces and one side, one side safe edge.Available in Bastard, Second and Smooth cuts, 4" & 6" lengths.
CODE TYPE PRICEF12095 Hand File Bastard Cut 4"...................................... £3.69F12096 Hand File Bastard Cut 6"...................................... £4.20F12102 Hand File Second Cut 4"...................................... £3.99F12103 Hand File Second Cut 6"...................................... £4.75F12108 Hand File Smooth Cut 4"...................................... £4.90F12109 Hand File Smooth Cut 6"...................................... £5.39
TOMÉ FLAT FILES parallel in thickness, tapered width, with cutson all faces. Available in Bastard, Second and Smooth Cuts 4" &6" lengths.
TOMÉ WARDING FILES parallel in thickness, tapered width, cutson all faces, half the thickness of Flat file. Available in Bastard,Second and Smooth Cuts, 4" & 6" lengths.
TOMÉ PILLAR FILES slightly tapered in thickness parallel inwidth, cuts on both sides and one edge. Available in Bastard,Second and Smooth Cuts, 4" & 6" lengths.
TOMÉ KNIFE FILES tapered in thickness to bottom edge like aknife blade, tapers towards end, cuts on both sides and bottomedge. Available in Bastard, Second and Smooth Cuts, 4" & 6"lengths.
TOMÉ THREE SQUARE FILES tapered triangular section, cuts onall faces. Available in Bastard, Second and Smooth Cuts, 4" & 6"lengths.
CODE TYPE PRICEF12168 Three Square File Bastard Cut 4"........................ £4.75F12169 Three Square File Bastard Cut 6"........................ £4.25F12173 Three Square File Second Cut 4"......................... £4.90F12174 Three Square File Second Cut 6"......................... £5.49F12177 Three Square File Smooth Cut 4"........................ £5.49F12178 Three Square File Smooth Cut 6"........................ £5.99
HARDWOOD FILE HANDLES shaped handles with steel ferrulefor use with above engineers filesand other manufacturers files.
DRAPER NEEDLE FILE HAND SECOND CUT 160mm a needlefile for intricate work. Manufactured from high carbon/chromesteel, hardened and tempered to HRC 62-64 files.
CODE TYPE PRICE63391 Draper Needle File Hand Second Cut 160mm..... £1.50
DRAPER NEEDLE FILE FLAT SECOND CUT 160mm a needlefile for intricate work. Manufactured from high carbon/chromesteel, hardened and tempered to HRC 62-64 files.
CODE TYPE PRICE63392 Draper Needle File Flat Second Cut 160mm........ £1.50
DRAPER NEEDLE FILE H/RND SECOND CUT 160mm a needlefile for intricate work. Manufactured from high carbon/chromesteel, hardened and tempered to HRC 62-64 files.
CODE TYPE PRICE63393 Draper Needle File H/Rnd Second Cut 160mm... £1.50
DRAPER N/FILE 3 SQUARE SECOND CUT 160mm a needle filefor intricate work. Manufactured from high carbon/chrome steel,hardened and tempered to HRC 62-64 files.
CODE TYPE PRICE63394 Draper N/File 3 Square Second Cut 160mm........ £1.50
DRAPER NEEDLE FILE SQUARE SECOND CUT 160mm a nee-dle file for intricate work. Manufactured from high carbon/chromesteel, hardened and tempered to HRC 62-64 files.
CODE TYPE PRICE63395 Draper Needle File Square Second Cut 160mm.. £1.50
DRAPER NEEDLE FILE SQUARE SECOND CUT 160mm a nee-dle file for intricate work. Manufactured from high carbon/chromesteel, hardened and tempered to HRC 62-64 files.
CODE TYPE PRICE63396 Draper Needle File Round Second Cut 160mm... £1.50
TOMÉ SWISS PATTERN NEEDLE FILESSWISS PATTERN NEEDLE FILES for intricate work. All shapes are6¼"/160mm length. 8 shapes available, in 2 cuts No 0 - Coarse, No 2 -Medium and No 4 Fine.
TOMÉ SWISS PATTERN HAND NEEDLE FILE parallel in widthand thickness for whole length, cuts on both faces and sides.
CODE TYPE PRICEN32949 Hand Needle File Cut No 0................................... £2.75N12357 Hand Needle File Cut No 2................................... £2.75N12366 Hand Needle File Cut No 4................................... £2.75
TOMÉ SWISS PATTERN FLAT NEEDLE FILE parallel thickness,width tapers to a fine point, cuts on both faces and sides.
CODE TYPE PRICEN32950 Flat Needle File Cut No 0..................................... £2.75N12358 Flat Needle File Cut No 2..................................... £2.75N12367 Flat Needle File Cut No 4..................................... £2.75
TOMÉ SWISS PATTERN HALF ROUND NEEDLE FILE width andthickness taper to a fine point, cuts on both faces.
