Featured Products Catalog - Implant Direct · Featured Products Catalog Implant Components. ... stored in a retrievable system, ... Stainless Steel 54-350015 Implant Analog Select
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Compatible Implant Components to fit IMZ 3.3 • Steri-Oss • Screw-
Burlingame, California 94010 USAT 800-999-3003T 650-340-0393F 650-340-8423
www.attachments.com
FPC US rev 0 2-3-10 web
All product names referenced herein are trademarks of their respective companies.Attachments International, Inc. is not affiliated or associated with any of the
TRADEMARKS / AFFILIATIONS:Attachments International, Inc.'s (“Aii”) components are available for use with a variety of implant systems of other manufacturers. Special mention is madein this catalog of Attachments International, Inc.'s components that are available and compatible for Straumann® ITI®, IMZ™, Biomet®3i®’s Osseotite®,Miniplant® & Nanotite®, and Zimmer® Screw-Vent®, Zimmer® Tapered Screw-Vent®, and Nobel Biocare®’s NobelReplace®, Nobel Biocare®Branemark®, NobelReplace® Select implant systems. These implant names and implant manufacturers and all others mentioned in the catalog are trade-marks of their respective manufacturer and not of Attachment International, Inc.Attachments International, Inc. is not affiliated or associated with any of the following companies: Staumann® ITI®, Nobel Biocare®, Zimmer Dental®,IMZ™, Zest Anchors® and Biomet® 3i®.
BioHorizons® is a federally registered trademark of BioHorizons Implant Systems, Inc., Birmingham, ALBiomet® is a federally registered trademark of Biomet, Inc.3i® is a federally registered trademark of Biomet 3i, LLC, Palm Beach Gardens, FLCertain® & Certain® PREVAIL® are federally registered trademarks of Biomet 3i, Warsaw, INOsseotite® is a federally registered trademark of Biomet 3i, LLC, Palm Beach Gardens, FLMiniplant® is a federally registered trademark of Biomet 3i, LLC, Palm Beach Gardens, FLNanotite® is a federally registered trademark of Biomet 3i, LLC, Palm Beach Gardens, FLIMZ™ is a common law trademark of IMZ GmbH, Germany.Locator® is a federally registered trademark of Zest Anchors, Inc.Nobel Biocare® is a federally registered trademark of Nobel Biocare Services AG, Zurich, Switzerland.Branemark™ is a common law trademark of Nobel Biocare AG, Zurich, Switzerland.NobelReplace ® is a federally registered trademark of Nobel Biocare AB JOINT STOCK COMPANY, SwedenStraumann® is a federally registered trademark of Straumann Holding AG Corp, Switzerland ITI® is a federally registered trademark of Straumann Holding AG Corp, Switzerland
Zimmer ® Screw-Vent®, & Zimmer ® Tapered Screw-Vent® are federally registered trademarks of Zimmer Dental, Inc., Carlsbad, CAZimmer® is a federally registered trademark of ZimmerTechnology, Inc., Warsaw, IN
At Attachments International we manufacture the highest quality compatible components for the industry’s most recognized implantsystems.
To maintain this high quality, all our parts are manufactured in accordance with FDA and ISO 13485:2003 standards.
This catalog showcases a selection of our most popular implant components drawn from the thousands of items that AttachmentsInternational distributes world-wide.
We look forward to partnering with you and providing greater optionsfor your dental implant and attachment cases.
Sincerely,The Staff of Attachments International, Inc.
Attachments International, Inc.824 Cowan RoadBurlingame, California, USA 94010-1205
800-999-3003 Order Department650-340-0393 Customer Service650-340-8423 Facsimile650-340-1426 Tech Support
Brånemark™ System (External Hex)UCLA GOLD Cylinders for 4.1 platform onlyUCLA Hex GOLD Cylinder, red plastic extension with Uni-Torx Ti Screw & plug 44-000507
UCLA Non-Hex GOLD Cylinder, white plastic extension with Uni-Torx Ti Screw & plug 44-000557
*NOTE: Uni-Torx Screw can be seated with Uni-Grip instrumentation.
