Ferrite for Switching Power Supplies · (1/28) 001-01 / 20110420 / e142.fm • All specifications are subject to change without notice. Ferrite for Switching Power Supplies Planar

• All specifications are subject to change without notice.• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific

bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.

EL/ELT/PQI/EIR/ER/EI series

Ferrite for Switching Power Supplies

Planar cores

Issue date: April 2011

(1/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

Ferrite for Switching Power SuppliesPlanar Cores

EL11X4 to EL25X8.6ELT11X3 to ELT25X8.6PQI16/7.8 to PQI26/12EIR14/4.5/9 to EIR22/5.5/15ER9.5/5 to ER25/5.5/18EI14/5/5 to EI22/8/16

Ordering Code SystemPC95 EL 11X4 – A125

MaterialSize of EL core

AL-value(Z: without air gap)

(2/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

EL CORES

∗ AL-value: 1kHz, 0.5mA, 100Ts

Part No.(ELH+ELH)Dimensions in mmA B C D E F1 F2 R2

PC95EL11X4-Z11.00±0.20 2.01±0.10 8.80±0.20 1.00±0.10 9.17±0.20 2.78±0.10 6.40±0.15 0.30

PC90EL11X4-ZPC95EL13X4.4-Z

13.00±0.25 2.19±0.10 10.40±0.20 1.00±0.10 10.83±0.20 3.29±0.10 7.56±0.15 0.30PC90EL13X4.4-ZPC95EL15.5X5.8-Z

15.50±0.30 2.92±0.10 12.40±0.25 1.50±0.10 12.92±0.25 3.92±0.10 9.01±0.20 0.30PC90EL15.5X5.8-ZPC95EL18X7.3-Z

18.00±0.30 3.65±0.10 14.40±0.25 2.00±0.10 15.00±0.30 4.55±0.10 10.47±0.20 0.30PC90EL18X7.3-ZPC95EL20X7.7-Z

20.00±0.35 3.83±0.10 16.00±0.30 2.00±0.10 16.67±0.30 5.06±0.15 11.63±0.20 0.50PC90EL20X7.7-ZPC95EL22X8-Z

22.00±0.40 4.02±0.10 17.60±0.30 2.00±0.10 18.33±0.35 5.56±0.15 12.79±0.25 0.50PC90EL22X8-ZPC95EL25X8.6-Z

25.00±0.45 4.29±0.10 20.00±0.35 2.00±0.10 20.83±0.35 6.32±0.15 14.54±0.25 0.50PC90EL25X8.6-Z

Part No. (ELH+ELH)Effective parameter Electrical characteristicsC1

(mm–1)e

(mm)Ae(mm2)

Ve(mm3)

Amin.(mm2)

Acw(mm2)

Weight(g)

AL-value (nH/N2)∗

Without air gap With air gapPC95EL11X4-Z

0.826 13.7 16.5 226 15.9 6.39 1.32400±25% 50±3%

80±5%125±7%PC90EL11X4-Z 1950±25%

PC95EL13X4.4-Z0.667 15.4 23.1 357 22.4 7.54 2.0

3160±25% 63±3%100±5%160±7%PC90EL13X4.4-Z 2500±25%

PC95EL15.5X5.8-Z0.597 19.6 32.9 646 31.9 13.5 3.5

3680±25% 63±3%100±3%160±5%PC90EL15.5X5.8-Z 3000±25%

PC95EL18X7.3-Z0.538 23.8 44.3 1050 43.0 20.9 6.0

4760±25% 80±3%125±3%200±5%PC90EL18X7.3-Z 3600±25%

PC95EL20X7.7-Z0.469 25.6 54.6 1400 52.9 23.2 7.8

5630±25% 80±3%125±3%200±5%PC90EL20X7.7-Z 4050±25%

PC95EL22X8-Z0.413 27.3 66.2 1810 64.2 25.5 10

6540±25% 100±3%160±3%250±5%PC90EL22X8-Z 5050±25%

PC95EL25X8.6-Z0.350 30.0 85.6 2570 83.0 29.0 15

7540±25% 100±3%160±3%250±5%PC90EL25X8.6-Z 5700±25%

CBD

F2

F1

E

A

R2: 8 places R1=F1/2

ELH core

(3/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ELT CORES

∗ AL-value: 1kHz, 0.5mA, 100Ts

Part No.(ELH+PLT)Dimensions in mmA B1 B2 C D E F1 F2 R2

PC95ELT11X3-Z11.00±0.20 2.01±0.10 1.01±0.05 8.80±0.20 1.00±0.10 9.17±0.20 2.78±0.10 6.40±0.15 0.30

PC90ELT11X3-ZPC95ELT11X4-Z

11.00±0.20 3.01±0.10 1.01±0.05 8.80±0.20 2.00±0.10 9.17±0.20 2.78±0.10 6.40±0.15 0.30PC90ELT11X4-ZPC95ELT13X3.4-Z

13.00±0.25 2.19±0.10 1.19±0.05 10.40±0.20 1.00±0.10 10.83±0.20 3.29±0.10 7.56±0.15 0.30PC90ELT13X3.4-ZPC95ELT13X4.4-Z

13.00±0.25 3.19±0.10 1.19±0.05 10.40±0.20 2.00±0.10 10.83±0.20 3.29±0.10 7.56±0.15 0.30PC90ELT13X4.4-ZPC95ELT15.5X4.3-Z

15.50±0.30 2.92±0.10 1.42±0.10 12.40±0.25 1.50±0.10 12.92±0.25 3.92±0.10 9.01±0.20 0.30PC90ELT15.5X4.3-ZPC95ELT15.5X5.8-Z

