AN ISO 9001:2008 CERTIFIED COMPANY Pressure Reducing Valve A Pressure Controller 12 months WARANTEE UV-142-N FEATURES : Integral Stainless Steel Strainer Fine Outlet Pressure Adjustment Long Spring Life Pressure Reduction Ratio Up To 35 : 1 Easy Maintenance APPLICATION : MATERIALS: The Valve have Integral Fine Stainless Steel Mesh filter, to prevent valve seat leakage problem caused by small particle in steam/air flow. A small pitch adjusting screw make it possible to make extremely small adjustment in outlet pressure. The locknut prevents accidental adjustment. Inlet fluctuating pressure dose not affect the outlet pressure. There is no contact between primary spring & steam/air. Which prevents the problem of spring rusting & helps to increase the spring life. Single valve capable to reduce pressure up to th 35 part of inlet pressure. Normally this sort of pressure reducing valve required two stage reduction system. Easy to disassemble & assemble, without requirement of any special tool for maintenance. Easy to change stainless steel mesh & bellow. • Steam • Air • Optional body material with female screwed & flanged end • Stainless steel bellows • Stainless steel fine filter with 0.20mm mesh • Stainless steel material valve trims IBR Certified
2
Embed
FEATURES : Reducing Valve · dimensions screwed/flanged : pn 20/pn25 size 15 20 25 40 50 l (mm) 90 90 90 148 148 h (mm) 120 120 120 210 210 h (mm) 180 180 180 320 320 d ½" bsp ¾"
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
AN ISO 9001:2008 CERTIFIED COMPANY
Pressure Reducing Valve
A Pressure Controller
12monthsWARANTEE
UV-142-N
FEATURES :Integral Stainless Steel Strainer
Fine Outlet Pressure Adjustment
Long Spring Life
Pressure Reduction Ratio Up To 35 : 1
Easy Maintenance
APPLICATION :
MATERIALS:
The Valve have Integral Fine Stainless Steel
Mesh filter, to prevent valve seat leakage
problem caused by small particle in steam/air
flow.
A small pitch adjusting screw make it possible to make extremely small adjustment in outlet pressure. The locknut prevents accidental adjustment. Inlet fluctuating pressure dose not affect the outlet pressure.
There is no contact between primary spring & steam/air. Which prevents the problem of spring rusting & helps to increase the spring life.
Single valve capable to reduce pressure up to th 35 part of inlet pressure. Normally this sort of
pressure reducing valve required two stage reduction system.
Easy to disassemble & assemble, without requirement of any special tool for maintenance. Easy to change stainless steel mesh & bellow.
Secondary Pressure must not exceed 80% of primary pressure.
Secondary pressure must not less than 1/35 of primary pressure.
Body design condition
Body Material
Maximum Design Temperature
Maximum Design Pressure
Maximum Operating Pressure For Saturated Steam Barg
Maximum Differential Pressure (Barg)
Primary Pressure Range (Barg)
Adjustable Pressure Range (Barg)
PN-20
Bronze / Cast Iron
220 C @ 10 barg
16 barg @ 100 C
12
10
2.0-12.0
0.15 - 8.0
Screwed, Flanged & Socket WeldEnd Connection
GUARANTEE All valves are guaranteed against any manufacturing defects for a period of 12 months from date of supply, provided the valves have not been misused, damaged or installed for services they are not recommended. The company shall be liable to furnish part / parts thereof or full valve as the company may deem fit.
Ductile Iron Standard
Cast Steel
Stainless Steel
Bronze
SG
CS
SS
BZ
HOW TO ORDER
0.15 - 2.0 Bar
1.5 - 4.0 Bar
3.5 - 7.0 Bar
6.5 - 12 Bar
02
04
07
12
2.0 - 4.0 Bar
4.0 - 8.0 Bar
8.0 - 14.0 Bar
14.0 - 20 Bar
04
08
14
20
½"
¾"
1"
1½"
2"
15
20
25
40
50
2" SG 0204
SCREWED
FLANGE
SOCKET WELD
SC
FL
SW
SC
Please specify the requested valve in the following sequence: