Fiber Optics

9/125 um 1,310 nm < 0.35

Optical Performance - Single mode Fibers

Fiber Size Operational Wavelength Attenuation dB/Km Bandwidth Mhz x km

50/125 um 850 nm < 3.0 > 1,5001,300 nm < 1.0 > 500

Optical Performance Max-Band Fibers


50/125um 850 nm < 2.7 > 5001,300 nm < 0.8 > 800

62.5/125 um 850 nm < 3.2 > 2001,300 nm < 1.0 > 600

50/125um 850 nm < 2.7 > 5001,300 nm < 0.8 > 500

62.5/125 um 850 nm < 3.2 > 1601,300 nm < 1.0 > 500

62.5/125 um 850 nm < 3.2 > 200

Optical Performance - Multi mode Fibers


50/125 um 850 nm < 2.7 > 4001,300 nm < 0.8 > 800

62.5/125 um 850 nm < 3.2 > 200

Optical Performance Hi-Band Fibers


This specification covers fibers generally used in the cable supplied/distributed by NEXTERA

NETWORK SERVICES

101WEB: WWW.NEXTERA.COM.PKFAX: (051) 2855227 EMAIL: [email protected]

Choosing NEXTERA as your cable supplier simply puts you one step ahead....

Simplex and Duplex Zipcord Cable

NEXTERA is the largest stockist/distributor of all types of optical fiber cables in Pakistan and dedicated to supply and market a broad range of indoor/outdoor fiber optic cables to meet any of your application for voice, video and data transmission. Such applications include transmission of light signals for Telecom Backbones, Access Networks/MANs, LAN, and point to point links in cities, buildings, factories, campuses and FTTH, FTTD. Our wide variety of optical fiber cables offer the flexibility, direct connectability and design versatility necessary to satisfy the diverse requirement existing in high performance fiber optic application up to light distances.

Optical Fiber250um Acrylate Fiber Coating900um Diameter Tight-BufferAramid Strength MemberOuter JacketDuplex ZipcordSimplex

Simplex and Duplex Cables are best suitable for indoor use, such as routing connections in patching systems. Available in one and two fiber designs, these cables are optimized for ease of connectorization and use as patchcords and pigtails. Un-cabled fiber, coated only with a thermoplastic buffer, is also available for pigtail application inside equipment.

PART # DESCRIPTION MANUFACTURER/SUPPLIERNC-TBSM02-D 9/125 Duplex (Singlemode) Zipcord NEXTERAOC-TBSM02-D 9/125 Duplex (Singlemode) Zipcord Optical Cable Corp., USANC-TBMM02-D50 50/125 Duplex (Multimode) Zipcord NEXTERAOC-TBMM02-D50 50/125 Duplex (Multimode) Zipcord Optical Cable Corp., USAFor 62.5um fiber and Simplex style cables requirement, please contact our customer service department.

> Leading supplier of fibre optic cables

> Combined qualities/know-how from datacom/telecom markets

> Customized solutions

> Long-term field experience and technical competence in fibre optics

> Flexible and reliable service

> Wide product program

> Stock availability of key products

> Competitive pricing

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

1010101110101011110101010111010101011010101011101010111101010101110101010110

OPTICAL FIBERCABLES

101 FOR FURTHER INFORMATION AND SPECIFICATIONS PLEASE CONTACT US: PHONE: (051) 2855224-5

NETWORK SERVICES

Tactical cables are extremely strong, lightweight, rugged and survivable. These tight-buffer cables designed for tactical field use and in natural disastrous situations (flood and earthquakes etc) to establish new communication links or emergency restorations. Suitable for an outdoor applications, tactical cables can be deployed on the ground in all terrain, including severe environments. These cables can also be used in deployment/retrieval applications such as video coverage of news events or oil exploration.

PART # DESCRIPTION APPLICATION MANUFACTURER/SUPPLIER NC-09SM04-TC 4 Fiber, Tactical Cable, SM 9/125 (Outdoor/Field Use) NEXTERANC-50MM04-TC 4 Fiber, Tactical Cable, SM 50/125 (Outdoor/Field Use) NEXTERA

Tactical Cables

Distribution Cables are multi fiber cables utilizing 900 um tight-buffered fibers surrounded by aramid yarn strength members and a flame-retardant outer jacket. The connectors may be installed directly on the 900um buffered fiber at the Optical Fiber Distribution and termination points. The distribution style cables are suitable for both indoor and outdoor use and can be used in trunking, LAN and distribution applications where small size, lightweight, and versatile installation capability are required. Armored distribution cables are also available for additional protection in direct burial and aerial installations. NEXTERA will connetorize directly onto 900um fiber, if required.

PART # DESCRIPTION APPLICATION MANUFACTURER/SUPPLIER NC-50MM06-DS 6 Fiber, Distribution, MM 50/125, Indoor/Outdoor(Duct) NEXTERAOC-50MM06-DS 6 Fiber, Distribution, MM 50/125, Indoor/Outdoor(Duct) Optical Cable Corp., USANC-50MM12-DS 12 Fiber, Distribution, MM 50/125, Indoor/Outdoor(Duct) NEXTERAOC-50MM12-DS 12 Fiber, Distribution, MM 50/125, Indoor/Outdoor(Duct) Optical Cable Corp., USAOC-50MM06-DSA 6 Fiber, Distribution, MM 50/125, Armored Outdoor (Direct burial/aerial) Optical Cable Corp., USAOC-50MM12-DSA 12 Fiber, Distribution, MM 50/125, Armored Outdoor (Direct burial/aerial) Optical Cable Corp., USANote: 9/125SM, 50/125MM, hybrid cables and higher fiber counts cable are available upon request. Please contact for further details.

Distribution Cables

Figure-8 Messenger Cable

Figure-eight Messenger cables are best suitable for new installations. The figure-eight messenger cable reduces installation time and cost by approximately 50% compared to separate installation of a messenger wire and the lashing of the cable to the messenger. Wide operating temperature range of -55C to +85 C.

PART # DESCRIPTION APPLICATION MANUFACTURER/SUPPLIER OC- 9SM06-F8M 6 Fiber, Figure Eight, SM 9/125, Outdoor(Aerial) Optical Cable Corp., USAOC-50MM06-F8M 6 Fiber, Figure Eight, MM 50/125, Outdoor(Aerial) Optical Cable Corp., USA

Note: 9/125SM, 50/125MM, hybrid cables and higher fiber counts cable are available upon request. Please contact for further details.

Central Filler

Optical FiberAcrylate Fiber Coating

Color-Coded 900um DiameterTight Buffer

Aramid Strength Member

Steel Tape Armor, 6 mil Corrugated Copolymer CoatedPolythylene Outer Jacket

A Overall Cable Diameter

B Outside Diameter of Jacketed Inner Cable

A B

Messenger Strength Member


Strength Member/Fiber

Optical Fiber

Acrylate Fiber Coating

Color-Coded 900um DiameterHard Elastometric Tight-Buffer

Polylefin Outer JacketRipcord

Optical Fiber

Acrylate Fiber Coating

Color-Coded 900um DiameterHard Elastomeric Tight-Buffer


Core-LockedTM Polyurethane Jacket

Flame retardant available

OPTICAL FIBERCABLES

NETWORK SERVICES


Unitube cables are, compact, lightweight, small in diameter and installation friendly, while offering the crush resistance and tensile strength similar to traditional loose tube cables. In unitube cable, the fibers, are positioned in a central loose tube, filled with water-resistant filling compound. This tube is covered by water-blocking material with a layer of strength members to provide the cable with the required tensile strength. The cable sheath is made by polyethylene (PE). These cables are best suitable to establish LAN backbones, CATV Networks or to be laid in tunnels or in duct applications. Armored unitube cables are also available for direct burial applications.

PART # DESCRIPTION APPLICATION MANUFACTURER/SUPPLIER DD-9SM06-UNI 6 Fiber, Unitube, SM 9/125, Indoor/Outdoor(Duct) Draka, DenmarkNC-9SM06-UNI 6 Fiber, Unitube, SM 9/125, Indoor/Outdoor(Duct) NEXTERADD-9SM12-UNI 12 Fiber, Unitube, SM 9/125, Indoor/Outdoor(Duct) Draka, DenmarkNC-9SM12-UNI 12 Fiber, Unitube, SM 9/125, Indoor/Outdoor(Duct) NEXTERADD-50MM06-UNI 6 Fiber, Unitube, MM 50/125, Indoor/Outdoor(Duct) Draka, DenmarkNC-50MM06-UNI 6 Fiber, Unitube, MM 50/125, Indoor/Outdoor(Duct) NEXTERADD-50MM12-UNI 12 Fiber, Unitube, MM 50/125, Indoor/Outdoor(Duct) Draka, DenmarkNC-50MM12-UNI 12 Fiber, Unitube, MM 50/125, Indoor/Outdoor(Duct) NEXTERADD-9SM06-UNIA 6 Fiber, Unitube, SM 9/125, Armored Indoor/Outdoor(Direct Burial) Draka, DenmarkNC-9SM06-UNIA 6 Fiber, Unitube, SM 9/125, Armored Indoor/Outdoor(Direct Burial) NEXTERADD-9SM12-UNIA 12 Fiber, Unitube, SM 9/125, Armored Indoor/Outdoor(Direct Burial) Draka, DenmarkNC-9SM12-UNIA 12 Fiber, Unitube, SM 9/125, Armored Indoor/Outdoor(Direct Burial) NEXTERADD-50MM06-UNIA 6 Fiber, Unitube, MM 50/125, Armored Indoor/Outdoor(Direct Burial) Draka, DenmarkNC-50MM06-UNIA 6 Fiber, Unitube, MM 50/125, Armored Indoor/Outdoor(Direct Burial) NEXTERADD-50MM12-UNIA 12 Fiber, Unitube, MM 50/125, Armored Indoor/Outdoor(Direct Burial) Draka, DenmarkNC-50MM12-UNIA 12 Fiber, Unitube, MM 50/125, Armored Indoor/Outdoor(Direct Burial) NEXTERA

Unitube Cable

Tube filling compoundUNI Loose tube

Steel wire

Water-blocking materialFiber

PE sheath

Corrugated steel tape

Note: Please contact, for higher fiber and hybrid optical fiber cabe requirements.

Loose Tube Cable

Loose tube cable is designed to endure outside temperatures, high moisture conditions. The fibers are loosely packaged in gel filled buffer tubes to repel side elements. The main application for these cables are for direct burial under difficult laying conditions. The single or double layer of steel tape armoring provides protection against rodents and other elements, while directly buried in ground. These cables are best suitable for outdoor applications to establish Telecom and CATV Trunk in direct burial applications. Please contact for additional fiber counts.