UCLA Gold & Plastic CylindersThe UCLA abutment system is the most widely used restorative concept. Each UCLAabutment includes a castable plastic abutment, screw, and occlusal plug (CSP-cylinder,screw & plug). The precision machined UCLA Gold Cylinders are available for singletooth, bridge and bar restorations.
The melting temperature of the gold cylinder is 2552 – 2714 Fahrenheit or 1400-1490Celsius. The gold cylinders are made of a 58% gold alloy.
BIC™ Implant Analog 4.1 Internal Hex, Aluminum 52-400015
BIC™ Implant Analog 5.0 Internal Hex, Aluminum 52-500015
Implant AnalogsAnalogs are used for the fabrication of a master model. They are replicasof the implant or tissue extension. All analogs are made of high gradestainless steel.
Titanium Bases for Zirconia AbutmentsTitanium Base for custom-made zirconia abutments includes a plastic waxing sleevethat can be contoured with wax or composite and then scanned. State-of-the-artCAD/CAM technology is used to manufacture the zirconia abutments that arecemented to the titanium bases. The assembled abutment has the dual advantage ofa machined titanium close-tolerance fitting surface with the implant and with the tita-nium retaining screw. The Ti base is available with a color-coded plastic waxingsleeve and either an .050 Hex or Uni-Torx/Grip screw or guide pin.
Direct Titanium Posts, 1 piece, 5.5mm height 33-501255
Direct Titanium Posts, 1 piece, 7.0mm height 33-501270
Direct Titanium PostsDirect t i tanium two piece abutment posts engage the implant for anti-rotation. Angled Abutments for the Branemark and Tapered Screw-Ventcompatible implants are available in 15 or 25 degrees. They are indicated fordivergent implants and include an .050" hex screw .
Octabutment Impression Coping & Star Guide Pin Transfer thread timing 33-500099
Octabutment Analog, Stainless Steel 33-500015
Temporary Titanium Octagon Cylinder & Star screw 33-500309
Temporary Titanium Non-octagon Cylinder & Star screw 33-500359
Octagon Plastic Cylinder (blue) & Star screw 33-500209
Non-Octagon Plastic Cylinder (white) & Star screw 33-500259
Octabutment Protector Cap & Star screw 33-502109
Octabutment ComponentsThe Octabutment was designed for screwretained single tooth or bridge restorations. TheOctabutment has an external octagon and atapered mating surface that securely locks withthe implant when torqued into place.
Components—To Fit IME and Modified IME / Tissue ExtensionIME 3.3 & 4.0 Tapered Impression Coping Transfer thread timing 56-000080
IME 3.3 & 4.0 Analog, Brass (for IME & Modified IME) 56-000015
IME 3.3 CSP, Non-Engaging Cylinder, .050" Hex Screw, Plug 56-300252
IME 4.0 CSP, Non-Engaging Cylinder, .050" Hex Screw, Plug 56-400252
IMZ Overdenture AttachmentsDalla Bona 3.3 Male only, 2mm 56-343023
Dalla Bona 4.0 Male only, 2mm 56-443023
Allegro, Implant Female Kit (alternative for Dalla Bona female) 40-730002includes Metal housing, 4 Females, Spacer & Brass Analog
Dalla Bona, Implant Ti Female Kit, includes Female, Spacer & Analog 40-430002
ORS 3.3 Male only, 2mm 56-344023
ORS 4.0 Male only, 2mm 56-444023
ORS, Implant Female Kit, includes Retainer Ring, Analog & 3 red, 3 white O-Rings 40-440002
IMZ™ Non-Hex 3.3 & 4.0Compatible ComponentsAttachments International is the exclusiveworldwide distributor of authentic IMZcomponents.
