FWB-1 April 2016 Pleated Shades Features & Benefits CONTENTS FAUX WOOD BLINDS Access Faux Wood FWB-2 Paramount Faux Wood FWB-4 Product Overview • Features and Benefits FWB-7 • Style and Color Listing FWB-8 Pricing Information • 2” Faux Wood – Whites & Neutrals Price Chart and Surcharges FWB-9 • 2” Faux Wood – Wood Tones Price Chart and Surcharges FWB-10 • 2-1/2” Faux Wood – Whites & Neutrals Price Chart and Surcharges FWB-11 • 2-1/2” Faux Wood – Wood Tones Price Chart and Surcharges FWB-12 • RemoteTilt™ System and Option Surcharges FWB-13 Valance Upgrade Information • Individual Valance Ordering and Pricing/Tape Valance Option and Color Chart FWB-14 • Valances and Valance Return Information and Specifications FWB-15 • Solid and Decorative Tape Option and Listing FWB-16 Product and Specifications • Size Specifications FWB-17 • Finished Dimensions and Mounting Requirements FWB-17 Controls, Components, Ladder/Tape Placement & Stack-up Charts • Standard Rectangular FWB-18 • Component Diagram FWB-19 RemoteTilt Automation • RemoteTilt Automation – Overview FWB-20 • Radio Frequency (RF) Features, Options and Part Numbers FWB-21 • RemoteTilt Motor System Controls, Ladder/Tape Placement & Stack-up Charts FWB-22 • Measuring & Maintence FWB-23 Faux Wood Horizontal Blinds Faux wood blinds offer the look and style of real wood, yet are an practical alternative Slats are engineered from a durable polymer and PVC materials that won’t crack, chip or peel They are a perfect choice for high-moisture areas such as kitchens and bathrooms Best of all, they are easy to clean and maintain Key Features: • Standard 2” slat size is wonderful for any size window The 2 1/2” slat size provides enhanced view-through • The elegant, high-profile decorative valance looks great and is a standard feature The optional Crescent Valance provides a contemporary sleek and sophisticated appearance • A wide assortment of solid and decorative tapes provides designer fashion accents • RemoteTilt (tilt Automation) eliminates the need for tilt cords and allows for easy slat tilting at the touch of a button on the remote control • You can request the LightsOut feature and the slats will be cut without route holes This reduces the light leakage, allows for better room darkening and more privacy when the blinds are closed
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Faux wood blinds offer the look and style of real wood, yet are an practical alternative . Slats are engineered from a durable polymer and PVC materials that won’t crack, chip or peel . They are a perfect choice for high-moisture areas such as kitchens and bathrooms . Best of all, they are easy to clean and maintain .
Key Features:
• Standard 2” slat size is wonderful for any size window . The 2 1/2” slat size provides enhanced view-through .
• The elegant, high-profile decorative valance looks great and is a standard feature . The optional Crescent Valance provides a contemporary sleek and sophisticated appearance .
• A wide assortment of solid and decorative tapes provides designer fashion accents .
• RemoteTilt (tilt Automation) eliminates the need for tilt cords and allows for easy slat tilting at the touch of a button on the remote control .
• You can request the LightsOut feature and the slats will be cut without route holes . This reduces the light leakage, allows for better room darkening and more privacy when the blinds are closed .
Decorative Tapes• Designer Series and Cotton Tapes are not available
Route Holes• LightsOut (privacy) is a standard feature . No additional charge
Hardware • Installation brackets• Extension brackets, shims and hold down brackets are not available
2-on-1 Headrail • Not available
Ordering Notes • Follow basic measuring instructions on page FWB-24• Minimum finished width is 17 5/8”• Only cord tilt is available with standard controls (cord tilt left and cord lift right)
*Blinds in shaded area must be made with 2-on-1 headrail
2” Paramount Faux Wood
Although we maintain strict standards, we cannot guarantee exact dye lots .