PART # DESCRIPTION APPLICATION MANUFACTURER/SUPPLIER NC-9SM06-LTA 6 Fiber, Loose Tube, SM 9/125, Armored Outdoor(Direct Burial) NEXTERANC-9SM12-LTA 12 Fiber, Loose Tube, SM 9/125, Armored Outdoor(Direct Burial) NEXTERANC-9SM24-LTA 24 Fiber, Loose Tube, SM 9/125, Armored Outdoor(Direct Burial) NEXTERANC-50MM06-LTA 6 Fiber, Loose Tube, MM 50125, Armored Outdoor(Direct Burial) NEXTERANC-50MM12-LTA 12 Fiber, Loose Tube, MM 50125, Armored Outdoor(Direct Burial) NEXTERANote: Please contact, for other manufacturers cables, higher fiber counts and duct type loose tube cables,

Corrugated Steel TapeInner SheathOuter Sheath

FRP or Steel wire central strength memberFiller

Optical Fiber Jelly FillingLoose Tube

Aramid Yarns

Cable Filling

OPTICAL FIBERCABLES


NETWORK SERVICES

NEXTERA offers a wide varity of singlemode and multimode optical fiber cable assemblies in a wide variety of configurations including patchcords, pigtails and in simplex and duplex styles, in several standard lengths, and special lengths to order. State of the art equipment and increased productivity allows NEXTERA to continue offering the best value in the industry! All NEXTERA patchcords are tested utilizing the industry's latest equipment and offer superior quality at low prices on all styles of patchcords. 100% Guaranteed! Patchcords are available with SC, MT-RJ, LC, ST, FC, DIN and E2000 or combinations of connectors. For Pigtail requirement please contact NEXTERA.

Interconnect your Optical Network with the highest quality Optical Fiber cable assemblies from NEXTERA

Part # DescriptionSC to SC DuplexNC-SCPCM-D1 SC-SC Multimode duplex 1mNC-SCPCM-D3 SC-SC Multimode duplex 3mNC-SCPCM-D5 SC-SC Multimode duplex 5mNC-SCPCM-D10 SC-SC Multimode duplex 10mMT-RJ to MT-RJ DuplexNC-MTRJ-D1 MTRJ-MTRJ Multimode 1mNC-MTRJ-D3 MTRJ-MTRJ Multimode 3mNC-MTRJ-D5 MTRJ-MTRJ Multimode 5mNC-MTRJ-D10 MTRJ-MTRJ Multimode 10mLC to LC DuplexNC-LCM-D1 LC-LC Multimode Duplex 1mNC-LCM-D3 LC-LC Multimode Duplex 3mNC-LCM-D5 LC-LC Multimode Duplex 5mNC-LCM-D10 LC-LC Multiemode Duplex 10mE-2000 to E-2000 DuplexDS-E2000M-D1 E2000-E-2000 Multimode Duplex 1mDS-E2000M-D3 E2000-E2000 Multimode Duplex 3mDS-E2000M-D5 E2000-E2000 Multimode Duplex 5mDS-E2000M-D10 E2000-E2000 Mulitmode Duplex 10mSC to MTRJ DuplexNC-SCMT-D1 SC-MTRJ Multimode 1mNC-SCMT-D3 SC-MTRJ Multimode 3mNC-SCMT-D5 SC-MTRJ Multimode 5mNC-SCMT-D10 SC-MTRJ Multimode 10mSC to ST DuplexNC-SCST-D1 SC-ST Multimode duplex 1mNC-SCST-D3 SC-ST Multimode duplex 3mNC-SCST-D5 SC-ST Multimode duplex 5mNC-SCST-D10 SC-ST Multimode duplex 10mMT-RJ to ST DuplexNC-MTST-D1 MTRJ-ST Multimode 1mNC-MTST-D3 MTRJ-ST Multimode 3mNC-MTST-D5 MTRJ-ST Multimode 5mNC-MTST-D10 MTRJ-ST Multimode 10m

Multimode Patchcords

MT-RJ to ST Duplex

MT-RJ to SC Duplex

MT-RJ to MT-RJ

ST to ST Simplex SC to E2000 Duplex SC to ST Duplex

OPTICAL FIBERPATCHCORDS ---- MULTIMODE

NETWORK SERVICES


Part # DescriptionSinglemode Patchcords

SC to SC DuplexNC-SCPCS-D1 SC-SC Singlemode duplex 1mNC-SCPCS-D3 SC-SC Singlemode duplex 3mNC-SCPCS-D5 SC-SC Singlemode duplex 5mNC-SCPCS-D10 SC-SC Singlemode duplex 10mLC to LC DuplexNC-LCS-D1 LC-LC Singlemode Duplex 1mNC-LCS-D3 LC-LC Singlemode Duplex 3mNC-LCS-D5 LC-LC Singlemode Duplex 5mNC-LCS-D10 LC-LC Singlemode Duplex 10m E-2000 to E-2000 SimplexDS-E2000S-S1 E2000-E2000 Singlemode Simplex 1mDS-E2000S-S3 E2000-E2000 Singlemode Simplex 3mDS-E2000S-S5 E2000-E2000 Singlemode Simplex 5mDS-E2000S-S10 E2000-E2000 Singlemode Simplex 10mFC to FC SimplexNC-FCFC-S1 FC/PC-FC/PC Singlemode Simplex 1mNC-FCFC-S3 FC/PC-FC/PC Singlemode Simplex 3mNC-FCFC-S5 FC/PC-FC/PC Singlemode Simplex 5mNC-FCFC-S10 FC/PC-FC/PC Singlemode Simplex 10mFC/PC to DIN SimplexDS-FCDIN-S1 FC/PC-DIN Singlemode Simplex 1mDS-FCDIN-S3 FC/PC-DIN Singlemode Simplex 3mDS-FCDIN-S5 FC/PC-DIN Singlemode Simplex 5mDS-FCDIN-S10 FC/PC-DIN Singlemode Simplex 10mDIN to DIN SimplexDS-DIN-S1 DIN-DIN Singlemode Simplex 1mDS-DIN-S3 DIN-DIN Singlemode Simplex 3mDS-DIN-S5 DIN-DIN Singlemode Simplex 5mDS-DIN-S10 DIN-DIN Singlemode Simplex 10m

For other connector styles, APC Finish and pigtails

Please contact!

SC to LC Duplex

FC to FC Simplex

E2000 to E2000 Simplex

DIN to FC Simplex

DIN to DIN SimplexE2000 to E2000 DuplexSC to LC Duplex

OPTICAL FIBERPATCHCORDS ---- SINGLEMODE

F-3000Fiber optic connectors of the SFF (Small Form Factor! family, complying with IEC61 754-20 and TlA/EIA 604-10, LC ILucent) compatible with integrated security and handling characteristics. For singlemode and multimode applications, PC and APC polished.

Available as: Connector (simplex) Duplex Backplane

Applications:CATV LAN, Telecommunications, Test and Measurement, Sensors, Industria

F-3000

F-2000

Fiber optic connectors complying with CECC 86275, integrated high security and handling characteristics. For singlemode and multimode applications APC and PC polished.

Available as:Connector (simplex) K

Duplex CompactDuplex 1/2"Low Profile ^

BackplaneFusionCrimp & Cleave for

HCS fibers

Applications:Telecommunications, CATV, LAN MAN, WAN, Test and Measurement, Medical, Sensors, Industrial.

F-2000

F-2000-PS

Fiber optic connector complying with CECC 8627 5 with integrated expanded beam technology, allowing high power light transmission up to 2W. A section of graded index fiber is introduced as a collimating lens, which enlarges the beam diameter and reduces power density at the connector interface.

Available as:APC (4)Connector (simplex) Duplex Compact Backplane

Applications:Telecommunications Networks, high bit rates and long transmission distances. DWDM Systems, Amplifier technology

E-2000-PS

SCFiber optic connectors complying with the NTT-SC Standard and CECC 86265 for singlemode and multimode applications, APC and PC polished

Available as:Connector (simplex)DuplexDuplex by FCS

Applications:Telecommunications, CATV, LAN, MAN, WAN, Test and Measurement, Medical, Sensors, industrial

FC

Fiber optic connectors complying with the NTT-FC Standard. CECC 86115 and IEC 874-7 for singlemode and multimode applications, PC and APC polished.

Available as:Connector (simplex)Standard and JDS

version.

Applications:Telecommunications CATV, LAN, MAN, WAN, Test and Measurement, Medical, Sensors, Industrial

FC

DIN

Fiber optic connectors complying with CECC 86135, CECC 861 SO, IEC 874-6 and CECC 78005 for singlemode and muhimode applications, PC and APC polished-

Available as:Connector ISA (simplex)Integrated electrical/optical backplaneconnector (LSD)Connector (LSG)(Push-Pull)AVIO/AVIM (Avionics/Military)

Applications:Telecommunications, CATV, LAN, MAN, WAN, Test and Measurement, Medical, Sensors, Industrial

DIN

Fiber optics is a precise science, a technology that demands the most from each individual component. Since the birth of fiber optics, DIAMOND has been an important contributor of innovative ideas and solutions that have extended the bounds of this exciting field.

Successful Connections only

St

ST-compatible fiber optic connectors (BFOC/2,5) complying with CECC 86120 and IEC-874-10 for single-mode and multimode applications, PC polished.

Available as:Connector (simplex)

Applications:Telecommunications CATV LAN, MAN, WAN, Test and Measurement, Medical, Sensors, Industrial ST is a registred trademark of AT&T

FSMAFiber optic connectors complying with CECC 86104 and MIL-C-83522Type9Q5tor multimode applications, flat polished.

Available as:Connector (simplex with 03.175 mm ferrulel

Also available as:Connector (with 02.5 mmferrulel, for singlemode and multimode applications, PC flat polished

Applications: Telecommunications, LAN, Medical, Sensors, Industrial

PM

PM (polarization maintaining) fiber optic connectors. For usage with PM fiber (Panda, Bow-tie). APC and PC polished. Actively or passively aligned.

Available as:Connector E-2000(simplex)Connector DIN

(simplex)Connector FC/PC(simplex)Connector SC(simplex)

Applications:Test and Measurement, Medical, Sensors, Industria

DHI

Diamond Micro Interface is a setup of two 2,5 mm ferrules mated with the help of a special clip, aiming to maintain the smallest possible dimension. For singlemode and multimode applications APC and PC polished.