15.50±0.30 4.42±0.10 1.42±0.10 12.40±0.25 3.00±0.10 12.92±0.25 3.92±0.10 9.01±0.20 0.30PC90ELT15.5X5.8-ZPC95ELT18X5.3-Z

18.00±0.30 3.65±0.10 1.65±0.10 14.40±0.25 2.00±0.10 15.00±0.30 4.55±0.10 10.47±0.20 0.30PC90ELT18X5.3-Z

Part No. (ELH+PLT)Effective parameter Electrical characteristicsC1

(mm–1)e

(mm)Ae(mm2)

Ve(mm3)

Amin.(mm2)

Acw(mm2)

Weight(g)

AL-value (nH/N2)∗

Without air gap With air gapPC95ELT11X3-Z

0.702 11.7 16.6 194 15.9 3.20 1.12590±25% 50±3%

80±5%125±7%PC90ELT11X3-Z 1750±25%

PC95ELT11X4-Z0.826 13.7 16.5 226 15.9 6.39 1.3

2400±25% 50±3%80±5%125±7%PC90ELT11X4-Z 1700±25%

PC95ELT13X3.4-Z0.578 13.4 23.2 312 22.4 3.77 1.8

3390±25% 63±3%100±5%160±7%PC90ELT13X3.4-Z 2400±25%

PC95ELT13X4.4-Z0.667 15.4 23.1 357 22.4 7.54 2.0

3160±25% 63±3%100±5%160±7%PC90ELT13X4.4-Z 2300±25%

PC95ELT15.5X4.3-Z0.503 16.6 33.1 550 31.9 6.75 3.0

4340±25% 63±3%100±3%160±5%PC90ELT15.5X4.3-Z 2900±25%

PC95ELT15.5X5.8-Z0.597 19.6 32.9 646 31.9 13.5 3.5

3680±25% 63±3%100±3%160±5%PC90ELT15.5X5.8-Z 2200±25%

PC95ELT18X5.3-Z0.446 19.8 44.5 882 43.0 10.5 5.0

5330±25% 80±3%125±3%200±5%PC90ELT18X5.3-Z 3500±25%

CB2

A

CB1

D F2

F1 E A

R1=

F1/

2

R2: 8 places

ELH core PLT core

(4/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ELT CORES

∗ AL-value: 1kHz, 0.5mA, 100Ts

Part No.(ELH+PLT)Dimensions in mmA B1 B2 C D E F1 F2 R2

PC95ELT18X7.3-Z18.00±0.30 5.65±0.10 1.65±0.10 14.40±0.25 4.00±0.15 15.00±0.30 4.55±0.10 10.47±0.20 0.30

PC90ELT18X7.3-ZPC95ELT20X5.7-Z

20.00±0.35 3.83±0.10 1.83±0.10 16.00±0.30 2.00±0.10 16.67±0.30 5.06±0.15 11.63±0.20 0.50PC90ELT20X5.7-ZPC95ELT20X7.7-Z

20.00±0.35 5.83±0.15 1.83±0.10 16.00±0.30 4.00±0.15 16.67±0.30 5.06±0.15 11.63±0.20 0.50PC90ELT20X7.7-ZPC95ELT22X6-Z

22.00±0.40 4.02±0.10 2.02±0.10 17.60±0.30 2.00±0.10 18.33±0.35 5.56±0.15 12.79±0.25 0.50PC90ELT22X6-ZPC95ELT22X8-Z

22.00±0.40 6.02±0.15 2.02±0.10 17.60±0.30 4.00±0.15 18.33±0.35 5.56±0.15 12.79±0.25 0.50PC90ELT22X8-ZPC95ELT25X6.6-Z

25.00±0.45 4.29±0.10 2.29±0.10 20.00±0.35 2.00±0.10 20.83±0.35 6.32±0.15 14.54±0.25 0.50PC90ELT25X6.6-ZPC95ELT25X8.6-Z

25.00±0.45 6.29±0.15 2.29±0.10 20.00±0.35 4.00±0.15 20.83±0.35 6.32±0.15 14.54±0.25 0.50PC90ELT25X8.6-Z

Part No. (ELH+PLT)Effective parameter Electrical characteristicsC1

(mm–1)e

(mm)Ae(mm2)

Ve(mm3)

Amin.(mm2)

Acw(mm2)

Weight(g)

