TM PURITYTM FG WO WHITE MINERAL OILS Introduction Petro-Canada’s PURITYTM FG WO oils are ultra pure, food grade white mineral oils specially formulated for food processing, pharmaceutical and agricultural industries. Using the patented HT purity process, Petro- Canada produces 99.9% pure, crystal clear white mineral oils – the purest in the world. Blended with a stabilizer for extended shelf life, PURITY FG WO oils are ideally suited for applications that require a straight, non-toxic white mineral oil. PURITY FG WO oils meet the highest food industry purity standards and fit perfectly in HACCP (Hazard Analysis and Critical Control Point) and GMP (Good Manufacturing Practice) plans. They are H1 and 3H registered by NSF and n, n3, and u1 registered by the Canadian Food Inspection Agency. Features and Benefits • Low volatility • Minimizes consumption • Includes an oxidation inhibitor for stability • Extended shelf life • Odourless and tasteless • Rapidly separates from water • Excellent low pour characteristics • Good fluidity at low temperatures • Water white in colour, does not stain • Fully approved for use in and around food processing areas • H1 registered by NSF as a lubricant with incidental food contact for use in and around food processing areas • 3H registered by NSF for use as a release agent on hard surfaces to prevent food from adhering during processing • Registered n, n3, and u1 by the Canadian Food Inspection Agency (CFIA) • Certified Kosher and Pareve by Star K • Certified Halal by IFANCA • Meets United States Food and Drug Administration (FDA) regulations: • CFR 21, Section 172.878 - White Mineral Oil • CFR 21, Section 178.3620 (a) - White Mineral Oil • CFR 21, Section 178.3570 - Lubricants with Incidental Food Contact • CFR 21, Section 176.170 - Components of paper and paperboard in contact with aqueous and fatty foods • PURITY FG WO 35, 68 and 90 meet mineral oils, USP (United States Pharmacopoeia standards) • PURITY FG WO 15 meets Light Mineral Oil, NF (National Formulary) • PURITY FG WO 15 is approved by the United States Department of Agriculture (USDA) for use as a protecting oil on Shell Eggs processed in plants operating under the USDA voluntary shell egg grading program • Maintains food allergy safety • Free of gluten • Contain no peanuts, tree nuts, or their derivatives • Manufactured in a facility that does not manufacture, store, or otherwise handle any peanuts or tree nut product 59-111551-2 ECO 801083 SHEET 2 OF 9
8
Embed
FG WO W INERAL OILS - · PDF fileTM PURITY TM FG WO WHITE MINERAL OILS Introduction Petro-Canada’s PURITY TM FG WO oils are ultra pure, food grade white mineral oils specially formulated
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
TM
PURITYTM FG WO
WHITE MINERAL OILS
Introduction
Petro-Canada’s PURITYTM FG WO oils are ultrapure, food grade white mineral oils speciallyformulated for food processing,pharmaceutical and agricultural industries.
Using the patented HT purity process, Petro-Canada produces 99.9% pure, crystal clearwhite mineral oils – the purest in the world.Blended with a stabilizer for extended shelflife, PURITY FG WO oils are ideally suited forapplications that require a straight, non-toxicwhite mineral oil.
PURITY FG WO oils meet the highest foodindustry purity standards and fit perfectly inHACCP (Hazard Analysis and Critical ControlPoint) and GMP (Good Manufacturing Practice)plans. They are H1 and 3H registered by NSFand n, n3, and u1 registered by the CanadianFood Inspection Agency.