Available as:Ferrules (simplex)

Applications:Industrial, Test and Measurement

MT-PJ

Fiber optic connectors with mini MT-terrules, Complying with ANSI/TIA/EIA-604-12 ANSI/TIA/EIA-568-B.3. Plug and Pull Design with well known RJ-style latch. For singlemode and multimode applications, PC polished

Available as:Connector (duplex)

Applications:LAN (FTT-XI,10-100Mb Ethernetup to Gigabit solutions

MFS

Multi fiber connector system for SM and MM ribbon fiber,complies with pr EN 185310. APC and PC polished

Available as:ConnectorBackplane

Applications:Telecommunications CATV, LAN, MAN. WAN. Test and Measurement, Medical, Sensors. Industrial

ST FSMA PM MT-PJ MFS

In public and private telecommunications networks alike, DIAMOND connectors have proven them selves with years of reliable service. This is because rigorous quality controls have always formed the basis of our manufacturing process. But DIAMOND is more than just a connector manufacturer. We unterstand that excellent products must be backed by commensurate support. Our specialists are there to help with expert advice, training, installation assistance and termination services.

with DIAMOND SA


NETWORK SERVICES

NEXTERA provides a variety of Subscription Channel (SC) connectors and adapters. The SC is known for its locking mechanism that gives an audible click when pushed into the adapter. Available in simplex and duplex styles, SC connector features a push-pull design for quick patching of cables into rack or wall mounts and prevents rotational misalignment. The SC connector family includes the Physical Contact (PC) pre-dome polished ferrule end face that reduces back reflection over a ferrule with a flat end face. To further reduce the unwanted back reflection NEXTERA offers the Angled Physical Contact (APC) version that has a ferrule end face with an 8 angle. The NEXTERA SC connectors are available in both singlemode and multimode versions with zirconia ceramic ferrules, and is fully compatible with NTT-SC hardware. The precision molded body and boot are made from UL-rated material. NEXTERA also offers an epoxy-free SC connector for quick field termination.

Part # Description Style Typical Loss Manufacturer/SupplierNC-SCPC-SM/S SC/PC, Singlemode Simplex 0.10dB NEXTERANC-SCPC-MM/S SC/PC, Multimode Simplex 0.20dB NEXTERANC-SCAPC-SM/S SC/APC, Singlemode Simplex 0.10dB NEXTERANC-SCAPC-MM/S SC/APC, Multimode Simplex 0.20dB NEXTERA

Note: NEXTERA offers SC connector in once piece construction style with 3mm cable standard boot. Please contact us for other specifications requirement.

SC CONNECTORS

. Compliance with Telcordia. ANSI. IEC. TIA/EIA. NTT and JIS specifications

. Low insertion loss & back reflection

. One-piece construction & pull-proof design

. Free-floating ceramic ferrule

. Precision anti-rotation key and corrosion resistant body

. UL-rated plastic housing and boots in a variety of colors

. Telcordia style boots

. Mount style Adapters with plastic housing

FEATURES . CATV. Metro. Active device termination. Test equipment. Telecommunication networks. Local Area Networks (LANs). Data processing networks. Structured Cabling. Wide Area Networks (WANs). Industrial, medical & military

APPLICATIONS

ST CONNECTORS

. Bayonet style housing for easy termination

. Epoxy and epoxy-less versions

. High precision alignment

. Low insertion and return loss and back reflection

FEATURES . Local Area Networks (LANs). Data Processing Networks. Premise Installations. Instrumentation

APPLICATIONS

The NEXTERA ST style connector has a bayonet-style housing and a long spring-loaded ferrule hold the fiber. Available in singlemode and multimode, the ST style connector features reliable and durable field installation. The design of the NEXTERA ST connector enables installers to crimp the back of the body directly onto the cable jacket and Kevlar. This eliminates cable pull away, ensuring a strong termination. The ST is one of the older generations of connector, but is still widely used for multimode networks, including LANs for buildings and campuses.

Part # Description Style Typical Loss Manufacturer/SupplierNC-STPC-MM ST/PC, Multimode Simplex 0.15dB NEXTERANC-STPC-SM ST/PC, Singlemode Simplex 0.20dB NEXTERANote: NEXTERA offers ST connectors in once piece construction style with 3mm cable standard boot. Please contact us for other specifications requirement.

OPTICAL FIBERCONNECTORS

A next generation media converter with enhanced features

NXF-74210/100Base-TX to 100Base-FX Media Converter See Page # 111

NETWORK SERVICES


FC CONNECTORS

. Compliance with Telcordia, ANSI, IEC,TIA/EIA, NTT and JIS specifications*

. Low insertion loss & back reflection

. One-piece construction

. ceramic ferrule

. Precision anti-rotation key

. Telcordia style boots

. Corrosion resistant body (Nickel Plated Brass)

FEATURES . CATV . Metro Applications . Active device termination . Test equipment . Wide Area Networks (WANs) . Telecommunication networks . Data processing networks . Industrial and Military

APPLICATIONS

The FC/PC connector incorporates a Physical Contact (PC) pre-domed fiber end face that reduces back reflection over a flat end face ferrule. To further reduce unwanted back reflection NEXTERA offers the FC/APC connectors and adapters. The NEXTERA FC connector is available in both singlemode and multimode versions, and is fully inter-mateable with NTT-FC products. Both versions have zirconia ceramic ferrules with pre-radiused PC profile and convex spherical end, or the 8 angle in a step or conical end face for the APC version. All NEXTERA FC connectors can achieve low optical loss and back reflection while ensuring maximum repeatability.

Part # Description Style Typical Loss Manufacturer/SupplierNC-FCPC-SM SC/PC, Singlemode Simplex 0.20dB NEXTERANC-FCAPC-SM SC/APC, Singlemode Simplex 0.20dB NEXTERASI-FCPC-SM SC/PC, Singlemode Simplex 0.25dB Seiko, JapanSI-FCAPC-SM SC/APC, Singlemode Simplex 0.25dB Seiko, Japan

Note: NEXTERA offers FC connectors in once piece construction style with 3mm cable standard boot. Please contact us for other specifications requitement.

DIN CONNECTORS

. CATV & multimedia

. Metro applications, premise installations

. Active device termination

. Test equipment

. Telecommunication networks

. Local & Wide Area Networks (LANs. WANs)

. Data processing networks

. Industrial, medical & military

FEATURES . Compatible with DIN 47256. Spring- loaded free floating ferrule

piece construction. Free-floating ceramic ferrule design. Corrosion resistant body. Compact design. Low insertion loss & back reflection

APPLICATIONS

DIAMOND SA, pre-assembled DIN 47256 (LSA) connectors feature a single unit body with spring-loaded free floating zirconia ferrule. This unique connector offers superior performance in a compact, DIN 47256 compatible design suitable for a variety of applications. The DIN connectors are manufactured of precision screw machined brass for consistent performance and durability. Field Terminations are not recommended, Diamond SA will provide pre-terminated pigtails and patchcords.

Part # Description Style Typical Loss Manufacturer/SupplierNC-DINPC-SM DINPC, Singlemode Simplex 0.20dB NEXTERANC-DINAPC-SM DIN/APC, Singlemode Simplex 0.20dB NEXTERANote: For high performance results, Diamond SA does not recommend field terminations and will provide factory assembled pigtails and patchcords.


Maximise your Gigabit Ethernet LANby going full-duplex with fiber!

1000Base-T to 1000Base-SX/LX Converter

NXF-724See Page # 111


NETWORK SERVICES

MT-RJ CONNECTOR SERIES

The singlemode or multimode MT-RJ products available from NEXTERA are well suited for high density applications. The MTRJ connector provides increased port density two times that of a duplex SC. The single plastic ferrule houses two fibers utilizing a user-friendly RJ-45 connection system. The same size as a simplex SC connector, the MTRJ is designed for backbone and horizontal cabling systems, local area networks and telecommunication systems, as it is reliable and simple to terminate. The MT-RJ Adapter comes standard in black, with additional colors available upon request. An optional MT-RJ Adapter with SC style housing is also available for applications where SC footprint is required.

. Asynchronous Transmission Mode (ATM)

. Gigabit Ethernet

. CATV. Video and Multimedia

. Active Device/Transceiver Interface

. Premise Installations

. Telecommunication Networks

. Industrial

. Military

. Paral lel opt ical interconnect between PC Cards and patch panels

. Interconnection for 0/E modules

. O p t i c a l S w i t c h i n t e r f r a m e connections

APPLICATIONS . Precision molded MT ferrule. High precision guide pins for exact

alignment. Duplex ferrule. Plug-jack (RJ-45) design. TIA/EIA 568-A compliant*. Polishing does not require diamond

film

FEATURES

Part # Description Style Typical Loss Manufacturer/SupplierNC-MTRJF-MM Female, Multimode 0.20dB NEXTERA NC-MTRJF-SM Female, Singlemode 0.20dB NEXTERA NC-MTRJM-MM Male, Multimode 0.20dB NEXTERA NC-MTRJM-SM Male, Singlemode 0.20dB NEXTERA

LC Connector

. Compact, pull-proof design

. RJ-45 style interface

. Low insertion loss and low back reflection*

. Polarized and color coded (TIA 568-A&IS011801)

. UL-Rated plastic housing and boot

. Behind the Wall (BTW) style short connector & boot

. High precision alignment

FEATURES . Gigabit Ethernet. Video. Active Device Termination. Premise Installations. Telecommunication Networks. Multimedia. Industrial. Military

APPLICATIONS

The LC is a small form factor (SFF) connector and is ideal for high density applications, available in simplex or duplex versions. The LC connector has a zirconia ceramic ferrule measuring 1.25mm O.D. with either a PC or APC endface, and provides optimum insertion and return loss. The LC connector is used on small diameter mini-cordage (1.6mm/2.0mm) as well as 3.0mm cable. LC Connectors are available in pre-assembled or kit (unassembled) formats. The NEXTERA LC Adapters are available in simplex and duplex configurations and fit the standard RJ-45 panel cutout. They feature self-adjusting panel latches and a choice of mounting orientations with labeled polarity. A choice of zirconia ceramic or phosphor bronze split sleeve is available. The LC connector family is Telcordia, ANSI/EIA/TIA and IEC compliant.

Part # Description Style Typical Loss Manufacturer/SupplierNC-LCS-SM Singlemode with 3MM Cable Boots Simplex, 0.10dB NEXTERA NC-LCS-MM Multimode with 3MM Cable Boots Simplex, 0.20dB NEXTERANC-LCD-SM Singlemode with 3MM Cable Boots Duplex 0.10dB NEXTERA NC-LCD-MM Multimode with 3MM Cable Boots Duplex 0.20dB NEXTERA


Highly reliable 19" rack-mount 12 port card Basis media converters chassis for backbone

and mission critical applications

19" Rack-mounted 12-port Card-based Media Converter Chassis

NXF-719See Page # 111

Experience the Power of E-2000 Connector System!

0.1dB Random Safety Shutter Color Coding

Fiber optic connections in less than a minute

With the AMP NETCONNECT LightCrimp Plus connectors, you canmake fiber optic connections for premises cabling fiber-to-the-deskapplications in less than a minute.

LightCrimp Plus connectors use patented AMP splice and crimptechnology to make fiber optic termination a quick, clean andsimple mechanical process. Limited training is required, combinedwith a reduced number of tools and no consumables. WithLightCrimp Plus you can terminate fibers without the epoxies,ovens or ultraviolet curing processes used in conventionalterminations.