AL-value (nH/N2)∗

Without air gap With air gapPC95ELT18X7.3-Z

0.538 23.8 44.3 1050 43.0 20.9 6.04760±25% 80±3%

125±3%200±5%PC90ELT18X7.3-Z 3100±25%

PC95ELT20X5.7-Z0.393 21.6 54.9 1180 52.9 11.6 6.7

6270±25% 80±3%125±3%200±5%PC90ELT20X5.7-Z 4150±25%

PC95ELT20X7.7-Z0.469 25.6 54.6 1400 52.9 23.2 7.8

5630±25% 80±3%125±3%200±5%PC90ELT20X7.7-Z 3900±25%

PC95ELT22X6-Z0.351 23.4 66.6 1560 64.2 12.8 9.0

7250±25% 100±3%160±3%250±5%PC90ELT22X6-Z 4800±25%

PC95ELT22X8-Z0.413 27.3 66.2 1810 64.2 25.5 10

6540±25% 100±3%160±3%250±5%PC90ELT22X8-Z 4250±25%

PC95ELT25X6.6-Z0.302 26.0 86.0 2230 83.0 14.5 13

8600±25% 100±3%160±3%250±5%PC90ELT25X6.6-Z 6100±25%

PC95ELT25X8.6-Z0.350 30.0 85.6 2570 83.0 29.0 15

7540±25% 100±3%160±3%250±5%PC90ELT25X8.6-Z 5400±25%

CB2

A

CB1

D F2

F1 E A

R1=

F1/

2

R2: 8 places

ELH core PLT core

(5/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

PQI CORES

∗ AL-value: 1kHz, 0.5mA, 100Ts

Part No.(HPQ+PQD)Dimensions in mmA1 A2 B øC D E min. H I

PC95PQI16/7.8Z-1216.40±0.30 11.20±0.30 14.40±0.30 7.00±0.20 5.40±0.10 9.60 3.05±0.15 2.35±0.10

PC90PQI16/7.8Z-12PC95PQI20/9Z-12

20.50±0.40 14.00±0.40 18.00±0.40 8.80±0.20 6.00±0.10 12.00 3.05±0.15 2.95±0.10PC90PQI20/9Z-12PC95PQI26/12Z-12

26.50±0.45 19.00±0.45 22.50±0.45 12.00±0.20 7.30±0.10 15.50 3.10±0.15 4.20±0.10PC90PQI26/12Z-12

Part No. (HPQ+PQD)Effective parameter Electrical characteristicsC1

(mm–1)e

(mm)Ae(mm2)

Ve(mm3)

Amin.(mm2)

Acw(mm2)

Weight(g)

AL-value (nH/N2)∗

Without air gap With air gapPC95PQI16/7.8Z-12

0.467 19.5 41.8 815 37.6 11.3 5.04910±25% 63±3%

100±5%160±7%PC90PQI16/7.8Z-12 3600±25%

PC95PQI20/9Z-120.346 22.9 66.0 1510 59.3 14.0 9.0

7070±25% 100±3%160±5%250±7%PC90PQI20/9Z-12 5200±25%

PC95PQI26/12Z-120.224 27.7 123 3410 109 16.3 21

11950±25% 100±3%160±3%250±5%PC90PQI26/12Z-12 8600±25%

B A1

øC

E m

in.

A2 D

H

A1

E m

in.

A2 I

HPQ core PQD core

(6/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

EIR CORES

∗ AL-value: 1kHz, 0.5mA, 100Ts

Part No.(HER+PLT)Dimensions in mmA1 B C1 øD E F H A2 C2 I

PC95EIR14/4.5/9-Z13.85±0.25 3.20±0.10 9.00±0.20 5.20±0.10 11.35±0.15 1.90±0.10 1.25 14.00±0.20 9.20±0.20 1.30±0.10

PC90EIR14/4.5/9-ZPC95EIR18/5/12-Z

18.15±0.30 3.50±0.10 12.00±0.20 6.00±0.10 15.75±0.25 2.00±0.10 1.20 18.20±0.25 12.20±0.20 1.50±0.10PC90EIR18/5/12-ZPC95EIR22/5.5/15-Z

22.10±0.35 3.75±0.10 15.25±0.25 6.80±0.10 19.70±0.30 2.00±0.10 1.20 22.20±0.30 15.50±0.20 1.75±0.10PC90EIR22/5.5/15-Z

Part No. (HER+PLT)Effective parameter Electrical characteristicsC1

(mm–1)e

(mm)Ae(mm2)

Ve(mm3)

Amin.(mm2)

Acw(mm2)

Weight(g)

