Enterprise Development & Vocational Skills Training COMPLETION REPORT December 2014
Enterprise Development & Vocational Skills Training
COMPLETION REPORT December 2014
Report Author : Kausar Shamim Edited by : Anwar Ul Haq Design by : Chaudhry M. Javaid For further Information contact: Institute of Rural Management Farm # C 7-A, Street # 2, Chak Shahzad, Islamabad, Pakistan. Tel: +92-51-261 6523, +92-51-261 6524 Fax: +92-51-261 6525 Email: [email protected] Web: www.irm.edu.pk
Contents
1. Acknowledgments 2. Abbreviation 3. Project Background
• Objective 4. Introductions of Implementing Partners
• German Embassy
• FIDA
• IRM 5. IRM’s Vocational Training Programme A. Phase One Report Enterprise Development Training EDT 6. Enterprise Development Training Program
• Background
• Opening Session
• Activities Proceeding
• Statistical Analysis
• Photo Gallery B. Phase Two Report Vocational Skills Training Program 7. Description of Training Activities under FIDA Vocational Skills Training
• Training Objective 8. Proceedings
• Norms
• Pre Test
• Training Methodology
• Business Management & Life Skills Training
• Business management Skills
• Life skills
• Training Material
• Monitoring and Evaluation Mechanism
• Post test
• Certificate Distribution and Participants Remarks
• Comments by the Participants
• Distribution of Tool Kits & Stipend
• Results & Outcomes 9. Training Event on Mobile Phone repairing and Installation 10. Training Event on Motor Cycle Mechanic 11. Training Event on Computer Hardware 12. Training Event on Excavator Operator 13. Annexure
COMPLETION REPORT
Executive summary
Institute of Rural Management (IRM) started as a one room HRD unit of the National Rural
Support Programme (NRSP) and has now transformed into one of the leading capacity
Development institutes in Pakistan for the last 2 decades. IRM has worked with marginalized
rural communities all across Pakistan for building their capacities and improving their quality
of life. Through its diverse range of training programmes, IRM has also strived to build a
strong team of development professionals, who organize that the communities at
grassroots level are the core of all development initiatives.
Under the project Community Physical Infrastructure- Livelihood Strengthening Program
(CPI-LSP) that is the joint venture of German Embassy, Foundation for Integrated
Development Action (FIDA) and IRM. IRM escorted Enterprise and Skills Employment
Training Program of this project. With a goal to encourage and enable the local communities
of Chitral and Dera Ismail Khan to start small business and to run there already existing
small business more felicitously.
To improve the social and economical condition of Chitral local community, Skills
Employment training was also an element of this project with the vital intention for the
betterment of livelihood of the community.
1 Institute of Rural Management
COMPLETION REPORT
Acknowledgments
This publication was envisaged within the activities of the project “Community Physical Infrastructure-
Livelihood Strengthening Program” funded by German Embassy.
We would like to take this opportunity to convey our sincere thanks to Ms. Mishael Ali Khan
(Acting Chief Operating Officer/ Manager Grants & Programs-FIDA), Mr. Kashif Umar Khattak
(Operation Manager) and her entire team for full support at field units. We also acknowledge the
contribution of Community Training Program-IRM and Mr. Tariq Khawaja (Principal-Vocational
&Technical Education Centers) and there intact team for fully facilitating for successful
implementation of the project.
Furthermore, we also thanks to Mr. Kazim Jan (Project Manager), Mr. Bilal (Monitoring and
Evaluation-Manager), Mr. Khalid (Audio-Video Manager), Mr. Ishafaq (Vtec-Azakhail Principal) and
Mr. George Chughtai (Senior Program Officer) and Ms. Kausar Shamim (Junior Project Officer) for
smoothly execution of the project.
Anwar Ul Haq Programme Manager Institute of Rural Management
2 Institute of Rural Management
COMPLETION REPORT
Abbreviations
FIDA Foundation for Integrated Development Action
CPI-LSP Community Physical Infrastructure- Livelihood Strengthening Program
IRM Institute of Rural Management
EDT Enterprise Development Training
NRSP National Rural Support Programme
Vtec Vocational, Technical and Educational Center
3 Institute of Rural Management
COMPLETION REPORT
1. Project Background
The Foundation for Integrated Development Action (FIDA) is implementing a project named Physical Infrastructure-Livelihood Strengthening Program (CPI-LSP) with the support of Federal Foreign Office (FFO), German Embassy. The beneficiaries of this project are based in the districts of Dera Ismail Khan and Chitral. Overall 10 union councils (9 UCs of D.I. Khan and 1UC of Chitral) are benefiting from this project. The main components of (CPI-LSP) are: 16 small community physical infrastructure schemes; alternative energy through construction of 200 biogas plants and 6 solar pumps; livelihood development through vocational skill trainings for 100 men and women, establishing 3 centers for reviving local embroidery and craftwork for women home-based workers, trainings for master skill trainers and honey bee hives to 75 women to start their own enterprise. The project builds the capacity of 575 households through natural resource management activities and skill trainings.
Under this project, IRM collaborated with FIDA to undertake trainings on Enterprise Development Training (EDT) and courses on four vocational trades. For the purpose of trainings and courses, IRM conducted screening of the participants. After the screening, IRM conducted three (03) events – of five days each on EDT from October 14 – 31, 2014 in Chitral and DI Khan. The trainings were imparted to 75 participants from both of the districts. In next phase, after completion of EDT training program, IRM conducted four courses consisting of one month on different vocational trades from November 14, 2014 to December 13, 2014. The courses were organized at the IRM’s Vocational, Technical and Educational Center in Rawalpindi. A total of 50 participants from the Chitral region attended these courses. Objectives
• Involvement of local community in development process at village level
• Improvement and rehabilitation of small Infrastructure schemes
• Provision of alternative energy sources for local community
• Socio economic empowerment through vocational-skills training programs for men and women
• Enhancement (already existing) business of local community
Introduction of the Implementation partners
1. Federal Foreign Office (FFO) German Embassy
In 1970, the foundation stone for both the Chancery and the Ambassador's Residence was laid by former Ambassador Norbert Berger. The buildings were inaugurated in 1972. The Embassy is located within the "Diplomatic Enclave" - close to buildings of the Pakistani government.
