FDT120423_Lieferprogramm_2012_ENG

Product range 2012

2

Rhepanol®fk

Rhepanol®hg

Rhepanol®

Rhenofol®

Flat roof accessories

Service

Contents

Rhepanol® fk Roofing membranes with self-sealing edge p. 3

Accessories for Rhepanol fk with self-sealing edge p. 5

Rhepanol® hg Roofing membrane, protection layer p. 8

Accessories p. 9

Rhepanol® Accessories p. 10

Protection and separation layer,

vapour control layer p. 12

Bonding system Rhepanol fk p. 13

Tools p. 14

Rhenofol® Roofing membrane p. 15

Strip and paste system incl. accessories p. 17

Accessories p. 18

Protection and separation layer,

vapour control layer p. 21

Application tools p. 23

Flat roof accessories FDT VarioGully p. 24

Accessories FDT VarioGully p. 26

FDT RWE rainwater outlet,

through wall outlet, emergency overflow p. 28

FDT flat roof accessories p. 30

FDT wall connection profiles p. 32

FDT roof edge trim p. 33

FDT gravel stop profiles p. 34

Service Request for wind uplift calculation p. 35

Request for drainage equipment calculation p. 36

Order example for Rhepanol fk p. 37

Order form for Rhepanol fk p. 38

FDT – legal notice p. 39

3

Rhepanol®fk

Rhepanol® fkRhepanol fk is made of polyisobutylene (PIB) with a prefabricated

self-sealing edge and an integrated synthetic fleece backing.

The sealing edge makes it easier to seal the seams and provides

a permanently secure joint. The fleece backing provides additional

protection against stresses originating from the substrate.

Furthermore, the fleece backing allows diffusion and ensures

secure fastening onto the substrate.

10 10 430 grey 2.5 15 x 1.05 2.60 41 610 10 440 grey 2.5 10 x 1.05 2.60 27 710 10 650 grey 2.5 15 x 0.65 2.60 26 910 10 550 grey 2.5 15 x 0.52 2.70 21 1210 10 540 grey 2.5 15 x 0.35 2.80 15 18

10 10 400 black 2.5 15 x 1.05 2.60 41 610 10 405 black 2.5 10 x 1.05 2.60 27 710 10 360 black 2.5 15 x 0.65 2.60 26 910 10 340 black 2.5 15 x 0.52 2.70 21 1210 10 320 black 2.5 15 x 0.35 2.80 15 18

Product code Colour Thickness1) Delivery form Weight Weight Rolls permm rolls kg/m2 kg/roll europallet

Length x width (m)

One roofing membrane for all application methods

Mechanically fastened with Gripfix system Bonded fixing with Rhepanol adhesive 90Loose-laid with ballast

Note:Custom-made lengths of Rhepanol fk, 1.05 m wide, can be supplied. Delivery time and price on request. Min. length: 10 m; max. length: 25 m.Europallets must be charged. Please observe current manufacturer application instructions and national standards and regulations.

Roofing membranes

1) Thickness includes 1 mm fleece backing.

4

Rhepanol®fk

10 10 580 grey 1.5 15 x 1.05 2.40 39 810 00 500 grey 1.5 15 x 0.52 2.40 20 16

10 00 202 black 1.02) 20 x 1.05 1.60 35 810 00 302 black 1.5 15 x 1.05 2.40 39 810 00 240 black 1.5 15 x 0.52 2.40 20 1610 00 220 black 1.5 15 x 0.35 2.40 13 2410 00 402 black 2.0 10 x 1.05 3.20 35 8

10 10 470 grey 2.5 15 x 1.05 2.70 43 610 10 690 grey 2.5 15 x 0.65 2.80 28 910 10 590 grey 2.5 15 x 0.52 2.80 22 1210 10 570 grey 2.5 15 x 0.35 2.90 15 1810 10 560 grey 2.5 15 x 0.25 3.00 12 24

10 12 500 black 2.5 15 x 1.05 2.70 43 610 12 800 black 2.5 15 x 0.65 2.80 28 910 12 750 black 2.5 15 x 0.52 2.80 22 1210 12 700 black 2.5 15 x 0.35 2.90 15 1810 12 600 black 2.5 15 x 0.25 3.00 12 24

Rhepanol fRhepanol f is made of polyisobutylene (PIB) without prefabricated sealing edge and fleece backing.

For individual detail forming and collars to be formed on site and as a membrane for structural waterproofing according to

DIN EN 13967.


Length x width (m)

Rhepanol fk with double-sided self-sealing edgeFor parapet flashing and expansion joints.


Length x width (m)

1) Thickness includes 1 mm fleece backing.2) Rhepanol f 1 mm: Non-waterproofing membrane, use only for specific purposes.

Roofing membranes

Note:Other colours are possible, delivery time and price on request.Custom-made width for Rhepanol f is possible. Delivery time and price on request.

5

Rhepanol®fk

Accessories for Rhepanol fk with self-sealing edge

Rhepanol cover tapeWith self-sealing edge system as sealing tape on Rhepanol f backing. For cross joints and flashings at Rhepanol fk roofing membrane.

10 05 500 grey 25 x 0.10 210 05 510 grey 25 x 0.15 110 05 520 grey 25 x 0.20 110 05 530 grey 25 x 0.35 1

10 05 000 black 25 x 0.10 210 05 100 black 25 x 0.15 110 05 200 black 25 x 0.20 110 05 400 black 25 x 0.35 1

10 05 540 grey 10 x 0.35 110 05 410 black 10 x 0.35 1

Rhepanol fk internal corner 90°With self-sealing edge system.

Preformed detail for sealing internal corners at roofing membrane Rhepanol fk.

10 14 480 grey 2510 14 450 black 25

Rhepanol fk internal corner 90° rapidWith self-sealing edge system.

Internal corner with integrated cover tape strips.

For flashing strip to project more than 150 mm onto the roof area.

10 35 940 grey 510 35 900 black 5

Rhepanol fk external corner 90°With self-sealing edge system.

Preformed detail for sealing external corners at roofing membrane Rhepanol fk.

10 14 580 grey 2510 14 550 black 25

Rhepanol fk universal roof light cornerWith self-sealing edge system.

Preformed detail for sealing roof light corners at roofing membrane Rhepanol fk

for roof light kerb up to 73° slope.

10 35 510 grey 2010 14 650 black 20

Product code Colour Delivery form Piece per boxrollsLength x width (m)

6

Rhepanol®fk


Rhepanol fk roof light corner universal rapidWith self-sealing edge system.

Preformed detail for sealing roof light corners at roofing membrane Rhepanol fk

for roof light kerb up to 73° slope if the flashing strip runs from 150 mm to 250 mm

onto the horizontal area.

10 35 950 grey 2010 35 920 black 20

Rhepanol fk collarWith self-sealing edge system incl. Gripfix ring.

For reliable flashing of Rhepanol fk against FDT VarioGully.

Diameter 340 mm.

14 18 580 grey Rhepanol fk 1014 18 550 black Rhepanol fk 10

Rhepanol fk collar universalWith self-sealing edge system incl. Gripfix ring.

Preformed detail for built-in details and roof penetrations at roofing membrane Rhepanol fk.

Diameter 340 mm.

14 18 840 grey 1014 18 850 black 10

Rhepanol fk collar loose/fixed flangeFor all standard rainwater outlets with bolt connection (e.g. 6 holes).

Up to Ø 350 mm with self-sealing edge system and from Ø 350 mm on with Rhepanol f.

Required information when ordering: outlet type and manufacturer, number of holes, inner and

outer diameter. Use only according to regulations of manufacturer and with framing rings.

Delivery time on request.

14 18 900 grey, black

Rhepanol EPDM framing ringsFor flashing to loose/fixed flange rainwater outlets at Rhepanol fk.

One set consists of 2 framing rings per outlet.


14 18 910 grey

Product code Colour For flashing to Piece per box

7

Rhepanol®fk


Product code Colour Delivery form Weight Piece per box

Rhepanol pasteSolvent-based, single-component sealant on polyisobutylene base. For sealing T-joints (cross joints) on Rhepanol fk.

One cartridge for about 200 T-joints. For sealing of seams installed against the slope.

Consumption about 60 ml/m. Can be stored for at least 2 years.