AL-value (nH/N2)Without air gap With air gap

PC95EIR14/4.5/9-Z0.679 15.4 22.7 349 21.2 5.84 2.0

2800±25% 63±3%100±5%160±7%PC90EIR14/4.5/9-Z 2050±25%

PC95EIR18/5/12-Z0.601 19.7 32.8 645 28.3 9.75 3.8

3690±25% 80±3%125±5%200±7%PC90EIR18/5/12-Z 2500±25%

PC95EIR22/5.5/15-Z0.505 23.2 46.1 1070 36.3 12.9 6.5

4150±25% 80±3%125±5%200±7%PC90EIR22/5.5/15-Z 3000±25%

C1B

F

øD E

HH

A1

C2 I

A2

HER core PLT core

(7/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ER CORES

∗ AL-value: 1kHz, 0.5mA, 100Ts

Part No.(HER+HER) TypeDimensions in mmA B C øD E F H

PC95ER9.5/5-Z1 9.5 2.5 5.0 3.5 7.0min. 1.6 —

PC90ER9.5/5-ZPC95ER11/5-Z

1 11.0 2.5 6.0 4.25 7.9min. 1.5 —PC90ER11/5-ZPC95ER14/4.5/9-Z

2 13.85±0.25 2.25±0.10 9.00±0.20 5.20±0.10 11.35±0.15 0.95±0.10 1.25PC90ER14/4.5/9-ZPC95ER14.5/6-Z

2 14.5±0.2 3.0 6.7±0.1 4.7±0.1 11.8±0.2 1.65±0.1 1.35PC90ER14.5/6-ZPC95ER18/5/12-Z

2 18.15±0.30 2.50±0.10 12.00±0.20 6.00±0.10 15.75±0.25 1.00±0.10 1.20PC90ER18/5/12-ZPC95ER22/5.5/15-Z

2 22.10±0.35 2.75±0.10 15.25±0.25 6.80±0.10 19.70±0.30 1.00±0.10 1.20PC90ER22/5.5/15-ZPC95ER25/5.5/18-Z

2 25.30±0.40 2.75±0.10 18.00±0.40 7.00±0.15 22.90±0.40 1.00±0.10 1.20PC90ER25/5.5/18-Z

Part No. (HER+HER)Effective parameter Electrical characteristicsC1

(mm–1)e

(mm)Ae(mm2)

Ve(mm3)

Amin.(mm2)

Acw(mm2)

Weight(g)

AL-value (nH/N2)∗

Without air gap With air gapPC95ER9.5/5-Z

1.67 14.2 8.47 120 7.6 7.07 0.71190±25% 63±5%

100±7%PC90ER9.5/5-Z 610min.PC95ER11/5-Z

1.23 14.7 11.9 174 10.3 7.44 1.11680±25% 63±5%

100±7%PC90ER11/5-Z 1300±25%PC95ER14/4.5/9-Z

0.679 15.4 22.7 349 21.2 5.84 2.02550±25% 63±3%

100±5%160±7%PC90ER14/4.5/9-Z 2100±25%

PC95ER14.5/6-Z1.08 19.0 17.6 333 17.3 8.42 2.0

1880±25% 100±5%160±7%PC90ER14.5/6-Z 1300±25%

PC95ER18/5/12-Z0.601 19.7 32.8 645 28.3 9.75 3.8

3500±25% 80±3%125±5%200±7%PC90ER18/5/12-Z 2900±25%

PC95ER22/5.5/15-Z0.505 23.2 46.1 1070 36.3 12.9 6.5

4300±25% 80±3%125±5%200±7%PC90ER22/5.5/15-Z 3200±25%

PC95ER25/5.5/18-Z0.486 26.1 53.7 1400 38.5 15.9 8.5

4400±25% 80±3%125±3%200±5%PC90ER25/5.5/18-Z 3400±25%

C2B

F B

øD E

HH

A

Type2

C2B

F B

øD E A

Type1

+0–0.3

+0–0.1

+0–0.2

+0–0.2

+0.15–0

+0–0.35

+0–0.1

+0–0.2

+0–0.25

+0.15–0

+0–0.1

(8/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

EI CORES

∗ AL-value: 1kHz, 0.5mA, 100Ts

Part No.(HE+PLT)Dimensions in mmA B C D E F H I J

PC95EI14/5/5-Z14.00±0.30 3.50±0.10 5.00±0.10 3.00±0.10 11.00±0.25 2.00±0.10 1.50 1.50±0.05 1.50

PC90EI14/5/5-ZPC95EI18/6/10-Z

18.00±0.35 4.00±0.10 10.00±0.20 4.00±0.10 14.00±0.30 2.00±0.10 2.00 2.00±0.05 2.00PC90EI18/6/10-ZPC95EI22/8/16-Z

21.80±0.40 5.70±0.10 15.80±0.30 5.00±0.10 16.80±0.40 3.20±0.10 2.50 2.50±0.05 2.50PC90EI22/8/16-Z

Part No. (HE+PLT)Effective parameter Electrical characteristicsC1

(mm–1)e

(mm)Ae(mm2)

Ve(mm3)

Amin.(mm2)

Acw(mm2)

Weight(g)

AL-value (nH/N2)∗

Without air gap With air gapPC95EI14/5/5-Z

1.11 16.7 15.0 251 15.0 8.00 1.31550±25% 63±3%

100±5%160±7%PC90EI14/5/5-Z 1200±25%

PC95EI18/6/10-Z0.507 20.3 40.0 811 40.0 10.0 4.4

4720±25% 100±3%160±3%250±5%PC90EI18/6/10-Z 3100±25%

PC95EI22/8/16-Z0.330 26.1 79.0 2060 79.0 18.9 11

8010±25% 160±3%250±3%315±3%PC90EI22/8/16-Z 5300±25%

C

EH

H

AD

B

FJ

CI

A

HE core PLT core

(9/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

EL Series　EL11X4 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90EL11X4 gapped core (Typical) PC90EL11X4 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95EL11X4 gapped core (Typical) PC95EL11X4 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90EL11X4-Z 1950±25% 0.2(100°C)PC95EL11X4-Z 2400±25% 0.2/0.18/0.2(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.826Effective magnetic path length e mm 13.7Effective cross-sectional area Ae mm2 16.5Effective core volume Ve mm3 226Cross-sectional winding area of core Acw mm2 6.39Weight (approx.) g 1.3