Development cooperation between Pakistan and Germany: Development cooperation between Pakistan and Germany goes back to 1961, with the funding volume to date total some 2.5 billion Euros. Pakistan was thus one of Germany's first partner countries. The regional focus of this cooperation has traditionally been the north-western part of the country. Germany
4 Institute of Rural Management
COMPLETION REPORT
is one of the few donors to have its own implementing structures. It is active in Khyber-Pakhtunkhwa Province (KP) and is one of only a few of Pakistan's partners to be implementing measures in the Federally Administered Tribal Areas (FATA) along the border with Afghanistan. Individual measures are also carried out in Gilgit-Baltistan, Azad Jammu Kashmir and the Punjab.
Projects funded by the Federal Foreign Office: Whereas most of the cooperation programmes are funded by the Federal Ministry for Economic Cooperation and Development (BMZ) and implemented by German organizations such as GIZ or KfW, there are various individual projects implemented by Pakistani organizations which are funded directly by the Federal Foreign Office.
Germany supports community-based stabilization and multisectoral livelihood programme: On 3 May 2013, Ambassador Dr. Cyrill Nunn signed an agreement with Foundation for Integrated Development Action (FIDA) over 555,000 Euro (approx. 70 million PKR).
The project aim is to develop community physical infrastructure, the capacity of local
communities through trainings and providing livelihood packages to diversify their incomes to
improve the standards of living and alleviate the poverty.
2. Introduction of FIDA
The Foundation for Integrated Development Action (FIDA) was founded in 2004 by Faiysal Ali Khan and his grandfather, the late Brigadier Sadiq Nawaz Khan Awan in response to the years of government neglect and resulting human suffering in Dera Ismail Khan and its surrounding areas in the Khyber Pakhtunkhwa province. The district was chosen as a starting point for the founders to give something back to their ancestral homeland, but also because of its multi-ethnic, multi-linguistic composition and its location as a crossroads neighbored by Punjab, Balochistan and the Federally Administered Tribal Areas (FATA). These factors made the area a challenging, yet deserving, place to begin development work. FIDA has now expanded its work across Khyber Pukhtunkhwa and South Waziristan Agency in FATA and works with a wide variety of donors, partners and communities.
FIDA began work over 10 years ago in Dera Ismail Khan and Tank in Khyber Pukhtunkhwa (KP). Since then, FIDA's geographic reach has expanded to South Waziristan in the Federally Administered Tribal Areas of Pakistan and other districts of KP, including Lakki, Bannu, Karak, Kohat and Chitral. Taking a long-term approach to development and social change in this region, FIDA aims to act as a bridge between traditional and modern systems of governance and society. While operating conceptually on an 80 to 120 year timeline, FIDA works towards its long-term objectives in measurable 5-year blocks.
Cooperations and Facilitation: One of the key elements in FIDA's approach to development is cooperation. An integral part of this cooperation includes partnerships with donor agencies and other NGOs. It is FIDA’s belief that sharing of resources, knowledge and expertise will lead to a more efficient and sustainable system of development. FIDA has therefore positioned itself as an entry point for organizations wishing to do work in the districts of operations. This is a significant role in areas where a major challenge of development lies in establishing relationships, trust and credibility. FIDA has already established these critical elements and can
5 Institute of Rural Management
COMPLETION REPORT
provide the resources and access needed to implement development projects. In an attempt to reach as many people as possible, FIDA works with a wide variety of communities and groups throughout the region. FIDA also works to create links and partnerships with neighboring districts, in order to strengthen and replicate the work that is being done.
Long term vision: A cornerstone of FIDA’s existence has been a long term approach to development. Therefore, the first five years of operation were viewed as a “research and development” period, allowing time in the field to understand the traditional mechanisms, structures and cultures of the areas, as well as the development needs of the communities. Building meaningful relationships and maintaining integrity of process are imperative when working in areas that are often hostile to NGOs, suspicious of outsiders and vulnerable to security issues. This strategy enabled FIDA to respond quickly and effectively to the displacement caused by military operations in South Waziristan in 2009, acting as the sole implementing partner for the Provincial Government, UNHCR and others and assisting over 270,000 individuals. FIDA continued this emergency relief and rehabilitation work with the displaced communities and did so again after the unprecedented floods that occurred in 2010 and 2011.
Holistic Approach: FIDA believes in a multi-sector, community-driven approach to development. Rather than dealing with single issues in isolation, FIDA formulates comprehensive strategies that help communities address with their concerns holistically. FIDA also works to build and strengthen the capacity of Community Organizations (COs) and Village Organizations (VOs), thereby creating social transformation this is meaningful and sustainable.
Vision: A society built around good governance and democratic ideals, supported by a sound
economy and a sustainable use of resources.
Mission: To mobilize and build the capacity of existing political and social structures and to act
as a link between civil society and marginalized communities, thereby empowering all
stakeholders to achieve their identified development goals in a sustainable and replicable
manner.
3. The Institute of Rural Management (IRM)
IRM, earlier known as NRSP-IRM, is the largest capacity development and learning facility in the not-for-profit sector in Pakistan, conducting up to 600 different types of training with a turnout of around 50,000 trainees annually. Over the last 20 years, IRM has been directly responsible for building the capacity of development professionals and communities across Pakistan, as well as working with most UN agencies, World Bank, ADB, USAID, DFID, Norwegian and Federal and provincial government. Mainly, providing development assistance within following sectors:
• Capacity Development • Poverty Alleviation • Education
6 Institute of Rural Management
COMPLETION REPORT
• Health • Environment and Natural Resource Management 2010 was a breakthrough year for IRM both as organization, as it became an independent Legal entity registered under Section 42 of the Companies Ordinance 1984, and financially as the project activities expanded with increasing number of donor contributions besides Government of Sindh like UN-agencies, DFID, NORAD and USAID etc.