Internal Non-Hex 3.3 & 4.0
IMZ - Original
9
Nobel Biocare® CompatibleSelect (Internal Tri-Channel Connection)
Compatiblity / Description REF #
HADER-EDS KITSHader-EDS Master Kit includes 6 clips, 6 housings, 2 seating tools, 2 short plastic bars 99-531005
Hader-EDS Bar Kit includes 6 clips, 6 fabricating clips, 2 seating tools, 2 short plastic bars 99-531000
BARS ONLYHader-EDS Bar, short plastic (6) Green 99-531030
Hader-EDS Bar, short titanium (1) Silver 99-531035
Hader-EDS Bar, short gold (1) Gold (Not avaolable for export) 99-531036
HADER-EDS PARTSHader-EDS Combo Clips 99-531009
Compatiblity / Description REF #
Biomet ® 3i® Compatible Miniplant,® Osseotite® & Nanotite® (External Hex)Dalla Bona, male only, for 3i 5.0 H=2mm (tissue heights 1-7mm available for all sizes) 51-543023
Allegro, Implant Female Kit (alternative for Dalla Bona female) 40-730002includes Metal housing, 4 Females, Spacer & Brass Analog
Dalla Bona, Implant Ti Female Kit, includes Female, Spacer & Analog 40-430002
ORS, male only, for 3i 5.0 H=2mm (tissue heights 1-7mm available for all sizes) 51-544023
ORS, Implant Female Kit, includes Retainer Ring, Analog & 3 red, 3 white O-Rings 40-440002
Straumann® CompatibleITI® StandardDalla Bona, male only H=0mm (0mm tissue height only) 33-543003
Allegro, Implant Female Kit (alternative for Dalla Bona female) 40-730002includes Metal housing, 4 Females, Spacer & Brass Analog
Dalla Bona, Implant Ti Female Kit, includes Female, Spacer & Analog 40-430002
ORS, male only H=0mm (0mm tissue height only) 33-544003
ORS, Implant Female Kit, includes Retainer Ring, Analog & 3 red, 3 white O-Rings 40-440002
To Order: 800-999-3003 • 650-340-0393 Additional Information: www.attachments.com
Dalla Bona ORS
Allegro Implant Female KitAlternative for DB
External HexConnection
Hader-EDS Bar SystemThe Hader-EDS Bar System is indicated for patient removable bar restorations for natural teeth and implants.
Internal Non-OctagonMorse Taper
11
Compatiblity / Description REF #
Nobel Biocare™ CompatibleSelect (Internal Tri-Channel Connection)Dalla Bona, male only, 3.5 SD H=2mm (tissue heights 1-7mm available for all sizes) 54-354323
Dalla Bona, male only, 4.3 MD H=2mm 54-434323
Dalla Bona, male only, 5.0 WD H=2mm 54-504323
Allegro, Implant Female Kit (alternative for Dalla Bona female) 40-730002includes Metal housing, 4 Females, Spacer & Brass Analog
Dalla Bona, Implant Ti Female Kit, includes Female, Spacer & Analog 40-430002
ORS, male only, 3.5 SD H=2mm (tissue heights 1-7mm available for all sizes) 54-354423
ORS, male only, 4.3 MD H=2mm 54-434423
ORS, male only, 5.0 WD H=2mm 54-504423
ORS, Implant Female Kit, includes Retainer Ring, Analog & 3 red, 3 white O-Rings 40-440002
Brånemark™ System (External Hex)Dalla Bona, male only, 3.5 NP H=2mm (tissue heights 1-3mm) 44-334323-NP
Dalla Bona, male only, 4.1 RP H=2mm (tissue heights 1-10mm) 44-430023
Dalla Bona, male only, 5.1 WP H=2mm (tissue heights 1-7mm) 44-543023-WP
Allegro, Implant Female Kit (alternative for Dalla Bona female) 40-730002includes Metal housing, 4 Females, Spacer & Brass Analog
Dalla Bona, Implant Ti Female Kit, includes Female, Spacer & Analog 40-430002
ORS, male only, 3.5 NP H=2mm (tissue heights 1-3mm) 44-334423-NP
ORS, male only, 4.1 RP H=2mm (tissue heights 1-10mm) 44-440023
ORS, male only, 5.1 WP H=2mm (tissue heights 1-7mm) 44-544023-WP
ORS, Implant Female Kit, includes Retainer Ring, Analog & 3 red, 3 white O-Rings 40-440002
Zimmer® & BioHorizons® CompatibleTapered Screw-Vent® & BioHorizons® InternalDalla Bona, male only, SD H=2mm (tissue heights 1-7mm available for all sizes) 49-343023
Dalla Bona, male only, MD H=2mm 49-443023
Allegro, Implant Female Kit (alternative for Dalla Bona female) 40-730002includes Metal housing, 4 Females, Spacer & Brass Analog
Dalla Bona, Implant Ti Female Kit, includes Female, Spacer & Analog 40-430002
ORS, male only, SD H=2mm (tissue heights 1-7mm available for all sizes) 49-344023
ORS, male only, MD H=2mm 49-444023
ORS, Implant Female Kit, includes Retainer Ring, Analog & 3 red, 3 white O-Rings 40-440002
Overdenture Stud Type Attachments Two types of overdenture attachments are most commonly used to directlyscrew into the compatible implant—the Dalla Bona and the ORS, (O-Ringsystem). Connectors are made of titanium. Dalla Bona males and ORSmales are sold separately by tissue height. The DB Female Kit includes 1 adjustable female, 1 spacer and 1 brass analog. The Allegro Female Kitis offered as an option for the Dalla Bona System. The ORS Female Kitincludes 1 gold plated retainer ring, 3 white final & 3 red processing O-Rings and 1 brass analog.