Common Carrier Delivery: All orders with any quantity of blinds over 102” in width are considered oversize and require common carrier delivery . Therefore, a net charge of $75 per order will be charged .
2” PARAMOUT SIZE
STANDARDS Traditional Privacy Decorative Traditional Privacy Decorative Route Holes Feature Tape Route Holes Feature Tape Automation
Max Width(inches) 93” 93” 96” Max Height (inches) 120” 120” N/A 120” N/A N/A N/A Max Area (Sq Ft) 45 45 80 total
Note: Width may vary +/-1/8”, height may vary +1/4” .
Control OptionsStandard• Cord tilt left (L), pull cord right (R)
Optional• Wand tilt (L), pull cord (R)• Cord or wand tilt (R), pull cord (L)• Cord or wand tilt (R), pull cord (R)• Cord or wand tilt (L), pull cord (L)• Blinds less than 10 1/2” FINISHED width will have
a centre tilt only (no pull cord)• Blinds less than 22 1/2” FINISHED width will have
split controls (L/R or R/L)• Multiple blinds on one headrail must have separate tilt controls
for each blind – single tilt not available
Note: Unless otherwise specified, tilt and pull cord lengths are approximately 1/2” blind height . Minimum tilt cord length is 12 1/2” . With wand tilt, pull cord length will match wand length . Minimum pull cord and wand length is 12” .
Ordering Notes• Decorative tapes, cut-outs, specialty shapes and automation
Note: Any wand length listed above may be chosen to override the supplied standard wand length .
NUMBER OF LADDERS FINISHED WIDTH
2 ladders up to 23 1/4”
3 ladders 23 3/8” to 37 1/4”
4 ladders 37 3/8” to 51 1/4”
5 ladders 51 3/8” to 65 1/4”
6 ladders 65 3/8” to 79 1/4”
7 ladders 79 3/8” to 93”
Ladder Standards
2” Paramount Faux Wood
FWB-7
Faux Wood Blinds
April 2016
FEATURES & OPTIONS BENEFITS
Comprised of Engineered Polymer Slat MaterialDurable, alternative to wood and composite faux wood blinds . Easy to clean and maintain .
Available in 2” & 2 1/2” Slat StylesColours ranging from whites and neutrals to rich wood tones .
Standard 2” slat size is for any size window . The 2-1/2”slat size provides optimal view-through .
Standard Decorative Polymer ValanceThe Standard Decorative Valance with 3” profile is included FREE on all faux wood blinds . The elegant, high-profile decorative valance looks great and will eliminate any light gap between the headrail and the top slat .
The optional 3” Crescent Valance provides a contemporary, sleek andsophisticated appearance .
Glued-On Valance ReturnsGlued-on returns create a clean, aligned valance corner and don’t require assembly .
Solid & Decorative Tapes– Surcharge Option
A wide assortment of solid and decorative tapes provides designer fashion accents .
Tape Valance– Extra Charge Option
3” Standard Decorative Valances may be customized with 1” solid or 1 1/8” decorative tape to coordinate with the blind or other room accents .
RemoteTilt: Tilt Automation SystemRadio Frequency (RF) systemBoth single and multi-channel, programmable remote controls– Surcharge Option
RemoteTilt (tilt automation) eliminates the need for tilt cords and allows for easy slat tilting at the touch of a button on the remote control . Multi-channel systems allow for independent blind operation .
You can request the LightsOut feature and the slats will be cut without route holes . This reduces the light leakage, allows for better room darkening and more privacy when the blinds are closed .
Chart 4 - 2” Faux Woods – Whites & Neutrals 3” Standard Decorative Polymer Valance Included in Price
NO CHARGE OPTIONS
• 3” Crescent Valance (in place of 3” Standard Deco Valance)• LightsOut (privacy) Routeless Feature (not available with tapes)• Controls – left or right• Hold-Down Brackets• Tile Cut Out (maximum 3” each side)• Short and Long Extension Brackets
• Spacer Blocks – small (3/8”) and large (3/4”)• Special Wand and Cord Length (see page 19 for wand lengths)• Wand Tilter• 2 or 3-on-1 Headrail (maximum 120” on 2” blinds) – price as
Note: Blinds over 50 sq. ft require 2 or 3-on-1 Headrail
Although we maintain strict standards, we cannot guarantee exact dye lots .