Geographical Coverage: IRM has coverage across all the five provinces and Azad Jammu and Kashmir. Through its partner Rural Support Programmes i.e. NRSP, AJKRSP, SRSO, BRSP, TRDP etc, IRM works in over 100 districts across the country.
Capacity Statement: As of June 2011, Institute of Rural Management has trained more than one million individuals in different fields such as Vocational and Technical skills, Professional and Management skills, Internship programme, life skills, small enterprise development and management, diploma and certificate courses. IRM is an ISO 9002-2008 certified entity. IRM has complete capacity in total “Training Cycle Management” with highly organized internal controls and systems in place which include financial procedures, staff service rules, gender policy, as well as administrative processes. A well-defined organization structure is in place with total transparency in financial & procurement procedures, with zero tolerance towards misappropriation and gender related issues.
Approach: IRM adapts a diagnostic approach for assessing the capacity building needs and the functional maturity of the clients. The need and maturity assessment in turn provides the basis for need- based guidance and for subsequent human and institutional development and other technical support.
Public private Connections: IRM focuses on Building the capacities of development professionals not within the Rural Support Programmes but across the South Asia region including representatives from Afghanistan, Bangladesh, Bhutan, Burma, India, Iran, Nepal, Maldives, Philippines, Sri Lanka, Tajikistan, And staff from Multilateral and bilateral agencies, national and international NGOs, elected members of the local bodies, civil society, corporate sector, government staff, through its series of long and short term training programmes, field oriented research studies, symposiums, national and international workshops and exposure visits.
International Recognition: IRM has or is implementing projects under bilateral agreements and direct agreements with ILO, World Bank, UNDP, Asian Development Bank, Swiss Development Corporation, IFAD, DFID, ESCAP, UNOPS and UNICEF etc, Due to its efforts and services in the field of empowering people through HRD, the institute has been declared as the “Centre of Excellence” in 2001 by the UN Economic and Social Commission for Asia the Pacific.
Some of the major training programmes in IRM are;
• Vocational Training Programme • Community Training Programme • Social Mobilization Training Programme
7 Institute of Rural Management
COMPLETION REPORT
• Institutional Capacity Building Services • Management Development Programme • Social Sector services Training Programme (Health and Education)
Professional Services and Support: Setting standard for excellence and discovering new horizons has led N-IRM to expand its scale of intervention by entering into the fields of Academics. We are continually developing varied partnership to expand our outreach and remodel our image at national level and abroad. Certainly, we have signed MOUs with two international (ITC/ILO, Italy & Asian University for Women, Bangladesh) and four well reputed universities in Pakistan. Moreover, we have also signed partnership agreement with all the public sector technical bodies, i.e. NIH, SDC, all TEVTAs, NARC and many others. IRM Digital Library: It serves as a repository of knowledge, both contemporary and historical. One significant point of focus is the archives of the RSPs field experience and Akhter Hameed Khan.
Innovation Centre for Education (ICE): ICE was established in 2005 to design and deliver training to primary school teachers. The objective is to make them effective facilitators in the classroom. The Ice also develops supplementary teaching guides and teaching material to inspire and empower teachers to become better educators.
Financial Management Capability: IRM has successfully maintained accounts according to international accounting standard. IRM also comply with the requirements of different donors as mentioned above. M/S Taseer Hadi Khalid & Co and Sadat Haider & Co are the auditors of IRM. IRM maintains separate ledger accounts and bank accounts for all the projects.
IRM’s Vocational Training Programme
IRM’s Vocational Training Programme (VTP) is aimed at enhancing the skills of the members of underprivileged communities that include women, disenfranchised youth and people with disabilities to empower them economically. The VTP follows the internationally acclaimed TREE (Training for Rural Economic Empowerment) methodology of the ILO and is widely acknowledged for providing post-training and Business Development Services (BDS) to the trainees.
The VTP offers training in more than 100 market driven technical and vocational courses that are recognized and certified for their quality by the City and Guilds, UK, Federal authority of Skills Development Council, Punjab and Sindh TEVTAs and the Trade Testing Boards of Sindh and KPK.
Objectives The VTP is specially designed to empower underprivileged marginalized youth of rural areas:
• To obtain employment opportunities • To provide knowledge and practice of the required attributes and challenges for setting
and operating a successful enterprise, particularly a small business
8 Institute of Rural Management
COMPLETION REPORT
• To prepare beneficiaries to work productively in small and medium-sized enterprises and more generally for an environment in which formal, full- time wage employment may be scarce or unavailable.
The VTP is one of the largest and most successful programmes of IRM and has been operational for the last ten years. More than 150,000 trainees have graduated in different employable skills from the VTP. The programme has always aimed at achieving social inclusion and the improvement of the quality of life of youths, as well as the achievement of a better labor insertion of young people through vocational training.
Women Trained Under IRM-VTP in Last 10 Years
Men Trained Under IRM-VTP in Last 10 Years
9 Institute of Rural Management
COMPLETION REPORT
Phase One Report
Enterprise Development Training EDT
10 Institute of Rural Management
COMPLETION REPORT
Enterprise Development Training Program
Background
IRM conducted EDT training program at Chitral and D.I.Khan. 25 participants from Chitral-Mastuj and 50 participants from D.I Khan attended the EDT program. These participants were either running their existing small business (shops) or planning to open shops for business purposes. Beneficiaries of this training were, both, men and women. Two resource persons from IRM – Mr. Kazim Jan and Mr. Bilal Ahmad conducted these EDT at both locations.
Opening Session: The training started with the recitation of verses of Holy Quran by on of the participants of the training. After formal inaugural of the training, In Chitral, Mr Mehmood, the team leader from FIDA in Chitral and, in D.I.Khan , Mr Khalid & Mr Sadaqat set the tone of the workshops right at the upfront by reiterating the objectives and practicality of the training. They explained that this program will aid in developing capacity of the local enterprenuers. They welcomed all the participants and IRM team. Mr Kazim Jan of IRM thanked FIDA orgainzation and welcomed all the participants on behalf of IRM.
