FF II Module A Jeopardy. Round 1 HeatMatterFireExtinguishersPPE 10 20 30 40 50 Round 2.

FF II Module A Jeopardy

Round 1

Heat Matter Fire Extinguishers PPE

10 10 10 10 10

20 20 20 20 20

30 30 30 30 30

40 40 40 40 40

50 50 50 50 50

Round 2

Heat – 10 points

• Heating of an organic substance without addition of external heat

• Spontaneous Heating

Next Question

Heat – 20 points

• Heat generated by passing current through a conductor such as a wire, or appliance is– Dielectric Heating– Leakage Current Heating– Resistance Heating– Heat from Arcing

• Resistance Heating

Next Question

Heat – 30 points

• What is often blamed for fires when flammable liquids are transferred between containers that are not properly electrically bonded together

• Flammable Liquids

Next Question

Heat – 40 points

• What are the three methods of heat transfer, and provide an example of each

• Conduction, Convection, Radiation

Next Question

Heat – 50 points

• Of the following choices, which is the best heat conductor– Metal– Fiberglass– Gasses– Liquids

• Metal

Next Question

Matter – 10 points

• Fuel can be found in what states of matter?

• Solid, Liquid and Gas

Next Question

Matter – 20 points

• Which form of matter will burn

• Gasses

Next Question

Matter – 30 points

• Process of creating gasses from a solid is called ______. Process of creating gasses from a liquid is called ________.

• Pyrolosis and Vaporization

Next Question

Matter – 40 points

• What two characteristics of a solid will influence the rate of fire spread

• Surface to mass ratio and vertical positioning

Next Question

Matter – 50 points

• State the law of conservation of of mass

• Mass and energy may be converted from one to another, but there is never any net loss of total mass energy

Next Question

Fire – 10 points

• List the components of the fire triangle

• Heat, Fuel and Oxygen

Next Question

Fire – 20 points

• List the parts of the fire tetrahedron

• Fuel, Heat, Oxygen, Uninhibited Chemical Chain Reaction

Next Question

Fire – 30 points

• List, and define 3 of the phases of fire

• Incipient, Free Burning, Hot Smoldering, Roll Over, Flashover

Next Question

Fire – 40 points

• List 3 characteristics of a potential backdraft

• Puffing Smoke, minimal flame, dense gray yellow smoke, “moaning” sounds coming from the building, smoke stained windows

Next Question

Fire – 50 points

• Define thermal layering and its impact on interior fire attack

• Layers of heat in a building, hottest at the top. Can become upset by improper water application and improper ventilation

Next Question

Extinguishers – 10 points

• Provide 2 examples of class A fire and 2 examples of a class B fire

• A = Normal Combustable (Ash), B = Flammable Liquids (Boiling)

Next Question

Extinguishers – 20 points

• Water extinguishers are designed to eliminate what part of the fire tetrahedron

• Heat – Note: foam is often added to help break surface tension of water to help it penetrate better.

Next Question

Extinguishers – 30 points

• According to the Fire Tetrahedron, what is the most effective method for extinguishing a Class B fire?

• Excluding the Oxygen

Next Question

Extinguishers – 40 points

• What is the safest way to handle a Class C fire

• Deenergize the source and treat as a class A or B

Next Question

Extinguishers – 50 points

• What class of fire extinguisher is rated based on effectiveness when used by a non expert?

• Class B

Next Question

PPE – 10 points

• Which of the following is NOT part of your turnout gear– Helmet– Turnout coat and bunker pants– Pocket spanner wrench– SCBA

• Pocket spanner wrench

Next Question

PPE – 20 points

• You are part of an interior attack team and your face shield begins to melt. What does that mean to you?

• Very hot, Very dangerous. They will melt between 250 and 300 degrees

Next Question

PPE – 30 points

• Turn out coats are made of how many layers?

• 3 as required by NFPA 1971– An outer shell– Moisture barrier– Thermal barrier

Next Question

PPE – 40 points

• Is there any safety difference between a dirty turnout coat and a clean turnout coat?

• Dirt absorbs heat faster than the turnout coat subjecting the wearer to higher heat conditions.

Next Question

PPE – 50 points

• Reflective trim should be positioned where on turnout coat, and how wide should it be?

• Should encircle the sleeves and hem of the coat and should be 2 inches wide.