Features and Benefits
• Low volatility
• Minimizes consumption
• Includes an oxidation inhibitor for stability
• Extended shelf life
• Odourless and tasteless
• Rapidly separates from water
• Excellent low pour characteristics
• Good fluidity at low temperatures
• Water white in colour, does not stain
• Fully approved for use in and around food
processing areas
• H1 registered by NSF as a lubricant withincidental food contact for use in andaround food processing areas
• 3H registered by NSF for use as a releaseagent on hard surfaces to prevent foodfrom adhering during processing
• Registered n, n3, and u1 by theCanadian Food Inspection Agency (CFIA)
• Certified Kosher and Pareve by Star K
• Certified Halal by IFANCA
• Meets United States Food and DrugAdministration (FDA) regulations:
• CFR 21, Section 172.878 - White Mineral Oil
• CFR 21, Section 178.3620 (a) - White Mineral Oil
• CFR 21, Section 178.3570 -Lubricants with Incidental FoodContact
• CFR 21, Section 176.170 -Components of paper and paperboardin contact with aqueous and fattyfoods
• PURITY FG WO 35, 68 and 90 meet
mineral oils, USP (United States
Pharmacopoeia standards)
• PURITY FG WO 15 meets Light Mineral
Oil, NF (National Formulary)
• PURITY FG WO 15 is approved by the
United States Department of Agriculture
(USDA) for use as a protecting oil on
Shell Eggs processed in plants operating
under the USDA voluntary shell egg
grading program
• Maintains food allergy safety
• Free of gluten• Contain no peanuts, tree nuts, or their
derivatives• Manufactured in a facility that does not
manufacture, store, or otherwise handle any peanuts or tree nut product
59-111551-2 ECO 801083SHEET 2 OF 9
Applications
PURITY FG WO oils may be safely used where anapproved food grade or inert white mineral oil isrequired. General applications include direct andindirect food contact in producing, manufacturing,packing, processing, preparing, treating or packagingfood. PURITY FG WO oils may also be used incosmetics, pharmaceutical plastics and chemicalprocessing and textile production.
Specific applications include:
• Rust and corrosion prevention for knives andcutting tables used in food preparation
• Coatings for fruits and vegetables
• Carrier and release agent for pharmaceuticalcapsules
• Release agents for molds and bakery pans
• Plasticizers
• Moisture resistant coatings on food packaging
• Dust suppressants
• Cleaning agent for stainless steel
• Shell egg protecting oil to retain freshness (15grade only)
The values quoted above are typical of normal production. They do not constitute a specification.
If you would like to know more about Petro-Canada’sPURITY FG WO White Mineral oils, or any other productin our complete line of quality lubricants, please contactus at:
59-111551-2 ECO 801083SHEET 3 OF 9
paulm
Rectangle
PURITYTM FG WO WHITE MINERAL OIL 15, 35, 68, 90PFWO15, 491-030; PFWO35, 491-031; PFGWO68, 491-029; PFWO90, 491-033Purity FG WO White Mineral Oil 15, 35, 68, 90 are highly refined white mineral oils intendedfor the food processing industry.
NSF 3H and H1 Registered.
This product complies with FDA 21 CFR 172.878 "White Mineral Oil" and 21 CFR178.3620(a) regulations for direct food contact."
Certified to NSF/ANSI Standard 60Function: Well Pump LubricantMaximum Use Level (MUL): 0.048 mg/L
Petro-Canada: 403-296-3000Canutec Transportation:613-996-6666Poison Control Centre: Consult local telephone directory for emergency number(s).
Repeated skin exposure can produce local skin destruction or dermatitis. Repeated orprolonged contact with spray or mist may produce chronic eye irritation and severe skinirritation.
:
Odor : Mild petroleum oil like.OSHA/HCS status : While this material is not considered hazardous by the OSHA Hazard Communication
Standard (29 CFR 1910.1200), this MSDS contains valuable information critical to thesafe handling and proper use of the product. This MSDS should be retained andavailable for employees and other users of this product.
2 .
White mineral oil 8042-47-5 100
Composition/information on ingredientsName CAS number %
3 .
Page: 1/6Continued on Next Page Internet: lubricants.petro-canada.ca/msds
59-111551-2 ECO 801083SHEET 4 OF 9
PURITYTM FG WO WHITE MINERAL OIL 15, 35, 68, 90 Page Number: 2
Do not induce vomiting unless directed to do so by medical personnel. Never giveanything by mouth to an unconscious person. If potentially dangerous quantities of thismaterial have been swallowed, call a physician immediately.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes.Get medical attention if irritation occurs.Wash skin thoroughly with soap and water or use recognized skin cleanser. Get medicalattention if irritation occurs. Remove contaminated clothing and shoes. Wash clothingbefore reuse. Clean shoes thoroughly before reuse.If inhaled, remove to fresh air. If breathing is difficult, give oxygen. If not breathing, giveartificial respiration. Get medical attention.