Rely on AMP to provide you the highest-quality fiber connections,no matter what your preference or requirement be it quick-cureadhesive style; no-epoxy polish (LightCrimp); or no-epoxy,no-polish (LightCrimp Plus).

AMP NETCONNECTLightCrimp PlusConnectors

Easiest and quickest fiber termination available

Terminations take under a minute

Limited training required No polishing needed:simply

strip the cable,cleave and crimp

Factory-polished to a consistent, high-quality end finish eliminates return loss concerns

No epoxy,curing ovens,or ultraviolet; no power needed

SC-and ST-Style connectors No set-up required,ideal for

low fiber count cables -no workstation required

Lowest applied labor costs Exceeds connector

performance requirements of TIA/EIA-568-B

Tool kit upgrades available

LightCrimp Plus ST-Style and SC/MT-RJ Jack Termination Kit 1278118-1

NETWORK SERVICES


Since AMP NETCONNECT LightCrimp Plus connectors are factory polished, all you have to do is strip the cable, cleave the fiber and crimp the connector. As well as saving time per connector, there is no set-up time required and you get a more consistent, high-quality end finish.

Pre-polished connectors

LightCrimp Plus connectors offer consistent crimp quality and long term high performance on a par with that of standard epoxy style connectors, regardless of temperature variations. LightCrimp Plus meets the relevant TIA/EIA, IEC, CECC and EN optical and mechanical specifications and operates in temperatures ranging from -10C to +60C.

LightCrimp Plus connectors are rugged

The crimp tooling for LightCrimp Plus can also be used to crimp LightCrimp connectors. For existing users of LightCrimp or pre-polished connectors, AMP offers tool kit upgrades to make the transition to LightCrimp Plus terminations easier and more cost-effective.

Tool kit upgrades

The LightCrimp Plus has been tested per industry FOTPs and exceeds all the requirements in the draft Connector Performance Specification Annex for the next release of TIA/EIA-568-B.

Performance characteristics

Description Part NumberST-Style multimode connector - ceramic ferrule suitable for 62.5/125m fibe 492642-1rST-Style multimode connector - ceramic ferrule suitable for 50/125m fiber 1278082-1SC Simplex multimode connector - ceramic ferrule suitable for 62.5/125m fiber 492643-1SC Simplex multimode connector - ceramic ferrule suitable for 50/125m fiber 1278079-1SC Duplex multimode connector - ceramic ferrule suitable for 62.5/125m fiber 1278009-1SC Duplex multimode connector - ceramic ferrule suitable for 50/125m fiber 1278080-1

LightCrimp Plus Connectors

Description Part NumberST-Style connector termination kit includes crimp tool, ST-Style die set, all-in-one stripper tool, Kevlar shears, cable holder and cleave tool. 492697-1SC connector termination kit includes crimp tool, SC die set, all-in-one stripper tool, Kevlar shears, cable holder and cleave tool. 1278022-1LightCrimp Plus ST-Style and SC/MT-RJ jack termination kit includes premium carrying case, crimp tool, ST-Style and SC die sets,all-in-one stripper tool, Kevlar shears, ST-Style and SC cable holder and cleave tool. 1278118-1Deluxe premise termination kit, MT-RJ Jack/LightCrimp Plus/LightCrimp includes premium carrying case, crimp tool, ST-Style and SC die sets, all-in-one stripper tool, Micro-stripper, Kevlar shears, ST-Style and SC cable holders, polishing plates/pads/pucks/films, strip templates, and actuator key. 1278949-1

LightCrimp Plus Termination Kits

Description Part NumberPremium softcase 1278540-1Crimper w/die-set, ST-Style 492623-1Crimper w/die-set, SC-Style 492782-1Die-set only, ST-Style 492622-1Die-set only, SC-Style 492783-1Cleaver, ST-& SC-Style 492674-1Cable holder/template, ST-Style 492703-1

LightCrimp Plus Upgrade and Replacement Tools

Description Part NumberCable holder/template, SC-Style 1278023-1Jacket/buffer/coating stripper 1278947-1Micro-stripper 492109-2Kevlar shears 1278637-1Pocket microscope 1278132-1Cleave tool replacement blade 1278219

Ferrule Type Insertion Loss - typical (dB) Temperature RangeCeramic 0.3 -10C to +60C

OPTICAL FIBEREPOXYLESS CONNECTORS


NETWORK SERVICES

For other adapter type/stylerequirement please contact !

SC

ST

FC

DIN

E-2000

Hybrid

ST to FC ST to SC

ST to SCDuplex

FC/PC TO SC

Part # Type Style Housing Sleeve Manufacturer/Supplier

SC Connectors NC-SC-MM Simplex MM 3 Plastic Phos. Bronze NEXTERANC-SC-SM Simplex SM/MM 3 Plastic Zirconia NEXTERANC-SCD-MM Duplex MM 3 Plastic Phos. Bronze NEXTERANC-SCD-SM Duplex SM/MM 3 Plastic Zirconia NEXTERANC-SC-APC Simplex SM 3 Plastic Zirconia NEXTERAST Connectors NC-ST-MM Simplex MM 2 Metal Phos. Bronze NEXTERANC-ST-SM Simplex SM/MM 2 Metal Zirconia NEXTERANC-ST-MM Simplex MM 3 Plastic Phos. Bronze NEXTERANC-STD-SM Simplex SM/MM 3 Plastic Zirconia NEXTERANC-SCD-MM Duplex MM 3 Plastic Phos. Bronze NEXTERANC-SCD-SM Duplex SM 3 Plastic Zirconia NEXTERAFC Connectors NC-FC4-MM Simplex MM 4 Metal Phos. Bronze NEXTERANC-FC4-SM Simplex SM/MM 4 Metal Zirconia NEXTERANC-FC2-MM Simplex MM 2 Metal Phos. Bronze NEXTERANC-FC2-SM Simplex SM/MM 2 Metal Zirconia NEXTERADIN Connectors NC-DIN-SM Simplex Singlmode 2 Metal Zirconia NEXTERAE2000 AdaptersNC-FC4-MMPC-15 Simplex MM 3 Plastic Zirconia Diamond SANC-FC2-SMPC-15 Simplex SM 3 Plastic Zirconia Diamond SANC-FC2-SMPC-10 Simplex SM with 0.1dB Loss 3 Plastic Zirconia Diamond SANC-FC2-SMAPC-10 Simplex SM with 0.1dB Loss 3 Plastic Zirconia Diamond SAMT-RJ AdaptersNC-MTRJ-MM Multimode 3 Plastic Polymer NEXTERANC-MTRJ/SC-MM Multimode w/SC footprint 3 Plastic Polymer NEXTERALC AdaptersNC-LCD-MM Duplex MM 3 Plastic Phos. Bronze NEXTERANC-LCD-SM Duplex SM 3 Plastic Zirconia NEXTERA

Style 1 - Floating Style 2 - Threaded Style 3 - Flanged Style 4 - Square Flanged

FC/PC to SC Female AdapterNC-FC/SC-FEMM FC to SC (Simplex) MM 3 Plastic Phos. Bronze NEXTERANC-FC/SC-FESM FC to SC (Simplex) SM 3 Plastic Zirconia NEXTERASC to ST Female AdapterNC-SC/ST-FEMM SC to ST (Simplex) MM 3 Plastic Phos. Bronze NEXTERANC-SC/ST-FESM SC to ST (Simplex) SM 3 Plastic Zirconia NEXTERANC-SC/ST-DFEMM SC to ST (Duplex) MM 3 Plastic Phos. Bronze NEXTERANC-SC/ST-DFESM SC to ST (Duplex) SM 3 Plastic Zirconia NEXTERAFC to ST Female AdapterNC-FC/ST-FEMM FC to ST (Simplex) MM 3 Plastic Phos. Bronze NEXTERANC-FC/ST-FESM FC to ST (Simplex) SM 3 Plastic Zirconia NEXTERAFC/PC to DINDS-FC/DIN-FESM FC to DIN (Simplex) SM 1/2 Metal Zirconia Diamond SA

HYBRID ADAPTERS

MATING ADAPTERS

OPTICAL FIBERADAPTERS

NETWORK SERVICES


When fiber devices are very close to each other, the signal is extremely strong and doesn't have time to attenuate or lose strength as it travels through fiber. This is called receive saturation. The fiber signal's energy level exceeds the operating range of the receiving equipment. So when the light reaches the other end, it reflects back along the cable. This distorts the signals and disrupts data. you can solve this problem with our wide range of wavelength independent attenuator, suitable for 1310 and 1550 nm. These attenuator are available in FC/PC, DIN, SC , ST LC and E2000 connector styles and in both bulkhead and in-line type. Plug-in type attenuator can be used in most applications as there small size makes them ideal for in-line use. While at the same time, their low return losses, make them ideal for both system and lab use. Bulkhead type attenuator are designed for patch panels, test equipment and lab use. In which they can be used to balance line power or to prevent detector over driving.

Reduce the strength of high power optical signal with our attenuators

Part # DescriptionBulkhead Attenuators

FC/PC Bulkhead AttenuatorsNC-FC13A-5 5dB FC Attenuator for 1310nmNC-FC13A-10 10dB FC Attenuator for 1310nmNC-FC13A-15 15dB FC Attenuator for 1310nmNC-FC13A-20 20dB FC Attenuator for 1310nmNC-FC15A-5 5dB FC Attenuator for 1550nmNC-FC15A-10 10dB FC Attenuator for 1550nmNC-FC15A-15 15dB FC Attenuator for 1550nmNC-FC15A-20 20dB FC Attenuator for 1550nmSC/PC Bulkhead AttenuatorsNC-SC13A-5 5dB FC Attenuator for 1310nmNC-SC13A-10 10dB FC Attenuator for 1310nmNC-SC13A-15 15dB FC Attenuator for 1310nmNC-SC13A-20 20dB FC Attenuator for 1310nmNC-SC15A-5 5dB FC Attenuator for 1550nmNC-SC15A-10 10dB FC Attenuator for 1550nmNC-SC15A-15 15dB FC Attenuator for 1550nmNC-SC15A-20 20dB FC Attenuator for 1550nm

Part # DescriptionPlug-In Attenuators

FC/PC Plug-In AttenuatorsNC-FC1315A-5 5dB FC Attenuator for 1310/1550nmNC-FC1315A-10 10dB FC Attenuator for 1310/1550nmNC-FC1315A-15 15dB FC Attenuator for 1310/1550nmNC-FC1315A-20 20dB FC Attenuator for 1310/1550nmDIN Plug-In AttenuatorsNC-DIN1315A-5 5dB DIN Attenuator for 1310/1550nmNC-DIN1315A-10 10dB DIN Attenuator for 1310/1550nmNC-DIN1315A-15 15dB DIN Attenuator for 1310/1550nmNC-DIN1315A-20 20dB DIN Attenuator for 1310/1550nmLC Plug-In AttenuatorsNC-LC1315A-5 5dB LC Attenuator for 1310/1550nmNC-LC1315A-10 10dB LC Attenuator for 1310/1550nmNC-LC1315A-15 15dB LC Attenuator for 1310/1550nmNC-LC1315A-20 20dB LC Attenuator for 1310/1550nmSC Plug-In AttenuatorsNC-SC1315A-5 5dB SC Attenuator for 1310/1550nmNC-SC1315A-10 10dB SC Attenuator for 1310/1550nmNC-SC1315A-15 15dB SC Attenuator for 1310/1550nmNC-SC1315A-20 20dB SC Attenuator for 1310/1550nm