Dimensions in mm

8.8±

0.2

2.01

±0.1

1.0±

0.1

6.4±

0.15

2.78±0.1

9.17±0.2

11.0±0.2

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=6550.4×AL–1.000

NI40%=7446.9×AL–1.009

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=38.79×lg –0.7342

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=38.87×lg –0.7339

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=5997.9×AL–0.993

NI40%=7200.1×AL–1.014

(10/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

EL Series　EL13X4.4 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90EL13X4.4 gapped core (Typical) PC90EL13X4.4 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95EL13X4.4 gapped core (Typical) PC95EL13X4.4 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90EL13X4.4-Z 2500±25% 0.25(100°C)PC95EL13X4.4-Z 3160±25% 0.25/0.2/0.25(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.667Effective magnetic path length e mm 15.4Effective cross-sectional area Ae mm2 23.1Effective core volume Ve mm3 357Cross-sectional winding area of core Acw mm2 7.54Weight (approx.) g 2.0

Dimensions in mm

10.4

±0.2

2.19

±0.1

1.0±

0.1

7.56

±0.1

5

3.29±0.1

10.83±0.2

13.0±0.25

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=10915.6×AL–1.031

NI40%=12455.2×AL–1.040

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=52.02×lg –0.758

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=52.17×lg –0.757

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=6550.4×AL–1.000

NI40%=7446.9×AL–1.009

(11/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

EL Series　EL15.5X5.8 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90EL15.5X5.8 gapped core (Typical) PC90EL15.5X5.8 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95EL15.5X5.8 gapped core (Typical) PC95EL15.5X5.8 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90EL15.5X5.8-Z 3000±25% 0.5(100°C)PC95EL15.5X5.8-Z 3680±25% 0.5/0.45/0.5(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.597Effective magnetic path length e mm 19.6Effective cross-sectional area Ae mm2 32.9Effective core volume Ve mm3 646Cross-sectional winding area of core Acw mm2 13.5Weight (approx.) g 3.5

Dimensions in mm

12.4

±0.2

52.

92±0

.1

1.5±

0.1

9.01

±0.2

3.92±0.1

12.92±0.25

15.5±0.3

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=69.24×lg –0.774

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=12647.2×AL–0.989

NI40%=12041.0×AL–0.961

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=10782.9×AL–0.966

NI40%=10266.4×AL–0.938

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=67.92×lg –0.779

(12/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ELT Series ELT11X3 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90ELT11X3 gapped core (Typical) PC90ELT11X3 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95ELT11X3 gapped core (Typical) PC95ELT11X3 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90ELT11X3-Z 1750±25% 0.15(100°C)PC95ELT11X3-Z 2590±25% 0.14/0.12/0.14(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.702Effective magnetic path length e mm 11.7Effective cross-sectional area Ae mm2 16.6Effective core volume Ve mm3 194Cross-sectional winding area of core Acw mm2 3.20Weight (approx.) g 1.1

8.8±0.22.01±0.1

1.0±0.1 6.4±0.152.

78±0

.1

9.17

±0.2

11.0

±0.2

8.8±0.21.01±0.05

11.0

±0.2

Dimensions in mm

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1

Center pole gap

Temperature: 25˚C

AL=12.081×lg –0.6732

102

NI l

imit(

AT

)

AL-value(nH/N2)102101101

Temperature: 100˚C40%

20%

NI20%=2106.0×AL–0.9047

NI40%=2352.6×AL–0.9193

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

NI l

imit(

AT

)

AL-value(nH/N2)102101101

Temperature: 100˚C40%

20%

NI20%=2299.4×AL–0.9121

NI40%=7074.5×AL–1.0145

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1

Center pole gap

Temperature: 25˚C

AL=11.721×lg –0.6995

(13/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ELT Series ELT11X4 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90ELT11X4 gapped core (Typical) PC90ELT11X4 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95ELT11X4 gapped core (Typical) PC95ELT11X4 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90ELT11X4-Z 1700±25% 0.18(100°C)PC95ELT11X4-Z 2400±25% 0.16/0.15/0.16(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.826Effective magnetic path length e mm 13.7Effective cross-sectional area Ae mm2 16.5Effective core volume Ve mm3 226Cross-sectional winding area of core Acw mm2 6.39Weight (approx.) g 1.3

8.8±0.23.01±0.1

2.0±0.1 6.4±0.152.

78±0

.1

9.17

±0.2

11.0

±0.2

8.8±0.21.01±0.05

11.0

±0.2

Dimensions in mm

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=45.451×lg –0.6664

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=79126×AL–1.0385

NI40%=8238.4×AL–1.0638

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=6764.5×AL–1.0142

NI40%=7074.5×AL–1.0145

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=44.261×lg –0.7171

(14/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ELT Series　ELT13X3.4 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90ELT13X3.4 gapped core (Typical) PC90ELT13X3.4 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95ELT13X3.4 gapped core (Typical) PC95ELT13X3.4 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90ELT13X3.4-Z 2400±25% 0.3(100°C)PC95ELT13X3.4-Z 3390±25% 0.3/0.28/0.3(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.578Effective magnetic path length e mm 13.4Effective cross-sectional area Ae mm2 23.2Effective core volume Ve mm3 312Cross-sectional winding area of core Acw mm2 3.77Weight (approx.) g 1.8

10.4±0.22.19±0.1

1.0±0.1 7.56±0.153.

29±0

.1

10.8

3±0.