To Order: 800-999-3003 • 650-340-0393 Additional Information: www.attachments.com
Dalla Bona ORS
Allegro Implant Female KitAlternative for DB
InternalTri-ChannelConnection
External HexConnection
Internal Hex Connection
10
WD5.7
WD5.7
MD4.7
SD3.75
MD4.0
SD3.3
WD5.0
WD6.0
MD4.3
SD3.5
Female Male Complete
TissueHeight
TriangularInsertion
Nobel Biocare® CompatibleSelect (Internal Tri-Channel Connection)Locator Females Tissue HeightLocator Implant Female only H=0mm 63-008756 63-008761 n/a n/aLocator Implant Female only H=1mm 63-008757 63-008762 63-008766 n/aLocator Implant Female only H=2mm 63-008758 63-008763 63-008767 n/aLocator Implant Female only H=3mm 63-008759 63-008764 63-008768 n/aLocator Implant Female only H=4mm 63-008760 63-008765 63-008769 n/a Locator Implant Female only H=5mm 63-008734 63-008753 63-008770 n/aLocator Implant Female only H=6mm 63-008735 63-008754 n/a n/a
Zimmer ® & BioHorizons ® CompatibleTapered Screw-Vent® & BioHorizons® InternalLocator Females Tissue HeightLocator Implant Female only H=0mm 63-008661 63-008671 n/a n/aLocator Implant Female only H=1mm 63-008662 63-008672 63-008190 63-008180Locator Implant Female only H=2mm 63-008663 63-008673 63-008191 63-008181Locator Implant Female only H=3mm 63-008664 63-008674 63-008192 63-008182Locator Implant Female only H=4mm 63-008665 63-008675 63-008193 63-008183Locator Implant Female only H=5mm 63-008625 63-008627 63-008194 63-008184Locator Implant Female only H=6mm 63-008626 63-008628 63-008195 63-008185
IMZ™ CompatibleLocator Females Tissue HeightLocator Implant Female only H=0mm 63-008820 63-008830Locator Implant Female only H=1mm 63-008820-1 63-008830-1Locator Implant Female only H=2mm 63-008820-2 63-008830-2Locator Implant Female only H=3mm 63-008820-3 63-008830-3Locator Implant Female only H=4mm 63-008820-4 63-008830-4Locator Implant Female only H=5mm 63-008820-5 63-008830-5
Locator Males for all femalesLocator Male Complete 63-008519Includes 1 metal housing with a black nylon processing male, spacer, 3 final nylon males: 1 clear 5 lbs, 1 pink 3 lbs & 1 blue 1.5 lbs retentionLocator Extended Range Male Complete 63-008540Includes 1 metal housing with a black nylon processing male, spacer, green nylon ex range male 3 lbs retention, orange nylon ex range male 2 lbsretention and red ex range male 1.5 lbs retentionLocator Replacement Males Inserts, retention 5 lbs, clear (4) 63-008524Locator Replacement Males Inserts, retention 3 lbs, pink (4) 63-008527Locator Replacement Males Inserts, retention 1.5 lbs, blue (4) 63-008529Locator Extended Range Replacement Male, 3 lbs retention, green (4) 63-008547Locator Extended Range Replacement Male, 2 lbs retention, orange (4) 63-008915Locator Extended Range Replacement Male, 1.5 lbs retention, red (4) 63-008548Locator Impression Male 63-008505Locator Female Analog Standard 4mm (Also available in 5mm) 63-008530
Locator® Overdenture Attachments Locator overdenture attachments screw directly into the implant. TheLocator titanium female is sold separately by tissue height. The LocatorMale Complete includes: 1 clear male (5 lbs. retention), 1 pink male (3 lbs. retention), 1 blue male (1.5 lbs. retention), a metal housing withblack processing male and spacer. (All Locators are not for export.)