For other types of attenuators and attenuation values Please contact NEXTERA

FC/PC Bulkhead

SC Bulkhead

ST Bulkhead

FC/PC Plug-In

SC Plug-In

LC Plug-In

OPTICAL FIBERATTENUATORS


NETWORK SERVICES

Innovative and easy optical fiber tool kits for every application

NEXTERA introduces a new line of fiber optic tool kits from Fiber Instruments Sales, USA. FIS has been the leader in the fiber optic industry for offering the best value on tool kits. Technicians will appreciate FIS Basic Tool Kit such as the fiber optic disposal unit, safety glasses, labeler and round cable cutter just to name a few. The Universal Epoxy Termination Tool Kit provides a technician materials to prep and connectorize standard fiber optic connectors such as ST, SC and FC. The Small Form Factor (SFF) Tool Kit allows termination of both LC and MU style connectors. Quick restoration requires mechanical splice kits and FIS offers kits specific to installing Fibrlok, Ultrasplice and Camsplice mechanical splices. For technicians searching for the ultimate tool kit, review our new Universal Multimode Test Set Kit and Contractors Kit including FIS test equipment for network performance testing.

Part # DescriptionNC-0053 Basic Tool Kit NC-0053-FI FIBRLOK Splice Restoration Kit NC-0053-US UltraSplice Restoration Kit NC-0053HM Hot Melt Tool Kit w/6 Port Oven NC-0053LM SFF Universal Epoxy Tool Kit (LC, MU) NC-0053U Universal Epoxy Tool Kit (ST, SC, FC) NC-0053UNC UNICAM Installation Kit (ST, FC, SC, LC, MTRJ) NC-0053UO Universal Epoxy Tool Kit(ST,SC, FC) w/ 24 Port Heat Oven NC-0053UNT UNICAM Installation Kit w/CTS

NC-0053

Basic Tool Kit

NC-0053U

Universal Epoxy Tool Kit (ST, SC, FC)

NC-0053UNC

UNICAM Installation Kit (ST, FC, SC, LC, MTRJ)

NC-0053-FI

FIBRLOK Splice Restoration Kit

OPTICAL FIBERTOOLS KITS

NETWORK SERVICES


Heavy Duty Cable Sheath CutterNEXTERA offers world most excellent heavy duty cable sheath cutter for the optical fiber cable installers. HDCSC-1 removes not only cable outer jackets with precision and ease of use, but also cuts single/double steel tape armoring of any type. HDCSC cuts both way (longitudinally and around the cable). Blade height and direction is adjustable. Tool comes with one spare blade as standard.

Part # DescriptionNC-HCSC-1 Heavy Duty Cable Sheath CutterNC-HCSC-1 Advanced Highly precise Heavy Duty Cable Sheath Cutter

Armored Cable SlitterTool slits outer Polyethylene jacket and armor in one operation, Performs longitudinal slitting and circumferential (ringing) for end stripping. Blade Rotates 90 by activating blade lever, allowing easy mid-span preparation (ringing & splitting) Replacement Blades Available.

Part # DescriptionNC-CSA Armored cable slitter adjustable from 8-286mm cable O.D.NC-RP5-CSA Replacement Blade (package of 5)

Miller Cable SlitterThe Miller cable slitters are manually operated cutting devices designed for fast, safe and precise jacket removal of PE, PVC and rubber jacket. The F1-114 is designed to strip cables from 4.5mm to 29mm Dia. The F1-158 is designed to strip cables from 19mm to 40mm Dia.

Part # DescriptionNC-CS114 Cable Slitter (4.5mm to 29mm diameter) NC-CS158 Cable Slitter (19mm to 40mm diameter) (not pictured)NC-RB-CS 1 Replacement Blade

Round Cable SlitterNEXTERA Fiber optic multifiber cable requires a precision tool that is capable of cutting into the protective outer jacket. The Round Cable Slitter is capable of handling cable diameters up to 1.5 inches. An adjustable blade cuts jacket thickness up to .187 inches.

Part # DescriptionNC-FIRCS Round Cable Slitter NC-FIRB Replacement Blade

Utility Cable CutterUtility cable cutter for up to 70mm cable. This Manual tool is great for standard power, coaxial, and non armored cables. Ratcheting Cutter Great for aluminum armor, not intended for ACSR.

Part # DescriptionNC-UCC-PK1

OPTICAL FIBERTOOLS

Jacket Stripper

Buffer Tube Strippers

Kevlar Cutters

Utility Knife

Fiber Scribe

Cut and strip jackets from simplex fiber cable with this precision jacket stripper. The dual "V" notch blade allows the quick removal of jacket to Kevlar(r) strength member. Plier nose, along with cushion grips and spring release are additional features making this stripper comparable to the Ideal T-Type(r) Stripper.

Part # DescriptionNC-JS01 Jacket Stripper

Buffer Tube Strippers with adjustable blades can be set for any depth to help assure nick-free jacket entry from simplex fiber to specifications on a variety of fiber optic cable up to 1/8 inch diameter. Loose tube fiber demands a precision tool capable of cutting different buffer tube diameters without nicking the enclosed fiber. Available is the blue buffer tube stripper for coaxial cable from 1/8 inch to 7/32 inch.

Part # DescriptionNC-BTS-G Grey Buffer Tube Stripper (For Fiber Applications)

NEXTERA offers variety of reliable Kevlar cutters. The non-slip serrated Kevlar(r) Cutter provides high leverage, quick action spring carbon steel shear cuts with ease. The Miller Kevlar Cutter with durable serrated cutting shears and cushion handles is also available. The Ceramic Kevlar Cutter easily trims tough Kevlar in fiber optic cables with a fast, clean cut and lasts up to 50 times longer than stainless blades.

This Utility knife features carbon 0.5mm thick steel blades and compact plastic housing. and best suitable for fiber industry job.

Part # DescriptionNC-UK5MM

Part # DescriptionNC-FOKC-CS Economy Kevlar Cutters (Carbon steel blade) NC-FOKC-SB Miller Kevlar Cutters (Steel Blade) NC-FOKC-CB Ceramic Kevlar Cutters (Ceramic Blade)

This new generation of Fiber Scribe from NEXTERA is made of carbide and designed for scratching and scribing optical fibers.

Part # DescriptionNC-FS-C01


NETWORK SERVICES

OPTICAL FIBERTOOLS

Sumitomo Stripper

No-Nik Stripper

Miller Stripper

Fitel Fiber Stripper

Cleavers

The JR-22 easily strips coating from 250um and 900um buffered fiber. The design concept and feel of precision has made it the favorite of any fiber optic tehncician. Easy to replacable blades are als available.

Part # DescriptionNC-JR22 250um and 900um fiber stripper

In a single short stroke, the red handle removes 900m buffer tube and the 250m or 500m fiber coating on tight buffer cable. The blue handle removes 250m coating from loose tube.

Part # DescriptionNC-NNS-25 250um No-Nik Fiber Stripper (Blue)NC-NNS-2590 250 or 500 or 900um No-Nik Fiber Stripper (Red)

The Miller Stripper is an exceptional tool recommended for stripping 250m coated loose tube fiber and 900m buffer tube. The Miller Stripper has a .0055 (0.14mm) laser drilled hole, soft plastic-cushioned handle grip, and super accurate hardened stripping jaws, insuring smooth clean stripping action.

Part # DescriptionNC-MS-1224 250um and 900um Miller Fiber Stripper

The Fitel S210 Fiber stripper is a stripping tools for single fibter of 250um and 900um coating diameters. It provides easy, fast and low cost stripping for preparing single fiber fusion splice.

Part # DescriptionNC-FS-S210

Rugged and Reliable, The Fitel S310 and S315 Single Fiber Field Cleavers are designed for cleaving singlemode and multimode fiber to desired lengths. The ceramic blade performs 6000 plus cleaves,

Operforming 90% of cleaves within less than 1 . Suitable for mechanical splicing with 99% cleaves within Oless than 2 . The S310 and S315 Field Cleavers can accommodate 0.25mm and 0.9mm coating diameters

and their small lightweight size makes them the perfect addition to any field splicing system. The S310 is specifically designed to cleave fiber in the field accurately to a 16mm length. The S315 has a graduated scale, which allows for cleave lengths of 5 to 20mm. Easy to use and preferred by many installers. Shipped in a protective carrying case

Part # DescriptionNC-CL-310 For cleaving to 16mm lengthNC-CL-315 For cleaving 5 to 20mm length adjusting with scale

NETWORK SERVICES


OPTICAL FIBERFIBER STRIPPERS & CLEAVERS


NETWORK SERVICES

Polishing Discs

Polishing Films

Polishing Plates, Pads and Mats

NEXTERA Polishing Kit

Hand polishing fiber optic connectors require a precision tool, capable of preparing thousands of connectors. . All NEXTERA polish discs have grooved faces adding efficiency and ease to the polishing process. These NEXTERA polishing discs are made of stainless steel and contain an internal sleeve to guide and secure the ferrule during polishing. Polish Disc are available in FC, ST, SC, MT-RJ and LC connectors styles.

Part # DescriptionNC-STPD-01 ST Polish DiscNC-STPD-04 4 Position ST Polishing DiscNC-FCPD-01 FC/PC Polish DiscNC-SCPD-01 SC Polish DiscNC-MTRJPD-01 MT-RJ Polish Disc NC-LCPD-01 LC Polish Disc

For and optimum connector polish, NEXTERA recommends a three stage polish ultizing 5um, 1um, and .3um lapping film. A choice of either 9"x6.5" or 9"x13" size may be used in polishing process. During the three step process the 5um and 1um. 9"x13" Sheet will typically yield up to 20 connectors with the .3um typically yielding 10 connectors.

Part # DescriptionLarge Sheet Polishing FilmNC-LSPF-913-03 0.3um, Alum. Oxide, 9" x 13" (Pack of 25)NC-LSPF-913-10 1um, Alum. Oxide, 9" x 13" (Pack of 25)NC-LSPF-913-50 5um, Silicon Carbide, 9" x 13"(Pack of 25)Standard Sheet Polishing FilmNC-SSPF-913-03 0.3um, Alum. Oxide, 9" x 6.5" (Pack of 25)NC-SSPF-913-10 1um, Alum. Oxide, 9" x 6.5" (Pack of 25)NC-SSPF-913-50 5um, Silicon Carbide, 9" x 6.5" (Pack of 25)

The polishing of fiber optic connectors calls for both a hard flat surface and a cushioned pad. The 9"x13" or 6"x9" polish plate is available in Safety Glass and mounted on four rubber feet or supports. When polishing PC Style pre-radius connector use the soft polish pad on the glass plate. Placing the lapping film over the pad assures the removal of epoxy and proper of fiber without destroying the pre-radius ferrule.