Common Carrier Delivery: All orders with any quantity of blinds over 102” in width are considered oversize and require common carrier delivery . Therefore, a net charge of $75 per order will be charged .
Chart 5 – 2” Faux Wood – Wood Tones 3” Standard Decorative Polymer Valance Included in Price
NO CHARGE OPTIONS
• 3” Crescent Valance (in place of 3” Standard Deco Valance)• LightsOut (privacy) Routeless Feature (not available with tapes)• Controls – left or right• Hold-Down Brackets• Tile Cut Out (maximum 3” each side)• Short and Long Extension Brackets
• Spacer Blocks – small (3/8”) and large (3/4”)• Special Wand and Cord Length (see page 19 for wand lengths)• Wand Tilter• 2 or 3-on-1 Headrail (maximum 120” on 2” blinds) – price as
SOLID & DECORATIVE TAPE SURCHARGE NOTE: See Tape section for sizes & availability. Tapes are not available with LightsOut feature.
Note: Blinds over 50 sq. ft require 2 or 3-on-1 Headrail
Although we maintain strict standards, we cannot guarantee exact dye lots .
Common Carrier Delivery: All orders with any quantity of blinds over 102” in width are considered oversize and require common carrier delivery . Therefore, a net charge of $75 per order will be charged .
Chart 6 – 2-1/2” Faux Wood – Whites & Neutrals 3” Standard Decorative Polymer Valance Included in Price
NO CHARGE OPTIONS
• 3” Crescent Valance (in place of 3” Standard Deco Valance)• LightsOut (privacy) Routeless Feature (not available with tapes)• Controls – left or right• Hold-Down Brackets• Tile Cut Out (maximum 3” each side)• Short and Long Extension Brackets
• Spacer Blocks – small (3/8”) and large (3/4”)• Special Cord Length (2 1/2” blinds available with cord tilt only)• 2 or 3-on-1 Headrail (maximum 120” on 2” blinds) – price as
SOLID & DECORATIVE TAPE SURCHARGE NOTE: See Tape section for sizes & availability. Tapes are not available with LightsOut feature.
Note: For surcharges on oversize common carrier delivery, express ship program, shipments to Hawaii, Alaska and Puerto Rico, see General Information Section
Note: Blinds over 50 sq. ft require 2 or 3-on-1 Headrail
Although we maintain strict standards, we cannot guarantee exact dye lots .
Common Carrier Delivery: All orders with any quantity of blinds over 102” in width are considered oversize and require common carrier delivery . Therefore, a net charge of $75 per order will be charged .
Chart 7 – 2-1/2” Faux Wood – Wood Tones 3” Standard Decorative Polymer Valance Included in Price
NO CHARGE OPTIONS
• 3” Crescent Valance (in place of 3” Standard Deco Valance)• LightsOut (privacy) Routeless Feature (not available with tapes)• Controls – left or right• Hold-Down Brackets• Tile Cut Out (maximum 3” each side)• Short and Long Extension Brackets
• Spacer Blocks – small (3/8”) and large (3/4”) (one 3/8” spacer set standard with 2 1/2” blinds)
• Special Cord Length (2 1/2” blinds available with cord tilt only)• 2 or 3-on-1 Headrail (maximum 120” on 2 1/2” blinds) – price as
SOLID & DECORATIVE TAPE SURCHARGE NOTE: See Tape section for sizes & availability. Tapes are not available with LightsOut feature.
Note: Blinds over 50 sq. ft require 2 or 3-on-1 Headrail
Although we maintain strict standards, we cannot guarantee exact dye lots .
