FERRITE CORES AND TILES FERRITE CORES AND TILES - Rev15 - 10/08/2013 The specifications and properties regarding performance above are not guaranteed, and are subject to change without notice due to product improvement and specification change. Please contact us before use. For storage of the products keep them in cool and dry rooms at ambient temperature avoiding high temperatures, humidity, and direct sunlight. All statements, technical information, and recommendations herein are based on tests and are believed to be reliable, but the accuracy and completeness are not guarantee d and are subject to change without notice due to product improvement and specification change. The following is made in lieu of all warranties, expressed or implied, including the implied warranties of marketability and fitness for purpose. Intermark USA’s obligation under this warranty shall be limited to replacement of product that proves to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith. Intermark USA shall have no liability for any injury, loss or damage arising out of the use of or the inability to use the products. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller and manufacturer. 1. Shape factor (Se/Le): larger the shape factor, the higher the impedance. For the case of 1 pass through the core, a snug fit, and longer core is recommended as space permits. 2. Adjust the ferrite core positioning to target for antinode placement. 3. Performance can be increased by looping the cable around the core between to 3~5 times. GTFCK Series GTFC Series GRFC Series RFCK2-20 (w/mounting tab) ROUND CABLE CORES: Split Type G Ferrite Core - no nickel and competitively priced NEW! GRFC Series PART NO. A B C D Applicable Cable Diameter (mm) Impedance Ω/100MHz GRFC-3 13.7 13.5 18.0 - 3.0 ~ 4.0 ≥35 GRFC-4 13.7 13.5 27.5 - 3.5 ~ 4.5 ≥75 GRFC-5 18.1 18.4 31.5 35.5 4.5 ~ 5.5 ≥100 GRFC-6 18.1 18.4 31.5 35.5 5.5 ~ 6.5 ≥100 GRFC-7 14.25 15.8 20.0 24.0 7.0 MAX ≥45 GRFC-8 20.1 20.4 31.5 35.5 7.5 ~ 8.5 ≥75 GRFC-9 20.1 20.4 31.5 35.5 8.5 ~ 9.5 ≥75 GRFC-10 26.3 26.4 32.4 37.2 9.5 ~ 10.5 ≥105 GRFC-13 29.1 29.4 31.5 36.3 12.5 ~ 13.5 ≥95 RFC Series RFC-H13 31.7 29.4 41.0 - 12.5 ~ 13.5 ≥170 RFC-20 40.0 40.0 47 - 20 MAX ≥180 RFCK-20 (RFC-20 with mount tab) 40.0 40.0 47 - 20 MAX ≥180 GTFC Series GTFC-16-8-13 22.3 20.1 18.9 - 7.2 MAX ≥ 45 GTFC-16-8-16. 22.3 20.1 21.9 - 7.2 MAX ≥ 55 GTFC-20-10-10 27.1 24.9 16.0 - 8.5 MAX ≥ 40 GTFC-23-11-14 30.5 28.3 20.2 - 10.5 MAX ≥ 55 GTFC-25-15-12 31.1 28.9 17.8 - 13.0 MAX ≥ 40 GTFC-28-16-13 35.1 32.9 18.8 - 14.7 MAX ≥ 50 GTFC-28-16-20 35.1 32.9 25.8 - 14.7 MAX ≥ 70 GTFC-41-27-16 48.2 44.5 19.6 - 26.0 MAX ≥ 50 GTFCK Series GTFCK-16-8-13 32.5 20.4 18.9 22.9 7.2 MAX ≥ 45 GTFCK-16-8-16 32.5 20.4 21.9 25.9 7.2 MAX ≥ 55 GTFCK-20-10-10 37.1 24.9 16.0 20.0 8.5 MAX ≥ 40 GTFCK-23-11-14 40.5 28.3 20.2 24.2 10.5 MAX ≥ 55 GTFCK-25-15-12 41.2 28.9 17.8 21.8 13.0 MAX ≥ 40 GTFCK-28-16-13 45.3 32.9 18.8 22.8 14.7 MAX ≥ 50 GTFCK-28-16-20 45.3 32.9 25.8 29.8 14.7 MAX ≥ 70 GTFCK-41-27-16 51.8 44.5 19.6 - 26.0 MAX ≥ 50 TRCA Series TRCA-20-10-10 22.6 8.2 13.3 - ≥ 50 TRCA-25-15-12 27.3 13.1 15.2 - ≥ 50 TRCA Series
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
FERRITE CORES AND TILES
FERRITE CORES AND TILES - Rev15 - 10/08/2013
The specifications and properties regarding performance above are not guaranteed, and are subject to change without notice due to product improvement and specification change. Please contact us before use. For storage of the products keep them in cool and dry rooms at ambient temperature avoiding high temperatures, humidity, and direct sunlight.