Part # DescriptionNC-PP-913 Polish Glass Plate (9x13")NC-PP-69 Polish Glass Plate (6"x9")NC-PPM-55 Soft Polish Pad (5"x5")NC-PPM-2214 Large Black Work mat (22"14")

Now available from NEXTERA is a handy polishing kit. Included in a compact rugged case are all the tools needed to complete your hand polishing requirements. This kit offers excellent value since the cost of the kit is much less than if all components were purchased separately.

Contents: (1) ST Polish Disc. (1) SC Polish Disc, (1) FC Polish Disc, (1) SMA Polish Disc, (6) Optic Preps, (1) Soft Polish Pad, (6) Sheets 1um Polish Films 5" x 5", (6) Sheets 5um Polish Film 5"x5", (6) Sheets of .3um Polish Film 5"x5".

Part # DescriptionNC-FPK-1S Polishing Kit

OPTICAL FIBERPOLISHING ITEMS

NETWORK SERVICES


Automatic Alcohol Dispensing BottleConvenient access to fluid protects product purity. Just press down and alcohol pumps up. Valve seals contents in bottle, and fluid remains contamination free. This 8 oz. opaque plastic dispenser has a wide bottom for added stability and features a locking pump mechanism.

Part # DescriptionNC-ADB-8E Automatic Alcohol Dispensing Plastic Bottle (Empty)NC-ADB-8L Automatic Alcohol Dispensing Plastic Bottle (Filled)

KIM WipesContains in a single box of KIM wipes are 280 tissues. The fiber optic industry demands a lint free product when used with alcohol for cleaning fiber and connector end faces.

Part # DescriptionNC-KW-280T Kim Wipes - 1 box

CLETOP Precision Fiber Optic SwabsCompact, lightweight, disposable and safe to use, These CLETOP precision wrapped foam swabs provide outstanding particle entrapment in removal of tough contaminants. Both 2.5mm and 1.25mm swabs are best suitable for cleaning adapters, polish plates, and connector end faces.

Part # DescriptionNC-CPS-250 2.5mm CLETOP Precision Fiber Optic Swabs (50 Sticks per pack) NC-CPS-125 1.25mm CLETOP Precision Fiber Optic Swabs (50 Sticks per pack)

Connector CleanerChoose from different hand held connector cleaners as an alternative to alcohol or solvent and wipes. All cartridges offer dry woven cloth which effectively remove dirt, dust, oil, grease, and debris from connector end faces. NEXTERA CLETOP-S series provides top qulity performance by easily and quickly cleans ferrule end-faces, the most important component in maintaining the quality of fiber-otpic connections. It's an alcholol-free dry cloth solution

Part # DescriptionNC-CCC-1411A CLETOP Type-A Automatic Connector Cleaner (for dust contamination) NC-CCC-1411B CLETOP Type-B Automatic Connector Cleaner (for oil contamination) NC-CCC-1411A Replacment Cartridge for CLETOP-S Type-A NC-CCC-1411B Replacment Cartridge for CLETOP-S Type-B

Part # DescriptionNC-FIS-7111 FIS Connector Cleaner (25 ft.)NC-FIS-7112 Woven Film Replacement Reel (25 ft.)

While FIS Connector Cleaner is an affordable and essential tool in your otpical fiber kit. It's an alcholol-free dry cloth solution. Replacement reels available for all units

FIS Connector Cleaner

OPTICAL FIBERCONSUMABLES


NETWORK SERVICES

Optical Couplant Optical couplant provides and effective way of reducing Fresnel reflections, and decreasing power loss in connectors and mechanical splices. Easy applied onto connector end faces and inside mechanical splices.

Part # DescriptionNC-OC-0001 Matching Gel (.4 oz.)

Piano WireA smart way to save a connector when a fiber breaks inside a ferrule during connectorization. Also an excellent tool to remove broken fiber from bare fiber adapters. The 0.004" (125um) diameter wiere is also used in connectorization process to apply epoxy to protruding fiber at ferrule. Sticky colored tabs provided to hold wire.

Part # DescriptionNC-PW-8265 Flexible Piano Wire (8 pieces @3")

Isopropyl AlcoholUsed in cleaning fiber or connector end faces for better transmission performance (4 oz. container bottled with 99% isopropyl alcohol). The plastic gallon container may be used to refill the NEXTERA automatic dispensing bottle. Please note, all alcohol orders must be shipped by ground only and in regulated quantities.

Part # DescriptionNC-IA-01 1 Liter Isopropyl Bottled Alchoho

Wire Markers Number and LettersBrady's number and letter wire marker cards are available in a variety of materials and styles. These durable markers will stand up to harsh environments and ensure long-term wire identification.

Part # Description NC-12001 Wire Markers (numbers 1 to 33)

Optical Fiber Warning Tape Protect and locate buried optical fiber cable by placing buried warning tape above cable. A 10cm wide continuous strip labeled "Caution, Fiber Optic cable Buried Below". A very minimal cost provides added protection against possible fiber breakage. Available in standard yellow color. Other sizes available on request

Part # DescriptionNC-OFWT-Y10 10cm wide, Yellow, Optical Fiber Warning Tape

OPTICAL FIBERCONSUMABLES AND MARKINGS

NETWORK SERVICES


Connector Heat Oven

Fiberscopes

Dead Zone Eliminator

Epoxy Application Syringe

Epoxy For Connectorization

NEXTERA Connector Heat Oven includes 24 position holding block to cure a variety of connectors including FC, ST, SC, D4, LC and SMA. The front panel features temperature control and new power "on" light indicator, allowing the proper cure of several types of epoxy. The block design provides even heat distribution, minimizing connector heat loss. A thermometer is included with every oven. A curing stand is sold separately to provide easy placement of optical cords during curing.

Part # DescriptionNC-CHO-220 24 Port Connector Heat Oven (220 V) with FC/ST/D4/SMA/SC connector block and

Thermometer NC-CHO-HBLC LC/MU Holding Block NC-CHO-CS Curing Stand

This low cost, high quality optical fiberscope is available with both 200X and 400X magnifications. It utilizes a white light LED for coaxial illumination to provide excellent detail of scratches and contamination. The fiberscope is powered by three AAA batteries which run at least 40 hours before replacement. The microscope is provided with a universal adapter for 2.5mm connectors including ST, FC, and SC. Adapters for other common connectors are also available.

Part # DescriptionNC-M200 200X Optical Microscope with Coaxial Illumination NC-M400 400X Optical Microscope with Coaxial Illumination NC-MFAPC FC/APC Adapter for Microscope NC-MLC LC Adapter for Microscope NC-MMTRJ MTRJ for Microscope NC-MSAPC SC/APC Adapter for Microscope

Designed to aid in the testing of fiber optic cable when using an OTDR. The DZE is used with Optical Time Domain Reflectometers (OTDR's) to help minimize the effects of the OTDR's launch pulse on measurement uncertainty. Available in different fiber lengths.

Part # DescriptionNC-DZE-S100 100 Meter SinglemodeNC-DZE-S200 200 Meter SinglemodeNC-DZE-S500 500 Meter SinglemodeNC-DZE-S1000 1000 Meter SinglemodeNC-DZE-S1100 1100 Meter Singlemode

Individually packaged syringes are complete with syringe body and dispenser (needle), for injecting epoxy into the connector. A larger diameter applicator needle.

Part # DescriptionNC-EAS-01 Empty Syringe w/needle

Each pre-measured two part packet contains the proper ratio for connectorization. Every packet includes specific directions for use with fiber optic connectors. One 2 gram package will prepare 25-35 connectors. One 4 gram package will prepare 50-70 connectors.

Part # DescriptionNC-H15-080-R2 Epoxy For Conectorization, 2gm, 15 Min Heat cure, 4 Hrs pot life, Quick Cure styleNC-T60-065-B2 Epoxy For Conectorization, 2gm, 1 Hr Heat cure, 2 Hrs pot life, Blue Dye style

OPTICAL FIBERMISCELLANEOUS


NETWORK SERVICES

Fusion Splice Protection Sleeves

Elastomeric Lab Splice

3M Fibrlok Mechanical Splice

AMP Corelink Mechanical Splice

NEXTERA Fusion Splice Heat Shrink Sleeves enable installers to protect and support fiber optic fusion points. A red colored splice sleeve wil allow you to identify resplice locations or help identify the individuals who actually performed splice. Splice sleeves shrink to a size that allows for use in most splice trays. The inner tube is made of a material which will completely melt around the fiber to provide a moisture resistant barrier.

Part # DescriptionNC-FSHSS-60C Fusion Sleeves (Clear) 60mmNC-FSHSS-60R Fusion Sleeves (red) 60mmNC-FSHSS-40C Fusion Sleeves 40mm

NEXTERA Elastomeric Lab Splice is ideal for making temporary fiber connections, since it can be disassembled and reused hundreds of times. To install splice for instrument testing, simply insert on a cleaved pigtail from OTDR or power meter to the cleaved unconnectorized fiber. Excellent for both multimode and single mode fiber, the housing receives 125um - 140um cladding diameters.

Part # DescriptionNC-ELS-125140 Lab Splice

The Fibrlok has an insertion loss 7.75 lbs. Known for low reflection characteristics of -35dB. Using V groove technology, it requires no epoxy. Uses Fibrlok assembly tool 2501. Splice completed in 30 seconds after preparing fiber ends. Thermal stability of -400C to 800C. Now one part # fits 250-900m buffer sizes.

Part # DescriptionNC-UFS-3M2590 Universal Fibrlok Splice for 250um-900um buffer sizes NC-UFS-3MFAT Fibrlok Assembly Tool

The Corelink provides an average splice loss of .15dB on 125um fiber with an average installation time of 30 seconds. One splice style accepts 250um to 900um coating. Two assembly splice keys are provided with set of 12 splices.

Part # Description 503901-1 AMP Corelink Mechanical Splice

OPTICAL FIBERSPLICES ---- MECHANICAL/FUSION

Extension of Broadband Access

Extension of Office Networking Backbone

Hot-Spot & OutdoorApplications

Broadband ON AIRExcellent Wireless LAN Networks

S121AFTTH SplicerS121AFTTH SplicerS121AFTTH Splicer

Fusion Splicing in the Palm of Your Hand!Fusion Splicing in the Palm of Your Hand!

FURUKAWA ELECTRICFURUKAWA ELECTRIC

More Compact than ever!