CODE TYPE PRICEN32951 Half Round Needle File Cut No 0......................... £2.75N12359 Half Round Needle File Cut No 2......................... £2.75N12368 Half Round Needle File Cut No 4......................... £2.75
TOMÉ SWISS PATTERN THREE SQUARE NEEDLE FILE trian-gular in section tapering to a fine point, cuts on all faces.
CODE TYPE PRICEN32952 Three Square Needle File Cut No 0..................... £2.75N12360 Three Square Needle File Cut No 2..................... £2.75N12369 Three Square Needle File Cut No 4..................... £2.75
TOMÉ SWISS PATTERN SQUARE NEEDLE FILE square sectiontapering to a fine point, sharp corners, cuts on all faces.
CODE TYPE PRICEN32953 Square Needle File Cut No 0................................ £2.75N12361 Square Needle File Cut No 2................................ £2.75N12371 Square Needle File Cut No 4................................ £2.75
TOMÉ SWISS PATTERN ROUND NEEDLE FILE circular crosssection tapering to a fine point, cut over whole face.
CODE TYPE PRICEN32954 Round Needle File Cut No 0................................. £2.75N12363 Round Needle File Cut No 2................................. £2.75N12372 Round Needle File Cut No 4................................. £2.75
TOMÉ SWISS PATTERN CROSSING NEEDLE FILE oval sectionwith 2 convex radii, tapering to a fine point, cuts on both faces.
CODE TYPE PRICEN32956 Crossing Needle File Cut No 0............................. £2.75N12365 Crossing Needle File Cut No 2............................. £2.75N12374 Crossing Needle File Cut No 4............................. £2.75
TOMÉ SWISS PATTERN KNIFE NEEDLE FILE tapered knifeform with a flat vee section, cuts on both faces and bottom edge.The top edge of the file is a safe edge.
CODE TYPE PRICEN32955 Knife Needle File Cut No 0................................... £2.75N12364 Knife Needle File Cut No 2................................... £2.75N12373 Knife Needle File Cut No 4................................... £2.75
TOMÉ SWISS PATTERN BARRETTE NEEDLE FILE triangular insection tapering to a fine point, cut on bottom face only.
CODE TYPE PRICE060-050 Barrette Needle File Cut No 0.............................. £2.75060-052 Barrette Needle File Cut No 2.............................. £2.75060-054 Barrette Needle File Cut No 4.............................. £2.75
TOMÉ SWISS PATTERN SLITTING NEEDLE FILE lozengeshaped section with 4 sides, parallel in width for whole length,thickness tapers to the edges. Cut on four faces and both edges.
CODE TYPE PRICE060-056 Slitting Needle File Cut No 0................................ £2.75060-058 Slitting Needle File Cut No 2................................ £2.75060-060 Slitting Needle File Cut No 4................................ £2.75
SQUIRES MODEL & CRAFT TOOLS
TEL. 01243 842424 - FAX. 01243 84252586
NEEDLE FILE HANDLES
NEEDLE FILE HANDLE manufactured from ABS and features abrass collet chuck. Accepts all regular needle files with roundshafts from 2.5 - 3.5mm dia.
CODE TYPE PRICENFH010 Needle File Handle............................................... £2.99
WOODEN NEEDLE FILE HANDLE a high quality shaped woodenneedle file handle with a brass collet chuck. Accepts all regularneedle files with round shafts from 2.5 - 3.5mm dia. Length115mm.
CODE TYPE PRICENFH015 Wooden Needle File Handle................................. £3.99
NEEDLE FILE SETS
12 PIECE MINIATURE NEEDLE FILE SET 100 x 2MM a set ofmedium cut miniature needle files which are only 100mm lengthand 2mm diameter at the tang. The set contains the most popularshapes including Hand, Flat, Round, Half Round, Crossing,Barrette, Knife, Three Square. Supplied in a plastic wallet.
CODE TYPE PRICEFLN005 12 Piece Miniature Needle File Set 100 x 2mm... £4.99
12 PIECE MINIATURE NEEDLE FILE SET 100 x 3MM a set ofmedium cut miniature needle files which are only 100mm lengthand 3mm diameter at the tang. The set contains the most popularshapes including Hand, Flat, Round, Half Round, Crossing,Barrette, Knife, Three Square. Supplied in a plastic wallet.
CODE TYPE PRICE060-148 12 Piece Mini Needle File Set 100mm x 3mm...... £4.50
10 PIECE NEEDLE FILE SET supplied in a plastic wallet, mediumcut, length 140mm with a 3mm diameter tang. The set containsthe most popular shapes including Round, Flat, Hand, Half Round,Square, Three Square etc.
CODE TYPE PRICEFLN010 10 Piece Needle File Set 140mm......................... £4.99
DRAPER 6 PIECE NEEDLE FILE SET a good quality set of medi-um cut needle files hardened and tempered with sand blasted fin-ish. Two-tone soft-grip handles. The set contains flat parallel, flattaper, half round, three square, square and round files. Suppliedin a plastic storage wallet. Length 140mm.