2

13.0

±0.2

510.4±0.21.19±0.05

13.0

±0.2

5

Dimensions in mm

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=77.30×lg –0.602

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=12501.9×AL–1.053

NI40%=11455.4×AL–1.015

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=6688.7×AL–0.937

NI40%=5844.7×AL–0.892

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=78.93×lg –0.596

(15/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ELT Series　ELT13X4.4 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90ELT13X4.4 gapped core (Typical) PC90ELT13X4.4 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95ELT13X4.4 gapped core (Typical) PC95ELT13X4.4 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90ELT13X4.4-Z 2300±25% 0.3(100°C)PC95ELT13X4.4-Z 3160±25% 0.3/0.28/0.3(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.667Effective magnetic path length e mm 15.4Effective cross-sectional area Ae mm2 23.1Effective core volume Ve mm3 357Cross-sectional winding area of core Acw mm2 7.54Weight (approx.) g 2.0

10.4±0.23.19±0.1

2.0±0.1 7.56±0.153.

29±0

.1

10.8

3±0.

2

13.0

±0.2

510.4±0.21.19±0.05

13.0

±0.2

5

Dimensions in mm

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=61.57×lg –0.687

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=14878.1×AL–1.080

NI40%=16164.5×AL–1.085

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=9732.8×AL–1.030

NI40%=11097.7×AL–1.048

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=62.14×lg –0.683

(16/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ELT Series　ELT15.5X4.3 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90ELT15.5X4.3 gapped core (Typical) PC90ELT15.5X4.3 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95ELT15.5X4.3 gapped core (Typical) PC95ELT15.5X4.3 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90ELT15.5X4.3-Z 2900±25% 0.5(100°C)PC95ELT15.5X4.3-Z 4340±25% 0.5/0.45/0.5(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.503Effective magnetic path length e mm 16.6Effective cross-sectional area Ae mm2 33.1Effective core volume Ve mm3 550Cross-sectional winding area of core Acw mm2 6.75Weight (approx.) g 3.0

12.4±0.252.92±0.1

1.5±0.1 9.01±0.23.

29±0

.1

12.9

2±0.

25

15.5

±0.3

12.4±0.251.42±0.1

15.5

±0.3

Dimensions in mm

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=91.84×lg –0.683

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=13312.0×AL–1.008

NI40%=14620.9×AL–1.011

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%20%

NI20%=14302.4×AL–1.010

NI40%=15381.9×AL–1.008

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=96.66×lg –0.626

(17/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ELT Series ELT18X7.3 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90ELT18X7.3 gapped core (Typical) PC90ELT18X7.3 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95ELT18X7.3 gapped core (Typical) PC95ELT18X7.3 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90ELT18X7.3-Z 3100±25% 0.7(100°C)PC95ELT18X7.3-Z 4760±25% 0.6/0.55/0.6(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.538Effective magnetic path length e mm 23.8Effective cross-sectional area Ae mm2 44.3Effective core volume Ve mm3 1050Cross-sectional winding area of core Acw mm2 20.9Weight (approx.) g 6.0

14.4±0.255.65±0.1

4.0±0.15 10.47±0.24.

55±0

.1

15.0

±0.3

18.0

±0.3

14.4±0.251.65±0.1

18.0

±0.3

Dimensions in mm

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=101.52×lg –0.7339

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=21202×AL–1.0393

NI40%=22470×AL–1.0421

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=20017×AL–1.0437

NI40%=21538×AL–1.0502

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=101.1×lg –0.7549

(18/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ELT Series ELT25X8.6 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90ELT25X8.6 gapped core (Typical) PC90ELT25X8.6 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95ELT25X8.6 gapped core (Typical) PC95ELT25X8.6 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90ELT25X8.6-Z 5400±25% 1.8(100°C)PC95ELT25X8.6-Z 7540±25% 1.6/1.5/1.6(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.350Effective magnetic path length e mm 30.0Effective cross-sectional area Ae mm2 85.6Effective core volume Ve mm3 2570Cross-sectional winding area of core Acw mm2 29.0Weight (approx.) g 15

20.0±0.356.29±0.15

4.0±0.15 14.54±0.256.

32±0

.15

20.8

3±0.

35

25.0

±0.4

520.0±0.352.29±0.1

25.0

±0.4

5

Dimensions in mm

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=166.92×lg –0.7706

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=45556×AL–1.0498

NI40%=46960×AL–1.0467

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=39397×AL–1.0349

NI40%=41868×AL–1.0374

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=188.04×lg –0.6956

(19/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

PQI Series PQI16/7.8 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90PQI16/7.8 gapped core (Typical) PC90PQI16/7.8 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95PQI16/7.8 gapped core (Typical) PC95PQI16/7.8 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90PQI16/7.8Z-12 3600±25% 0.5(100°C)PC95PQI16/7.8Z-12 4910±25% 0.45/0.35/0.45(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.467Effective magnetic path length e mm 19.5Effective cross-sectional area Ae mm2 41.8Effective core volume Ve mm3 815Cross-sectional center pole area Acp mm2 11.3Weight (approx.) g 5.0

14.4

±0.3

16.4

±0.3

ø7.

0±0.

2

9.6m

in.

11.2±0.15 5.4±0.1

3.05±0.15

16.4

±0.3

9.6m

in.

