Fiber laser marking applications

Fiber Laser Marking Applications

Fiber Laser Marking ApplicationsAll Direct Part Marking• All Metals

• Carbon Steel• Stainless Steel• Aluminum• Titanium• Nickle• Etc.

• Plastics• Spray is not required on

surface of material.

Great For Engraving Metals

www.selasersolutions.com

Fiber Laser Marking Carbon Steelwww.selasersolutions.com

Engrave – Vaporization of base material sufficient to produce depth from 0.001” to 0.020” or deeper.

Burn Mark – High speed mark that produces good contrast with some burn into material.

Annealed Mark – Draws carbon to the surface creating a black contrast with a smooth surface finish. No penetration into material.

THREE TYPES OF MARKS

Fiber Laser Marking Stainless Steelwww.selasersolutions.com

Annealed Mark – Draws carbon to the surface creating a black contrast with a smooth surface finish. No penetration into material.

Burn Mark – High speed mark that produces good contrast with some burn into material.

Engrave – Vaporization of base material sufficient to produce depth from 0.001” to 0.020” or deeper.


Fiber Laser Marking Aluminumwww.selasersolutions.com


• Burn Mark – High speed mark that produces good contrast with some burn into material.

• Frosted/White Mark – High speed mark that produces a frosted or white contrast.

• Engrave – Vaporization of base material sufficient to produce depth from 0.001” to 0.020” or deeper.

Fiber Laser Marking Anodized

White Mark


Fiber Laser Marking Plastic

Two Types Of Marks• White on Colored Plastics• Dark on White Plastics


Annealed Mark On 316SS


Titanium


Carbon Steel


Powder Coat


Anodized Aluminum


Carbon Fiberwww.selasersolutions.com

Why Laser Mark?• Product Identification

• Part #• Serial #

• Traceability• Data Matrix• UID Code• UDI Code• QR Code

• Marketing• Logo – Branding

• Sales• Customize Products – Add

customer logo on parts to generate greater sales


Fiber laser marking applications

Engineering