10 12 430 grey 300 ml cartridge 1210 12 400 black 300 ml cartridge 12

Rhepanol solvent-welding agentSpecial solvent. For cleaning the seams of Rhepanol fk and for solvent welding of Rhepanol f. Consumption: about 10 to 30 g/m.

Also as thinner for Rhepanol contact adhesive 50, Rhepanol roof point and Rhepanol primer Precol.

Can be stored for at least 2 years.

10 11 450 1 l container (=̂ 0.78 kg) 1010 02 300 5 kg container

Rhepanol primer PrecolHigh-viscous pre-coat bonding agent for waterproof flashing of Rhepanol fk self-sealing edge to different materials, e.g. eave flashing.

Consumption: about 300 g/m2. Can be stored for at least 2 years

10 02 200 black 5 kg container

Rhepanol sealing tapeDouble-sided self-adhesive, good adhesion. For waterproof flashings of Rhepanol fk to various substrates such as concrete, coated

metal sheets and in connection with Rhepanol primer Precol.

10 01 100 black 50 x 0.04 5

Rhepanol paving tilesFor maintenance walkways on Rhepanol fk.

Providing safe grip and load distribution.

Fixing with the integrated self-sealing edge.

Thickness 9 mm with structured surface 4 mm.

14 50 050 anthracite/black1) 600 x 800 mm 4 kg/pc 90 pc

Rhepanol lightning conductor holder SnapFor flashing lightening conductors against Rhepanol fk roofing membrane.

Incl. collar with self-sealing edge.

Fixing with two screws on the underground.

14 66 000 grey Height 70 mm14 66 010 black Height 70 mm

1) Colour may differ.

Rhepanol®hg

8

Rhepanol® hgRoofing membrane made of polyisobutylene (PIB), meeting the

requirements of DIN EN 13956 and DIN EN 13697. Rhepanol hg,

like Rhepanol fk, is based on polyisobutylene (PIB) according to

DIN 16731. Rhepanol hg is reinforced with a central glass fleece.

Rhepanol is hot-air weldable without open flame. Furthermore

Rhepanol hg is root and rhizome resistant according to FLL

guidelines.

Suitable for extensive and intensive roof garden systems.

For sealing with Rhepanol hg in loose-laid build-ups with ballast you need the following layer:

FDT vapour control layer, thermal insulation layer, roofing membrane Rhepanol hg, drainage

and filter layer, vegetation mat, plants.

17 01 000 grey 1.5 15 x 2.05 1.70 54 917 02 000 grey 1.8 15 x 2.05 2.05 65 9

Rhepanol hFor detail work.

17 08 900 grey/black 1.8 20 x 0.50 2.0 2010 10 960 grey 1.5 15 x 0.15 1.65 4

Product code Colour Thickness Delivery form Weight Weight Rolls permm rolls kg/m2 kg/roll europallet

Length x width (m)

Rhepanol hg – loose-laid with roof garden build up

Loose-laid

Roofing membrane, protection layer

Note:Please observe current manufacturer application instructions and national standards and regulations.Europallets must be charged. If single rolls are ordered, we ask a surcharge of 13.50 euros per roll.For safe transportation rolls of 2.05 m width are delivered on 2 europalettes.

9

Rhepanol®hg

Product code Colour Delivery form Piece per box

Accessories Rhepanol hg

Rhepanol h internal corner 90°Preformed detail for internal corners at roofing membrane Rhepanol hg.

17 10 010 grey/black 90°

Rhepanol h roof light cornerPreformed detail for external corners and roof light corners at roofing membrane Rhepanol hg.

17 11 000 grey/black 90°17 12 000 grey/black 73°17 12 010 grey/black 60°

Rhepanol h collarPreformed detail for flashing FDT VarioGully on Rhepanol hg roofing membrane.

Diameter: 273 mm.

14 18 700 grey/black 10

Rhepanol h universal collarPreformed detail for built-in details and roof penetrations up to 250 mm

at roofing membrane Rhepanol hg.

Diameter 340 mm.

14 18 590 grey/black 20

Rhepanol h collar loose/fixed flangeFor all standard rainwater outlets with bolt connection (e.g. 6 holes).

Required information when ordering: outlet type and manufacturer, number of holes, inner and

outer diameter. Use only according to regulations of manufacturer and with framing rings.


14 18 990 grey/black

Rhepanol EPDM framing ringsFor flashing loose/fixed flange outlets on Rhepanol hg roofing membranes.

One set consists of 2 framing rings per outlet.


14 18 910 black

Rhepanol®

10

Accessories Rhepanol


Rhepanol coated metal sheetWith Rhepanol h laminated, hot-galvanised metal sheet with a green varnish backing.

For forming profiles for flashings and trims.

Can be cut and bent like galvanised steel sheets.

10 10 950 grey 30 units per stack 2 x 1 m x 1.4 mm sheet10 10 980 grey 30 units per stack 3 x 1 m x 1.4 mm sheet10 11 010 grey 30 x 1 m x 1.4 mm coil10 11 040 white 30 units per stack 2 x 1 m x 1.4 mm sheet

FDT adhesive tapeSpecial coated adhesive tape for forming joints and edged protection using Rhepanol coated metal sheet.

FDT adhesive tape does not clump together with the sealing edge of the cover tape.

10 10 970 50 x 0.038

Rhepanol Gripfix stripsHighly tear-resistant polyester base material with mushroom hooks. For fastening Rhepanol fk with Gripfix system. Fixing with fasteners

and washers of max. 50 mm width.

10 37 000 black 60 x 0.12 2

FDT sealant ASolvent-free single-component sealant on acrylate base. For flashings with wall connecting profile.

Consumption about 50 ml/m. Can be stored for at least 1 year.

12 65 200 grey 300 ml cartridge 12

FDT sealant SSingle-component sealant on synthetic rubber base. For flashings with wall connecting profile.

Consumption about 50 ml/m. Can be stored for at least 1 year.


Rhepanol primer 1 SBlue-coloured polymer solution. Primer for ferrous metals, concrete, render finish, timber and rigid PVC with Rhepanol contact adhesive 50.

Consumption about 150 to 250 g/m². Can be stored for at least 2 years.

15 00 900 blue 5 kg container

Rhepanol primer 2 STransparent polymer solution. Primer for non-ferrous metals and stainless steels with Rhepanol contact adhesive 50.

Consumption about 150 to 250 g/m². Can be stored for at least 2 years.

15 00 905 transparent 4.5 kg container

11

Rhepanol®

Product code Colour Forms of supply Box

Rhepanol contact adhesive 50For bonding roofing membranes Rhepanol fk/hg to concrete, timber, polyester, steel, etc.

Not suitable for polystyrene. Consumption about 500 g/m². Can be stored for at least 2 years.

17 30 030 4.5 kg container17 30 020 12 kg container

Rhepanol adhesive 9Acrylic-based dispersion adhesive. For bonding Rhepanol fk to shipboards and veneer boards on roof slopes up to 15°.

Consumption about 300 to 400 g/m². Can be stored for at least 1 year.

10 10 050 15 kg container

Rhepanol h seam cleanerFor cleaning the seams. Consumption about 10 g/m. Can be stored for at least 4 years.


Rhepanol h intensive cleaner 50For cleaning heavily soiled Rhepanol hg areas and for diluting Rhepanol contact adhesive 50.



FDT cleaning kitFor cleaning the seam with Rhepanol h seam cleaner and Rhepanol hg areas with Rhepanol h intensive cleaner 50.

The cleaning kit contains 150 absorbent cleaning tissues and 100 disposable PE gloves.

17 50 010

Rhepanol roof paintSpecial PIB-based roof paint. For a decorative coating of all Rhepanol membranes, also with Rhepanol fk standing seam profile.

Consumption about 0.25 l/m² (double paint coating). Can be stored for at least 2 years.

10 02 131 silver1) 5 l container10 02 132 copper1) 5 l container10 02 130 patinated copper1) 5 l container

Rhepanol fk standing seam profileWith self-sealing edge system. For a visually attractive imitation of standing seams on Rhepanol fk.

Necessary hand roller please see on page 14.

Incl. Rhepanol fk joint connection (1 pc/2 m).

Can be coated with Rhepanol roof paint.

