Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. www.iuseelite.com 4” 4 Inch Square Slim LED RL476 NOMINAL LUMENS DELIVERED LUMENS WATTAGE 700 772 11W 550 521 9W Based on 5000K, 90+ CRI. Actual wattage may vary +/- 5% OPEN 4.1” 1.25” 3.3” 4.25” 5.9” 0.07” 1.2” 4.7” 2.6” 6.8” Cut hole in ceiling. Insert luminaire into opening by squeezing spring clips on both sides of luminaire. The width in ceiling needed for the driver to fit is 3”. INSTALLATION FEATURES 4” square slim LED luminaire engineered for new construction, remodel, or retrofit to accommodate insulated or dropped ceilings. Remote driver allows easy installation and maintenance. Small aperture and shallow depth are ideal for unlimited applications. • IC-rated and Air-Tight ready and may be in direct contact with insulation. • Can be installed in shallow plenum spaces. • May be installed in drywall or suspended ceilings. • Flicker-free 120V forward-phase Triac dimming down to 5%. LUMENS DIMMING CCT COLOR QUALITY CRI EMERGENCY LIFETIME CONSTRUCTION TRIM OPTION TRIM COLORS 550, 700 DIMTR (Triac) 27K, 30K, 35K, 40K, 50K 3-Step MacAdam Ellipse 90+ 16W high voltage inverter L70 at 50,000 Hours Aluminum die-cast body and trim Square Flat Lens WH (White) PHOTOMETRIC TESTS In Accordance with IES LM79-08, LM80 and TM-30, TM-21
3
Embed
FEATURES - Elitelighting · RL-ACC-SLIM-1-10F SLIM TRIM ACCESSORIES OPTIONS o RL-ACC-SLIM-1-10F - 10ft Long Extension ... • Cut hole in ceiling and snap fixture in opening with
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SLIM SURFACE LEDProject Name:
Note: Type:
Catalog Number:
Submittal form is available @ www.iuseeliteled.comTel: 323-888-1973 • Fax: 323-888-1977
Specifications and Dimensions subject to change without notice.
Note: A 2-1/8” deep octagon junction box is recommended for through circuit wiring applications.
Compatible Junction Boxes:
ENGINEERED FOR VERSATILITY AND PERFORMANCE The Elite LED Slim Surface Mount has been engineered to install into most standard junctions boxes. Up to 1500 usable lumens are directed from the luminaire to the work surface. Easy to Install, applicable toJunction Box or Recessed Can Installation
OPTICS The Elite LED Module system is much more than just a simple LED retrofit. The Elite LED system is a highly engineered work of design and optical science which produces up to 1500 lumens. Our meticulously crafted optics gather the light scattered by the LED chip and shape it into a functional beam with uniform light distribution.
DIMMINGIntended for Triac (120V) base on configuration. Minimum 90º supply conductors.
COMPLIANCENon-conductive fixture for shower light application. Product complies with the requirements of the California Energy Commission regulated under Title 24.
LISTINGETL listed for damp location (wet location - with covered ceilings)Energy Star certified
WARRANTYThe Elite LED lighting system carries a five-year carefree warranty for parts and components. (Labor not included)
12”
9”
7-7/8”5-3/8”
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. w w w . i u s e e l i t e . c o m
4”4 Inch Square Slim LEDRL476
NOMINAL LUMENS DELIVERED LUMENS WATTAGE
700 772 11W
550 521 9W
Based on 5000K, 90+ CRI. Actual wattage may vary +/- 5%
OPEN
4
4.1”
1.25”
3.3”
4.25”
5.9”
0.07”
1.2”
4.7” 2.6”
6.8”
Cut hole in ceiling. Insert luminaire into opening by squeezing spring clips on both sides of luminaire. The width in ceiling needed for the driver to fit is 3”.
INSTALLATION
FEATURES4” square slim LED luminaire engineered for new construction, remodel, or retrofit to accommodate insulated or dropped ceilings. Remote driver allows easy installation and maintenance. Small aperture and shallow depth are ideal for unlimited applications.