Common Carrier Delivery: All orders with any quantity of blinds over 102” in width are considered oversize and require common carrier delivery . Therefore, a net charge of $75 per order will be charged .
FWB-13
Faux Wood Blinds
RemoteTilt - Tilt Automation System NOTE: Must select RF RemoteTilt power source when ordering.
Radio Frequency (RF) RemoteTilt power options are: Single Battery Wand (reloadable), Dual Battery Wand (reloadable), and Transformer (plugs into wall outlet). Each Reloadable Battery Wand comes with a set of 8 AA lithium batteries on initial shade orders at the prices shown below. The part # below references the battery wand only.
2” and 2 1/2” Faux Wood (Charts 4 to 7)
Options: Extra Charge- Specify on order (must select RemoteTilt power source* when ordering)
Individual Valance Ordering & Pricing Refer to this pricing for “individual” valances only. (Valances on all blind orders are already standard and included in the blind price.
NOTE: Decorative Keystone can be ordered with the tape valance option but the tape will not be placed on the Keystone. It will butt up to it on each side.
Tape Valance Option
With this option, the 1” or 1 1/8” Tape is attached (glued) across the flat section of the 3” Standard Deco Valance. Refer to the faux wood/tape sample deck to coordinate faux wood and tape colours to your customer’s liking. The tape names available for this option and the 4 digit tape colour numbers are listed below. (Tape pattern orientation flows from left to right.)
VALANCE DEDUCTIONS FOR FAUX WOOD BLINDS
IB Return Length Override Inside miter to miter valance will be 1” wider than ordered width
OB NET (Valance Only) Inside miter to miter valance will be exact ordered width
IB NET (Valance Only) Valance will be exact ordered width
IB Continuous Valance will be exact size of continuous valance measurement
IBContinuous with ReturnLength Override
Inside miter to miter valance will be 1” wider than ordered width
OB Continuous Inside miter to miter valance will be exact ordered width
2” and 2 1/2” Faux Wood (Charts 4 to 7)
July 2016
FWB-15April 2016
Faux Wood Blinds
VALANCE/RETURN SPECIFICATIONS
2” and 2 1/2” Faux Wood Valances (Charts 4 to 7)
Valance & Return Configurations (outside mounts)
NOTE: Outside mount returns are adjusted longer by the factory when short or long (1-3/8” or 3-1/2”) extension brackets or when small or large (3/8” or 3/4”) spacer blocks are ordered. Only the 1st set of ordered spacer blocks will affect the return length adjustment. Please specify longer custom return lengths when ordering if additional spacer blocks will be used.Note: Inside mount blind valances do not come with returns unless specified on the order.
Keystones are designed to cover splices in oversized valances or can be used as a decorative element to add dimensional appeal.
Valances under 102” – a keystone may be added to a valance for a small surcharge. The valance will come fully assembled with the keystone positioned in the center. The colour of the keystone will match the valance.
Valances over 102” that are spliced - a keystone will automatically be provided at no charge to join the sides and cover the splice. Will require assembly.
Note: the addition of a keystone will not affect the overall width of the valance.
Custom valance widths are available upon request. Maximum widths for valance are as follows: The maximum Continuous Valance width is 102” The maximum Spliced Valance width is 120”. (See note below).
Custom return lengths are available upon request. The minimum return length is 1/2” The maximum return length is 6”
3” Return lengths are factory adjusted when extension brackets or (1 set of) spacer blocks are ordered. Short Extension Brackets = 4 1/4” Small Spacer Blocks (1st Set) = 3 3/8” Long Extension Brackets = 6 1/4” Large Spacer Blocks (1st Set) = 3 3/4”
NOTE: Valances over 102” will be spliced in the middle. A decorative keystone will be supplied at no charge to join the sides and conceal the splice.