14 80 500 grey 2 m 100 m

Rhepanol fk joint connectionRhepanol fk joint connection for additional joints on Rhepanol fk standing seam profile.

14 80 600 grey 10 pc per bag

Accessories Rhepanol

1) Other colours black and grey, special colours on request.

Rhepanol®

12

Protection and separation layer, vapour control layer Rhepanol

Product code Colour Thickness1) Delivery form Weight Weight Rolls/piece permm rolls kg/m2 kg/roll europallet/

Length x width (m) box

Rhepanol fk fire protection layerSpecial flame-retarding woven glass cloth with a weight of 175 g/m².

For mechanical fastening of Rhepanol fk with Gripfix on unbacked polystyrene thermal insulation.

10 10 920 white 100 x 2.00 0.175 42 12

FDT protection layerHighly perforation-resistant PIB membrane with polyester fleece backing but fleece-free welding edge.

17 09 000 black 1.81) 20 x 2.05 1.0 41 9

FDT synthetic fleece 300 g/m²Highly tear-resistant and thermally bound, drill-resistant and alkali-proof.2)

As protection layer for roof build-ups with Rhepanol fk and non-standard gravel.

12 60 000 white 50 x 2.25 0.30 36 9

FDT synthetic fleece 180 g/m²Highly tear-resistant and thermally bound, drill-resistant.

Levelling layer for old uneven bitumen roofs and on timber decks.

12 60 200 white 100 x 2.25 0.18 42 9

FDT vapour control layer fkPolyethylene foil with sd >_ 120 m. For loose-laid or mechanical fastened build-ups with Rhepanol fk roofing membrane in non-air-

conditioned rooms according to DIN 4108, part 3.

10 10 900 0.4 25 x 4.00 0.33 35 27

FDT vapour control layer alu-gv-skAluminium foil with polyester fabric reinforcement and adhesive coating according to DIN 18234, sd >1.500 m (practically vapour-proof).

12 90 670 0.5 100 x 1.50 0.28 34 7

FDT connection tapeSpecial adhesive agent on carrier foil.

Seam connection between FDT vapour control layer PE as well as for flashings and trims for FDT

vapour control layer PE on different substrates.

10 11 000 black 12 x 0.08 30

FDT seam tapeButyl adhesive agent fibre-reinforced.

Connection between FDT vapour barrier fk seams, in the overlap.

According to regulation DIN 18234-1.

10 11 100 grey 25 x 0.015 18

1) Incl. fleece backing.2) Other qualities on request.

FDT vapour controllayer PE/fk

FDT seam tape

FDT connection tape


13

Rhepanol®

FDT roofing membrane adhesiveLiquid, one-component polyurethane adhesive (FCK-free) for

striped or entire bonding of roofing membrane Rhepanol fk or

other fleece-backed membranes.

Not suitable for bonding of thermal insulation layers.

Can be stored for at least 1 year.


Rhepanol adhesive 90Liquid, solvent-based adhesive on synthetic rubber base.

For striped bonding of Rhepanol fk.


10 09 650 9 kg container 10 09 660 12 kg container 10 09 670 25 kg container

FDT adhesive ULiquid, one-component polyurethane adhesive, solvent-free,

free from FCKW. For striped bonding of thermal insulation layers

and bitumen membranes (vapour control layers).

Can be stored for at least 1 year.

10 09 500 6.5 kg container

FDT universal application trolleyFor Rhepanol adhesive 90 in completely drainable 25 kg container. Application width: 1 m.

With adapter also suitable for FDT adhesive U in 6.5 kg container and Rhepanol adhesive 90 in 9 kg container.

10 16 600 1 pc

FDT discharging funnelReplacement for discharging funnel of FDT universal application trolley.

10 16 620 1 pc

FDT adapterFor using FDT universal trolley for FDT adhesive U in 6.5 kg container and Rhepanol adhesive 90 in 9 kg container.

Application width: 1 m.

10 16 610 1 pc

FDT application trolley 1 mFor Rhepanol adhesive 90 in 9 kg container and FDT adhesive in 10 kg container

Application width: 1 m.

10 16 400 1 pc

Bonding system Rhepanol fk

Product code Delivery form

Consumption of Rhepanol adhesive 90

Consumption of FDT adhesive1)

1) For mineral fibre insulation materials, adhesive consumption is to be defined depending on the project.2) Not for tower style building. Not for exposed locations.3) With profiled steel decking, two adhesive stripes per corrugation.

Consumption of FDT adhesive U

Building height 2) Inner area Perimeter and Min. amount of corner areas DIN 1055 adhesive stripes3)/m

0 to 8 m 160 g/m2 220 g/m2 8

over 8 to 20 m 180 g/m2 250 g/m2 8


0 to 8 m 160 g/m2 240 g/m2 8

over 8 to 20 m 200 g/m2 280 g/m2 8


0 to 8 m 150 g/m2 200 g/m2 8

over 8 to 20 m 180 g/m2 250 g/m2 8

Rhepanol®

14

Tools Rhepanol

Rhepanol universal rollerSealing the longitudinal seams by rolling the Rhepanol universal roller over the self-sealing edge of

Rhepanol fk on the Gripfix strips.

10 10 600

Rhepanol metal hand roller4 cm wide. For rolling on the sealing joints with Rhepanol cover tape and accessories with self-sealing edge.

10 02 700

FDT metal hand roller small1 cm wide. For rolling on the sealing joints with Rhepanol cover tape and accessories with self-sealing edge difficult to access.

15 01 100

FDT Teflon roller3 cm wide. For rolling on the sealing joints with Rhepanol cover tape and accessories with self-sealing edge and for hot-air welded seams.

17 50 000

Rhepanol hand roller for standing seam profile

10 10 940

FDT felt rollerFor Rhepanol adhesive 9, Rhepanol contact adhesive 50 and roof paint.

10 12 000

FDT handheld pistolReinforced version for Rhepanol paste, FDT sealant S and A.

10 12 950

FDT scissors 250 mm High-quality reinforced metal scissors. For cutting Rhenofol.10 03 500

FDT welding brush 50 mm For solvent welding, priming and to apply adhesive.10 10 000

Product code

15

Rhenofol®

12 84 690 light-grey 1.2 20 x 2.05 1.47 63 912 83 090 light-grey 1.2 20 x 1.50 1.47 46 1112 82 670 light-grey 1.2 20 x 1.03 1.47 31 1512 80 420 light-grey 1.2 20 x 0.68 1.47 20 18

12 84 740 light-grey 1.5 15 x 2.05 1.85 59 912 84 450 light-grey 1.5 20 x 1.50 1.85 58 912 89 210 light-grey 1.5 20 x 1.03 1.85 38 912 89 220 light-grey 1.5 20 x 0.68 1.85 25 1512 87 530 light-grey 1.5 20 x 0.50 1.85 19 18

12 83 160 light-grey 1.8 15 x 2.05 2.25 71 912 84 420 light-grey 1.8 15 x 1.50 2.25 52 1112 83 460 light-grey 1.8 15 x 1.03 2.25 35 15

12 86 690 light-grey 2.0 15 x 1.50 2.48 57 9

12 85 050 anthracite1) 1.2 20 x 1.03 1.47 31 15

12 88 420 anthracite1) 1.5 20 x 1.50 1.85 58 9

Roofing membrane


Length x width (m)

Rhenofol CV – the roofing membrane for mechanically fixed roof build-ups

Rhenofol CV is a product made of non-rigid polyvinyl chloride (PVC-P), a synthetic

fibre-reinforced roofing membrane. Rhenofol CV is used for waterproofing in

mechanically fixed build-ups without ballast, especially for lightweight roofs.

Rhenofol®

Rhenofol is the versatile roofing membrane family made of

plasticised PVC. In practical use for decades Rhenofol combines

flexibility and cost-effectiveness for new buildings and refurbish-

ment. Available in different lengths, width up to 2.05 m and

various colours.

Always the right choice: Rhenofol CV for mechanically fixed

build-ups, Rhenofol CG for loosely laying with ballast or

Rhenofol C for waterproofing foundations and build-in details.

Note:Please observe current manufacturer application instructions and national standards and regulations.Europallets must be charged.If single rolls are ordered, we ask a surcharge of 13.50 euros per roll.For safe transportation rolls of 2.05 m width are delivered on 2 europalettes.

