FC612 - USB OABR Stick Raw I 100Base-T1 I USB-A connector I Windows and Linux Raw-Ethernet device I NXP TJA1101 access I Powerful Software APIs The USB-Tool-Stick for Automotive Ethernet Compact and flexible USB2.0 adapter The FC612 extends family of USB / Automotive Ethernet (100Base-T1) to full-featured Ethernet Layer2 receiver and sender. In comparison to FC601/FC602, the FC612 is not installed as network device, but comes with new powerful broadway2-API to get full raw Layer2 access in 100Base-T1 networks. FC612 and FC611 are full software compatible and can also be mixed. Major difference is new board design using latest NXP TJA1101 Automotive Ethernet Phy. Features I NXP TJA1101 Automotive Ethernet Phy I Master/Slave switch to start simple I USB Bulk In-Out to Ethernet Layer2 I Common C-API and python wrapper I UTP connector to connect Automotive 100Base-T1 devices I Software API to access all features of TJA1101 I python wrapper on new broadway2-API I Easy firmware update via USB I Windows 10, Windows 7, Raspberry Pi and Ubuntu x64/i.MX8 ARM Applications I Windows/Linux Host as raw protocol analyzer for 100Base-T1 networks I Test/Counterpart to node/switch environments I use powerful python packages like dpkt, pypacker to decode raw frames to ICMP, UDP/TCP-IP, ... I Point-to-Point 100Base-T1 using 2xFC612 I fits perfect to all Automotive Ethernet switches to verify layer2 switching rules and timing I verify and validate all test modes of TJA1101