CODE TYPE PRICE63635 Draper Needle File Set of 6 with S/Grip Handles. £6.99
6 PIECE NEEDLE FILE SET a good quality set of medium cutneedle files hardened and tempered. Fitted with two-tone soft-griphandles. The set contains flat parallel, flat taper, half round, threesquare, square and round files. Supplied in a plastic storage box.Length 140mm x 3mm.
CODE TYPE PRICE060-615 6 P/c N/File Set with Soft Grip Handles in Box..... £6.99
SAME DAY DISPATCH FOR ORDERSPLACED UP TO 4.00PM
POST FREE DELIVERYON ALL ORDERS WITHINTHE UNITED KINGDOM
12 PIECE NEEDLE FILE SET a good quality set of medium cutneedle files hardened and tempered. Each file has a hard plastichandle. The set contains flat hand, flat taper, joint, taper round,half round, square, three square, oval, crossing, crochet, barretteand knife with moulded plastic handles. Supplied in a plastic wal-let.
CODE TYPE PRICE36325 Draper 12 P/c N/File Set with Plastic Handles..... £10.99
10 PIECE LARGE NEEDLE FILE SET WITH DIPPED HANDLESsupplied in a plastic wallet, with a medium coarse cut, length180mm with a 5mm diameter. The handles have been singledipped for improved grip and user comfort. The set contains themost popular shapes including Hand, Flat, Half Round, Square,Three Square, Knife etc.
CODE TYPE PRICE060-077 10 P/c Lge Needle File Set - Dipped Handles...... £6.99
WARDING FILE SETS
6 PIECE MINI WARDING FILE SET a set of mini warding filessupplied in a plastic wallet. The shapes include Square, ThreeSquare, Round, Half Round, Hand and Coarse Triangular. Thefiles are 100mm and each fitted with a plastic handle. Length overall150mm.
CODE TYPE PRICE060-102 6 Piece Mini Warding File Set.............................. £4.99
DRAPER 6 PIECE WARDING FILE SET supplied in a plastic wal-let. The shapes include Square, Three Square, Round, HalfRound, Hand and Coarse Triangular. The files are 170mm andeach fitted with a plastic handle.
CODE TYPE PRICEFLW060 Draper 6 Piece Warding File Set.......................... £8.99
6 PIECE WARDING FILE SET a good quality set of medium cutwarding files hardened and tempered. Fitted with two-tone soft-grip handles. The set contains flat parallel, flat taper, round,square, three square, and half round files. Supplied in a plasticstorage box. Length 170mm x 4mm.
CODE TYPE PRICE060-645 6 P/c Warding File Set with S/G Handles in Box.. £8.99
RIFFLER FILE SET
PIECE RIFFLER FILE SETS hobby sets of riffler files used forworking in confined spaces etc. Similar to those used by watch-makers and jewellers. The shapes include Round, Flat andSquare etc. Medium cut, file length 140mm and 180mm. Suppliedin a handy plastic wallet.
CODE TYPE PRICEFLR020 10 Piece Riffler File Set 140mm........................... £5.99060-180 10 Piece Riffler File Set 180mm........................... £6.99
SQUIRES MODEL & CRAFT TOOLS
TEL. 01243 842424 - FAX. 01243 84252588
DIAMOND NEEDLE FILE SETS
MINIATURE DIAMOND NEEDLE FILE SETS high quality industri-al grade miniature needle files coated with diamond grit enablingthem to file materials such as tungsten carbide, carbon, glass,ceramics and hardened steel etc. Available in a 5 piece set con-taining:- Hand, Round, Half Round, Square and Three Square.The 10 piece set contains the 5 listed and also:- flat, barrette, oval,knife and crossing. Length 100mm, the diamond grit covering is40mm. Suppliedin a plastic wallet.
DIAMOND NEEDLE FILE SETS high quality industrial grade nee-dle files coated with diamond grit enabling them to file materialssuch as tungsten carbide, carbon, glass, ceramics and hardenedsteel etc. The 5 piece set contains:- Hand, Round, Half Round,Square and Three Square. The 10 piece set contains:- Hand,Round, Half Round, Square, Three Square, Flat, Knife, Barrette,Crossing and Round Oval. Length 140mm, the diamond grit cov-ering is 50mm.Packed in aplastic wallet.
5 PIECE DIAMOND COATED NEEDLE FILE SET a five piece setof the most popular shapes ideal for intricate work. Diamond coat-ed with 150 grit, and soft rubber cushion grips. The shapesinclude:- Hand, Flat, Half Round, Round and Square. Length:140mm
CODE TYPE PRICE060-621 5 Piece Diamond Needle File Set......................... £6.99
DIAMOND WARDING FILE SET high quality diamond wardingfiles supplied in a plastic wallet. The diamond grit enables them tofile hard materials such as tungsten carbide, carbon, glass, ceram-ics and hardened steel. The shapes include Hand, Half Round,Square, Three Square, Round, Flat, Knife, Barrette, Crossing andOval. The files have a PVC grip and the diamond covering is70mm. The filelength is 180x 5mm.