Mr Mehmood welcomes the participants Mr Kazim Jan welcomes participants
Activities Proceeding
Day 1:
1) Inroduction: In inductory session, all the participants introduced themselves. Both of the trainers also introduced themselves to the participants.
2) Fears and expectation: The particpants were asked to write their fears and expectation about the ttraining. Red and green card were provided to them to write fears on red and expectations on green.
3) Registration & attendance: All the participants were asked to fill the IRM registration form. Attendance of all the participants were entered in the atteandance sheet.
4) Pre Test: A test were given to the participants to jugde their present understanding about the EDT. At the end of the training, same test was used to guage the efficiency of the training.
11 Institute of Rural Management
COMPLETION REPORT
5) Introduction to small buisness and the hurdles faced by enterprenuers: In this session, the resource persons educated the participants about the defination of enterprenuership, various types of buisness and kinds of business with respect to its size and its kinds. They also explained the hurdles being faced by the entreprenuers in Pakistan.
6) Human resource management and its importance: The partipants were faciltated to understand the importance of human resoruce management, which has an important role in the success and the faliure in any buisness.
A participant present her group work Group work under process
7) Formation of groups and group works:
Theory does not help in understanding the topics untill it is not combined with practical. Therefore, participants were divided into four groups and given different questions regarding entrprise devolopment. After completion of the task, each group was asked to present findings of the group work. The groups’ presentations followed by a question-ansewer session to further explain the concepts and their implications.
Day 2:
1) Review of previous day: The second day started with revision of the first day topics and activities. All the participants were made to contrbute to the task through asking questions about the first day topics/activities.
2) Coflict & conflict resolution: This session focused on understanding the meaning of the conflict, the reason of the confilict and how to resolve the conflict.
3) Comunication and its skills; The session started with chinese whisper, an old method of explainng the importance of communication. The hindrances in communication were also explained. Different methods and kind of communiocations were explained to the partcipants. Different skill for effective communication were also discussed.
4) Important pionts in goods Production: In this session, the production of goods in factory were discussed.
5) Group works:
12 Institute of Rural Management
COMPLETION REPORT
The partipants were divided in different groups and given different tasks about the topics of the day. They prepared it in groups and then presented it to rest of the participants.
Day 3: 1) Review:
The Third day started with the revision of second-day topics. The participants were asked questions about second-day topics durign the recaping. Each of the participants took part in this session.
2) Value addition and its comparation: In this session the participants were made to understand how they can add qualities to thier products and make them unique or different from other contemporaries.
Trainer explains the contents to the participants
3) Introduction of Servies, Marketing and its objectives: The resource persons explained the meanings of ‘services’ in detail. In this session, the participants were made to know the meaning of marketing. The were educated on making their products more attrative for customers and their presentation to people or clients.
4) Market survey: Participants were sent to a nearest local market to gather information about market practices on: supply of products; demand of clients; product designing; customer handling and financial management etc. A prescriber form was used to gather these information. After compilation of the data, the participants shared their findings.
Day 4:
1) Review: The day started with the revision of day three. Participants were divided into two groups. Each group asked ask question from the other group about the topics and activities of the previsous day.
2) Planing and strategy according to customers requirments: In this session, the pivotal role of the customer were discussed. Different question were asked from the partipants on how they will plan their buisness according to the needs of the customers.
13 Institute of Rural Management
COMPLETION REPORT
In the end, strategies for a successful business were explained to the particpants. 3) Introductio to basic accounting:
The meanings of accounting were discussed in detail. The paticapnts were made to understand why accounting is so important.
4) Strategy for devolopment of enterprise: 5) Group works:
Day 5: Review:
All the previous day topics were discussed in detail by participants. Cross questioning were done by all the trainees. In this way all the prvious day topics were covered.
1) Planing for devolopment of enterprise: 2) Group work on formats:
The different formats were given to participants and the task was explained to them. Then they were asked to fill them according to thie buisness. They filled the daily cash book, the other expenceses daily format etc. Every participant explained the format and presented it.
3) Fears during training: 4) Evaluation:
At the end of the training, the participants expressed their views about trainers, training materials, training venue in black & white.
5) Post Test: A post test was conducted at the end to evalute the effectiveness of the training. The results showed that most of the participants have gained improvement in their existing knowledge of enterprenuership.
6) Concluding remarks: The project closing ceremony was held at the end. The resource persons thanked the participants and the FIDA team. On behalf of FIDA Mr. Mehmood (team leader) thanked the resource persons and appreaciated our efforts. On behalf of participants Mr. Samiullah and Ms Shamsia thanked FIDA and IRM for conducting such a fruitful training. In Dera Ismail Khan, Mr Pir Mushtaq thanked IRM team for coducting the training.
14 Institute of Rural Management
COMPLETION REPORT
Statistical Analysis
Pre and Post Test marks presented graphically for analysis
Participants Pre and Post Test Marks
Participants Pre and Post Test Marks
0
5
10
15
20
25
Meh
roon
Bib
iBi
bi N
isa
Bibi
Shi
faZa
inab
Meh
boob
aH
amid
a Kh
anA
ziza
Ash
raf
Hor
iaPa
rdum
Wal
i Kha
nM
ahin
aSh
amzi
Sha
hid
Muh
amm
ad F
aiz
Shah
Kha
lidN
avee
d A
lam
Khus
h N
isa
Sham
sia
Sam
iulla
hA
kbar
Azi
zU
mar
Kha
nKh
ush
Wal
i Kha
nSh
er H
ayat
Zaro
yar
Kha
nA
amir
Kha
n …
Bul B
ulan
Jan
Fero
z Wal
i Kha
n
Mastuj Paxs Result
Pre-Test
Post Test
15 Institute of Rural Management
COMPLETION REPORT
Participants Pre and Post Test Marks
16 Institute of Rural Management
COMPLETION REPORT
Photo Gallery: EDT Events
17 Institute of Rural Management
COMPLETION REPORT
Phase Two Report
Vocational Skills Training Program
18 Institute of Rural Management
COMPLETION REPORT
Description of Training Activities under FIDA Vocational Skills Training
As part of the FIDA, a total of 50 participants from Mastuj-Chitral successfully completed skills training at the IRM’s VTEC Rawalpindi in 4 vocational and technical trades:
Computer Hardware Excavator operator Mobile repairing Motorcycle repairing
The trainings were held in collaboration with the Federal Foreign Office (FFO) German Embassy
and FIDA under the CPI-LSP with the aim to divert the attention of deprived youth of Chitral for making them economically more productive. During the training courses, the participants were provided with an excellent opportunity to gain practical hands-on experience.
