Fertilizing Plant Material Maintenance. Fertilizing Essential elements Nutrient deficiency symptoms Fertilizer forms Interpreting labels Application techniques.

Fertilizing

Plant Material Maintenance

Fertilizing

Essential elements Nutrient deficiency symptoms Fertilizer forms Interpreting labels Application techniques

17 Essential Elements (Nutrients) for Woody Plant Growth

Elements Derived From Air and Water Carbon (C) Oxygen (O) Hydrogen (H)

Soil - Macronutrients

Nitrogen (N) Phosphorous (P) Potassium (K) Calcium (Ca) Magnesium (Mg) Sulfur (S)

Soil - Micronutrients Boron (B) Chlorine (Cl) Copper (Cu) Iron (Fe) Manganese (Mn) Molybdenum (Mo) Nickel (Ni) Zinc (Zn)

Nutrient Deficiencies

Lack of either macro or micro nutrients will impede normal plant growth. Not enough in the soil In the soil, but unavailable

Symptoms will appear on different parts of the plant. Interpret these symptoms.

Some common nutrient deficiencies and the symptoms:

Nitrogen deficiency

Older leaves (bottom of plant) begin to yellow. Remainder of plant generally a lighter green than normal.Nitrogen is mobile in the plant and can be

translocated to new, young leaves.Nitrogen can be mobile in the soil.

Phosphorous deficiency

Leaves often dark green. Veins, petioles, and lower surfaces may

become reddish – purple colored. Sparse, distorted foliage.

Phosphorous is mobile in plants.Phosphorous is immobile in the soil.

Potassium deficiency

Marginal and interveinal chlorosis followed by scorching moving inward between the main veins.

Leaf curlingPotassium is highly mobile in plants.Potassium is immobile in the soil.

Iron deficiency

Interveinal Chlorosis: Veins stay green, but area between veins turns yellow.

Common on pin oak, red maple and river birch. Due to high pH soil. Common problem in Iowa, especially on trees planted

where original topsoil has been removed. (New subdivisions)

Iron cannot be translocated.

Organic Fertilizer

Organic fertilizer Derived from plant and animal products.

Blood meal, bone meal, manure & sewage sludge. Organic fert. released slowly – avoids plants from

being burned. Generally more expensive than chemical fert. on the

basis of amount of nutrients supplied. Organic fert can work as a soil amendment at the

same time. Ex. Milorganite

Inorganic Fertilizer

Manufactured chemical fertilizer. Much more concentrated than organic.

Can burn plants with too much fert, especially if using a fast release form.

Less expensive.

Carbon (C) : Nitrogen (N) Ratio

The ratio of carbon atoms to nitrogen atoms.

Soil microorganisms use nitrogen to metabolize (breakdown) carbon.

Certain types of organic matter are very high in carbon:

Sample C:N of various types of organic matter:

Sandy loam (fine) 7:1Humus 10:1

Food scraps 15:1Alfalfa hay 18:1

Grass clippings 19:1Rotted manure 20:1

Sandy loam (coarse) 25:1Vegetable trimmings 25:1

Oak leaves 26:1Leaves, varies from 35:1 to 85:1

Peat moss 58:1Corn stalks 60:1

Straw 80:1Pine needles 60:1 to 110:1Farm manure 90:1Alder sawdust 134:1

Sawdust weathered 3 years 142:1Newspaper 170:1

Douglas fir bark 491:1Sawdust weathered 2 months 625:1

Nitrogen Robbing

Organic matter with excess C:N ratios (or excessive amounts of organic matter) can create problems.

To continue decomposition the soil microorganisms will draw nitrogen out of the soil making it unavailable to plants.

Fertilizer Forms

Liquids Easy application (tank mix or hose end sprayer). Potential to burn plants if mixed too strong, or too

much applied. Soluble Powder

Dissolves readily in water (apply just like liquid). Generally less expensive than liquid.

Fertilizer Forms

GranularMost common and widely used form.Slow release forms available.

Prolongs release of nutrients Decreases burning potential

Fertilizer Labels

AnalysisShows type of nutrients and amount.

Nitrogen – Phosphate – Potash N-P-K10-5-5

Gives the percentage of each in the fertilizer. 10% Nitrogen, 5% Phosphate, 5% Potash Use conversion factors to find % phosphorous and

potassium.

Conversion Factors

To convert phosphate to phosphorous (P):Multiply %phosphate by .44

To convert potash to potassium (K):Multiply %potash by .83

Osmocote fertilizer label

What’s the analysis of the fertilizer? 19-5-8

What percentage of the fertilizer is N?19%

What percentage of the fertilizer is phosphate (P2O5)?5%

What percentage of the fertilizer is potash (K2O)?8%

What percentage of the fertilizer is actual phosphorous (P)?5 x .44 = 2.2%

What percentage of the fertilizer is actual potassium (K)?8 x .83 = 6.64%

How long is this fertilizer supposed to last at 70 degrees F.?8-9 months

Does this fertilizer contain any micronutrients?Yes

How many forms of N are in the fertilizer? 3

6.60% Ammoniacal Nitrogen5.70% Nitrate Nitrogen6.70% Urea Nitrogen

Application Methods

Broadcast on the soil surface Most soils supply adequate amounts of nutrients with the exception of N. Effective method for applying N.

Placed in holes in the soil P, K and other nutrients of low solubility benefit from incorporation. Core, punch, or drill holes. 6 inches deep, 2-3 feet apart.

Application methods continued

Injected into the soil under pressure High pressure hydraulic sprayer. 6 inches deep. 150-200 psi pressure.

Sprayed on foliage Placed in holes in tree trunks

Micronutrient implants. Placed in xylem. Holes approx. ½ inch in diameter. Plug holes.

Injected into the trunk Micronutrients. Mauget, Wedgle.

Broadcast Application of Fertilizer

Fertilizer Application in Holes

Injecting Fertilizer into the Soil150-200 psi

Foliar Fertilizer Spray

Misting sprayer suitable for foliar feeding

Systemic Tree Implants

Microinjection:How to use Mauget

Microinjection:Wedgle direct inject system

Macroinjection

Fertilizer Math

Remember that a 20 -10 -10 fertilizer, for example, contains only 20% actual N on a weight basis. A useful calculation for determining how many pounds of fertilizer to apply is:

pounds of fertilizer = application rate of the nutrient in pounds

percentage of that nutrient in the analysis

If you want to apply nitrogen at the rate of 2 pounds per 1,000 square feet to an area measuring 300 square feet how many pounds of 20 – 10 – 10 fertilizer should be applied:

pounds of fertilizer = application rate of the nutrient in pounds

percentage of that nutrient in the analysis

pounds of fertilizer = 2 = 10 pounds of fertilizer

.20

10 = x

1,000 300

x = 3 pounds

The End