• IC-rated and Air-Tight ready and may be in direct contact with insulation.• Can be installed in shallow plenum spaces.• May be installed in drywall or suspended ceilings.• Flicker-free 120V forward-phase Triac dimming down to 5%.
LUMENS
DIMMING
CCT
COLOR QUALITY
CRI
EMERGENCY
LIFETIME
CONSTRUCTION
TRIM OPTION
TRIM COLORS
550, 700
DIMTR (Triac)
27K, 30K, 35K, 40K, 50K
3-Step MacAdam Ellipse
90+
16W high voltage inverter
L70 at 50,000 Hours
Aluminum die-cast body and trim
Square Flat Lens
WH (White)
PHOTOMETRIC TESTS In Accordance with IES LM79-08, LM80 and TM-30, TM-21
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. w w w . i u s e e l i t e . c o m
4”4 Inch Square Slim LEDRL476
TYPE LUMEN CCT CRI FINISHRL476 o 700L-DIMTR-120
o 550L-DIMTR-120o 27Ko 30Ko 35Ko 40Ko 50K
o 90+ o WH-White
EXAMPLE: RL476-550L-DIMTR-120-30K-90-WH
26"
6 18 "
2 34 "
4 12 "
13"
3 116 "
316 "
26"
13" 2 1516 "
6 18 "
4 12 "
3 116 "
316 "
4 14 "
26"13"
6 18 " 4 9
16 "
3 116 "
316 "
26” 13” 4-1/4”
3-1/16”
3/16”
6-1/8” 6-9/16”
RL-ACC-SLIM-1-10F
SLIM TRIM ACCESSORIES
OPTIONSo RL-ACC-SLIM-1-10F - 10ft Long Extensiono RL-ACC-SLIM-1-20F - 20ft Long Extensiono RL-UNV-4/5/6 - Universal Mounting Plate for 4”,5” and 6”o RL-ACC-SLIM-4-ROUGHPLATE - 4” Mounting Plate
442
2”
I S S U E 1 5 G 2 1 R e v . 0 . 1
WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
S H I P P I N G AVA I L A B L E
1” GIMBAL LED FIXTURE WITH REFLECTORw 1-5/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS
w FEATURES1” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.
w Cast aluminum trim
w Dimmable
w ETL approved and Energy Star Certified
w Type IC Rated – Approved for direct contact with insulation
w Air-tight and damp location approved
w Fast and easy to install in limited space locations
w External driver factory mounted inside connection box - 120V
w New construction rough-in plates and jumper cables available
w Available Temperatures (3000K, 3500K and 4000K)
w 50,000 Hours Life; 5 Year Warranty
TECHNICAL SPECIFICATIONS
w WATTAGES: 5W
w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)
w CRI: 90+
w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)
w ADJUSTABLE: 30º tilt and 360º rotation
CERTIFICATIONS• ETL listed• ENERGY STAR
INSTALLATION
• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".
360DIMENSION
INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS
120 60Hz <20% >0.98 5W(+/-5%) 360L
12-7/8”
2-3/4”
1-3/4”
2”
TYPE LUMEN CCT CRI FINISH ACCESSORIES
RL173 o 360L-DIMTR-120 o 30Ko 35Ko 40K
90+ WH o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20F
EXAMPLE: RL173-360L-DIMTR-120-30K-90-WH
RL-ACC-SLIM-1-10F10-ft long extension
RL-ACC-SLIM-1-20F20-ft long extension
2
INC
H
LE
D
RE
TR
OF
IT
MO
DU
LE
RL173 LED1” GIMBAL LED FIXTURE WITH REFLECTOR
2-1/2”
1-5/8”
442
2”
I S S U E 1 5 G 2 1 R e v . 0 . 1
WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
S H I P P I N G AVA I L A B L E
1” GIMBAL LED FIXTURE WITH REFLECTORw 1-5/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS
w FEATURES1” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.
w Cast aluminum trim
w Dimmable
w ETL approved and Energy Star Certified
w Type IC Rated – Approved for direct contact with insulation
w Air-tight and damp location approved
w Fast and easy to install in limited space locations
w External driver factory mounted inside connection box - 120V
w New construction rough-in plates and jumper cables available
w Available Temperatures (3000K, 3500K and 4000K)
w 50,000 Hours Life; 5 Year Warranty
TECHNICAL SPECIFICATIONS
w WATTAGES: 5W
w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)
w CRI: 90+
w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)
w ADJUSTABLE: 30º tilt and 360º rotation
CERTIFICATIONS• ETL listed• ENERGY STAR
INSTALLATION
• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".