CODE TYPE PRICE060-174 10 Piece Diamond Warding File Set 180mm........ £9.99
DIAMOND FEATHER EDGE FILE
DIAMOND GRIT FEATHER EDGE FILE a diamond grit featheredge file with a shaped wooden handle. Suitable for shaping orremoving excess from materials including plastics, fibreglass, plas-ter, laminates, nonferrous metals, wood, tiles etc. Diamond gritcovering 65mm, length overall 180mm.
CODE TYPE PRICE060-613 Diamond Feather Edge File 180mm..................... £5.99
IGNITION FILE
IGNITION FILE a thin ignition file that is quite useful because of itsthin flat profile. It has points and spark plug gauges fitted withthicknesses of 0.381mm (0.015") and 0.625mm (0.025") respec-tively. The file is flat and parallel, medium cut. Length overall140mm, width 8mm, thickness 1.10mm.
CODE TYPE PRICE33554 Ignition File........................................................... £1.89
FILE CLEANING BRUSH
FILE CLEANING BRUSH a file card mounted on a wooden handlefor removal of swarf and filings from the cutting surface of files.Particularly useful when filing soft materials which tend to clog fileseasily. File card dims:- 100 x 25mm. Length overall 210mm.
CODE TYPE PRICEFCB005 File Cleaning Brush.............................................. £3.99
PERMA-GRIT TOOLS
Perma-Grit Tools are Tungsten Carbide Tools which is very hardand will last for years. Used by professional craftsman, hobbyistand DIY users. They cut, file, sand and shape. Ideal for use onwoods, plastics, all composites, fibreglass, brick, stone, foam,ceramics and glass. The tools can be cleaned with any solvent.
PERMA-GRIT NEEDLE FILES standard pattern needle files butwith Tungsten Carbide grit bonded to the file. Ideal for small work-pieces. The set contains one each of knife, square, hand, roundand 3-square and a needle file handle. The files are also availableindividually.
PERMA-GRIT RIFFLER FILES single ended riffler files withTungsten Carbide grit bonded to the file. Ideal for small work-pieces and intricate shapes. The set contains one each of square,round, hand, 3-square and half round together with a needle filehandle. The files areavailable individually.
PERMA-GRIT FLAT FILE a flat sanding/filing tool with the grit cov-ering over the full length of the tool, ideal for cleaning slots and forworking where a sanding block would be too large. Available inFine or Coarse. Dims 230 x 38mm.
PERMA-GRIT ROUND FILES the Tungsten Carbide grit is bondedto a steel tube which forms the profile of the file and it is also thehandle. Available in 12mm and 18mm diameters, Fine andCoarse.
CODE TYPE PRICER203F 12mm Dia Steel Tube Fine................................... £8.19R203C 12mm Dia Steel Tube Coarse.............................. £8.19R202F 18mm Dia Steel Tube Fine................................... £9.19R202C 18mm Dia Steel Tube Coarse.............................. £9.19
PERMA-GRIT CONVEX FILE a convex sanding tool with the gritcovering over the full length of the tool. Ideal for rough shapingetc. Available in Fine and Coarse. Length 230mm x 26mm.
CODE TYPE PRICER200F Perma-Grit Convex File Fine 26mm..................... £7.65R200C Perma-Grit Convex File Coarse 26mm................ £7.65
PERMA-GRIT CONCAVE FILE a concave file with the grit cover-ing over the full length of the tool. Ideal for rounding edges, lead-ing edges on wings and tailplanes etc. Available in Fine andCoarse. Length 230mm x 26mm.
CODE TYPE PRICER101 Perma-Grit Concave File Fine 230mm................. £7.65R102 Perma-Grit Concave File Coarse 230mm............ £7.65
PERMA-GRIT ANGLE FILE an angular tool which has the gritcovering over the full length. Used for shaping and finishing cor-ners, inside angles etc. The tool will produce either a sharp corneror a 1/8” radius. Available in Fine and Coarse. Length 230mm x38mm.
CODE TYPE PRICER201F Perma-Grit Angle File Fine 230mm...................... £7.65R201C Perma-Grit Angle File Coarse 230mm................. £7.65
PERMA-GRIT TOOL SETS a set of 8 tools supplied in a tool rollwith velcro fastener. The tool wallet is also available separately. SET8C Contains 1 each of F101, F102, R200C, R201C, R202C, R203C,R204C, S204C all in a wallet.SET8F Contains:-F101, F102, R200F, R201F, R202F, R203F, R204F,S204F all in a wallet.
CODE TYPE PRICETR1 Tool Wallet............................................................ £3.99SET8F 8 Tools In Wallet Fine........................................... £55.99SET8C 8 Tools In Wallet Coarse...................................... £55.99
TUNGSTEN CARBIDE GRIT FILES
CARBIDE GRIT FILE a carbide grit file suitable for forming orremoving stock from most materials including plastics, fibreglass,plaster, laminates, non-ferrous metals, etc. The combination flatfile has one coarse side and one fine. Fitted with a plastic handle.
