FD - RW/AR Diesel Engine Series Fire Driver is a registered trade mark of National Fire Fighting Manufacturing FZCO. For further information please contact: P.O.Box 17014, Dubai, United Arab Emirates T: +971 4 806 6666 F: +971 4 881 6229 E: [email protected]www.fire-driver.com We reserve the right to modify specifications without prior notice Fire Pump Application CAT. NO. NF/FD/11/10
4
Embed
FD - RW/AR Diesel Engine Series · 2020. 1. 13. · Fire Driver is a registered trade mark of FD - RW/AR Diesel Engine Series National Fire Fighting Manufacturing FZCO. For further
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
FD - RW/AR Diesel Engine SeriesFire Driver is a registered trade mark of National Fire Fighting Manufacturing FZCO.
For further information please contact:
P.O.Box 17014, Dubai, United Arab EmiratesT: +971 4 806 6666 F: +971 4 881 6229E: [email protected]
We reserve the right to modify specifications without prior notice
Introduction
Fire Driver® diesel engines are specifically designed for fire pump applications.
The state of the art technology used throughout the design and manufacturing ensures
the reliable operation of these engines as demanded by the fire fighting systems.
These engines have improved performance and combustion efficiency.
The characteristics such as high torque and heavy duty construction makes these
engines a right choice for fire fighting applications. FD-RW series comprises of
Fire Driver® diesel engines are specifically designed for
fire pump applications. The proven technologies used
throughout the design and manufacturing ensures the
reliable operation of these engines during fire condition.
These air-cooled direct injection diesel engines are smaller in volume, lighter in weight and lower in fuel consumption. The improved cooling and combustion properties results in the highly efficient performance of this engine. FD-AR series comprises of single cylinder 4 stroke air cooled diesel engines. These engines are subjected to rigorous performance tests prior to the dispatch to ensure that the performance ratings are achieved as required by the design specifications.
Construction Features:
Engine Cylinder Block assembly:
Engine block is an integral casting of crank shaft case and cylinders, in which full-support
main bearings are used, and it is made of alloy Cast Iron. Wall Cylinder liners are made of
boron phosphorous cast iron.
Crank shaft and fly wheel assembly:
Crack shaft is made of high strength nodular cast iron or alloy steel with four balance
weights on web. Fly wheel is fitted on the rear end of the crank shaft with bolts. Crank shaft,
flywheel and damper are balanced for smooth operation.
Piston connecting rod assembly:
The top piston is designed to facilitate thermal flow; its skirt is of variable oval barrel surface
and with slipper ends. Piston is fitted with top and bottom face crome-coated oil ring and
coiled spring expander. Connecting rods are made of forged steel with numbering on its caps
and bodies.
Air filter:
The air cleaner is of cyclone dust collecting paper element type.
Fuel Supply system:
The fuel supply system consists of fuel supply pump, fuel injection pump, speed governor,
fuel injection auto advancer, fuel filter, fuel injector and high & low pressure line. Fuel supply
pump is of piston type and is driven by eccentric cam on the cam shaft. Fuel filter is of
paper element type. The fuel injection pump is Bosch pump type A and is forced lubrication
type. The maximum fuel delivery and maximum speed limiting screw of speed governor are
properly adjusted before delivery.
Lubrication system:
Lubrication system consists of oil pump, oil filter, oil cooler, pressure control valve and pipe
line. Oil pump is gear type and is driven by the gear of the cam shaft. Oil filter is of paper
element type. Oil cooler is composed of fins and pipe.
Cooling system:
The cooling system is close forced circulation water cooling type. Cooling water pump is of
centrifugal type. The thermostat is of wax type. Radiator is of vertical flow type and is fitted
with a blower fan.
Electric System:
Electrical system includes electrical starter motor and starter solenoids. The starter and
generator of these diesel engines are 12V or 24V. There is a vacuum pump mounted behind
the generator and the shaft of vacuum pump is aligned with the shaft of generator.