CUSTOM VALANCE & RETURNS – MEASURED & CUT FROM THE INSIDE:
NOTE: Valances are cut to measure from the inside miter to insure the most accurate fit when installed over the headrail or window frame.
Outside
valance
Inside60"
Example for 61" wide blindsCustom Return Length
Outside3” Inside
2 1/2”
3” Crescent
FWB-16 April 2016
Faux Wood Blinds
TAPES
2” and 2 1/2” Faux Wood Solid & Decorative Tapes (Charts 4 to 7)
TAPES SPECIFICATIONS
Select the tape width, colour and design which will complement your 2” or 2 1/2” faux wood blind.
• Made from a poly/cotton blend • Resists fading or shrinking
Decorative tapes are attached to solid coloured tape ladders that are slightly narrower than the width of the decorative tape (see chart below). The ladder is pre-selected based upon this width and for colour coordination. A high tech gluing process is used to adhere the decorative tape. This process is superior to the commonly used sewing application which is visible and tends to pucker. The decorative tape is only applied to the ladder on the front of the blind. The back of the blind will have a solid colour tape visible (see chart below).
Gray Cream Bond (1-1/8”) 5007 AlabasterGray Gold Band (1-1/8”) 5006 Alabaster
Although we maintain strict standards, we cannot guarantee exact dye lots.
FWB-17April 2016
Faux Wood Blinds
2” and 2 1/2” Faux Wood Size Specifications (Charts 4 to 7)
STANDARD RECTANGULAR
Minimum Width (Net)
Maximum Width (One blind)
Minimum Height
Maximum Height
Max . AREA (SQ/FT) (Blinds over 50 SQ/FT require 2 or 3-on-1 headrail)
Maximum Width 2 or 3-on-1 Headrail
Maximum Continuous Valance Width (not spliced)
Faux Wood
2" 2-1/2"
8" 12"
96" 96"
12" 12"
108" 108"
50 sq/ft 50 sq/ft
120" 120"
102" 102"
REMOTETILT AUTOMATION
Minimum Width (Net)
Maximum Width (One blind)
Maximum Height
Maximum AREA (SQ/FT) (Blinds over 50 SQ/FT require 2-on-1 headrail)
Maximum Width 2 or 3-on-1 Headrail
Maximum Continuous Valance Width (not spliced)
2" 2-1/2"
12" 12"
96" 96"
96" 96"
50 sq/ft 50 sq/ft
N/A N/A
102" 102"
FOOTNOTES (FEATURES & SPECIFICATIONS)
1The headrail width has a 1/4” deduction to accommodate the installation brackets .
Finished Dimensions Mounting Requirements
Inside (IB) Mount
Headrail width1 – 3/4"
Blind width – 1/2"
Blind height ordered height
Valance – 1/8"
Outside (OB) Mount
Headrail width1 – 1/4"
Blind width ordered width
Blind height ordered height
Valance + 1"
Multiple Blinds on one Headrail
Gap between panels – 1/2"
Inside (IB) Mount
Minimum mounting depth: 1 1/8”
Minimum mounting depth, flush mount: 3 1/2"
Outside (OB) Mount
Minimum flat vertical surface 1 3/4”
Footnotes
1The headrail width has a 1/4” deduction on outside mounts and 3/4” deduction on inside mounts to accommodate the installation brackets .
Adjustments are taken from ordered dimensions and may vary slighly . Use a metal tape measure for all measurments .
FWB-18 April 2016
Faux Wood Blinds
CONTROLS
• Cords are colour-coordinated with slats• Standard Cord length = 1/2 blinds height• For RemoteTilt, tilt function is controlled by remote unit
CONTROL POSITIONS:Tilt Cord left / Lift Cord right (standard)Lift Cord left / Tilt Cord rightTilt & Lift Cords grouped leftTilt & Lift Cords grouped rightTilt Cord centre and no Lift Cord**Available on 2” blinds only
2” and 2 1/2” Faux Wood Control Charts / Components – Standard Rectangular (Charts 4 to 7)
MIN. WIDTH
12”
12”
18 1/8”
18 1/8”
Under 12” Net
TILT WAND (OPTIONAL FOR 2” BLINDS ONLY)
• Tilt wands are colour-coordinatedwith slats• Chart shows standard lengths. Specify other when ordering.• For RemoteTilt, tilt funtion is controlled by remote unit
Colour wands up to 48” long. Clear in 60”, 70”, 78”, 90” or 120”. Wand length optional. Specify above optional lengths when ordering.