CODE TYPE PRICE29388 200mm Carbide Grit Flat File Fine/Coarse........... £11.99
SQUIRES MODEL & CRAFT TOOLS
TEL. 01243 842424 - FAX. 01243 84252590
BROACHES
BROACHES traditionally a watch and clock makers tool, cuttingbroaches for the gentle enlarging or sizing of holes, smoothingtypes are usedfor burnishingto a fine finish.Made inGermany.
BRC010 6 P/c Cutting Broach Set 0.4 - 1.4mm.................. £10.49BRC015 6 P/c Cutting Broach Set 0.6 - 2.0mm.................. £11.99BRC016 6 P/c Cutting Broach Set 1.2 - 3.0mm.................. £17.99BRC197 6 P/c Cutting Broach Set 2.2 - 6.0mm.................. £39.99BRS020 6 P/c Smoothing Broach Set 0.4 - 1.4mm............ £10.49BRS025 6 P/c Smoothing Broach Set 0.6 - 2.0mm............ £12.99BRS030 6 P/c Smoothing Broach Set 1.2 - 3.0mm............ £17.99BRS205 6 P/c Smoothing Broach Set 2.2 - 6.0mm............ £39.99
12 PIECE MINIATURE CUTTING BROACH SET a low cost set ofcutting broaches for enlarging holes in brass etc. Ideal for model-ling and craft work.These are not fittedwith a handle andare best used with a pin vice. Sizes 0.3mm- 0.65mm, supplied ina plastic tube.
CODE TYPE PRICEBRC200 12 P/C Mini Cutting Broach Set 0.3 - 0.65mm...... £4.99
BROACH SETS a range of low cost cutting and smoothing broachsets. Cutting broaches for the gentle enlarging or sizing of holes,smoothing types are used for burnishing to a fine finish. Ideal formodelling andcraft work.Supplied in aplastic wallet.
CODE TYPE PRICEBRC250 6 Piece Cutting Broach Set 0.8 - 2.0mm.............. £9.99BRC372 6 Piece Cutting Broach Set 1.2 - 3.2mm.............. £18.99BRC373 6 Piece Cutting Broach Set 2.4 - 6.0mm.............. £25.99BRS377 6 Piece Smoothing Broach Set 1.2 - 3.2mm........ £18.99BRS378 6 Piece Smoothing Broach Set 2.4 - 6.0mm........ £25.99
12 PIECE CUTTING BROACH SET a low cost set of cuttingbroaches for enlargingholes in brass etc.Ideal for modellingand craft work. Sizes0.8mm - 3.0mm,supplied in aplastic tube.
CODE TYPE PRICEBRC300 12 Piece Cutting Broach Set 0.8 - 3.0mm............ £12.99
TAPERED REAMERS
BEADING AWL a miniature sharp point awl with a hardwood han-dle. Use for bead knotting or cleaning out bead holes. Length145mm.
CODE TYPE PRICE060-641 Miniature Beading Awl.......................................... £3.99
BEADING DIAMOND BEAD REAMER a high quality diamondreamer used for cleaning and enlarging holes in ceramic andglass beads and other hard material beads. The anodise alumini-um handle has a collet system for easy tool changes. Suppliedwith 2 pointed reaming tips and one 45° tip used for smoothinghole edges. Ideal for other reaming applications. Handle length115mm.
CODE TYPE PRICE060-750 Miniature Diamond Bead Reamer........................ £10.99
DIAMOND REAMER & COUNTERSINK SET a set of 3 miniaturediamond file reamers. Useful for gently opening out holes in vari-ous materials including plastics, metals etc. The set contains aneedle point length overall 4", a round file length overall 5" andcone usedfor counter-sinking 3".
CODE TYPE PRICEFLDR18 3 P/c Diamond Reamer/Countersink Set.............. £5.99
MICRO DRILL REAMER a high quality micro reamer for cleaningor enlarging panel holes. It has 2 f lutes, size 1-5mm.Manufactured in England.
CODE TYPE PRICETR0005 Micro Drill Reamer 1mm - 5mm............................ £16.99
TAPERED REAMERS good quality hand operated tapered ream-ers for finishing and deburring panel holes, they may also be usedfor opening holes out tonon-preferred diameters.2 sizes available forhole sizes 3mm to 12mm(1/8" to 1/2"), and 6mm to 19m (1/4" to 3/4").
TAPERED REAMER 1 -16mm a good quality hand operatedtapered reamer used for finishing and deburring panel holes, open-ing holes out to non-preferred diameters. Fitted with a comfortableplastic handle. Hole sizes 1mm to 16mm. Length 135mm.
CODE TYPE PRICE060-069 Hand Reamer with Plastic Handle 1 - 16mm........ £9.99
"SUPER" TAPERED REAMER 0 - 14mm a high quality handoperated tapered reamer used for finishing and deburring panelholes, opening holes out to non-preferred diameters. It will easilystart pilot holes. Fitted with a comfortable handle. Hole sizes0mm to 14mm. Length 135mm.