Training Objective
The main objective of the training programme was to enable the participants to acquire the necessary skills to secure gainful employment.
Summary of the Vocational Skills Training Sr# Trade Mastuj Total Start Date End Date
1 Excavator Operator 16 16 14th Nov, 14 13th Dec, 14
2 Computer Hardware 14 14 14th Nov, 14 13th Dec, 14
3 Motor Cycle 11 11 14th Nov, 14 13th Dec, 14
4 Mobile Phone Repairing 9 9 14th Nov, 14 13th Dec, 14
Grand Total 50 50
Proceedings The first day of the training began with the recitation of verses from Holy Quran. Training Coordinator from IRM welcomed the participants and shared the training objectives. In the introductory session, the training coordinator conducted the following activities:
Registration of each participant A general briefing was given on the training course and its overall contents Tackling the Fears and Matching Expectations with Objectives IRM coordinator explained the main objectives and concepts of the training Ground Rules were discussed
Norms
Some norms for the training were set in order to conduct all the training events in the most effective way. Following rules were set:
Punctuality should be observed There should be no cross talking There should be no mini meetings
19 Institute of Rural Management
COMPLETION REPORT
Each other’s views should be respected Mobile phones should be kept silent
Pre Test
In the introductory session, a pre-test questionnaire was administered to evaluate participants’ existing knowledge base and skill level related to the training course.
Training Methodology
The training was designed according to the ILO Tree Methodology and as per the need of the participants keeping a ratio of 20 % theoretical and 80 % practical. The training sessions were highly interactive and discussions were encouraged in order to enhance participants’ understanding of the course content. Interactive lectures, individual and group assignments, hands-on practice, group discussions, and individual and group presentations helped in making the training more effective.
The total duration of the training was based on the time tested idea of credit hours that has been in practice by VTECs for the last ten years. A total of 5 hours sessions were given daily.
Different training techniques were applied during training events, taking into consideration various adult learning principles.
Business Management & Life Skills Training
An essential part of the 30 day training package was two day Business Management Skills Training and Life Skills Training. The objective was to enhance participants’ understanding of business management and life skills to enable them to engage in entrepreneurship. The main contents of these training are as follows:
Business management Skills
How to start a small business How to manage a Business Business / enterprise successes and failures
Lessons learned from the first year of business implementation
Stages of small business
What’s Important at initial stage? Will your business make money? Marketing and product development
Financial and technical appraisal of each project
Life skills What are life skills Importance of Life skills education Essential Life skills Time Management Self Awareness Problem Solving skills
Decision making skills Positive Attitude Aim of life Effective communication skills Confidence building Conflict Management
Training Material
Training Material was carefully designed to correspond to the specific objectives of the session and the general objectives of the overall training. Training materials was finalized for each
20 Institute of Rural Management
COMPLETION REPORT
session well before time in consultation with the respective resource persons. Handouts, flipcharts, flash cards, markers, pens and any other training materials including consumables and non consumables required by the resource persons was made available for the activity by IRM.
Monitoring and Evaluation Mechanism
In order to make the trainings effective and outcome based, participants were asked to evaluate training facilities, the comprehensiveness of course contents and resource person’s style of delivery. The training coordinator also evaluated the participants to judge their level of understanding after each session.
Post test
At the completion of the training the Coordinator administered post-test questionnaire to measure participants’ learning. The result of post test shows improvements in learning level of the participants when compared with the pre test.
Certificate Distribution and Participants Remarks
At the completion of all training events the Certificate distribution ceremony was held at Vtec-Rawalpindi. Ms. Mishael Ali Khan (Acting Chief Operating Officer/ Manager Grants & Programs), Mr. Khashif Umar Khattak (Operation Manager) from FIDA were guests in closing ceremony. Mr. Tariq Khawaja (Vtec-Principal IRM), Mr. Shafiq (Management Information System) and Ms. Kausar Shamim (Vtec-Reforms) also participated in the ceremony. The participants also shared their experience of the whole 30 days in their respective training events.
Comments by the Participants
The participants highly appreciated the efforts of the whole VTEC Team, Principal VTEC, and the attitude of the trainers, the training quality and methodology. The participants thanked FIDA for providing this opportunity to Mastuj youth. They said that training like this would be helpful for them to work productively in small and medium-sized enterprises and more generally for an environment in which formal, full- time wage employment may be scarce or unavailable.
21 Institute of Rural Management
COMPLETION REPORT
The resource person transferred the knowledge in a very effective manner, which made learning easier for them.
Distribution of Tool Kits & Stipend
At the completion of the training Tool Kits were distributed among all students and Stipend of Rupees 1700 was also given.
Computer Hardware
22 Institute of Rural Management
COMPLETION REPORT
Mobile Phone Repairing & Installation Motor Cycle Mechanic
Results & Outcomes
Towards the end of all comprehensive training events, the participants capacities were build with the new social-economic conditions to support self-employment and entrepreneurship.