2” FAUXWAND LENGTH BLIND LENGTH
20” 12” to 36”24” 36 1/8” to 48”36” 48 1/8” to 70”48” 70 1/8” to 84”60” 84 1/8” +
LADDER/TAPE* PLACEMENT CHARTS
• 2” and 2 1/2” Blinds
The following charts show the number of ladders based on the width of the blind.
STACK-UP CHART (APPROXIMATE)
• Headrail + Bottomrail
The following charts show the stacking height of the slats when the blind is fully raised. Add in headrail and bottomrail for total.
2” & 2 1/2” FAUX
BLIND HEIGHT STACK HEIGHT + 2 1/2”
48” 5”72” 7 1/2”84” 9 1/4”96” 10 7/8”
BOTTOMRAIL
• 2” Trapezoid bottomrails are standard on all faux wood blinds
• The “trapezoid” bottomrail provides a contoured, modern look along with improved blind operation (slat tilting & rotating).
• All 2 1/2” blinds are built with a 2” bottomrail
Trapezoid Bottom Rail
2” & 2 1/2” POLYMERBLIND LENGTH # OF LADDERS
12” to 18” 218 1/8” to 24” 224 1/8” to 36” 336 1/8” to 48” 448 1/8” to 60” 560 1/8” to 72” 672 1/8” to 84” 784 1/8” to 96” 8
FWB-19April 2016
Faux Wood Blinds
Safety Stop Ball(Part #7007736-XXX)
Cord Lock Assembly (Part #5003364000) Not Shown
Installation Bracket (Part #05-41-8-XXX)
Tape Drum(Part #5003676000)
Deco Tape Drum Support (Part #5003580000)
Lift Cords(Part #04-60-9-XXX)
Magnetic Valance Clip (Part #12-70-2009)
Faux Wood Slat
Wand Connector Kit (Part #7008700000)
Braided Ladder No Loop Cable Tape (Standard) Single Loop Cable Tape (LightsOut) Solid or Decorative Tape Ladder
Bottomrail
Tape Buttons (Part #7004035-XXX)
2” Top Slat Clip (Part #7007074000)2 1/2” Top Slat Clip (Part #SC-25)
Brass Eyelet Ladder Crimp (Part #12-70-9002)
Hold-down Bracket Set White (Part #20-0250-LR05) Zinc (Part #20-0250-LR00) (Not required on every blind)
Wood Tassel (Part #17-90-1-XXX)
D-20 Pull Cord(Part #70-61-0-XXX)
Cord Tilter (Part #5003873748)
Tilt Cord(Part #04-60-9-XXX)
End Lock End Stiffener (Part #5003655000)
Slim Design Headrail
Wand Tilter (Part #5003768000)
Tape Drum (Part #12-70-4170)
Centre Support Bracket* (Part #5003158000)
Bracket Shim(Part #12-70-4180)
3-7/8” Short Extension Brackets(Part #5003167000) (Not required on every blind)
5-7/8” Long Extension Brackets(Part #5003168000) (Not required on every blind)
*NOTE: 1 Centre Support Bracket required for blind sizes 48-1/8” to 60” and 2 bracekts required for blind sizes 60-1/8” and over .