CODE TYPE PRICE060-055 "Super" Reamer with Handle 0 - 14mm................ £19.99
PARALLEL HAND REAMERS a range of hand reamers inmetric and imperial sizes. Manufactured in England by DormerTools to ISO/BS328 and DIN206B standards. They are intendedto finish existing holes to H7 tolerance and are ideal for smallbatch production and repairs. They can be used on most ferrousand non-ferrous metals.
Cut OverallCODE TYPE Dia. Length Length PRICEHR2MM Hand Reamer 2mm 25mm 52mm..... £33.99HR3MM Hand Reamer 3mm 31mm 62mm..... £25.99HR4MM Hand Reamer 4mm 38mm 76mm..... £21.89HR5MM Hand Reamer 5mm 44mm 87mm..... £22.50HR6MM Hand Reamer 6mm 47mm 93mm..... £20.15HR7MM Hand Reamer 7mm 54mm 107mm... £21.79HR8MM Hand Reamer 8mm 58mm 115mm... £25.29HR9MM Hand Reamer 9mm 62mm 124mm... £30.60HR10MM Hand Reamer 10mm 66mm 133mm... £26.90HR12MM Hand Reamer 12mm 76mm 152mm... £26.99HR13MM Hand Reamer 13mm 76mm 152mm... £27.39HR14MM Hand Reamer 14mm 81mm 163mm... £30.99HR16MM Hand Reamer 16mm 87mm 175mm... £33.29HR19MM Hand Reamer 19mm 93mm 188mm... £48.29
Cut Overall CODE TYPE Dia. Length Length PRICEHR-1/8 Hand Reamer 1/8" 1-5/16" 2-5/8"...... £21.99HR3/16 Hand Reamer 3/16" 1-3/4" 3-7/16".... £24.99HR-1/4 Hand Reamer 1/4" 2" 3-15/16".. £24.99HR5/16 Hand Reamer 5/16" 2-1/4" 4-1/2"...... £25.95HR-3/8 Hand Reamer 3/8" 2-5/8" 5-1/4"...... £22.15HR-1/2 Hand Reamer 1/2" 3" 6"............ £25.05HR9/16 Hand Reamer 9/16" 3-3/16" 6-7/16".... £35.90HR-5/8 Hand Reamer 5/8" 3-7/16" 6-7/8"...... £31.39HR-3/4 Hand Reamer 3/4" 3-15/16" 7-15/16".. £48.29
BURNISHERS
OVAL BURNISHER STRAIGHT an oval shaped tool steel burnish-er with highly polished straight blade, set firmly in a wooden han-dle. Blade length 2".
CODE TYPE PRICE060-200 Oval Burnisher Straight Blade.............................. £4.99
OVAL BURNISHER CURVED an oval shaped tool steel burnisherwith highly polished curved blade, set firmly in a wooden handle.Blade length 2".
CODE TYPE PRICE060-202 Oval Burnisher Curved Blade............................... £4.99
GRAVERS
GRAVER SET a set of gravers suitable for carving and decorativework in a range ofmaterials. Suppliedas a set of 3 bladesand 2 handles.
CODE TYPE PRICE060-303 5 Piece Graver Set............................................... £9.99
WATCHMAKERS GRAVERS a range watchmakers gravers withsquare or lozenge section. Used for decorative work etc in arange of materials. Available in a range of sizes. Shaped hard-wood handles are available.
JEWELLERS DRAWPLATE a high quality steel drawplate usedfor reducing the diameter of round material or to make round mate-rial. The plate has 24 tapered holes ranging from 20 to 156 thou.The material is placed in the smallest hole that it will fit in, and isthen drawn through. The sharp edge of the hole removes somematerial, use the next hole size down to continue size reduction.Suitable for use with wood, plastic. Can be used with brass wire,annealing the wire will assist the process, bees wax or similar canbe used as a lubricant.
CODE TYPE PRICE060-380 Jewellers Drawplate............................................. £7.99
ABRASIVE BLOCKS
GARRYFLEX ABRASIVE BLOCKS a gentle abrasive hand toolwhich has applications wherever metal is being worked. The blockis made of a special resilient rubber filled with a hard abrasive gritwhich is evenly distributed through the block so that a constant fin-ish is imparted throughout the life of the tool. It is equally effectiveon curved or flat surfaces. Various effects can be obtained usinglubricants such as water, paraffin or solvent. 1,000's of usesinclude cleaning and polishing metals, rust and tarnish removal,cleaning electrical contactsetc, also ideal as a trackrubber for model railways.Dims:- 80 x 50 x 20mm.