High-end performance with super low cost!

More Compact than ever!

High-end performance with super low cost!

NETWORK SERVICES


8121A Standard PackageSplicer Body S121-X-A-0001Battery S943Soft Carrying Case S121-X-A-0002Strap S121-X-A-0008250um Fiber Holders S709S-250AC Adapter S957Battery Recharger S958Extra Electrodes S963Manual S121-X-A-0006Electrode Cleaning Disk

S121A Optional AccessoriesHeat Shrink Oven S121-X-A-0003Tool for ULTRAsleeve" S121-X-A-0004Hard Carrying Case S121-X-A-0005DC Adapter S959900/im Fiber Holders S709S-900Extra Battery S943Extra Electrodes S963

NAME DESCRIPTIONO R D E R I N G I N FO R M AT I O N

Types of Fiber SM, MM; single fiberCladding Diameter 125pmCoating Diameter 250/900um*2Average Loss SM:0.10dB, MM: O.OSdBSplice Time 13s(in room temperature)Heat Shrink Time 120sSplicing Programs 3(SM, MM, other)Tension Test 1.96N(@200g)Cleave Length 10mmApplicable Sleeve Lengths 40mmDimensions 140WX205DX95H(mm) [5.5'WX8"DX3.7'H]Weight 980g/2.2lbs.(body), 170g/6 oz. (battery)AC Input 100240VDC Input DC12~17V(Li-ion battery)Battery Capacity 50 splices(splice only; does not include heat

shrink)Operating Temp. -10 to 50C (without excessive humidity)

S P E C I F I C AT I O N S

Compared to FITEL' s S199, the S121A is 1/3 the size and weighs only 980g/2.21bs without the battery (battery weight is 170g/6 oz.). These compact dimensions allow you to splice in almost any location.

With the standard soft carrying case and strap, the S121A is just as portable as a camera. You can attach the carrying case to your belt for hands-free portability.

Superb Portability

(Also available is a hard carrying case, which holds necessary tools and accessories.)

13 seconds and Fully Automatic

Operating the S121A is simple. Just set the fibers in place and press a button! The whole process, from fiber feed to tension test, is fully automatic.

Very often in FTT(x) splicing, setting the splicer on a flat surface simply isn't possible. That is why the S121A is designed to be a handheld unit.

Handheld Splicing

The S121A comes standard with a 2.5-inch color LCD monitor, which displays a magnified image of the fibers as

For cordless usage, the S121A comes with a rechargeable Lithium ion battery and recharge. The recharger can accommodate up to 2 batteries at a time. Remaining charge is displayed on the screen for easy monitoring. AC power is also available with the optional accessory(S959).

viewed by the CCD camera. This allows for simple and accurate confirmation of the splice quality. Both fibers are automatically inspected before the splice.

Thanks to the T-shape of the S121A, you can actually set the splicer inside the closure and splice with very short fiber lengths.

Short Fiber Lengths

Again, similar to standard fusion splicers, the S121A offers an optional heat shrink oven for applying protection sleeves to the splice. An optional tool for applying non-shrink ULTRA sleeves also available.

Heat Shrink Capability

Compact, Lightweight Body A Clear View of the Splice Battery or AC/DC Power Options

FURUKAWA ELECTRIC

OPTICAL FIBERFUSION SPLICERS

The World's Fastest Core-Aligning Fusion Splicer

Average Splice Loss: SM (0.02dB )

NETWORK SERVICES


Splicing Method: Core Alignment (Profile Alignment System)Fiber Types: Single FiberApplicable Fibers: SM , MM , PS, NZ-DS, EDF, TrueWaveRS , LEAFTypical Average Splice Loss: SM (0.02dB), MM (0.01 dB), PS (0.04dB) , TrueWaveRS (O.OSdB), LEAF ( 0.03dB) (with identical fibers)

Splice Time: 11 seconds in high speed mode; 1 3 seconds in normal modeHeating Time: 85 seconds for 60mm sleeves; 40 secondsfor20mm sleevesCoating Diameter/ Clad Diameter: 100 -1000um / 80-150|j.mSplice Programs: 35 p re-installed, 29 user programmableSplice Tension Test: 200g (0.4lbs)Recom m ended Cleave Length: 5-1 6 mm / 250 um , 10 or 16 mm / 900 um and 400 um coatingProtection Sleeve Programs: 7 pre-installed,1 user program m ableMonitor: 5" Color, 264x magnificationSplice M em ory: 2000 SplicesV-groove Lighting: White LEDTemperature: -10 to +50C (14 to 122F)Other Features: Short cut key, Auto start mode, Auto sleep mode, Remote control from PC, Attenuation Splicing : 0 to 10 dB by

0.1dB, Environmental sensor at the splice point, Fiber dimension measurement function

Typical Package for S176 CF & CR: S176CF(R) E-1110S176-F(R)-A-0001-A S176CF(CR) Main bodyS176-X-S-0007-A S176 User's Manual (English)S176-X-A-0011-A Protection Sleeve HeaterS176-X-A-0010-A S176CF/CR Carry ing CaseS940 Battery PackS176-X-A-0016-A 16mm Rber HoldersS950 AC/ DC ConverterS176-X-A-0017-A Recharging CableS176-X-S-0002-A AC Power CordS1 76-X-S-0003-A AC PI ug AdapterS176-X-S-0004-AElectrode Sharpener Spare ElectrodesS1 76-X-S-0005-A Wedge-Shaped Base

Optional Parts for S176CF & CROptional Parts for S176LPS176-X-A-0012-A Cool ing TrayS176-X-A-0013-A 10mm Rber HoldersS176-X-A-0015-A RS232C CordS176-X-A-0017-A Recharging CableS176-X-S-0018-A Rexible LampS176-X-A-0019-A Foot Sw itchS176-X-A-0020-A Work TableS1 76-X-A-0023-A S176RCPCDS954A Battery Recharger / DischargerS532A Extra Sleeve HeaterS955 DC AdapterS942 High Capacity BatteryS176-X-A-0024-A Heater CoverS1 76-X-A-0025-A Fiber Holder MountS176-X-A-0026-A Crimping Tool MountS707-250 Fiber HoldersS707-400 Fiber HoldersS707-900 Fiber Holders

Typical Package for S176LP: S176LPE-1102S176-L-A-0001-A S176LPMain BodyS176-X-S-0007-A S176 User's ManualS176-X-A-0011-A Protection Sleeve HeaterS176-X-A-0021-A S176LP Carrying CaseS176-X-A-0025-A Rber Holder MountS176-X-S-0002-A AC Power CordS176-X-S-0003-A AC Plug AdapterS176-X-S-0004-A Spare ElectrodesBeet rode Sharpener

Optional Parts for S176LPS176-X-A-0013-A 10mm Rber HoldersS176-X-A-0015-A RS232C CordS176-X-A-0016-A 16mm Rber HoldersS176-X-S-0018-A Rexible LampS176-X-A-0019-A Foot SwitchS176-X-A-0020-A Work TableS176-X-A-0023-A S176RCPCDS176-X-A-0024-A Heater CoverS532A Extra Sleeve HeaterS942 High Capacity BatteryS176-X-A-0026-A Crimping Tool MountS707-250 Fiber HoldersS707-400 Fiber HoldersS707-900 Fiber Holders

SPECIFICATIONS

NAME DESCRIPTIONO R D E R I N G I N FO R M AT I O N

NAME DESCRIPTION

OPTICAL FIBERFUSION SPLICERS FURUKAWA ELECTRIC


NETWORK SERVICES

S324S322

Ahcieve high quality cleaves with S323/S324 Fiber Cleavers

Introducing Furukawa Electrics line of high precision three and four step cleavers. The S324 cleaver is an ergonomic, easy to use three step cleaver that replaces Fitels well known S321 cleaver. The S324 is a smaller," no frills" cleaver that produces consistent, high quality cleaves efficiently and quickly. Based on the S324 design, the S323 High Precision Cleaver incorporates a unique automatic waste fiber disposal system. This unique waste fiber collection system eliminates potentially hazardous waste fiber from the splice area and produces consistent high quality splicing.

Applicable Optical FiberNumber of fibers: single fiber to 12-fiber ribbons (appropriate

fiber holder is required for ribbons)Clad diameter: 0.125mmCoating diameter: 0.25mm and 0.9mm for single fiber; 0.3mm

to 0.4mm thickness for ribbons

Cleave lengthType A: fixed length of 16mm or adjustable to

320mm with scale for single fiber; 10mm for ribbons

Type B: fixed length of 10mm or adjustable to 320mm with scale for single fiber; 10mm for ribbons

S P E C I F I C AT I O N S

For 323 and 324:

. Cutting blade locks in place after scoring, preventing double scoring of fiber and also ensuring quality cleaving angles.

. Automatic cleave function provides constant cleaving pressure and improves cleave quality.

For 323 only:

. Waste fiber deposits automatically into a collection chamber,increasing cleaving efficiency by eliminating manual disposal and also eliminating hazardous waste fiber in the work area environment.

. Easily removable collection chamber allows for safe and secure waste fiber disposal.

KE Y FE AT U R E S

(Refer to the Cleave Length)S323A Available Type AS323B Available Type BS324A Not Available Type AS324B Not Available Type B

PART NO. WASTE FIBER COLLECTIONO R D E R I N G I N FO R M AT I O N

CLEAVE LENGTH

1 Close lid

2 Slide blade

3 Close pinch roller

4 Press to open lid

Note: For S324 omit step 3.

OPTICAL FIBERCLEAVERS

For detailed info and specs see page 00 to11

For both single and ribbon fibersHigh degree of hardness

O8 angled cleaver is available

Automatic cleaving (one action)OLow cleaving angle:

Electrode for Fusion splicerOur electrodes are 100% compatible with referredcompanies 'fusion splicers'.Blade Life time : 3,000~5,000 times

Electrode for FUJIKURA

ELCT1-25LECT2-16

Electrode for FURUKAWA

S-174S-175S-176

Electorde for SUMITOMO

ER-6ER-7ER-8

Electrode for ERICSSON

FSU-975 FSU-995RSU-15

Blade for CleaverDifferent type blades are able to use 10%~20% longer than other companies' blades.100% compatible with those of other referred companies.

Blade for FUJIKURA Blade for FURUKAWA Blade for SUMITOMOBI-01 BI-05 BI-02 BI-03

Fiber Holder

Model Fiber typeHI-025 0.25 mm Single FiberHI-09 0.9 mm Single FiberHI-2 2 Fiber RibbonHI-4 4 Fiber RibbonHI-6 6 Fiber RibbonHI-8 8 Fiber RibbonHI-10 10 Fiber RibbonHI-12 12 Fiber Ribbon

Protect your optical fiber splices with world leading Tyco closuresNEXTERA stocks completes range of closures from Tyco. These environmentally-sealed enclosures are suitable for all fiber management functions required in the external network between the exchange and the fiber termination point. Designed to save time and increase technician productivity, these closures does not requires no special tools or equipment for installation. Tyco closures is a full series of spice closures and splice trays used for housing, organizing and protecting single and mass fusion fiber splices.