23 Institute of Rural Management
COMPLETION REPORT
Training wise Brief Report
24 Institute of Rural Management
COMPLETION REPORT
Training Event on Mobile Phone repairing and Installation
Introduction
A 30 days training was designed by Institute of Rural Management. A day to day lesson plan was prepared to ensure the quality of the training. At IRM- VTEC Rawalpindi, a well equipped training was arranged to provide participants favorable learning atmosphere. This was a 30 days residential training where all the boarding lodging arrangements were provided by IRM.
Training Name Training Course on Mobile Phone Repairing and Installation
Training Duration 30 days
Training Venue IRM VTEC was selected for training conduction.
No. of Participants Total 9 Men participants were enrolled and successfully completed the training
Objective
The objective of this course was to enable the trainees to gain a good knowledge and skill of repairing Mobile phones and its installation
Trainer/facilitator
Mr. Imran being as a well qualified and experienced trainer designated to deliver quality training for the achievement of training objectives.
Training Contents
Here are the details of Mobile Phone Repairing and installation
Safety precautions Use proper tools for work Types of Mobiles Types of Connection Programming code of AMPS Mobile Scanning codes Language codes Dead seat Set off after 10 seconds Mic problem Speaker problem Red light on No display Black LC Set off at service Auto on
Hanging Key switch problem Auto Dialling Charging Faults Direct charging Weeks signals Programming wash Set heat up during call No dialling No service No network Mobile codes Introduction to AVO Meter Capacitor,Resistor and Transistor
25 Institute of Rural Management
COMPLETION REPORT
Ericsson 318/68 Block Diagram Circuits and its detail Components and its faults Dialling, signal and CPU section Nokia 6110/5110 Block diagram Circuits and its detail Component and its fault Dialling signal & CPU section Power distribution BoardtoBoard connector Related codes Nokia 3310/3330 Nokia 7110 Nokia 3210 Nokia 6210 Nokia 8810 Nokia 8310 Nokia 5510 Nokia 7650 Nokia 6610 Nokia 3300 Nokia 3650 Nokia 3510
Nokia 7210 Nokia 5510 Nokia 6510 Nokia 3410 Nokia 3610 Nokia 6110 Nokia 6100 Samsung T 100 A 400 A 300 A 100 R 220 R 220 R 220 Motorola V 70 V 66 V 50 V 3688 T191 Erickson T 28 T 68
Training Methodology
Different training techniques were used during the training taking into consideration various adult learning principles. Below are some of the major training techniques that were utilized:
Theoretical Sessions- interactive lectures Hand on practices Small Group Activity Pre & post test Practical work Assignments
Training Outcomes
After completion of training course, participants were able to perform following skills;
Complete understanding about Mobile phone its types and parts Proper use of Tools and Equipments as per safety precautions Identification of faults in different mobile phones &Troubleshooting Business Management skills Life skills
26 Institute of Rural Management
COMPLETION REPORT
Training Event on Motor Cycle Mechanic
Introduction
A 30 days training was designed by Institute of Rural Management. A day to day lesson plan was prepared to ensure the quality of the training. At IRM- VTEC Rawalpindi, a well equipped training was arranged to provide participants favorable learning atmosphere. This was a 30 days residential training where all the boarding lodging arrangements were provided by IRM.
Training Name Training Course on Motor Cycle Mechanic
Training Duration 30 days
Training Venue IRM VTEC was selected for training conduction.
No. of Participants Total 11 Men participants Participated in the event
Objective
The objective of this course was to enable the trainees to gain a good knowledge and skill Motor cycle repairing
Trainer/facilitator
Mr. Haider Ali being as a well qualified and experienced trainer designated to deliver quality training for the achievement of training objectives.
Training Contents
Here are the details of Motor Cycle Mechanic
Safety Precautions Tools & Equipment safety Auto shop safety Introduction & use of tools in auto shop. Introduction & use of SST special services tools in used auto shop. Exercise of Measuring tools vernier, micrometer, wire gauge, outside calliper, inside calliper & scales etc. Engine Construction and working principle of engine Different types of engine .spark ignition engine (2 Stroke & 4Stroke) Purpose of all parts of engines
Important parts components of engine
Transmission System General introduction & layout of transmission System Different type of clutch plates Adjustment of clutch plates Working principle of pressure plates Working principle of Gearbox Assembling & disassembling of gear Brake System Mechanical & Hydraulic Brakes introduction Construction & operation of mechanical brakes Problems faced in brake system
27 Institute of Rural Management
COMPLETION REPORT
Construction & working of service hydraulic brake system & air brake system & air brake system. Brake shoes liners installation. Suspension & Steering System Types of shock absorbers, repairing of shock absorbers Assembling and disassembling complete suspension system Construction of steering mechanism, problem of steering mechanism Construction of frame and chases Lubrication & Cooling system Types of lubrication Construction of oil pump &
installation of oil pump and oil filter Instruction to cooling system, Installation of radiator Fuel system Introduction of fuel system Assembling and disassembling of carburettor Construction of fuel filter, Carburettor circuit tracing. Working of carburettor Tuning How to engine tuning Introduction of tuning Identification of faults & troubleshooting
Training Methodology
Different training techniques were used during the training taking into consideration various adult learning principles. Below are some of the major training techniques that were utilized:
Theoretical Sessions- interactive lectures Hand on practices Small Group Activity Pre & post test Practical work Assignments
Training Outcomes
After completion of training course, participants were able to perform following skills;
Proper use of Tools and Equipments as per safety standards Assembling & dissembling of different motor cycle parts Tuning of motor cycle engine Identification of faults in Motor Cycles &Troubleshooting Business Management skills Life skills
28 Institute of Rural Management
COMPLETION REPORT
Training Event on Computer Hardware
Introduction
A 30 days training was designed by Institute of Rural Management. A day to day lesson plan was prepared to ensure the quality of the training. At IRM- VTEC Rawalpindi, a well equipped training was arranged to provide participants favorable learning atmosphere. This was a 30 days residential training where all the boarding lodging arrangements were provided by IRM.
Training Name Training Course on Computer Hardware
Training Duration 30 days
Training Venue IRM VTEC was selected for training conduction.