CODE TYPE PRICEAB0010 Garryflex Block Fine 240 Grit............................... £4.75AB0020 Garryflex Block Medium 120 Grit.......................... £4.75AB0030 Garryflex Block Coarse 60 Grit............................. £4.75AB0040 Garryflex Block Extra Coarse 36 Grit................... £4.75
POLIFIX BLOCK a specially formulated ultra-fine non-metallic pol-ishing compound carried in an elastic bonding material whichcleans, degreases and polishes in one simple procedure. To usesimply polish back and forth in straight lines and wipe with a clean cloth to remove traces of the abrasive. Dims:- 30 x 40 x 20mm.
CODE TYPE PRICEAB0050 Polifix Block.......................................................... £4.50
PECO RAIL CLEANER an abrasive rubber block for burnishingthe surface of model railway track. Dimensions 50 x 25 x 11mm.
CODE TYPE PRICEPL41 Peco Track Rubber............................................... £2.99
SCRATCH BRUSHES
Glass fibre scratch brushes for rapid and accurate cleaning of allmetal objects, they can be used to prepare delicate surfaces forthe application of paint, adhesives and prior to soldering. Otheruses include:- erasing pencil marks from wood, non-absorbent inksfrom drawings, removing paint and lacquer and many other clean-ing applications.
2mm SCRATCH BRUSH slim clutch pencil type for small areas.
WIDE PATTERN SCRATCH BRUSH a clutch type scratch brushsuitable for cleaning larger areas. The glass is 8mm diameter.Refills are available. Length overall 105mm
CODE TYPE PRICE060-240 8mm Scratch Brush.............................................. £15.99060-241 8mm Scratch Brush Refill for 060-240.................. £8.99
STRING BOUND GLASS SCRATCH BRUSH string boundscratch brushes suitable for cleaning larger areas. Available in10mm and 17mm diameters.
BRASS SCRATCH BRUSH dense filled brass cleaning brush witha sliding ring which when moved up or down gives varying degreesof stiffness, making it ideal for cleaning, removing tarnish and pol-ishing different materials.Length 75mm, width 23mm,thickness 5mm max.
CODE TYPE PRICEAB0170 Brass Scratch Brush with Slide Ring.................... £1.99
CLEANING BRUSHES
BRASS WIRE BRUSH miniature brass cleaning brushes with a 1"dense filled head on a 6" wooden stock. Ideal for many cleaningapplications. Available with a medium or hard brass wire fill.
BRASS CLEANING BRUSH a high quality dense filled brass wirebrush set on a 9" wooden handle. The medium brass fill is set in 4rows, wire length 3/4". Length overall 225mm. Made in Germany.
CODE TYPE PRICEAB0190 Brass Cleaning Brush........................................... £6.99
SQUIRES MODEL & CRAFT TOOLS
TEL. 01243 842424 - FAX. 01243 84252592
3 PIECE MINIATURE CLEANING BRUSH SET 3 miniature clean-ing brushes which are almost the same size as a tooth brush. Theshaped plastic handle holds a dense fill in 3 rows. The fill of thebrushes are black nylon- soft, brass - mediumand steel - hard. Idealfor many cleaningapplications in theworkshop. Brush headdims 35mm x 10mm,bristle length 13mm.Length overall 170mm.
CODE TYPE PRICEAB0191 3 Piece Miniature Cleaning Brush Set.................. £1.99
CLEANING BRUSHES 3 cleaning brushes which are ideal for usein the workshop, garage and DIY applications. The shaped plastichandle holds a dense fill in 3 rows. The fill of the brushes areblack nylon - soft, brass -medium and steel - hard.Ideal for numerouscleaning applications.Brush head dims 100mmx 20mm, bristle length18mm. Length overall230mm. Availableindividually or a set of 3.
FLEXI-GRIT a revolutionary sanding film on polyester. It is flexi-ble, tough and can be reused many times. When in use it will notcrack, peel, clog or break down when wet. Works effectively heldby hand or on a sanding block. Available in 2 assorted packs andpacks of 5 sheets of the same grit.
CODE TYPE PRICEAB4300 Flexi-Grit 5 Assorted Fine 190 x 125mm.............. £6.99KS4031 Flexi-Grit Garnet 320 Grit Fine 115 x 100mm...... £2.99
WATERPROOF ABRASIVE SHEETS a range of waterproofpapers which are usually used wet to prevent clogging when sand-ing painted surfaces. Ideal for general applications such as carbody work, smoothing fillers etc. Coarse grades for fast cutting,the finer grades for final finishing. Sheet size 280 x 230mm. Soldindividually.
CODE TYPE PRICEWDP80 Waterproof Paper Coarse 80 Grit x1 Sheet.......... £0.90WDP120 Waterproof Paper Medium 120 Grit x1 Sheet...... £0.69WDP240 Waterproof Paper Medium 240 Grit x1 Sheet..... £0.60WDP320 Waterproof Paper Fine 320 Grit x1 Sheet........... £0.60WDP400 Waterproof Paper Very Fine 400 Grit x1 Sheet.... £0.60061-600 Waterproof Paper Very Fine 600 Grit x1 Sheet.... £0.60061-800 Waterproof Paper Very Fine 800 Grit x1 Sheet.... £0.60061-100 Waterproof Paper Very Fine 1000 Grit x1 Sheet.. £0.60061-120 Waterproof Paper Very Fine 1200 Grit x1 Sheet.. £0.60
WET AND DRY SHEETS a range of high quality self-lubricatingsilicon carbide sheets with waterproof latex backing. Ideal for useon metal, wet or dry. Very fine grades are ideal for rubbing downbetween painting. Sheet size 230 x 280mm, supplied in packs of10 sheets.