First aid measuresEye contact
Skin contact
Inhalation
Ingestion
:
:
:
:
4 .
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training.
May be combustible at high temperature.Carbon oxides (CO, CO2), smoke and irritating vapours as products of incompletecombustion.
Use an extinguishing agent suitable for the surrounding fire.
Low fire hazard. This material must be heated before ignition will occur.
Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat orsources of ignition.
Fire-fighting measuresFlammability of the productProducts of combustion
Extinguishing media
Special remarks on firehazardsSpecial remarks onexplosion hazards
No specific hazard.Special protectiveequipment for fire-fighters
Fire-fighters should wear appropriate protective equipment and self-contained breathingapparatus (SCBA) with a full face-piece operated in positive pressure mode.
If emergency personnel are unavailable, contain spilled material. For small spills, addabsorbent (soil may be used in the absence of other suitable materials), scoop upmaterial and place in a sealable, liquid-proof container for disposal. For large spills, dikespilled material or otherwise contain it to ensure runoff does not reach a waterway. Placespilled material in an appropriate container for disposal.
Environmental precautions
Accidental release measures
: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drainsand sewers.
Personal precautions :
Methods for cleaning up :
6 .
Keep container tightly closed. Store away from incompatible materials (see section 10).Keep container in a cool, well-ventilated area.
Keep away from heat. Keep away from sources of ignition. Empty containers pose a firerisk. Evaporate the residue under a fume hood. Ground all equipment containingmaterial. Do not ingest. Do not breathe gas/fumes/vapor/spray. Wear suitable protectiveclothing. If ingested, seek medical advice immediately and show the container or thelabel. Keep away from incompatibles.
Handling and storageHandling
Storage
:
:
7 .
White mineral oil ACGIH TLV (United States). Notes: (oil mist)TWA: 5 mg/m³ 8 hour(s).STEL: 10 mg/m³ 15 minute(s).
Exposure controls/personal protectionProduct name Exposure limits
Consult local authorities for acceptable exposure limits.
8 .
Page: 2/6Continued on Next Page Internet: lubricants.petro-canada.ca/msds
59-111551-2 ECO 801083SHEET 5 OF 9
PURITYTM FG WO WHITE MINERAL OIL 15, 35, 68, 90 Page Number: 3
Exposure controls/personal protection8 .
Use a properly fitted, air-purifying or air-fed respirator complying with an approvedstandard if a risk assessment indicates this is necessary. Respirator selection must bebased on known or anticipated exposure levels, the hazards of the product and the safeworking limits of the selected respirator.Recommended: organic vapor filter
Safety eyewear complying with an approved standard should be used when a riskassessment indicates this is necessary to avoid exposure to liquid splashes, mists,gases or dusts.
Personal protective equipment for the body should be selected based on the task beingperformed and the risks involved and should be approved by a specialist before handlingthis product.
Personal protectionEyes
Skin
Respiratory
:
:
:
Chemical-resistant, impervious gloves complying with an approved standard should beworn at all times when handling chemical products if a risk assessment indicates this isnecessary.Recommended: neoprene, nitrile, polyvinyl alcohol (PVA), Viton.
Hands :
Engineering measures : No special ventilation requirements. Good general ventilation should be sufficient tocontrol worker exposure to airborne contaminants. If this product contains ingredientswith exposure limits, use process enclosures, local exhaust ventilation or otherengineering controls to keep worker exposure below any recommended or statutorylimits.
Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, beforeeating, smoking and using the lavatory and at the end of the working period. Appropriatetechniques should be used to remove potentially contaminated clothing. Washcontaminated clothing before reusing. Ensure that eyewash stations and safety showersare close to the workstation location.
Page: 3/6Continued on Next Page Internet: lubricants.petro-canada.ca/msds
59-111551-2 ECO 801083SHEET 6 OF 9
PURITYTM FG WO WHITE MINERAL OIL 15, 35, 68, 90 Page Number: 4
Physical and chemical properties9 .Not available.Physical/chemical
properties comments:
The product is stable.
Will not occur.
May release COx, smoke and irritating vapours when heated to decomposition.
Not available.