Next Question

Round 2

Extinguishers SCBA Ladders Hose More Hose

20 20 20 20 20

40 40 40 40 40

60 60 60 60 60

80 80 80 80 80

100 100 100 100 100

Final Jeopardy

Extinguishers – 20 points

• What set of letters is used to help people remember how to use an extinguisher, and what does each letter mean?

• P- pull, A- Aim, S- Squeeze, S- Sweep

Next Question

Extinguishers – 40 points

• What are the shapes and colors for ABC and D fire extinguishers

• A- Green Triangle, B – Red Box, C – Blue Circle, D – Yellow star

Next Question

Extinguishers– 60 points

• What type of extinguisher might you use on computer equipment

• Halon or CO2

Next Question

Extinguishers– 80 points

• When using an extinguisher, where should the stream be directed

• At the base of the flames

Next Question

Extinguishers– 100 points

• What is the difference between dry chemical extinguishers and dry power extinguishers

• Dry chemical ABC or BC, Dry Power D only

Next Question

SCBA – 20 points

• Open Circuit and Closed Circuit are the two different types of SCBA’s. What is the major difference, and which is used more if fire service?

• Differences– Closed – compressed or liquid oxygen (also rebreather)

– Open – compressed air

– Open is used more often

Next Question

SCBA – 40 points

• What is the benefit of a positive pressure SCBA?

• Positive pressure prevents contaminants from entering facepieces if a leak develops

Next Question

SCBA – 60 points

• List three ways to prevent/correct internal fogging of your SCBA mask

• Nosecup, anti-fog chemical, briefly turn on the bypass valve

Next Question

SCBA – 80 points

• Your low pressure bell begins to ring, how much air do you have left in your tank?

• 500 psi

Next Question

SCBA – 100 points

• The cylinder gauge and regulator gauge should be within how many psi of each other

• 100psi

Next Question

Ladders – 20 points

• How many rungs of a ladder should extend beyond the edge of the roof?

• 5

Next Question

Ladder – 40 points

• When lifting a ladder from the ground, which fire fighter gives the command to lift?

• Firefighter at the rear (butt, heel) of the ladder is in control

Next Question

Ladder – 60 points

• The optimum angle for ladder placement is

• 75 ½ degrees

Next Question

Ladder – 80 points

• 20 feet of a 25 foot ladder is used to reach a window. How far away from the building should the ladder be placed?

• 5 feet (length used / 4)

Next Question

Ladder – 100 points

• Where should the fly section of a ladder be placed?

• For all ladders except wooden… the fly goes away from the building.

Next Question

Hose – 20 points

• List 3 of the 4 types of hose dammage and provide an example of each type

• Types are– Mechanical– Thermal– Organic– Chemical

Next Question

Hose – 40 points

• To prevent cars from running over fire hose, you should use

• Hose bridges

Next Question

Hose – 60 points

• Your fire hose has been exposed to a 10% solution of nitric acid. What is the best way to clean the hose?

• Scrub brush with a solution of sodium bicarbonate (baking soda) and water

Next Question

Hose – 80 points

• What type of hose must be thoroughly dried before reloading on the apparatus?

• Woven jacket

Next Question

Hose – 100 points

• In the fire service, the 2 most commonly used hose couplings are….

• Threaded and Storz

Next Question

More Hose – 20 points

• True of False…The rubber liner of a lined woven jacket hose should be completely dry before reloading onto the apparatus. Why?

• False. The liner should remain moist to prevent it from drying out and cracking.

Next Question

More Hose – 40 points

• The part of the coupling that attaches to the host is called the….

• Shank

Next Question

More Hose – 60 points

• What is the purpose of the higbee cut and how can you locate it easily?

• Higbee cut prevents cross threading, and can be located by looking for the higbee indicator on the lugs.

Next Question

More Hose – 80 points

• What is the difference between a Wye and a Siamese?

• Wye – 1( F ) into 2 ( M ), Siamese 2 (M ) into 1 ( F )

Next Question

More Hose – 100 points

• What is the difference between a hose appliance and a hose tool?

• Hose tools don’t have water flowing through them

Next Question

Final Jeopardy

Write down the amount you wish to wager on this question

Final Jeopardy

• What is a dutchman and why are they used?

• A fold in a hose load that allows the coupling to come straight off the truck reducing the chance for tangling.