WE AIM TO EXHIBIT AS WIDE ARANGE AS POSSIBLE AT SHOWS,
BUT DUE TO SPACE RESTRICTIONSWE ARE NOT ABLE TO FEATURE
EVERY PRODUCT. IF YOUCONTACT US A FEW DAYS PRIOR
TO AN EVENT WE WILL TRY TOENSURE A PRODUCTS
AVAILABILITY AT THAT SHOW
EMERY PAPER
EMERY PAPER a range of top quality swiss made emery paperfor polishing metal. A choice of grits is available to suit a range ofapplications. Coarse grades for fast cutting, the finer grades forfinal finishing. Sheet size 280 x 230mm. Sold individually. **Notenew grading system**.New Grade Old Grades4/0 2000grit - 8/0, 6/0, 4/02/0 1200grit - 3/0, 2/01F 500grit - 0, 1F1 240grit - 1, 1C1G 180grit - 1G2 150grit - 2
CODE TYPE PRICE060-902 Emery Paper 4/0 - 2000 Grit................................. £0.89060-906 Emery Paper 2/0 - 1200 Grit................................. £0.89060-908 Emery Paper 1F - 500 Grit.................................. £0.89060-912 Emery Paper 1 - 240 Grit................................... £0.89060-916 Emery Paper 1G - 180 Grit................................... £0.89060-918 Emery Paper 2 - 150 Grit................................... £0.89
EMERY STICKS
EMERY STICKS good quality emery paper glued to flat woodenhandles, available in 6 grades. Length overall 9". Supplied indi-vidually or a pack of 6 sticks - may be any mix of 6.
BLUE EMERY CLOTH a range of emery cloth for working and pol-ishing metal. A choice of grits is available to suit a range of appli-cations. Top quality Swiss made. Coarse grades for fast cutting,the finer grades for final finishing. Sheet size 280 x 230mm. Soldindividually.
CODE TYPE PRICE061-062 Emery Cloth Sheet x 1 FF - 150 Grit................... £1.45061-060 Emery Cloth Sheet x 1 F - 120 Grit................... £1.45061-056 Emery Cloth Sheet x 1 1½ - 80 Grit................... £1.50061-054 Emery Cloth Sheet x 1 2 - 60 Grit................... £1.50061-052 Emery Cloth Sheet x 1 2½ - 50 Grit................... £1.55061-050 Emery Cloth Sheet x 1 3 - 40 Grit................... £1.60
EMERY CLOTH SHEETS a range of economically priced cloth-backed emery sheets for general purpose metal sanding, lightclean-up work and rust removal. Sheet size 230 x 280mm, sup-plied in packs of 10 sheets.
CODE TYPE PRICE061-335 GP Emery Cloth Sheets 10 Pk 36 Grit................. £4.19061-016 GP Emery Cloth Sheets 10 Pk 60 Grit................. £4.19061-749 GP Emery Cloth Sheets 10 Pk 80 Grit................. £4.19061-759 GP Emery Cloth Sheets 10 Pk 120 Grit............... £4.19061-249 GP Emery Cloth Sheets 10 Pk 180 Grit............... £4.19
HELPING HANDS
HEAVY DUTY HELPING HANDS WITH GLASS MAGNIFIER avariation of the popular Helping Hands with an extra large glasslens. The 90mm glass lens gives clear undistorted magnificationof x2½. The magnifier is mounted to the cross bar using ball jointsallowing universal positioning of the lens. The crocodile clip"hands" are mounted on across bar which is mountedon a ball joint. The heightof the lens and the "hands"can be raised or loweredon the column. Ideal forsoldering, assembling,painting etc.**Special Offer**Was £5.99 Now £4.99*
CODE TYPE PRICE020-861 Heavy Duty Helping Hands + Glass Magnifier..... £4.99
HELPING HANDS WITH LEDs AND IRON STAND a useful aidfor soldering small items. A combination of a soldering iron standand a helping hands. The magnifier has 2 LEDs for illuminatingthe workpiece. The heavy base keeps it stable, the main lens is65mm dia with x3 magnification, the 17mm inset lens is x12 nagni-fication.
CODE TYPE PRICE020-077 Helping Hands with 2 LEDs and Iron Stand......... £8.99
SQUIRES MODEL & CRAFT TOOLS
TEL. 01243 842424 - FAX. 01243 84252594
IF THERE ARE OTHER PRODUCTS THATYOU WOULD LIKE US TO STOCK,