Exhaust System:
The exhaust system consists of 90° Bend, exhaust silencer and flexible exhaust connector.
Standard Equipment
Dry Type Air Cleaner
Full flow duel Filters
Full flow Lube oil filters
Fuel Lift Pump
Cooling Water Pump
Lubricating Oil Pump
Stop Lever
Alternator
Flywheel Housing
Flywheel
Fire Resistant Fuel Pipes
Fuel Injection System
Thermostat
Exhaust Manifold
CAT.
NO
. NF/
FD/1
1/10
FD - RW/AR Diesel Engine SeriesFire Driver is a registered trade mark of National Fire Fighting Manufacturing FZCO.
For further information please contact:
P.O.Box 17014, Dubai, United Arab EmiratesT: +971 4 806 6666 F: +971 4 881 6229E: [email protected]
We reserve the right to modify specifications without prior notice
Introduction
Fire Driver® diesel engines are specifically designed for fire pump applications.
The state of the art technology used throughout the design and manufacturing ensures
the reliable operation of these engines as demanded by the fire fighting systems.
These engines have improved performance and combustion efficiency.
The characteristics such as high torque and heavy duty construction makes these
engines a right choice for fire fighting applications. FD-RW series comprises of
Fire Driver® diesel engines are specifically designed for
fire pump applications. The proven technologies used
throughout the design and manufacturing ensures the
reliable operation of these engines during fire condition.
These air-cooled direct injection diesel engines are smaller in volume, lighter in weight and lower in fuel consumption. The improved cooling and combustion properties results in the highly efficient performance of this engine. FD-AR series comprises of single cylinder 4 stroke air cooled diesel engines. These engines are subjected to rigorous performance tests prior to the dispatch to ensure that the performance ratings are achieved as required by the design specifications.
Construction Features:
Engine Cylinder Block assembly:
Engine block is an integral casting of crank shaft case and cylinders, in which full-support
main bearings are used, and it is made of alloy Cast Iron. Wall Cylinder liners are made of
boron phosphorous cast iron.
Crank shaft and fly wheel assembly:
Crack shaft is made of high strength nodular cast iron or alloy steel with four balance
weights on web. Fly wheel is fitted on the rear end of the crank shaft with bolts. Crank shaft,
flywheel and damper are balanced for smooth operation.
Piston connecting rod assembly:
The top piston is designed to facilitate thermal flow; its skirt is of variable oval barrel surface
and with slipper ends. Piston is fitted with top and bottom face crome-coated oil ring and
coiled spring expander. Connecting rods are made of forged steel with numbering on its caps
and bodies.
Air filter:
The air cleaner is of cyclone dust collecting paper element type.
Fuel Supply system:
The fuel supply system consists of fuel supply pump, fuel injection pump, speed governor,
fuel injection auto advancer, fuel filter, fuel injector and high & low pressure line. Fuel supply
pump is of piston type and is driven by eccentric cam on the cam shaft. Fuel filter is of
paper element type. The fuel injection pump is Bosch pump type A and is forced lubrication
type. The maximum fuel delivery and maximum speed limiting screw of speed governor are
properly adjusted before delivery.
Lubrication system:
Lubrication system consists of oil pump, oil filter, oil cooler, pressure control valve and pipe
line. Oil pump is gear type and is driven by the gear of the cam shaft. Oil filter is of paper
element type. Oil cooler is composed of fins and pipe.
Cooling system:
The cooling system is close forced circulation water cooling type. Cooling water pump is of
centrifugal type. The thermostat is of wax type. Radiator is of vertical flow type and is fitted
with a blower fan.
Electric System:
Electrical system includes electrical starter motor and starter solenoids. The starter and
generator of these diesel engines are 12V or 24V. There is a vacuum pump mounted behind
the generator and the shaft of vacuum pump is aligned with the shaft of generator.