NETWORK SERVICES


Slim In-line Closure Slim, elegant and compact, This in-line closure FOSC-500AA from Tyco is the environmentally sealed enclosure for fiber management in the outside plant network for aerial, underground or direct buried applications. It is a cold applied re-usable closure housing cable attachment units and one mass splicing tray to accommodate up to 24 Fusion Splice Protectors. They fit perfectly well as a customer drop, tap-off or in-line splice closure in the low fiber count part of the network and compatible with most existing cable constructions (loose tube, central core, slotted core)

Part # DescriptionNC-FOSC-500AA-L24 24 Fiber In-Line Closure, Splice Tray

Note: At the time of ordering, Please specify cable type (loose tube, central tube or slotted core), with/without valve (for flash test), and with/without ground feed through requirement.

FOSC-500B In Line ClosureSuitable for repair, tap-off and in-line splice applications, Tyco FOSC-500B is the environmentally sealed enclosure for fiber management in the outside plant network. The wraparound thermoplastic housing consists of 2 half shells which are sealed with an O-ring system. This product is a cold applied re-usable closure system housing FOSC cable attachment units and can hold up to 6 splicing trays to accommodate a total capacity of 144 Fusion Splice Protectors. FOSC 500B comes with 6 cable ports to accommodate 7 to 40mm diameter cables through different entry routes.

Part # DescriptionNC-FOSC-500B-S24 24 Fiber In-Line Closure, Splice Tray NC-FOSC-500B-S48 48 Fiber In-Line Closure, Splice Tray NC-FOSC-500B-S72 72 Fiber In-Line Closure, Splice Tray NC-FOSC-500B-S96 96 Fiber In-Line Closure, Splice TrayNC-FOSC-500B-S120 120 Fiber In-Line Closure, Splice Tray NC-FOSC-500B-S144 144 Fiber In-Line Closure, Splice Tray

Note: At the time of ordering, Please specify cable type (loose tube, central tube or slotted core), with/without valve (for flash test), and with/without ground feed through requirement and closure applications.

FOSC-450 Dome Type ClosureAvailable in three sizes, The Tyco FOSC 450 family of fiber optic splice closure offers a versatile gel seal technology for cable terminations. Gel seal cable terminations automatically adjust to cable size and shape, and they require no special tools, tapes or mastics to install. On the other hand, It is also easy to remove cables, as gel seals are completely re-usable. This new product FOSC 450 series, can be used in any environment (aerial, pedestal, buried, underground) and for numerous splice applications (expressed, tap-off, branch and repair) to accommodates 768 single fibers splices. This closure can be re-entered without special tools, torches or electrical power in a fraction of the time usually required. The FD06 contains one transition tray, one splice tray and capacity for one additional splice tray. The FD08 contains one transition tray, one splice tray and capacity for three additional splice trays. FOSC 450 comes with 6 cable ports to accommodate 9 to 25mm diameter cables at single end and is compatible with most common cable types: e.g. loose tube, central core, slotted core, ribbon fiber.

Part # DescriptionNC-FOSC-450-BS Dome Type Closure, 12 to 144 single fiber splice capacityNC-FOSC-450-B6 Dome Type Closure, 12 to 144 single fiber splice capacityNC-FOSC-450-D6 Dome Type Closure, 36 to 768/1152 single/ribbon fiber splice capacity

Note: At the time of ordering, Please specify cable type (loose tube, central tube or slotted core), with/without valve (for flash test), and with/without ground feed through requirement and closure applications.

FOSC DMARC Closure The FOSC-DMARC closure is the environmentally sealed enclosure for the fiber management system that provides the functions of fiber splicing and patching in the external network. The single-element design makes the FOSC-DMARC the ideal solution for a flexible carrier demarcation point with a capacity of up to 4 carriers of 12 fibers each, providing a total capacity of 48 pigtails or 48 connector patchpanel. Extra carriers/customers can be connected to the backbone side of the network without disturbing other, already connected carriers/customers. FOSC-DMARC Closures comes with 5 round entry/exit ports for drop cables and 1 oval port for 2 cables and equipped with ground feed-through and pressure relief valve as standard. FOSC DMARC supports all type of connectors and adapters.

Please contact NEXTERA to specify your requirement.

OPTICAL FIBERCLOSURES


NETWORK SERVICES

NEXTERA fiber distribution frames for reliable cable managementThe NEXTERA Wall Mounted Termination Boxes and Fiber Distribution Family provides interconnect capabilities between the distribution cables and the opto-electronics. It is designed with controls that maintain the fiber bend radius throughout the unit on the segregated customer and provider sides. These products are ideal in applications that require low-fiber count application. For convenient cable management, it provides termination, splicing and storage functions for fiber optic cable systems. Also it features mechanical and environmental protection for both the fiber and its components.

12/24 Port Weather Proof Optical Termination BoxTotally water proof, Made of stainless steel, lockable and high quality paint work, NEXTERA 12 and 24 Port weatherproof Optical Termination Box offer protection against any environmental and mechanical effects. This Weatherproof optical termination box includes four cable entry/exit points for cable and jumper cords. For convenient cable management, it provides termination, splicing and storage function for optical fiber cable systems. The termination box is best suitable for outdoor environment and can be used for various applications such as pole and wall for anchor bolt, arm tie and etc.

Part # DescriptionNC-ONCWP-W06 6 Ports, Optical Termination Box, Wall Mount, splice trayNC-ONCWP-W12 12 Ports, Optical Termination Box, Wall Mount, splice tray NC-ONCWP-W24 24 Ports, Optical Termination Box, Wall Mount, splice tray

Notes - For Adapters, Pigtails and Patchcords, please order separately. - When Ordering, Please specify connector/adapter style and splice method.

NEXTERA Economical Wall Mount Fiber Distribution Frame NEXTERA 12 and 24 Wall Mounts Fiber Distribution Frame allowing both splicing and connecting fiber optic cables between outside plant and equipment insdie the building and communication facilities. NEXTERA FDF can splice and terminate 12 or 24 Fibers and provide optimum access to the splice trays and adapter panel. Made of ruggedized stainless steel, NEXTERA FDF comes with lockable door and provide cable management for both loose tube and ribbon type cables.

Part # DescriptionNC-FDF-WM06 6 Ports, Optical Termination Box, Wall Mount, splice trayNC-FDF-WM12 12 Ports, Optical Termination Box, Wall Mount, splice tray NC-FDF-WM24 24 Ports, Optical Termination Box, Wall Mount, splice tray

Notes - For Adapters, Pigtails and Patchcords, please order separately. - When Ordering, Please specify connector/adapter style and splice method.

4 Port Wall MountThe 4 Port Wall Mount Box is a compact design ideal for data applications. It can either be wall mounted or placed in a floor box and can house up to 4 SC, FC abd ST style in-line adapters and pigtails. Connectors can be easily terminated or cable spliced together. The wall mount has facilities for incoming cable/fiber to be presented via mini-trunking grommets.

Part # DescriptionNC-ODF-WMB4P 4 Port Box, wallmount, Unloaded (for SC, FC and ST adapters styles)

Notes 1. When ordering, please specify connector/adapter style. 2. For Pigtails and Patchcords, please order separately.

OPTICAL FIBEROFDF ---- WALLMOUNTED

NETWORK SERVICES


19 Patch Panels

Notes - When ordering, please specify connector/adapter style. - For Pigtails and Patchcords, please order separately.

NEXTERA all-metals patch panels accepts SC, MT-RJ, LC and FC style adapters. Painted Black, this patchpanel holds twelve simplex adapter sleeves. You may request that to install your purchased adapters into the patchpanel. For other adapter style Patchpanels please contact NEXTERA.

Part # DescriptionNC-PP19-SC 19 Patchpanel for SC, Rackmount, UnloadedNC-PP19-FC 19 Patchpanel for FC, Rackmount, UnloadedNC-PP19-LC 19 Patchpanel for LC, Rackmount, UnloadedNC-PP19-ST 19 Patchpanel for ST, Rackmount, UnloadedNC-PP19-MTRJ 19 Patchpanel for MT-RJ, Rackmount, Unloaded

24/48 Ports Rackmount Fiber Distribution Frames

Rapid deployment, simple use and flexibility Designed for indoor use, NEXTERA 19" Rackmount Fiber Distribution Frame series is designed for low or high density patching applications and can accommodate outside plant, riser, and indoor cables . NEXTERA Rackmount series teminate and splice 12, 24, or 48 fibers and provide storage, and cable connections together in a unit. The modular design increases compatibility so this series are applicable to your existing systems without any modification or additional work. Frontal access and the unique adapter arrangement design will increase your work speed and maintenance efficiency.

12 Port Rackmount Fiber Distribution FramesThe 12 and 24 Port Rack Mount Enclosures from NEXTERA provide modular design to fit almost every need and can be stacked to accommodate future network growth. These modular Distribution Frames provide greater management facility to house fiber terminations and accommodate patching splicing of fiber links. All work can be done from the front of the frame for fast-efficient installation in tight spaces. Front access design provide optimum access to the splice trays and fully control loose tube and jumber cords for service loops. All metal construction incorporates a high quality, uniform rust-resistant finish with no sharp edges for consistent performance and long life.

Part # DescriptionNC-FDF-RM24F 24 Ports, Fiber Distribution Frames, Rack Mount, splice trayNC-FDF-RM12F 12 Ports, Fiber Distribution Frames, Rack Mount, splice tray


48 Ports FDF Front View

48 Ports FDF Back View

NEXTERA introduces a new line of smart distribution panels for patching and splicing fiber optic cable networks. The NEXTERA FIS Rack Mount Enclosure is designed for low or high density patching applications. These lightweight and easy to handle distribution frames are durable and rust free aluminium housing. These 24 and 48 port Fiber Distribution Frames are available in attracted Beige and silver gray colours in an affordable price. Lockable doors are also available as an option.

Part # DescriptionNC-FDF-RM48A 48 Ports, Fiber Distribution Frames, Rack Mount, splice trayNC-FDF-RM24A 24 Ports, Fiber Distribution Frames, Rack Mount, splice tray


24 Ports FDF Front View 24 Ports FDF Back View

OPTICAL FIBEROFDF ---- RACKMOUNTED

Page 1Page 2Page 3Page 4Page 5Page 6Page 7Page 8Page 9Page 10Page 11Page 12Page 13Page 14Page 15Page 16Page 17Page 18Page 19Page 20Page 21Page 22Page 23Page 24Page 25Page 26Page 27Page 28Page 29Page 30Page 31Page 32Page 33Page 34Page 35Page 36Page 37Page 38

Fiber Optics

Documents