No. of Participants Total 14 Men participants Participated in the event
Objective
The objective of this course was to enable the trainees to gain a good knowledge and skill Computer Hardware
Trainer/facilitator
Mr. Khurram being as a well qualified and experienced trainer designated to deliver quality training for the achievement of training objectives.
Training Contents
Here are the details of Computer Hardware
Personal Computer Components Personal Computer Components System Unit Components Storage Devices Personal Computer Connection
Methods Operating System Fundamentals Personal Computer Operating
Systems Windows User Interface
Components Windows File System
Management
Windows System Management Tools
PC Technician Professional Best Practices
Tools of the Trade Electrical Safety Environmental Safety and
Materials Handling Perform Preventative
Maintenance Diagnostics and Troubleshooting Professionalism and
Communication
29 Institute of Rural Management
COMPLETION REPORT
Installing and Configuring Operating Systems
Install Microsoft Windows Upgrade Windows Add Devices to Windows Optimize Windows Maintaining and
Troubleshooting Microsoft Windows
Operating System Utilities Maintain Microsoft Windows Troubleshoot Microsoft
Windows Recover Microsoft Windows Installing and Configuring
Peripheral Components Install and Configure Display
Devices Install and Configure Input
Devices Install and Configure Adapter
Cards Install and Configure Multimedia
Devices Installing and Configuring
System Components Install and Configure Storage
Devices Install and Configure Power
Supplies Install and Configure Memory Install and Configure CPUs Install and Configure System
Boards Maintaining and
Troubleshooting Peripheral Components Troubleshoot Display Devices Maintain and Troubleshoot
Input Devices Troubleshoot Adapter Cards Troubleshoot Multimedia
Devices
Troubleshooting System Components
Troubleshoot Storage Devices Troubleshoot Power Supplies Troubleshoot Memory Troubleshoot CPUs Troubleshoot System Boards Supporting Printers and
Scanners Printer and Scanner
Technologies Printer and Scanner
Components Printer and Scanner Processes Install and Configure Printers
and Scanners Maintain and Troubleshoot
Printers and Scanners Network Technologies Network Concepts Network Communications Network Connectivity Internet Technologies Installing and Managing
Network Connections Create Network Connections Install and Configure Web
Browsers Maintain and Troubleshoot
Network Connections Supporting Laptops and Portable
Computing Devices Laptop and Portable Computing
Device Components Install and Configure Laptops
and Portable Computing Devices Maintain and Troubleshoot
Laptops and Portable Computing Devices Personal Computer Security
Concepts Security Fundamentals
30 Institute of Rural Management
COMPLETION REPORT
Security Protection Measures Data and Physical Security Wireless Security Social Engineering Supporting Personal Computer
Security
Install and Configure Security Measures
Maintain and Troubleshoot Security Measures
Training Methodology
Different training techniques were used during the training taking into consideration various adult learning principles. Below are some of the major training techniques that were utilized:
Theoretical Sessions- interactive lectures Hand on practices Small Group Activity Pre & post test Practical work Assignments
Training Outcomes
After completion of training course, participants were able to perform following skills;
Proper use of Tools and Equipments as per safety standards
Use of MS Office Software installation Proper use of computer and typing identifying faults on the hardware trouble shooting Business Management skills Life skills
31 Institute of Rural Management
COMPLETION REPORT
Training Event on Excavator Operator
Introduction
A 30 days training was designed by Institute of Rural Management. A day to day lesson plan was prepared to ensure the quality of the training. At IRM- VTEC Rawalpindi, a well equipped training was arranged to provide participants favorable learning atmosphere. This was a 30 days residential training where all the boarding lodging arrangements were provided by IRM.
Training Name Training Course on Excavator Operator
Training Duration 30 days
Training Venue IRM VTEC was selected for training conduction.
No. of Participants Total 16 Men participants Participated in the event
Objective
The objective of this course was to enable the trainees to gain a good knowledge and skill in operating Excavator
Trainer/facilitator
Mr. Malik Dilawar being as a well qualified and experienced trainer designated to deliver quality training for the achievement of training objectives.
Training Contents
Here are the details of Computer Hardware
Safety Measures Carrier Positioning. Position excavator Tracks by driving in forward direction. Carrier Positioning Reverse Position Excavator tracks by driving in reverse
direction. Trench Loading. Scoop dirt into bucket and dump
contents into articulated truck. Truck Dumping. Single Pass Digging. Fill bucket by digging just once.
Trenching. Use bucket to excavate small trench. Trench & Load. Controls Familiarization. Learn and understand hydraulic
excavator operator controls. Bucket Placement. Position excavator Bucket in space. Raking the Green. Position excavator Bucket to follow trajectory in straight
line.