Mechanically fixed

1) Other FDT standard colours on request.

Rhenofol®

16

Roofing membrane

12 83 410 light-grey 1.2 20 x 2.05 1.54 65 912 83 470 light-grey 1.5 15 x 2.05 1.88 60 912 83 730 light-grey 1.8 15 x 2.05 2.28 71 912 86 600 light-grey 2.0 15 x 2.05 2.53 78 9


Length x width (m)

Rhenofol CG – the roofing membrane for loose laid application under ballast

Rhenofol CG is a product made of non-rigid polyvinyl chloride (PVC-P), a roofing

membrane with glass reinforcement. Rhenofol CG is used for waterproofing in

loose-laid applications under ballast with gravel or paving slabs, e.g. on terraces or

parking decks or under green roof systems.

Loose-laid with ballast

12 84 810 light-grey 1.2 15 x 2.05 1.52 49 1112 88 230 anthracite1) 1.2 15 x 2.05 1.52 49 11

12 83 810 light-grey 1.5 15 x 2.05 1.88 60 912 83 550 light-grey 1.5 15 x 1.03 1.88 30 15


Length x width (m)

Rhenofol C – the waterproofing membrane for detail works and for waterproofing foundationsRhenofol C is a product made of non-rigid polyvinyl chloride (PVC-P), un-reinforced waterproofing membrane.

For detail works with Rhenofol CV/CG roofing membranes and for waterproofing foundations according to DIN 18195.


Note:Please observe current manufacturer application instructions and national standards and regulations.Europallets must be charged.If single rolls are ordered, we ask a surcharge of 13.50 euros per roll.For safe transportation rolls of 2.05 m width are delivered on 2 europalettes.

17

Rhenofol®

FDT PE container coverFor installing the stirring mechanism, for covering the container and preventing sparks falling into if from possible electrostatic charge.

12 84 150

FDT stirrerFor connection a drilling machine for stirring the Rhenofol welding paste SB.

12 84 110

FDT plastic funnelFor easy discharge of the stirred welding paste into the FDT PE bottle.

12 84 130

FDT PE bottle 1 lFor easy application of the Rhenofol welding paste SB onto Rhenofol CV sets or strips.

12 84 120

Accessories for Rhenofol strip and paste system

Product code

Strip and paste system Rhenofol

Rhenofol welding paste SBPaste-like solvent mixture consisting of THF and non-rigid PVC.

For a position-stable connection of roofing membranes Rhenofol CV with mechanically fixed

Rhenofol CV sets or strips.

Can be stored for at least 8 months.

12 86 300 white 10 kg container

Rhenofol CV stripRhenofol CV strip material, 100 mm or 150 mm wide and 50 m long.

For linear fastening of Rhenofol CV with welding paste system.

Amount and arrangement of strips according to FDT wind uplift calculation.

12 86 180 light-grey 50 m x 0.15 m12 86 190 light-grey 50 m x 0.10 m

Rhenofol CV setsDisc made of Rhenofol CV with a diameter of 180 mm.

For point fastening of Rhenofol CV with welding paste system.

Amount and arrangement of sets according to FDT wind uplift calculation.

12 83 870 light-grey punched 30012 84 170 light-grey unpunched 300


Rhenofol®

18

Rhenofol internal corner 90°Preformed Rhenofol C detail for sealing internal corners at Rhenofol roofing membranes.

12 80 880 light-grey12 88 240 anthracite1)

Rhenofol external corner 90°Preformed Rhenofol C detail for sealing external corners at Rhenofol roofing membranes.

12 80 960 light-grey12 88 250 anthracite1)

Rhenofol external corner for roof lights (see fig. for Rhenofol external corner 90°)

Preformed Rhenofol C detail for sealing external corners for roof lights at Rhenofol roofing membranes.

12 61 100 light-grey 45°12 80 990 light-grey 60°12 81 010 light-grey 73°

Rhenofol collarFor secure flashing of Rhenofol roofing membranes to FDT VarioGully.

Diameter 273 mm.

14 18 800 light-grey Rhenofol 1014 18 940 anthracite1) Rhenofol 10

Rhenofol collar universalFor built-in details and roof penetrations up to 250 mm for Rhenofol CG/CV roofing membranes.

Diameter 340 mm.

14 18 960 light-grey Rhenofol 20

Rhenofol collar loose/fixed flangeFor outlets with bolt connection (6 or 8 holes). Required information when ordering: outlet type

and manufacturer, number of holes, inner and outer diameter. Use only according to regulations

of manufacturer and with framing rings.


14 18 920 light-grey


Product code Colour Forms of supply For flashing to Piece per box

Accessories Rhenofol

19

Rhenofol®


Rhenofol C framing ringFor flashing against loose/fixed flange rainwater outlets at Rhenofol sealings.

One set consists of 4 rings per gully.


14 18 930 light-grey

Rhenofol standing seam profileFor decorative imitation of standing seam profiles on Rhenofol CV in the height of 25 mm and 50 mm.

Necessary metal roller for height 25 mm see page 14.

Length of standing seam profiles 4 m.

14 80 000 light-grey 25 mm 180 m14 80 010 anthracite 25 mm 180 m

14 80 100 light-grey 50 mm 104 m14 80 110 anthracite1) 50 mm 104 m

Rhenofol paving tileRhenofol paving tiles are used for protecting the waterproofing and for marking the maintenance

walkways on roofs covered with Rhenofol.

The tiles provides safe grip and good load distribution.

Simple fixing with Rhenofol paste (consumption about 120 g per tile) or hot-air welding.

Thickness 9 mm with structured surface 4 mm.

14 50 060 grey2) 600 x 800 mm 4 kg/pc 100 pc

Rhenofol laminated metal sheetWith Rhenofol C laminated, hot-galvanised metal sheet with lower protective lacquer coating.

For forming profiles for flashings and cappings and for fixation.

May be cut and bent like galvanised sheets.

12 61 500 light-grey 30 units per stack 2 x 1 m x 1.4mm sheet12 61 900 light-grey 30 units per stack 3 x 1 m x 1.4mm sheet12 82 560 light-grey 30 x 1 m x 1.4 mm coil

12 61 600 anthracite1) 30 units per stack 2 x 1 m x 1.4mm sheet

Product code Colour Delivery form Weight Box

1) Other FDT standard colours on request.2) Colour may differ.

Rhenofol®

20


Rhenfol solvent welding agent (THF)Solvent Tetrahydrofuran (THF). For connecting Rhenofol roofing membrane and seams and as thinner for Rhenofol paste.

Consumption: about 15 g/m. Can be stored for at least 4 years.

12 62 900 4.5 kg container

Rhenofol thinner DColourless solvent for Rhenofol contact adhesive 20, Rhepanol primer 1 and 2 and for use as cleaning agent.



Rhenofol pasteStabilised non-rigid PVC solution.

For securing seam edges at Rhenofol roofing membranes (consumption about 10 g/m) and for fixation of Rhenfol paving tiles.

(Consumption: 120 g per tile). Can be stored for at least 1 year.

12 81 060 light-grey 2 kg container

FDT sealant ASolvent-free one-component sealant on acrylic base. For expansion and connection joints and for Rhenofol flashings on roof lights.

Consumption: about 50 ml/m. Can be stored for at least 1 year.


FDT sealant SOne component sealant on synthetic rubber base. For expansion and connection joints.

Consumption: about 50 ml/m. Can be stored for at least 1 year.


Rhenofol contact adhesive 20Transparent synthetic rubber-based contact adhesive. For bonding Rhenofol roofing membranes to concrete, timber, polyester, steel,

etc. (but not polystyrole). Consumption about 600 g/m². Can be stored for at least 2 years.



21

Rhenofol®

Protection and separation layer, vapour control layer Rhenofol


Length x width (m)

FDT protection layerHighly perforation-resistant PIB membrane with polyester fleece backing but fleece-free welding edge.

17 09 000 black 1.81) 20 x 2.05 1.0 41 9

Rhenofol CSSynthetic membrane with top non-slip embossing. As a protection layer for maintenance and walkways on Rhenofol roofs.