11.2±0.3 2.35±0.1

Dimensions in mm

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=79.28×lg –0.7555

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=15271×AL–0.9935

NI40%=19105×AL–1.0297

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=15175×AL–1.0107

NI40%=16692×AL–1.0194

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=80.885×lg –0.6993

(20/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

PQI Series PQI20/9 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90PQI20/9 gapped core (Typical) PC90PQI20/9 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95PQI20/9 gapped core (Typical) PC95PQI20/9 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90PQI20/9Z-12 5200±25% 0.8(100°C)PC95PQI20/9Z-12 7070±25% 0.75/0.65/0.75(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.346Effective magnetic path length e mm 22.9Effective cross-sectional area Ae mm2 66.0Effective core volume Ve mm3 1510Cross-sectional winding area of core Acw mm2 14.0Weight (approx.) g 9.018

.0±0

.4

20.5

±0.4

ø8.

8±0.

2

12.0

min

.

14.0±0.4 6.0±0.1

3.05±0.15

20.5

±0.4

12.0

min

.14.0±0.4 2.95±0.1

Dimensions in mm

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=108.98×lg –0.8221

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=31243×AL–1.0397

NI40%=31082×AL–1.0308

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=25802×AL–1.0258

NI40%=24743×AL–1.0086

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=108.84×lg –0.8199

(21/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

PQI Series PQI26/12 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90PQI26/12 gapped core (Typical) PC90PQI26/12 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95PQI26/12 gapped core (Typical) PC95PQI26/12 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90PQI26/12Z-12 8600±25% 1.6(100°C)PC95PQI26/12Z-12 11950±25% 1.5/1.4/1.5(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.224Effective magnetic path length e mm 27.7Effective cross-sectional area Ae mm2 123Effective core volume Ve mm3 3410Cross-sectional winding area of core Acw mm2 16.3Weight (approx.) g 2122

.5±0

.45

26.5

±0.4

5

ø12

.0±0

.2

15.5

min

.

19.0±0.45 7.3±0.1

3.1±0.15

26.5

±0.4

5

15.5

min

.19.0±0.45 4.2±0.1

Dimensions in mm

104

103

102

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=284.51×lg –0.831

102

103

NI l

imit(

AT

)

AL-value(nH/N2)104103102101

Temperature: 100˚C

40%

20%

NI20%=74915.0×AL–1.0468

NI40%=8564.0×AL–1.0607

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)104103102101

Temperature: 100˚C

40%

20%

NI20%=72721×AL–1.0548

NI40%=71923×AL–1.0453

104

103

102

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=287.77×lg –0.08483

(22/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

EIR Series EIR14/4.5/9 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90EIR14/4.5/9 gapped core (Typical) PC90EIR14/4.5/9 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95EIR14/4.5/9 gapped core (Typical) PC95EIR14/4.5/9 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90EIR14/4.5/9-Z 2050±25% 0.3(100°C)PC95EIR14/4.5/9-Z 2800±25% 0.25/0.2/0.25(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.679Effective magnetic path length e mm 15.4Effective cross-sectional area Ae mm2 22.7Effective core volume Ve mm3 349Cross-sectional winding area of core Acw mm2 5.84Weight (approx.) g 2.0

9.0±0.23.2±0.1

1.9±0.1

ø5.

2±0.

1

11.3

5±0

.15

1.25

1.25

13.8

5±0

.25

9.2±0.2 1.3±0.1

14.0

±0.2

Dimensions in mm

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=44.153×lg –0.7138

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=9794.7×AL–1.0231

NI40%=11668×AL–1.0519

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=9192.1×AL–1.021

NI40%=11113×AL–1.0546

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=44.199×lg –0.7139

(23/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

EIR Series EIR18/5/12 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90EIR18/5/12 gapped core (Typical) PC90EIR18/5/12 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95EIR18/5/12 gapped core (Typical) PC95EIR18/5/12 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90EIR18/5/12-Z 2500±25% 0.45(100°C)PC95EIR18/5/12-Z 3690±25% 0.4/0.35/0.4(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.601Effective magnetic path length e mm 19.7Effective cross-sectional area Ae mm2 32.8Effective core volume Ve mm3 645Cross-sectional winding area of core Acw mm2 9.75Weight (approx.) g 3.8

12.0±0.23.5±0.1

2.0±0.1

ø6.

0±0.

1

15.7

5±0

.25

1.2

1.2

18.1

5±0

.3

12.2±0.2 1.5±0.1

18.2

±0.2

5

Dimensions in mm

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=62.293×lg –0.6882

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%20%

NI20%=10781×AL–0.9789

NI40%=17608×AL–1.0637

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%20%

NI20%=15611×AL–1.0039

NI40%=14533×AL–0.9802

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=62.305×lg –0.6887

(24/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ER Series　ER9.5/5 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90ER9.5/5 gapped core (Typical) PC90ER9.5/5 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95ER9.5/5 gapped core (Typical) PC95ER9.5/5 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90ER9.5/5-Z 610min. 0.1(100°C)PC95ER9.5/5-Z 1190±25% 0.1/0.09/0.1(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 1.67Effective magnetic path length e mm 14.2Effective cross-sectional area Ae mm2 8.47Effective core volume Ve mm3 120Cross-sectional winding area of core Acw mm2 7.07Weight (approx.) g 0.7

Dimensions in mm

7.0m

in.