Trapezoid Bottomrail
2” and 2 1/2” Faux Wood Product Components- Standard Rectangular (Charts 4 to 7)
Tilt Wand (optional) (Part #12-94-4-XXX)
FWB-20 April 2016
Faux Wood Blinds
2” and 2 1/2” Faux Wood RemoteTilt™ Automation: Overview (Charts 4 to 7)
With RemoteTilt™ automation blinds, a better quality of life and have more time to enjoy life’s daily pleasures. At the touch of a button, window coverings can be instantly adjusted to changing activities or the varying sun conditions.
An ideal solution is to manage glare with a RemoteTilt™ hand-held remote control. At the simple touch of a button, blinds will open or close to adjust to the changing sunlight in a room.
RemoteTilt™ automation blinds provide ultra-quiet operation. This RF system can operate blinds from virtually anywhere in the house without direct line of sight. Similar to how a garage door opener operates, radio signals travel through walls and make it possible to control multiple coverings throughout the home alone or as a group. It is also available in a 5-channel version. The multi-channel RF system allows for independent control of individual blinds and/or group control.
The RemoteTilt™ RF timer allows users to program specific times of the day to automatically adjust blinds in different areas of the house, protecting interiors from the fading effects of direct sunlight. This feature provides added security to an unoccupied home by creating a lived in look even while homeowners are away on vacation.
The battery powered RemoteTilt™ RF wireless wall switch allows blinds to be controlled when entering or exiting a room, just like the lights. The switch may be seamlessly installed without wiring next to any light switch or stand alone, and is never misplaced. This one touch privacy helps create the ideal environment whether preparing for a bath, relaxing in bed or enjoying time with the family at home.
RemoteTilt™ automated blinds are powered by Somfy, an industry leader in automated window coverings. All automated products are backed by a 5 year warranty.
May 2016
FWB-21April 2016
Faux Wood Blinds
2” & 2 1/2” Faux Wood Radio Frequency RemoteTilt Automation: Features and Options (Charts 4 to 7)
RADIO FREQUENCY (RF) REMOTETILT FEATURES:
• Highest quality patent protected design by Somfy• Advanced motor with quiet operation• Motor is fully enclosed within the headrail• RemoteTilt blinds install with standard installation hardware• RF motor is programmable with 1-channel and 5-channel versions
Note: The power source must be selected when ordering. The options are: reloadable and non-reloadable single or dual battery wand, and the plug-in transformer.
Radio Frequency (RF) RemoteTilt MotorMotor (Part #1000678)Headrail Adapter (Part #9014528)Tilt Hex Rod Adapter – Standard (Part #9014535)Tilt D Rod Adapter – Cordless Lift (Part #9014536)
Radio Frequency (RF) Remote Control (must order separately)Colour: 2 tone white and gray2 Types: programmable 1-channel and programmable 5-channel(1-Channel: Part #1810632)(5-Channel: Part #1810633)
Single Battery Wand (reloadable) and Installation Clips (IR or RF)Wand (Part #9014020) Clips (Part #9013263)8 AA Lithium Batteries (not shown) (Part #9014834)
Optional, Dual Battery Wand (reloadable) and Installation Clips (RF)(Clips: Part #9013263)(Wand: Part #9014020) x2(Y-Harness: Part #9015580)(Y-Harness Ext. Cable: Part #9016374)
Transformer (RF)(Part #1822192)
Battery Wand Extension Cables (RF)Colour: White(10” Cable: Part #9013282)(48” Cable: Part #9013279)(96” Cable: Part #9013277)
Wireless Wall Switch (RF)Colour: white2 Types: programmable 1-channel and 5-channel(1 Channel: Part #1810897)(5 Channel: Part #1810813)
• Fully concealed motor unit• Flexible and programmable operation• 12 Volt System
• Controls tilting operation• Programmable features• Easy blind tilting up to 90 feet away• 5-channel remote allows for multiple and independent blind operation
• On initial blind orders, the reloadable wand comes with 8 AA lithium batteries• Comes with wall mounting installation clips• For parts ordering the reloadable wand including 8 AA lithium batteries, order both part #s• Replacement 8 AA lithium batteries may also be ordered separately
• On initial shade orders, the reloadable wands come with 16 AA lithium batteries• Combines (reloadable) Single Battery Wands for extended life• Comes with wall mounting installation clips
• Plug-in operation, no batteries required• Works in standard wall outlet (comes with 25’ wire)
• Available in 10”, 48” and 96”• Allows battery wand installation away from headrail
• Control wireless operation from the wall up to 90 feet away• Works like turning a light on/off
• Program operation based on pre-set times• Excellent home security feature
May 2016
FWB-22 April 2016
Faux Wood Blinds
2” & 2 1/2” Faux Wood Control Charts – Remotetilt Automation System (Charts 4 to 7)
CONTROLS
• Lift cords are colour coordinated with slats• Standard lift cord length = 1/2 blind height• TILT funtion is motor controlled from remote unit
CONTROL POSITIONS:Lift Cord right (standard) or left
MIN. WIDTH
12”
LADDER/TAPE* PLACEMENT CHARTS
• 2” and 2 1/2” Blinds
The following charts show the number of ladders based on the width of the blind.