12 86 970 anthracite 1.5 15 x 1.03 1.88 30 15

FDT synthetic fleece 300 g/m²Highly tear-resistant and thermally bound, drill-resistant and alkali-resistant.2)

As a protection layer on rough substrates. To be used for gravel build-ups with Rhenofol and in combination with PE foil for

non-standard gravel. As separation layer to prevent interaction between incompatible materials such as roofing membrane Rhenofol

and old bitumen covering

12 60 000 white 50 x 2.25 0.30 36 9

FDT synthetic fleece 180 g/m²Highly tear-resistant and thermally bound, drill-resistant.

As separation layer to prevent interaction between incompatible materials such as roofing membrane Rhenofol and polystyrene rigid

foam boards. As protection layer for reverse roofs.

12 60 200 white 100 x 2.25 0.18 42 9

Rhenofol glass fleece 120 g/m²Chemically bonded glass fibre fleece. As separation layer to prevent interaction between incompatible materials such as roofing

membrane Rhenofol and polystyrene rigid foam boards and as a fire retarding layer in mechanically fixed layer build-ups with roofing

membrane Rhenofol.

12 60 400 white 100 x 2.00 0.12 26 10

1) Incl. fleece backing2) Other qualities on request.

Rhenofol®

22

Protection and separation layer, vapour control layer Rhenofol


Length x width (m)

FDT vapour control layer PEPolyethylene foil with sd >_100 m. In loosely laid or mechanically fixed layer build-ups with roofing membrane Rhenofol,

for non-air-conditioned rooms according to DIN 4108, part 3. As a separation layer for Rhenofol CG under gravel and in case of

extensive vegetation.

12 60 700 0.25 25 x 4.00 0.25 27 46

FDT vapour control layer alu-gv-skAluminium foil with polyester fabric reinforcement and adhesive coat according to DIN 18234, sd > 1,500 m (practically vapour-proof)

12 90 130 0.5 100 x 1.20 0.28 34 7

FDT connection tapeSeam connection between FDT vapour control layer PE as well as for flashings and trims for FDT

vapour control layer PE on different substrates.

12 60 800 black 12 x 0.08 30

FDT seam tapeButyl adhesive agent fibre-reinforced.

Seam connection between FDT vapour control layers PE in the overlap.

According to regulation DIN 18234-1.

12 87 900 grey 25 x 0.015 18


FDT seam tape

FDT connection tape


23

Rhenofol®

Application tools Rhenofol

Rhenofol membrane cutterWith 4 spare blades.

For easy and safe cutting of Rhenofol.

12 65 500

Rhenofol silicone hand roller4 cm wide. For pressing on the Rhenofol roofing membranes while hot-air welding.

12 66 000

FDT Teflon hand roller3 cm wide. For rolling on Rhenofol prefabricated details and membrane seams while hot-air welding.

17 50 000

FDT metal hand roller small1 cm wide. For rolling on Rhenofol prefabricated details while hot-air welding, also for areas which are difficult to access.

15 01 100

Rhenofol hand roller for standing seam profiles, height 25 mmWith guide for Leister Triac/PID.

12 88 980

FDT PE bottle 0.5 lFor Rhenofol paste.

12 62 600

FDT scissors 250 mmHigh-quality reinforced metal scissors. For easy cutting of Rhenofol.

12 66 100

FDT brush 50 mmFor solvent welding, priming and to apply adhesive.

12 63 000

Product code

membrane cutter


24

FDT VarioGully

ø 184

DN 125 ø 125 mm

73

Roof penetration ø 190 mm

8

3

2

1

4

ø 273

259

DN 100ø 110 mm

9

10

146

3

166

10

8

9

12

76

54

11

DN

100

ø 11

0 m

m

DN

70

ø 75

mm

110

8

4

Roof penetration 190 x 350 mm

Adjustableto anythermalinsulationthicknessfrom 35 mmto 240 mm,withoutadditionalparts

185

DN 125ø 125 mm

6

5 7

189

260

DN

125

ø 12

5 m

m

12

34

8


a Rainwater outlet DN 125

s Insulation sleeve

d Sealing ring

f Screw ring

g Roll ring

h Warm roof upstand

j Vapour control layer collar

k Leaf guard

l Roll ring DN 125

; Reducer DN 125/100

A Transition piece DN 70/100

a Existing old roof

rainwater outlet

s Existing layer build-up

d FDT VarioGully

refurbishment

f FDT synthetic fleece

300 g/m2

g Roofing membrane

Rhenofol CV

h Rhepanol solvent welding

agent (THF)

j Rhepanol collar

k FDT leaf guard

l Mechanical fastening

(4 fast./rainwater outlet)

; Sealing cord

FDT VarioGully, vertical, DN 125,

without reducer

Roof penetration Ø 190 mm

FDT VarioGully, angled, DN 100,

extremely flat, overall height 110 mm,

with transition piece DN 70/100



with warm roof upstand,

without reducer

FDT VarioGully, angled, DN 125,

overall height 189 mm



with reducer DN 125/100

FDT VarioGully, refurbishment

FDT VarioGully is a proven flat roof rainwater outlet according to

EN 1253 and DIN 19599, which is regularly tested by the external

testing institute LGA Bavaria. It is made of rigid PVC, with increased

impact strength, including gravel and leaf guard. In case of

heatable FDT VarioGully options, the heater unit is doubly

protected by the two integrated safety systems (heat monitoring

relay and fuse). Connection via safety transformer 230/24 V

(10 W per outlet).

Range of application:

In warm and cold roof structures in vertical and angled version.

Corresponding warm roof upstands are available for insulation

material thicknesses from 35 to 160 mm and 150 to 240 mm

and 230 to 320 mm. Direct connection to all vapour control

membranes or roofing membranes, or with separately preformed

collar.

ø 273

DN 150ø 160 mm

259

FDT VarioGully, vertical, DN 150

DN 150 (160)

Can also be used in combination with FDT warm roof upstand if

additional thermal insulation is installed.

25


FDT VarioGully roof outlet (flashing collar see page 6, 9 and 18)

Product code Application Dimension

Note:Please observe current manufacturer application instructions and national standards and regulations.

FDT VarioGully, verticalReducer DN 125/100 included. To be used for gravel build-ups with Rhenofol and in combination with PE foil for non-standard gravel.

14 30 000 vertical DN 125 and DN 100

FDT VarioGully, vertical DN 150 (OD 160)14 30 050 vertical DN 150 (OD 160)

FDT VarioGully, vertical, heatableReducer DN 125/100 included. The discharge rate is equivalent to DN 125 or DN 100 with the included reducer (DN125/100) installed.

14 30 100 vertical, heatable DN 125 and DN 100

FDT VarioGully, vertical, heatable DN 150 (OD 160)14 30 150 vertical, heatable DN 150 (OD 160)

FDT VarioGully, angled, extremely flatHeight 110 mm. The discharge rate is equivalent to DN 70 with the included reducer (DN70/100) installed to DN 100.

14 30 250 angled, extremely flat DN 70 and DN 100

FDT VarioGully, angled, extremely flat, heatableHeight 110 mm. The discharge rate is equivalent to DN 70 with the included reducer (DN70/100) installed to DN 100.

14 30 350 angled, extremely flat, heatable DN 70 and DN 100

FDT VarioGully, angledHeight 189 mm.

14 30 200 angled DN 125

FDT VarioGully, angled, heatableHeight 189 mm.

14 30 300 angled, heatable DN 125

FDT VarioGully refurbishmentFor refurbishment outlets up to DN 150. Fasteners and sealing cord are included.

14 30 500 refurbishment

FDT VarioGully warm roof upstandCompatible to all VarioGully outlets. For upstands on non-ventilated roofs (warm roof).

14 30 400 for insulation material thicknesses from 35 mm to 160 mm14 30 410 for insulation material thicknesses from 150 mm to 240 mm14 30 420 for insulation material thicknesses from 230 mm to 320 mm14 30 430 for insulation material thicknesses > 310 mm tailor-made production1)

1) Indication of thickness of thermal insulation necessary when ordering.


26

Accessories FDT VarioGully

FDT emergency overflow socketSimple conversion of FDT VarioGully into an emergency overflow outlet.

Height 40 mm.

Special heights on request.

14 30 800

FDT collars for FDT VarioGullyFor safe flashing of roofing membranes to FDT VarioGully.