360DIMENSION
INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS
120 60Hz <20% >0.98 5W(+/-5%) 360L
12-7/8”
2-3/4”
1-3/4”
2”
TYPE LUMEN CCT CRI FINISH ACCESSORIES
RL173 o 360L-DIMTR-120 o 30Ko 35Ko 40K
90+ WH o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20F
EXAMPLE: RL173-360L-DIMTR-120-30K-90-WH
RL-ACC-SLIM-1-10F10-ft long extension
RL-ACC-SLIM-1-20F20-ft long extension
2
INC
H
LE
D
RE
TR
OF
IT
MO
DU
LE
RL173 LED1” GIMBAL LED FIXTURE WITH REFLECTOR
2-1/2”
1-5/8”
442
2”
I S S U E 1 5 G 2 1 R e v . 0 . 1
WWW.IUSEELITE.COM • TEL 1-877-375-5555 • FAX 1-877-375-3333
S H I P P I N G AVA I L A B L E
1” GIMBAL LED FIXTURE WITH REFLECTORw 1-5/8” THICK LED FIXTURE WITH HIGHER BRIGHTNESSw FOR NEW CONSTRUCTION – INSULATED AND DROPPED CEILINGS
w FEATURES1” fixtures with integral LEDs. Isolated external driver factory installed inside junction box.One driver for every fixture required. PF>0.98.
w Cast aluminum trim
w Dimmable
w ETL approved and Energy Star Certified
w Type IC Rated – Approved for direct contact with insulation
w Air-tight and damp location approved
w Fast and easy to install in limited space locations
w External driver factory mounted inside connection box - 120V
w New construction rough-in plates and jumper cables available
w Available Temperatures (3000K, 3500K and 4000K)
w 50,000 Hours Life; 5 Year Warranty
TECHNICAL SPECIFICATIONS
w WATTAGES: 5W
w OUTPUT: Default Driver Voltage: 120V AC 60 Hz (Dimmable)
w CRI: 90+
w AMBIENT TEMPERATURE: -40°F (-40°C) to +104°F (+40°C)
w ADJUSTABLE: 30º tilt and 360º rotation
CERTIFICATIONS• ETL listed• ENERGY STAR
INSTALLATION
• Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the ceiling height – 3".
360DIMENSION
INPUT VOLT. INPUT FREQ. THD POWER FACTOR INPUT POWER LUMENS
120 60Hz <20% >0.98 5W(+/-5%) 360L
12-7/8”
2-3/4”
1-3/4”
2”
TYPE LUMEN CCT CRI FINISH ACCESSORIES
RL173 o 360L-DIMTR-120 o 30Ko 35Ko 40K
90+ WH o RL-ACC-SLIM-1-10Fo RL-ACC-SLIM-1-20F
EXAMPLE: RL173-360L-DIMTR-120-30K-90-WH
RL-ACC-SLIM-1-10F10-ft long extension
RL-ACC-SLIM-1-20F20-ft long extension
2
INC
H
LE
D
RE
TR
OF
IT
MO
DU
LE
RL173 LED1” GIMBAL LED FIXTURE WITH REFLECTOR
2-1/2”
1-5/8”
RL-ACC-SLIM-4-ROUGHPLATERough-in plate for use with 4” downlights
15-1/8” 13-1/8”
3-7/8”
3-3/4”
7-3/4”
6” Opening 5” Opening 4” Opening
RL-UNV-4/5/6For use with: 4”, 5”, 6”
Universal mounting plate
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information. w w w . i u s e e l i t e . c o m