32 Institute of Rural Management
COMPLETION REPORT
Position excavator bucket to follow trajectory in arc. Training Methodology
Different training techniques were used during the training taking into consideration various adult learning principles. Below are some of the major training techniques that were utilized:
Theoretical Sessions- interactive lectures Hand on practices Small Group Activity Pre & post test Practical work Assignments
Training Outcomes
After completion of training course, participants were able to perform following skills;
Proper use of Tools and Equipments as per safety standards Maneuver of heavy machinery Use and moving of bucket Use of Trench and Trench Loading. trouble shooting Business Management skills Life skills
33 Institute of Rural Management
COMPLETION REPORT
Annexure
34 Institute of Rural Management
COMPLETION REPORT
Participants Name Lists and Enterprise Development Schedule
a. EDT Mastuj Participant List b. EDT D.I. Khan 1st Batch
S# Participants Name
S# Participants Name 1 Mehroon Bibi
1 Fazal Rehman
2 Bibi Nisa
2 Mohammad tariq 3 Bibi Shifa
3 Mohammad Suleman
4 Zainab
4 Mohammad Saleem 5 Mehbooba
5 Ghulam Qasim
6 Hamida Khan
6 Abdullah Jan 7 Aziza Ashraf
7 Mohammad Ismail
8 Horia
8 Imran Khan 9 Pardum Wali Khan
9 Rehamt Ullah
10 Mahina
10 Haq Nawaz 11 Shamzi Shahid
11 Mohammad Asif
12 Muhammad Faiz
12 Kifayat Ullah 13 Shah Khalid
13 Sher Zaman
14 Naveed Alam
14 Hidayat Ullah 15 Khush Nisa
15 Shafqat Hussain
16 Shamsia
16 Abdur Rahman 17 Samiullah
17 Sana ullah
18 Akbar Aziz
18 Sayed Rahman 19 Umar Khan
19 Kaleem Ullah
20 Khush Wali Khan
20 Asmat Ullah 21 Sher Hayat
21 Mohammad Ramzan
22 Zaro yar Khan
22 Waqas Rahman 23 Aamir Khan Parwana
23 Ayaz Gul
24 Bul Bulan Jan
24 Mohammad Shabran 25 Feroz Wali Khan
25 Inayat Ullah
35 Institute of Rural Management
COMPLETION REPORT
c. EDT D.I. Khan 2st Batch
S# Participants Name 1 Shaeen Bibi 2 Zainab Elahi Bux 3 Dilshahad 4 Mir Jaha Bibi 5 Hasina Ramzan 6 Farhana Baloch 7 Parveen Bibi 8 Gula Anar Bibi 9 Tajo Bibi
10 Faizan Bibi 11 Kulsoom 12 Fouzia Gul 13 Khurshid Bibi 14 Mumtaz Bibi 15 Zainab Bibi 16 Bashira Bibi 17 Shahzad Bibi 18 Asia Bibi 19 Dilshad Bibi 20 Tasleem Bibi 21 Anum 22 Yasmeen Nawaz 23 Najma Bibi 24 Hasina Bibi 25 Saira Malik
36 Institute of Rural Management
COMPLETION REPORT
37 Institute of Rural Management
COMPLETION REPORT
38 Institute of Rural Management
COMPLETION REPORT
Vocational Skills Training Participants Name List
a. Computer Hardware
Sr.# Name Father Name 1 Abdur Rehman Haji Murad 2 Abdul Aziz Mir Aziz 3 Rehmat Wali Taj Iqbal Wali Taj 4 Ala u Ddin Taj ud Din 5 Kashif Faraz Mir Faraz 6 Hayat Ali Khan Noor Hayat Khan 7 Tanveer Nawaz Mas Ghori 8 Didar Wali Shah Shah Goli Shah 9 Shafiq Ahmad Mir Wali Khan
10 Sabir Hussain Ghulam Hussain 11 Syed Faisal Saleh Syed Salah u Ddin 12 Ghulam Essa Qadir Khan 13 Salim Jaffar Abdul Salam 14 Syed Ihsan Ali Shah M. Ali Shah
b. Mobile Phone Repairing & Installation
Sr.# Name Father Name 1 Rahim Ullah Shokor Khan
2 Taimoor Khan Sheerin Khan
3 Zahid Ahmad Shah BulBul Aman Shah
4 Waqar Ali Khan Zafar Ali Khan
5 Naveed Alam Sardar Ali Khan
6 Rafiq Kamal Kamal Ud Din
7 Rahim Ullah Muhammad Wazir Khan
8 Abdul Hamid Abdul Karim Khan
9 Ikhlas Ud Din Dost M uhammad
c. Motor Cycle Mechanic
Sr.# Name Father Name 1 Shuaib ur Rehman Haji Muhammad 2 Najum Asghar Sher Murad 3 Shah Mansoor Ghulam Hasil 4 Zahir Ullah Abdul Ghafar Khan 5 Shafiq ur Rahman Aziz Rehmat 6 Zulfiqar Ali Khan Khosh Wali Khan 7 Amir Hussain Phurdum Wali 8 Imtyaz Ali Hassan Ali Khan 9 Rafiq Ullah Mubarak Shah 10 Asmar u Din Muhammad Siyas Khan 11 Sardar Hussain Gul Murad
39 Institute of Rural Management
COMPLETION REPORT
d. Heavy Machinery
SR# Name Father Name
1 Nasab Hussain Noor Ahmad Shah 2 Shahid Ali Khan Pakhtoon 3 Ajmal Qubad Mohammad Zar Qoobad 4 Khair Mohammad Zar Mast Khan 5 Afsar u Din Taj u Din 6 Asad Ullah Khan Farman Ullah 7 Asad Ali Shah Pahilwan Shah 8 Misbah u Din Noor Bahar Shah 9 Irfan ullah Khan Faramooz Khan 10 Tanveer Ahmad Mohammad Nabi 11 Rehmat Zafar Gul Baz 12 Farzan Khan Mirza Khan 13 Sahib Nizar Mohammad Nazar Khan 14 Ilyas Ahmad Mohammad Ayaz 15 Muhammad Zahid Ullah Muhammad Hafeez Khan 16 Sharif Ur Rehman Haji Muhammad
40 Institute of Rural Management
COMPLETION REPORT
Evaluation Forms of EDT
A. Mastuj Participants
41 Institute of Rural Management
COMPLETION REPORT
42 Institute of Rural Management
COMPLETION REPORT
B. D.I.Khan 1st Batch Participants
43 Institute of Rural Management
COMPLETION REPORT
C. D.I.Khan 2nd Batch Participants
44 Institute of Rural Management
COMPLETION REPORT
45 Institute of Rural Management
COMPLETION REPORT
Evaluation Forms of Vocational Skills Training
a. Mobile Repairing Training
46 Institute of Rural Management
COMPLETION REPORT
47 Institute of Rural Management
COMPLETION REPORT
b. Motor Cycle Mechanic
48 Institute of Rural Management
COMPLETION REPORT
49 Institute of Rural Management
COMPLETION REPORT
c. Hardware Training
50 Institute of Rural Management
COMPLETION REPORT
51 Institute of Rural Management
COMPLETION REPORT
d. Heavy Machinery Training
52 Institute of Rural Management
COMPLETION REPORT
53 Institute of Rural Management