For Rhepanol fk collars including self-sealing edge and Gripfix ring. For bitumen membranes collars

are made of polymer bitumen.

14 18 580 Rhepanol fk grey Ø 340 1014 18 550 Rhepanol fk black Ø 340 10

14 18 700 Rhepanol hg grey /black Ø 273 10

14 18 800 Rhenofol light-grey Ø 273 1014 18 940 Rhenofol anthracite 1) Ø 273 10

14 18 500 bitumen membrane2) black Ø 500 5

FDT fire protection collarFor fire stop in buildings according to DIN 18234.

Fire rating F 90 resp. R90.

In case of wall ducts, FDT fire protection collars must be installed on both sides.

14 40 290 for flashing to tubes DN 100 114 40 360 pipe coupling DN 100 114 40 300 tubes DN 125 114 40 350 pipe coupling DN 125 114 40 310 FDT VarioGully, vertical 114 40 320 FDT vent pipe and tube DN 150 1

FDT reducer DN 125/70 eccentric14 17 100 black DN 125/70 eccentric 12

FDT terrace gratingMade of aluminium with lift ring.

For application on flat roofs with paving slabs or in inverted roofs, the installation height of 67 to

90 mm can be adapted to the terrace structure in steps of 3 mm. With a slab height of 90 mm or

more, additional lift rings will be necessary.

Dimension 195 x 195 for grid size 200 x 200 mm.

14 17 300 1

Product code Application Colour Dimension Piece per box

1) Other FDT standard colours on request.2) Not suitable for roof vegetation.

27


Accessories FDT VarioGully

Product code

FDT lift ringEvery additional FDT lift ring gives 36 mm more height.

14 17 200

FDT leaf guardMade of polypropylene (PP) leaf guard/gravel stop, for FDT VarioGully.

14 18 000

FDT lift ringFor all types of FDT VarioGully.

14 30 600

FDT sealing ring ovalFor backflow-proof flashing of the collar below the screw ring.

14 02 200

FDT roll ringFor all types of FDT VarioGully.

14 30 700

FDT VarioGully toolTool for simple and reliable installation of the lift ring for the FDT VarioGully.

14 18 010

FDT protective coverInstallation aid to connect bitumen membranes to FDT VarioGully.

(FDT protective cover is included with FDT bitumen collars.)

14 12 630


28

The application of rainwater and emergency outlets is particularly recommended on small areas, for refurbishment and in special

cases. They can be directly flashed against Rhepanol fk with Rhepanol cover tape, against Rhepanol hg by hot-air welding or against

Rhenofol by hot-air or solvent welding. Attention: Prior to connecting the seams, the flange surfaces must be cleaned using

Rhepanol h seam cleaner or, in the case of Rhenofol, using Rhenofol thinner D.

Product code Description Outer Inner Socket Flange Applicationdiameter diameter length diameterd (mm) d (mm) (mm) (mm)

FDT RWE rainwater outlet, through wall outlet,emergency overflow

FDT RWE rainwater outlet

14 20 000 Rhepanol-RWE 50 50 315 300 for bushing DN 5014 20 010 Rhepanol-RWE 56 56 315 300 for down pipe diameter 6014 20 020 Rhepanol-RWE 63 63 70 315 300 for down pipe diameter 8014 20 030 Rhepanol-RWE 75 75 315 300 for bushing DN 7014 20 040 Rhepanol-RWE 95 95 100 315 380 lip seal (see below)14 20 050 Rhepanol-RWE 110 110 125 315 380 for bushing DN 10014 20 060 Rhepanol-RWE 125 125 315 380 for bushing DN 12514 20 070 Rhepanol-RWE 140 140 315 38014 20 080 Rhepanol-RWE 160 160 315 380 for bushing DN 150

14 21 000 Rhenofol-RWE 50 50 315 300 for bushing DN 5014 21 010 Rhenofol-RWE 56 56 315 300 for down pipe diameter 6014 21 020 Rhenofol-RWE 63 63 70 315 300 for down pipe diameter 8014 21 030 Rhenofol-RWE 75 75 315 300 for bushing DN 7014 21 040 Rhenofol-RWE 95 95 100 315 380 lip seal (see below)14 21 050 Rhenofol-RWE 110 110 125 315 380 for bushing DN 10014 21 060 Rhenofol-RWE 125 125 315 380 for bushing DN 12514 21 070 Rhenofol-RWE 140 140 315 38014 21 080 Rhenofol-RWE 160 160 315 380 for bushing DN 150

FDT leaf guardThe leaf guard is suitable for all RWE rainwater outlets and can be cut to size to fit

the corresponding diameter.

It is also suitable for all through wall outlets.

14 22 000 universal

FDT lip sealThe FDT lip seals are suitable for installation without backflow with all rainwater outlets as well as

for installation directly into the downpipe and old rainwater outlets.

14 22 010 for RWE 95 10014 22 020 for RWE 95 12514 22 030 for RWE 125 15014 22 040 for RWE 160 200

29


Product code Description Outer Slope Socket Flangediameter d length diameter(mm) (mm) (mm)

FDT RWE rainwater outlet, through wall outlet,emergency overflow

FDT through wall outlets

14 20 500 Rhepanol outlet 50 50 5° 480 115/185 x 28014 20 510 Rhepanol outlet 75 75 5° 480 115/185 x 28014 20 520 Rhepanol outlet 110 110 5° 480 115/185 x 280

14 21 500 Rhenofol outlet 50 50 5° 480 115/185 x 28014 21 510 Rhenofol outlet 75 75 5° 480 115/185 x 28014 21 520 Rhenofol outlet 110 110 5° 480 115/185 x 280

FDT weir overflow

14 20 840 Rhepanol weir overflow 75 75 5° 500 300 x 30014 20 810 Rhepanol weir overflow 110 110 5° 500 300 x 30014 20 820 Rhepanol weir overflow 600 x 100 610 x 110 2° 400 760 x 23014 20 830 Rhepanol weir overflow “tailor made”1) as per demand2) 2° as per demand as per demand

14 21 840 Rhenofol weir overflow 75 75 5° 500 300 x 30014 21 810 Rhenofol weir overflow 110 110 5° 500 300 x 30014 21 820 Rhenofol weir overflow 600 x 100 610 x 110 2° 400 760 x 23014 21 830 Rhenofol weir overflow “tailor made”1) as per demand2) 2° as per demand as per demand

FDT weir overflow plusWith extreme high drainage capacity and small socket.

14 20 850 Rhepanol weir overflow plus as per demand2) 2° as per demand as per demand

14 21 850 Rhenofol weir overflow plus as per demand2) 2° as per demand as per demand

1) Also available as through wall outlet.2) Please ask for order form.


30

FDT flat roof accessories

FDT flat roof vent pipe DN 100Made of rigid PVC with increased impact strength. With removable cap and bearing ring.

Ready for installation with integrated collar with self-sealing edge system incl. Gripfix ring. For

bitumen membranes with collar 500 x 500 mm made of bitumen-compatible roofing membrane.

Corpus: grey.

Required opening Ø 190 mm.

14 03 520 Rhepanol fk grey 16014 03 500 Rhepanol fk black 160

14 03 810 Rhepanol hg grey 160

14 03 300 Rhenofol light-grey 1) 16014 03 700 bitumen membrane4) black 160

14 03 570 Rhepanol fk grey 2402)

14 03 550 Rhepanol fk black 2402)

14 03 800 Rhepanol hg grey 2402)

14 03 350 Rhenofol light-grey 1) 2402)

14 03 750 bitumen membrane4) black 2402)

14 03 850 one of the above mentioned3) >240

FDT refurbishment vent pipe DN 100Made of rigid PVC with increased impact strength. With removable cap and ready-to-use integrated

collar with self-sealing edge system. For flashing against vents (diameter DN 100) in the case of

refurbishment with Rhepanol fk, Rhepanol hg and Rhenofol.

Corpus: grey.

14 03 590 Rhepanol fk grey14 03 600 Rhepanol fk black

14 03 630 Rhepanol hg grey

14 03 580 Rhenofol light-grey1)

FDT hose connectionMade of polypropylene. Nominal width DN 100. Flexible flashing against the vent pipe.

Bellows lengths from 200 to 500 mm.

