DECORATIVE INDOOR MWV Catalog Number Notes Type FEATURES & SPECIFICATIONS INTENDED USE Provides maintenance-free, energy-efficient accent or/and task lighting in commercial and residential applications. Mix and match fitters with any number of decorative shades/diffusers from Lithonia Lighting (see shade ordering information on back of sheet) to create a look that perfectly complements any décor. Ideal for mounting in hallways, over seating areas or flanking mirrors in restrooms. CONSTRUCTION Cast aluminum fitters and matching wall brackets are finished in bronze. Includes (3) set screws which hold glass shades that mount to the inside of the fitter. Shades that mount to the outside of the fitter include (3) suspension rods that screw into the fitter. Shades sold separately (see shade ordering information on back of sheet). OPTICS Fixtures utilize 3000 K high performance LEDs and come in either 600-lumen 2-lamp or 820-lumen 3-lamp configurations. ELECTRICAL 50,000-hour L70 rated life. LED driver is 120V and operates at 60Hz. Works with most standard incandescent dimmers. INSTALLATION Fitters must be mounted facing down to accommodate shades with suspension rods. All other fixtures can be mounted facing either up or down. All mounting hardware included. LISTINGS UL listed to US safety standards. WARRANTY Five-year limited warranty. Full warranty terms located at www.AcuityBrands.com/CustomerResources/Terms_and_Conditions.aspx. NOTE: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. BZ Series/Style/ Fitter quantity Finish Series MWV LED vanity Style 1,2,3 B Bullet C Cylinder Fitter quantity 2 2 fitter heads 3 3 fitter heads BZ Bronze ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: MWVB2 BZ Decorative Indoor MWV LED VANITY WITH MIX & MATCH SHADES HIGH-PERFORMANCE LED Notes 1. Glass shades must be ordered separately. See next page for ordering information. 2. Bullet available in 2-light BZ only. 3. Cylinder available in 3-light BZ only. A C B Nominal size Model number Description (A) Width inches (cm) (B) Height inches (cm) (C) Extension inches (cm) 2 light bullet MWVB2 (2) LED fitters - bullet 8-1/4 (20.9) 4-5/8 (11.7) 6-1/2 (16.5) 3 light bullet MWVB3 (3) LED fitters - bullet 19-1/2 (49.5) 4-5/8 (11.7) 6-1/2 (16.5) 2 light cylinder MWVC2 (2) LED fitters - cylinder 11 (94.6) 4-5/8 (11.7) 5-1/2 (14.0) 3 light cylinder MWVC3 (3) LED fitter - cylinder 19-1/8 (48.6) 4-5/8 (11.7) 5-1/2 (14.0)