Exhaust System:
The exhaust system consists of 90° Bend, exhaust silencer and flexible exhaust connector.
Standard Equipment
Dry Type Air Cleaner
Full flow duel Filters
Full flow Lube oil filters
Fuel Lift Pump
Cooling Water Pump
Lubricating Oil Pump
Stop Lever
Alternator
Flywheel Housing
Flywheel
Fire Resistant Fuel Pipes
Fuel Injection System
Thermostat
Exhaust Manifold
CAT.
NO
. NF/
FD/1
1/10
FD - RW/AR Diesel Engine SeriesFire Driver is a registered trade mark of National Fire Fighting Manufacturing FZCO.
For further information please contact:
P.O.Box 17014, Dubai, United Arab EmiratesT: +971 4 806 6666 F: +971 4 881 6229E: [email protected]
We reserve the right to modify specifications without prior notice
Introduction
Fire Driver® diesel engines are specifically designed for fire pump applications.
The state of the art technology used throughout the design and manufacturing ensures
the reliable operation of these engines as demanded by the fire fighting systems.
These engines have improved performance and combustion efficiency.
The characteristics such as high torque and heavy duty construction makes these
engines a right choice for fire fighting applications. FD-RW series comprises of
Fire Driver® diesel engines are specifically designed for
fire pump applications. The proven technologies used
throughout the design and manufacturing ensures the
reliable operation of these engines during fire condition.
These air-cooled direct injection diesel engines are smaller in volume, lighter in weight and lower in fuel consumption. The improved cooling and combustion properties results in the highly efficient performance of this engine. FD-AR series comprises of single cylinder 4 stroke air cooled diesel engines. These engines are subjected to rigorous performance tests prior to the dispatch to ensure that the performance ratings are achieved as required by the design specifications.
Construction Features:
Engine Cylinder Block assembly:
Engine block is an integral casting of crank shaft case and cylinders, in which full-support
main bearings are used, and it is made of alloy Cast Iron. Wall Cylinder liners are made of
boron phosphorous cast iron.
Crank shaft and fly wheel assembly:
Crack shaft is made of high strength nodular cast iron or alloy steel with four balance
weights on web. Fly wheel is fitted on the rear end of the crank shaft with bolts. Crank shaft,
flywheel and damper are balanced for smooth operation.
Piston connecting rod assembly:
The top piston is designed to facilitate thermal flow; its skirt is of variable oval barrel surface
and with slipper ends. Piston is fitted with top and bottom face crome-coated oil ring and
coiled spring expander. Connecting rods are made of forged steel with numbering on its caps
and bodies.
Air filter:
The air cleaner is of cyclone dust collecting paper element type.
Fuel Supply system:
The fuel supply system consists of fuel supply pump, fuel injection pump, speed governor,
fuel injection auto advancer, fuel filter, fuel injector and high & low pressure line. Fuel supply
pump is of piston type and is driven by eccentric cam on the cam shaft. Fuel filter is of
paper element type. The fuel injection pump is Bosch pump type A and is forced lubrication
type. The maximum fuel delivery and maximum speed limiting screw of speed governor are
properly adjusted before delivery.
Lubrication system:
Lubrication system consists of oil pump, oil filter, oil cooler, pressure control valve and pipe
line. Oil pump is gear type and is driven by the gear of the cam shaft. Oil filter is of paper
element type. Oil cooler is composed of fins and pipe.
Cooling system:
The cooling system is close forced circulation water cooling type. Cooling water pump is of
centrifugal type. The thermostat is of wax type. Radiator is of vertical flow type and is fitted
with a blower fan.
Electric System:
Electrical system includes electrical starter motor and starter solenoids. The starter and
generator of these diesel engines are 12V or 24V. There is a vacuum pump mounted behind
the generator and the shaft of vacuum pump is aligned with the shaft of generator.
