Little Buster Sign Stand with (1) Safe Sleeve 350 and (1) Rigid Sign Bracket Safe Sleeve 350 Notes to Little Buster with Safe Sleeve and Rigid Bracket (Model 24018-SSB) 1. Safe Sleeve & Rigid Bracket is approved for use with the following substrates: A. .125, .100 and .080 Aluminum B. 5/8 inch Plywood C. Up to 3mm aluminum laminate (also known as “ACS” or aluminum composite) D. Up to 16mm corrugated plastic sign E. Roll up sign with fiberglass braces 2. Mounting Heights for all shapes and substrates is a 15” bottom height 3. Approved for the following sizes (width stated first): 48” x 48” Diamond or Square, 48” x 24”, 60” x 30”, 48” x 72”, 60” x 24” 48” x 60” 4. Little Buster is approved for use with Flags and/or Light attached along with signs Rigid Bracket FDOT APL# 102-014-005 Little Buster Sign Stand (Series 24000)
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Little Buster Sign Stand with (1) Safe Sleeve 350 and (1) Rigid Sign Bracket
Safe Sleeve 350
Notes to Little Buster with Safe Sleeve and Rigid Bracket (Model 24018-SSB) 1. Safe Sleeve & Rigid Bracket is approved for use with the following substrates: A. .125, .100 and .080 Aluminum B. 5/8 inch Plywood C. Up to 3mm aluminum laminate (also known as “ACS” or aluminum composite) D. Up to 16mm corrugated plastic sign E. Roll up sign with fiberglass braces 2. Mounting Heights for all shapes and substrates is a 15” bottom height 3. Approved for the following sizes (width stated first): 48” x 48” Diamond or Square, 48” x
24”, 60” x 30”, 48” x 72”, 60” x 24” 48” x 60” 4. Little Buster is approved for use with Flags and/or Light attached along with signs
Rigid Bracket
FDOT APL# 102-014-005 Little Buster Sign Stand (Series 24000)
Little Buster shown with (2) Rigid Sign Brackets and Optional Roll Up Bracket
Notes to Drawing of Little Buster with (1) Roll Up Bracket (Model #24018-BRU) 1. Will hold Roll-Up Signs Only 2. Mounting Heights can be 1’ to 5’ to the bottom of the sign 3. Little Buster is approved for use with Flags and/or Light attached along with signs 4. Approved for the following sizes (width stated first): 48” x 48” Diamond or Square, 48” x 24”,
60” x 30”, 48” x 72”, 60” x 24” 48” x 60”
1 to 5 Feet
FDOT APL# 102-014-005 Little Buster Sign Stand (Series 24000)
Exte
nd
ed H
t.
8
9 i
nch
es
Optional Roll-up Bracket
Little Buster shown with (2) Rigid Sign Brackets and Optional Roll Up Bracket
Notes to Drawing of Little Buster with (2) Rigid Brackets (Model #24018-RSB) 1. Two Rigid Brackets can be used with the following substrates: A. Up to 3mm aluminum laminate (“ACS” or “aluminum composite”) B. Up to 16mm corrugated plastic 2. Mounting Heights for all the above substrates with (2) Rigid Brackets is 12” 3. Little Buster is approved for use with Flags and/or Light attached along with signs 4. Approved for the following sizes (width stated first): 48” x 48” Diamond or Square, 48” x 24”,
60” x 30”, 48” x 72”, 60” x 24” 48” x 60”
Rigid Sign Bracket
FDOT APL# 102-014-005 Little Buster Sign Stand (Series 24000)
Related Documents