14 13 300 Vent pipe

1) Other FDT standard colours on request.2) Larger insulation material thicknesses (e.g. tapered insulation) on request.3) Required information when ordering: material and colour.4) Not suitable for green roofs.

Product code Application Colour of Thermal insulationcollar thickness (mm)

31


FDT flat roof accessories

Product code For flashing Colour of collar Piece per boxagainst

FDT weather capMade of rigid PVC with increased impact strength. For room ventilation, in combination with the vent pipe/refurbishment vent pipe

for rainproof flashing.

14 12 629 vent pipe/refurbishment vent pipe

FDT cold roof vent DN 100Made of rigid PVC with increased impact strength. Vent cross-section of 880 mm². FDT weather

cap can be removed for maintenance. Ready for installation with integrated collar with self-sealing

edge system and Gripfix ring. For bitumen membranes with collar 500 x 500 mm made of bitumen-

compatible roofing membrane.

Corpus: grey.


14 10 800 Rhepanol hg grey 2

14 10 500 Rhenofol light-grey1) 214 10 700 bitumen membrane2) black 2

FDT lightning conductor sleeveFor flashing against Rhepanol and up to 53 mm for Rhenofol and bitumen. Total height 250 mm.

For Rhepanol fk with self-sealing edge system collar, diameter 340 mm.

For bitumen with collar 500 x 500 made of bitumen compatible roofing membrane.

Corpus for Rhepanol fk is black, for bitumen light-grey.


14 40 000 Rhenofol light-grey 114 40 040 bitumen membrane2) black 1

FDT support coveringFor flashing the roofing membrane against penetrations from 14 mm to 50 mm.

With stainless steel clamp for safety holder with diameter 14 mm to 16 mm.

Flange diameter 160 mm.

For Rhepanol fk with self-sealing edge system collar, diameter 340 mm. Height 150 mm.

For bitumen with collar 500 x 500 made of bitumen-compatible roofing membrane.

Corpus for Rhepanol fk is black, for bitumen light-grey.


14 60 030 Rhenofol light-grey 114 60 060 bitumen membrane2) black 1

1) Other FDT standard colours on request.2) Not suitable for green roofs.


32

FDT wall connection profiles

FDT aluminium wall connection profile EconomyRigid aluminium profile in punched 3 m sections.

For fixing Rhepanol and Rhenofol roofing membranes at vertical surfaces.

Fastening with 5 fasteners per metre, hole diameter 8 mm.

14 09 930 3 m (Bundle à 198 m/pallet with 4.156 m) 60

FDT aluminium wall connection profile ClassicHighly rigid aluminium profile in punched 4 m sections with slot for hooking up metal sheets.

For fixing Rhepanol and Rhenofol roofing membranes at vertical surfaces.

Fastening with 5 fasteners per metre, slotted holes 6.2 x 8 mm.

14 09 900 4 m 60

Rhepanol aluminium wall connection profile GripfixRigid aluminium profile in punched 4 m sections.

For fixing Rhepanol fk roofing membranes at vertical surfaces.

Flashing of Rhepanol fk in the profile.

Fastening with 5 fasteners per metre, hole diameter 6.5 mm.

14 09 920 4 m 60

Product code Length Profile height(mm)

33


FDT roof edge trim

FDT roof edge trim 110Consisting of an extruded aluminium mounting rail and roll-formed stove enamel cover (colour:

silver metallic grey), as well as plastic clamps for fixing roofing membranes up to 5 mm thickness.

Roofing membranes < 1.5 mm must be folded back once in the clamping area.

Special colours for covers, joint connections and corners can be supplied, matching any RAL colour.1)

14 11 500 silver metallic grey 4 m/110 mm 8, 12, 40 m

FDT corner 110Cover roll-formed, silver metallic grey2), stove enamel.

Side length 200 x 200 mm, for easy making of internal and external corners.

14 12 200 silver metallic grey

FDT joint connection 110Silver metallic grey2), stove enamel.

14 12 100

FDT aluminium roof edge trim 175 (see FDT roof edge trim 110)Consisting of an extruded aluminium mounting rail and roll-formed stove enamel cover (colour: silver metallic grey), as well as plastic

clamps for fixing roofing membranes up to 5 mm thickness. Roofing membranes < 1.5 mm must be folded back once in the clamping

area. Special colours for covers, joint connections and corners can be supplied, matching any RAL colour.1)

14 11 501 silver metallic grey 4 m/175 mm 8, 12, 20 m

FDT corner 175Cover roll-formed, silver metallic grey2), stove enamel.

Side length 200 x 200 mm, for easy making of internal and external corners.

14 12 201 silver metallic grey

FDT joint connectionSilver metallic grey2), stove enamel.

14 12 101

FDT plastic clamps (additional/replacement)For fixing the roofing membrane to the profile.

14 12 000 black 30 pc per bag

Product code Colour of cover Length/height Packing unit

1) Additional charge for special colours for covers or corners is 7.50 euros per metre. Delivery time on request.2) Similar to RAL 9006/9007.


34

FDT gravel stop profiles

FDT gravel stop profile packageStainless steel gravel stop profile. The FDT holders are fixed to the waterproofing with a piece of

Rhepanol hg or Rhenofol roofing membrane. The Rhepanol holders with sealing edge system and

collar are placed directly on the Rhepanol fk and screwed to the supporting construction.

The stainless steel clamp serves as a joint connection and for stiffening the gravel stop profile above

the holder. At slopes exceeding 5°, application should be agreed with our Technical Department.

14 40 100 Rhepanol fk grey/black1) 60 10 pc à 2 m incl. holders and clamps14 40 200 Rhepanol fk grey/black1) 100 2) 10 pc à 2 m incl. holders and clamps

14 40 150 Rhepanol hg/Rhenofol CG 60 10 pc à 2 m incl. holders and clamps14 40 250 Rhepanol hg/Rhenofol CG 100 2) 10 pc à 2 m incl. holders and clamps

Additional items for the package as required:

Rhepanol holder and clamps14 40 160 grey/black1) 6014 40 260 grey/black1) 100 2)

FDT holder and clamps for Rhepanol hg and Rhenofol CG14 40 170 silver 6014 40 270 silver 100 2)

FDT gravel stop profile 2 m14 40 140 silver 6014 40 240 silver 100 2)

FDT internal corner for gravel stop profileInternal corner made of stainless steel to insert the gravel stop profile.

14 40 120 silver 6014 40 220 silver 100 2)

FDT external corner for gravel stop profileExternal corner made of stainless steel to insert the gravel stop profile.

14 40 130 silver 6014 40 230 silver 100 2)

Product code For roofing Colour Height Form of supplymembrane in mm

1) Please indicate colour of Rhepanol fk roofing membrane when ordering the holders.2) For 100 mm application should be agreed with our Technical Department.

Note:If incomplete packages are ordered, we ask a surcharge of 40.00 euros. Delivery time about 1 week.

35

Service

Request for wind uplift calculation

Please copy and fax to: + 49 6 21- 85 04 - 4 45

Please send the results to:

First name/Last name: ...................................................................... Company: ............................................................................

Street, No./P.O. Box: ......................................................................... Postcode/City: ......................................................................

Telephone/fax: .................................................................................. E-mail: .................................................................................

Location/date ✗ Signature

Please make a wind uplift calculation for mechanical fastening for the following building project according to:

DIN 1055-4 (2005-03) EUROCODE .........................................................................................

Project: Project name: ............................................ Street, No.: ............................................................................

Postcode/city: ............................................. District/country: ....................................................................

Geometry: Separate sketch (will be sent) Yes No Drainage

Length: .................................................. m Height: .................................... m Internal drainage

Width: .................................................. m Roof pitch: ............................. ° External drainage

Project location: Wind zone1) : ......................................... Terrain category1) : ...................

Height above sea level: ......................... m Parapet height1) : ..................... m

Structure1): Opening percentage of exterior walls < 1% and approximately evenly distributed; closed building

Opening of at least at one external wall > 30% (please enclose sketch illustrating the position of the openings)

Opening of at least at one external wall > 1% and < 30%; please add the following information:

Opening on windward side: .......................... m2 Opening in total: ....................................... m2

Fastener: Manufacturer: ............................................ Type: .....................................................................................