9.5

+0

–0.3

ø3.

5+

0–0

.2

2.5+0–0.1

1.6+0.15–0

5.0+0–0.2

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=18.26×lg –0.7831

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=3109.2×AL–1.0106

NI40%=3298.3×AL–1.0159

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=2721.3×AL–1.0066

NI40%=2921.8×AL–1.0149

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=18.225×lg –0.783

(25/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ER Series ER14/4.5/9 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90ER14/4.5/9 gapped core (Typical) PC90ER14/4.5/9 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95ER14/4.5/9 gapped core (Typical) PC95ER14/4.5/9 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90ER14/4.5/9-Z 2100±25% 0.3(100°C)PC95ER14/4.5/9-Z 2550±25% 0.25/0.2/0.25(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.679Effective magnetic path length e mm 15.4Effective cross-sectional area Ae mm2 22.7Effective core volume Ve mm3 349Cross-sectional winding area of core Acw mm2 5.84Weight (approx.) g 2.0

Dimensions in mm

9.0±0.22.25±0.1

0.95±0.1

ø5.

2±0.

1

11.3

5±0.

151.

251.

25

13.8

5±0

.25

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=41.575×lg –0.7757

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=9022.4×AL–1.0034

NI40%=9982×AL–1.0153

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=8453.1×AL–1.0008

NI40%=9337.8×AL–1.0133

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=41.576×lg –0.7762

(26/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ER Series ER14.5/6 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC95ER14.5/6 gapped core (Typical) PC95ER14.5/6 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W) at 25/80/120°C100kHz, 200mT

PC95ER14.5/6-Z 3500±25% 0.3/0.28/0.3

PARAMETERCore factor C1 mm–1 1.08Effective magnetic path length e mm 19.0Effective cross-sectional area Ae mm2 17.6Effective core volume Ve mm3 333Cross-sectional winding area of core Acw mm2 8.42Weight (approx.) g 2.0

3.0+0–0.1

Dimensions in mm

6.7±0.1

1.65±0.1

ø4.

7±0.

2

11.8

±0.2

1.35

1.35

14.5

±0.2

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=4507×AL–0.9671

NI40%=4424×AL–0.9516

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=43.027×lg –0.7185

(27/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

ER Series ER18/5/12 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90ER18/5/12 gapped core (Typical) PC90ER18/5/12 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95ER18/5/12 gapped core (Typical) PC95ER18/5/12 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90ER18/5/12-Z 2900±25% 0.5(100°C)PC95ER18/5/12-Z 3500±25% 0.45/0.4/0.45(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 0.601Effective magnetic path length e mm 19.7Effective cross-sectional area Ae mm2 32.8Effective core volume Ve mm3 645Cross-sectional winding area of core Acw mm2 9.75Weight (approx.) g 3.8

Dimensions in mm

12.0±0.12.5±0.1

1.0±0.1

ø6.

0±0.

1

15.7

5±0.

251.

21.

2

18.1

5±0

.3

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=61.29×lg –0.7237

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%20%

NI20%=8664.9×AL–0.9482

NI40%=8641.1×AL–0.9377

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%20%

NI20%=8250×AL–0.9491

NI40%=8177.2×AL–0.9384

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=61.294×lg –0.7242

(28/28)

001-01 / 20110420 / e142.fm

• All specifications are subject to change without notice.

EI Series EI14/5/5 Cores

∗ 1kHz, 0.5mA, 100Ts

NI limit vs. AL-value for AL-value vs. Air gap length forPC90EI14/5/5 gapped core (Typical) PC90EI14/5/5 core (Typical)

NI limit vs. AL-value for AL-value vs. Air gap length forPC95EI14/5/5 gapped core (Typical) PC95EI14/5/5 core (Typical)

Part No. AL-value (nH/N2)∗ Core loss (W)100kHz, 200mT

PC90EI14/5/5-Z 1200±25% 0.3(100°C)PC95EI14/5/5-Z 1550±25% 0.3/0.25/0.3(25°C/80°C/120°C)

PARAMETERCore factor C1 mm–1 1.11Effective magnetic path length e mm 16.7Effective cross-sectional area Ae mm2 15.0Effective core volume Ve mm3 251Cross-sectional winding area of core Acw mm2 8.0Weight (approx.) g 1.3

5.0±0.111

.0±0

.25

1.5

1.5

14.0

±0.3

3.0±

0.1

3.5±0.1

2.0±0.11.5

5.0±0.11.5±0.05

14.0

±0.3

Dimensions in mm

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=37.239×lg –0.6627

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=5602.2×AL–0.9893

NI40%=5612.1×AL–0.9697

Note: NI limit shows the point where the exciting current is 20% and 40% away from its extended linear part.

Measuring conditions • Coil: ø0.18 2UEW 100Ts • Frequency: 1kHz• Level: 0.5mA

102

103

NI l

imit(

AT

)

AL-value(nH/N2)103102101101

Temperature: 100˚C

40%

20%

NI20%=5271.1×AL–0.9877

NI40%=5298.5×AL–0.9694

103

102

101

AL-

valu

e(nH

/N2 )

Air gap length(mm)0.01 0.10 1 10

Center pole gap

Temperature: 25˚C

AL=37.242×lg –0.6633