NOTE: MALE COMPLETE IS SOLD SEPARATELY (63-008519)
InternalTri-ChannelConnection
Internal Hex Connection
Internal Non-Hex 3.3 & 4.0
Please visit www.attachments.com for a complete list of Locator abutments.
To Order: 800-999-3003 • 650-340-0393 Additional Information: www.attachments.com
12
Terms and Conditions of SaleThese terms and conditions of Attachments International, Inc. also known as Aii supersede
any terms and conditions of customer where inconsistent.Return Policy:
An RMA number is required PRIOR to returning product. Call 800-999-3003 for your Return Authorization Number.All returns subject to inspection prior to acceptance.All returns will be credited to customer's open account.All returns 61 days and over from invoice date will have a 50% restocking fee applied, no exceptions.No returns after 180 days - no exceptions.Customers may return Aii products within 60 days from the invoice date with no fee under the following conditions:
a. An RMA number has been obtained PRIOR to returning product.b. Product is in its original unopened packaging.c. A copy of the original invoice is included. d. All opened packages received within 60 days of invoice date will be subjected to inspection and a 50%
restocking fee. All products must be in resalable condition.NOTE: Original freight cost is non-refundable. Return freight cost is the customer's responsibility.
Returns will not be accepted if any of the following apply:a. If product is used or damaged, merchandise may be returned to customer.b. If freight is charged to Aii's account with FedEx, UPS (or any other carrier).c. If boxes /packaging are opened, merchandise may be returned to customer.d. All opened packages received within 60 days of invoice date will be subjected to inspection and a 50%
restocking fee. All products must be in resalable condition.
Return Instructions:a. Wrap package securely and send in either a box or padded envelope.b. DO NOT SEND MERCHANDISE IN A LETTER ENVELOPE. (Aii will not be held responsible for its contents).c. Write your RMA number clearly on outside of package to expedite return. d. Insure your return merchandise accordingly.e. Attachments International is not responsible for any lost or damaged products returned to us.f. Send return to: Attachments International, Returns Dept., 824 Cowan Road, Burlingame, CA 94010
Return Fees:Returns 0 to 60 days from invoice date will be charged a 50% restocking fee only if package has been opened.Returns 61 days and over from invoice date will have a 50% restocking fee applied, no exceptions.COD packages refused by customer will be charged Shippers Return Fee.
Orders / Backorders:An order from the customer is not deemed accepted until product is shipped by Attachments International or placedon backorder by Attachments International. Items on backorder will appear in the backorder column on the front ofthe invoice. Every effort will be made to notify the customer of a backorder or delay in shipment.
Special Orders:Special order items can not be returned for credit or exchange.
Payment: Visa, Master Card, American Express accepted. Net 30 accounts may be established upon approval. Net 30 payment isdue in full within 30 days of invoice date.
Service Charges:Service charges / Finance charges of 11/2% per month, 18% per annum, will be implemented on balances carried over30 days from invoice date.
Warranty:Customer is limited to replacement of product if there is any defect in the product. Attachments International makes no warranty of any kind, expressed or implied, concerning the product. Customer waives the right to any consequential or incidental damages of any nature. Customer agrees to indemnify and hold AttachmentsInternational, and it's offices, directors, employees, and agents, harmless from any claim of customer's end user for any alleged defect in the product.
Shipments:Attachments International is not responsible for any delays in shipment caused by the courier.
Discrepancies:Be sure to check your purchase immediately upon receipt.Any discrepancies must be reported to our office within 48 hours of receipt of shipment.Shippers Return Fee will be charged to customers account if COD packages are refused by customer.
Attorneys Fees:Customer agrees to pay reasonable attorneys fees and cost of collection, whether action is filed or not.
www.attachments.com 4.3.15 Rev D Terms & Conditions 13