Exhaust System:
The exhaust system consists of 90° Bend, exhaust silencer and flexible exhaust connector.
Standard Equipment
Dry Type Air Cleaner
Full flow duel Filters
Full flow Lube oil filters
Fuel Lift Pump
Cooling Water Pump
Lubricating Oil Pump
Stop Lever
Alternator
Flywheel Housing
Flywheel
Fire Resistant Fuel Pipes
Fuel Injection System
Thermostat
Exhaust Manifold
CAT.
NO
. NF/
FD/1
1/10
FD - RW/AR Diesel Engine SeriesFire Driver is a registered trade mark of National Fire Fighting Manufacturing FZCO.
For further information please contact:
P.O.Box 17014, Dubai, United Arab EmiratesT: +971 4 806 6666 F: +971 4 881 6229E: [email protected]
We reserve the right to modify specifications without prior notice
Introduction
Fire Driver® diesel engines are specifically designed for fire pump applications.
The state of the art technology used throughout the design and manufacturing ensures
the reliable operation of these engines as demanded by the fire fighting systems.
These engines have improved performance and combustion efficiency.
The characteristics such as high torque and heavy duty construction makes these
engines a right choice for fire fighting applications. FD-RW series comprises of
Fire Driver® diesel engines are specifically designed for
fire pump applications. The proven technologies used
throughout the design and manufacturing ensures the
reliable operation of these engines during fire condition.
These air-cooled direct injection diesel engines are smaller in volume, lighter in weight and lower in fuel consumption. The improved cooling and combustion properties results in the highly efficient performance of this engine. FD-AR series comprises of single cylinder 4 stroke air cooled diesel engines. These engines are subjected to rigorous performance tests prior to the dispatch to ensure that the performance ratings are achieved as required by the design specifications.
Construction Features:
Engine Cylinder Block assembly:
Engine block is an integral casting of crank shaft case and cylinders, in which full-support
main bearings are used, and it is made of alloy Cast Iron. Wall Cylinder liners are made of
boron phosphorous cast iron.
Crank shaft and fly wheel assembly:
Crack shaft is made of high strength nodular cast iron or alloy steel with four balance
weights on web. Fly wheel is fitted on the rear end of the crank shaft with bolts. Crank shaft,
flywheel and damper are balanced for smooth operation.
Piston connecting rod assembly:
The top piston is designed to facilitate thermal flow; its skirt is of variable oval barrel surface
and with slipper ends. Piston is fitted with top and bottom face crome-coated oil ring and
coiled spring expander. Connecting rods are made of forged steel with numbering on its caps
and bodies.
Air filter:
The air cleaner is of cyclone dust collecting paper element type.
Fuel Supply system:
The fuel supply system consists of fuel supply pump, fuel injection pump, speed governor,
fuel injection auto advancer, fuel filter, fuel injector and high & low pressure line. Fuel supply
pump is of piston type and is driven by eccentric cam on the cam shaft. Fuel filter is of
paper element type. The fuel injection pump is Bosch pump type A and is forced lubrication
type. The maximum fuel delivery and maximum speed limiting screw of speed governor are
properly adjusted before delivery.
Lubrication system:
Lubrication system consists of oil pump, oil filter, oil cooler, pressure control valve and pipe
line. Oil pump is gear type and is driven by the gear of the cam shaft. Oil filter is of paper
element type. Oil cooler is composed of fins and pipe.
Cooling system:
The cooling system is close forced circulation water cooling type. Cooling water pump is of
centrifugal type. The thermostat is of wax type. Radiator is of vertical flow type and is fitted
with a blower fan.
Electric System:
Electrical system includes electrical starter motor and starter solenoids. The starter and
generator of these diesel engines are 12V or 24V. There is a vacuum pump mounted behind
the generator and the shaft of vacuum pump is aligned with the shaft of generator.
Exhaust System:
The exhaust system consists of 90° Bend, exhaust silencer and flexible exhaust connector.