STACK-UP CHART (APPROXIMATE)
• Headrail + Bottomrail
The following charts show the stacking height of the slats when the blind is fully raised. Add in headrail and bottomrail for total.
2” & 2 1/2” FAUX
BLIND HEIGHT STACK HEIGHT + 2 1/2”
48” 5”72” 7 1/2”84” 9 1/4”96” 10 7/8”
2” & 2 1/2” FAUXBLIND LENGTH # OF LADDERS
12” to 18” 218 1/8” to 24” 224 1/8” to 36” 336 1/8” to 48” 448 1/8” to 60” 560 1/8” to 72” 672 1/8” to 84” 784 1/8” to 96” 8
FWB-23April 2016
Faux Wood Blinds
Faux Wood Blind Measuring and Maintenance Information
Accurate measurements are essential . Using a metal tape measure, round all measurements down to the nearest 1/8 inch . Blinds can be installed inside window frame or positioned outside of window frame .
Measuring for Inside Installation (IB)Width:Measure the exact distance between the inside of the window frame on one side to the inside frame of the other side . Measure in three locations and take the narrowest of these measurements to the nearest 1/8” . Take the diagonal measurement to ensure that the window is square . The factory will make necessary deductions if blind is ordered as a tight measure . Length:Measure from the top inside surface of the window frame to the top of the window sill . Measure the length down to point where blind is to reach .
Measuring for Outside Installation (OB)Before taking any outside measurements determine the area the blind is to cover . Check to see that there are no window cranks, handles etc . to interfere with blind operation .Width:Lightly mark with a pencil the desired bracket locations (outer ends of blinds) . Measure the width at the level where the brackets will be installed . Be sure the width dimension includes a minimum of 1” overlap at each side of window to ensure privacy . Blinds will be made exactly to the measurement supplied .Length:Measure the distance from the desired bracket position to the point where the bottom of blind will extend . Be sure to allow a minimum of 1” overlap at both top and bottom of window to ensure privacy .
Care & CleaningLike any piece of fine furniture, wood blinds must be dusted regularly . Use an ordinary clean cloth, feather duster or slightly damp cloth for this purpose . Most vacuum cleaners come with a round, soft brush attachment, which can be periodically run over the slats . It is best to clean the slats in the closed position . Do not wash the blinds! The wood may absorb water and as a result, may warp .
outs
ide
mou
nt
outside mount
Measuring Information
Inside Mount:WidthMeasure the smallest inside width . Measure the diagonal to confirm that the window is square .
LengthMeasure the length of the window sill from the top of the opening to the bottom of the sill .
Outside Mount:We suggest a minimum of 1” overlap on each side of the window to provide good coverage .
WidthThe exact width for the blind after you have added for overlaps .
LengthUse the length from the top of the headrail to the bottom of the shade after you have added for overlaps .