All statements, technical information, and recommendations herein are based on tests and are believed to be reliable, but the accuracy and completeness are not guarantee d and are subject to change without notice due to product improvement and specification change. The following is made in lieu of all warranties, expressed or implied, including the implied warranties of marketability and fitness for purpose. Intermark USA’s obligation under this warranty shall be limited to replacement of product that proves to be defective. Before using, user shall determine the suitability of the product for its intended use, and user assumes all risk and liability whatsoever in connection therewith. Intermark USA shall have no liability for any injury, loss or damage arising out of the use of or the inability to use the products. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller and manufacturer.
1. Shape factor (Se/Le): larger the shape factor, the higher the impedance. For the case of 1 pass through the core, a snug fit, and longer core is recommended as space permits.
2. Adjust the ferrite core positioning to target for antinode placement. 3. Performance can be increased by looping the cable around the core between to 3~5 times.
GTFCK Series
GTFC Series
GRFC Series
RFCK2-20 (w/mounting tab)
ROUND CABLE CORES: Split Type G Ferrite Core - no nickel and competitively priced NEW! GRFC Series
-Aimed to suppress low frequency noise between 150KHz to 30MHz. -Plastic screw mounting option available -Operating temperature: -40°C ~85°C -UL94V-0-rated housing
Part No. Part No. (screw mount option) A B C D Applicable
RFC-*MA – Low frequency, high µ ferrite cores -Aimed to suppress low frequency noise generated by engine control units (ECU), inverters, and motors. -Split type with plastic casing -Operating Temperature: -40°C ~ 125°C -Casing has a designated area for placing a plastic cable tie -UL-94V-2 rated
Part No. A B C Applicable Cable Diameter
Impedance Ω/10MHz
RFC-8MA 20.6 19.8 34.0 8.5 (MAX)
≥20 RFC-13MA 29.6 28.4 34.0 12.5~13.5
RFC-20MA 40.0 40.0 47.0 20 (MAX)
Screw mount option
FLAT CABLE CORES: 1-Piece Type GFPC Series
Part No. A B C D E Impedance Ω/100MHz
GFPC-11-8-2 11.0 0.7 2.3 8.0 9.0 25
GFPC-16-5-3 16.0 0.5 3.0 5.0 11.5 20
GFPC-16-12 16.0 0.5 5.0 12.0 11.5 45
GFPC-16-20 16.0 0.8 5.0 20.0 11.5 60
GFPC-22-8-2 21.5 0.7 2.3 8.0 18.0 25
GFPC-24-12-3 23.3 0.9 3.0 12.0 20.0 30
GFPC-25-10-3 25.0 0.8 3.0 10.0 21.5 25
GFPC-25-12 24.5 0.5 5.0 12.0 20.0 35
GFPC-25-15-3 25.5 0.8 3.0 15.0 21.5 35
GFPC-25-20 24.5 0.5 5.0 20.0 20.0 50
GFPC-31-12 31.0 0.5 5.0 12.0 27.0 40
GFPC-31-12-3 31.0 1.0 3.0 12.0 27.0 30
GFPC-46-12 46.0 0.5 5.0 12.0 41.5 40
GFPC-56-12 56.2 0.5 5.0 12.0 52.4 35
GSSC-33.5-10 33.5 1.4 6.5 10.0 28.4 30
GSSC-33.5-12 33.5 1.4 6.5 12.0 28.4 35
GSSC-33.5-20 33.5 1.3 6.5 20.0 27.8 50
GSSC-33.5-10-2 33.5 2.2 7.4 10.0 27.0 30
GSSC-40-12 40.0 1.3 6.5 12.0 35.0 35
GSSC-45-8 45.0 1.3 6.5 8.0 40.0 30
GSSC-45-12 45.0 1.3 6.5 12.0 40.0 35
GSSC-50-12 50.0 1.4 6.5 12.0 44.9 35
GSSC-58-12 57.6 1.3 6.5 12.0 52.0 35
NEW! G Ferrite Core - no nickel and competitively priced
FLAT CABLE CORES: 2-Piece Type GSSH and GFPH series are a set of two of the same U-shaped pieces, while GFPO series has a combination of one U-shaped piece
AMORPHOUS CORE -Higher magnetic permeability and saturated magnetic density than a ferrite core. -Suppresses noise from 150KHz to 30MHz generated by a switching regulator or an inverter.
METAL CORE -Due to higher magnetic flux density, current superposition (current at 20A or less) will not lower the impedance. -Resin-coated core to protect cables. -Impedance is stable from -40°C~+140°C, with a high Curie temp. -Possible to suppress normal mode noise.
MPTR-40-24-15E Impedance vs Frequency (with DC superposition)