Stability and reactivityStability and reactivityConditions of instability
Incompatibility with varioussubstancesHazardous decompositionproducts
Hazardous polymerization
::
:
:
:
10 .
Reactive with oxidizing agents.
Toxicological information
Specific effectsCarcinogenic effects Not listed as carcinogenic by OSHA, NTP or IARC.Mutagenic effects No known significant effects or critical hazards.Teratogenicity /Reproductive toxicity
No known significant effects or critical hazards.
Toxicity dataProduct/ingredient nameWhite mineral oil LD50
LD50LC50
>5000 mg/kg>2000 mg/kg>2500 mg/m³ (4hours)
OralDermalInhalation
RatRabbitRat
Test Result Route Species
:::
11 .
SensitizationIngestion No known significant effects or critical hazards.Inhalation No known significant effects or critical hazards.Eyes Slightly irritating to the eyes.
:::
Skin : Slightly irritating to the skin.Synergistic products : Not available.
Not available.
Not available.
Ecological information
BOD and CODBiodegradable/OECD
Special remarks on theproducts of biodegradation
Not available.Not available.
Mobility
Ecotoxicity dataSpecies Period ResultProduct/ingredient name
Environmental precautions : No known significant effects or critical hazards.Bioconcentration factor Not available.
12 .
Disposal considerationsDisposal should be in accordance with applicable regional, national and local laws and regulations. Localregulations may be more stringent than regional or national requirements.
The information presented below only applies to the material as supplied. The identification based oncharacteristic(s) or listing may not apply if the material has been used or otherwise contaminated. It is theresponsibility of the waste generator to determine the toxicity and physical properties of the material generated todetermine the proper waste identification and disposal methods in compliance with applicable regulations.
13 .
Page: 4/6Continued on Next Page Internet: lubricants.petro-canada.ca/msds
59-111551-2 ECO 801083SHEET 7 OF 9
PURITYTM FG WO WHITE MINERAL OIL 15, 35, 68, 90 Page Number: 5
Disposal considerations13 .
The generation of waste should be avoided or minimized wherever possible. Avoiddispersal of spilled material and runoff and contact with soil, waterways, drains andsewers. Dispose of surplus and non-recyclable products via a licensed waste disposalcontractor. Disposal of this product, solutions and any by-products should at all timescomply with the requirements of environmental protection and waste disposal legislationand any regional local authority requirements.
Waste disposal
Refer to Section 7: HANDLING AND STORAGE and Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTIONfor additional handling information and protection of employees.
:
Transport information
Notavailable.
-DOT Classification
TDG Classification -
Not available. -
Notregulated.
- -
Regulatoryinformation
UN number Proper shippingname
Class PG* Label Additionalinformation
Not available.
-
14 .
PG* : Packing group
Not regulated.HCS Classification
Regulatory information
WHMIS (Canada) Not controlled under WHMIS (Canada).
International regulations
:
:Canada
United States
This product is not classified according to EU legislation.Risk phrasesEU regulations
:
15 .
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations andthe MSDS contains all the information required by the Controlled Products Regulations.
AUSTRALIAN INVENTORY (AICS) ListedListedCANADA INVENTORY (DSL)
CHINA INVENTORY (IECS) ListedListedEC INVENTORY (EINECS/ELINCS)
JAPAN INVENTORY (ENCS) ListedListedKOREA INVENTORY (ECL)
Other informationHazardous MaterialInformation System (U.S.A.)
1
1
1
B
01
1
National Fire ProtectionAssociation (U.S.A.)
Health
Special
Instability
Flammability
Health
Fire hazard
Reactivity
Personal protection
:
:
16 .
Page: 5/6Continued on Next Page Internet: lubricants.petro-canada.ca/msds
59-111551-2 ECO 801083SHEET 8 OF 9
PURITYTM FG WO WHITE MINERAL OIL 15, 35, 68, 90 Page Number: 6
Other information16 .Available upon request.TM/MC Marque de commerce de Petro-Canada - Trademark
References
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-namedsupplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of theinformation contained herein.Final determination of suitability of any material is the sole responsibility of the user. All materials may presentunknown hazards and should be used with caution. Although certain hazards are described herein, we cannotguarantee that these are the only hazards that exist.