Roof membranes: Rhepanol fk (Gripfix system) Rhepanol hg (green roof)

Rhenofol CV (seam fastening) Rhenofol CG (green roof)

Rhenofol CV (solvent welding system)

Preferred membrane width: .................... m Preferred membrane thickness: ..................... mm

Substrate/supporting construction:

Concrete: ....................................... mm Lightweight concrete: .................................................. mm

Timber: .......................................... mm Other material: .......................................... ............. mm

Profiled steel deck

Manufacturer: ......................................................................................................

Corrugation spacing (rib width): ........................ mm Overall thickness: .................................... mm

Overall thickness of the layer build-up: ...................................... mm

Additional information:

..............................................................................................................................................................................................................

1) For further information please see the explanations on the data survey form.

Service

36

Request for drainage equipment calculation for VarioGully

Please copy and fax to: + 49 6 21- 85 04 - 4 45

Drainage equipment calculation for buildings with internal drainage according to DIN 1986-100:

Building project:

Object name: .............................................. Address: ................................................. City: ........................................................

Downpipes:

Are not yet designed Are already designed

Project data:

Building width: ........................... m

Building length: ........................... m

Number of valleys: ........................... units

Roof slope: ........................... ° or .......................... %

Roof type: Without ballast

With ballast/extensive green roof < 10 cm

Extensive/intensive green roof > 10 cm

Valleys/gutters:

Valleys/gutters are irregularly distributed.

Roof area

Length [m]

Width [m]

Emergency drainage:

The emergency drainage system for centennial rain is to be designed with: Emergency outlets

Parapet slots

The available load reserve for the water pressure ......................... kN/m²

resp. maximum overflow height ......................... mm

Valley 1

.........................

.........................

Valley 2

.........................

.........................

Valley 3

.........................

.........................

Valley 4

.........................

.........................

Valley 5

.........................

.........................

Valley 6

.........................

.........................

Please send the results to:

First name/Last name: ...................................................................... Company: ............................................................................

Street, No./P.O. Box: ......................................................................... Postcode/City: ......................................................................

Telephone/fax: .................................................................................. E-mail: .................................................................................

Location/date ✗ Signature

37

Service

Order example for Rhepanol® fk

Sketch of roof: Data:

Area: 500 m2 bonded

Roof parapet: 65 m

Height of parapet: 60 cm � connecting membrane 1.05 m

Wall: 25 m � connecting membrane 0.35 m

Roof light: Size: 100/150 height: 30 cm

� Connecting membrane 0.52 m

Drainage: 4 outlets

2 emergency overflows

Breakthrough: 2 vent pipes

2 lightning conductors

Material requirements: Order quantity:

Area: Membrane: 500 m² / 15 m (1.05 roll) = 34 rolls Rhepanol fk 1.05 m

Rhepanol adhesive 90: 500 m² x about 260 g/m² = 150 kg Rhepanol adhesive 90

Parapet: Membrane: 65 m / 15 m (1.05 m roll) = 5 rolls Rhepanol fk 1.05 m

Rhepanol contact adhesive 50: 65 m x 0.45 m x 500 g/m2 = 15 kg Rhepanol contact adhesive 50

FDT roof edge trim 110 = 68 m

Wall: Membrane: 25 m / 15 m (0.35 m roll) = 2 rolls Rhepanol fk 0.35 m

Rhepanol aluminium wall connection profile Gripfix = 28 m

FDT sealant A: 25 m x 50 ml / 300 ml = 5 cartridges

Drainage: FDT VarioGully, vertical = 4 pieces

FDT VarioGully, warm roof upstand = 4 pieces

FDT collar for FDT VarioGully, Rhepanol fk = 4 pieces

FDT weir overflow 600 mm x 100 mm = 2 pieces

Roof light: Membrane: 100/150 cm � 6 m (0.52 m roll) = 1 roll Rhepanol fk 0.52 m

with double-sided self-sealing edge

Rhepanol contact adhesive 50: 0.2 m x 6 m x 500 g/m2 = see above

FDT sealant S: 5 m x 50 ml / 300 ml = 1 cartridge

Rhepanol fk universal roof light corner = 4 pieces

Cover tape: 34 rolls Rhepanol fk 1.05 m � 34 T-joints = 50 m Rhepanol fk cover tape

x 1.10 m � 36.7 m + flashings 100 mm wide

Rhepanol paste: = 2 cartridges

Corners: Rhepanol fk internal corners 90° = 4 pieces

Rhepanol fk external corners 90° = 4 pieces

Breakthrough: FDT vent pipe DN 100 with Rhepanol fk collar = 2 pieces

FDT lightning conductor for Rhepanol fk = 2 pieces

Rhepanol solvent-welding 500 m² area + about 160 m connection = 10 kg

agent: (for cleaning the seams)

Wall

connec

tion

Roof parapet

Roof par

apet

Roof parapet

Outlet Outlet

Outlet Outlet

Vent pipes

Roof light

Emergencyoverflow

Service

38

Order form for Rhepanol® fkPlease copy and send to +49621- 8504 - 378

Date: ........................ 20 ......

Customer address: ...................................................................

...............................................................................

...............................................................................

...............................................................................

...............................................................................

Contact person: .......................................................................

Request date of delivery: ....................... 20 ......

Shipping address: .......................................................................

.......................................................................

.......................................................................

.......................................................................

.......................................................................

Phone no.: .......................................................................

Product code Description Colour Quantity Unit Price in euros

Rhepanol fk 1.05 m

Rhepanol fk 0.65 m

Rhepanol fk 0.52 m

Rhepanol fk 0.35 m

Rhepanol fk 1.05 m double-sided self-sealing edge





Rhepanol f 1.5 mm ........... m

Rhepanol Gripfix strips roll à 60 m

Rhepanol cover tape 100 / 150 / 200 / 350 mm

Rhepanol coated metal sheet ........... x 1 m

Rhepanol h strips / FDT adhesive tape

Rhepanol fk internal corner 90° with self-sealing edge

Rhepanol fk external corner 90° with self-sealing edge

Rhepanol fk universal roof light corner with self-sealing edge

Rhepanol fk roof light corner universal rapid

Rhepanol fk standing seam profile

Rhepanol solvent-welding agent 1 l / 5 kg

Rhepanol contact adhesive 50 4.5 kg / 12 kg

Rhepanol paste 300 ml

Rhepanol contact adhesive 90 9 / 12 / 25 kg

Rhepanol primer Precol 5 kg

FDT VarioGully, refurbishment

FDT VarioGully, vertical heatable

FDT VarioGully, angled heatable

FDT VarioGully, warm roof attachment

FDT collar Rhepanol fk for VarioGully

Rhepanol weir overflow 600 x 100

Vent pipe for Rhepanol fk

FDT adhesive U 6.5 kg

39

Service

FDT – legal notice

We refer emphatically to the fact that all details mentioned,

especially the application and utilisation recommendation for the

roofing membranes and their system accessories, have been

developed under normal conditions and based on our knowledge

and experience. Appropriate storage and usage of the products

are assumed.

A warranty or reliability of a finished project cannot be deduced

because of varying materials, substrates and differing work

conditions, neither by any indications nor from verbal statements,

irrespective of any legal positions.

For the possible accusation that FDT acted intentionally or

grossly negligent, the applicator has to supply evidence that they

provided FDT with all information and details, necessary for an

appropriate and correct evaluation through FDT in written form,

immediately available and complete. The applicator themselves

are responsible for ensuring that the products are suitable for the

given application.

It is FDT’s right to change product specifications without notice.

Property rights of third parties are to be considered.

In addition our particular sales and delivery terms are valid.

Mandatory is the latest version of our product data sheet and our

application manual, which can be requested directly from FDT.

FlachdachTechnologieGmbH & Co. KG

Eisenbahnstrasse 6-868199 MannheimGermany

Tel +49-6 21-85 04-0Fax +49-6 21-85 04-2 05www.fdt.de

Export Department:

Phone +49-6 21-85 04-3 72

Fax +49-6 21-85 04-3 78

E-mail [email protected]

117 | 10 | 04/12 | GB |

FDT120423_Lieferprogramm_2012_ENG

Documents

rhepanol accessories

fdt flat roof accessories

bonding system rhepanol

rhepanol adhesive

fdt roof edge trim

fdt gravel

rhepanol hg roofing

selfsealing edge