Fast-Flap Neuro Fixation System Fast-Flap system Fast Flap Plates and Screws – 1.2mm – 1.6mm Low Profile Fast Flap Plates and Screws – 1.6mm Neuropack.

Fast-Flap Neuro Fixation System

• Fast-Flap system• Fast Flap Plates and Screws

– 1.2mm– 1.6mm

• Low Profile Fast Flap Plates and Screws– 1.6mm

• Neuropack• Osteoform Mesh®

– 1.2mm– 1.6mm


• Fast Flap : SCREW

Available in diameters-

1.2mm and 1.6mm

Lengths for 1.2mm screws are 3,4 and 5mm

Lengths for 1.6mm screws are 4,5 and 6mm

Safety Screw1.5mm x 3mm

FeaturesOsteoMed's Auto-Drive® self-drilling screws are the only patented cruciform drive self-drilling screws available. These screws employ a cruciform drive head design, ensuring the applied axial force is distributed evenly throughout the screw head, while minimizing screw head stripping. The TaperLock self-retaining mechanism on the screw head ensures optimal stability during screw placement. The screws also utilize innovative Maximum Thread Area (MTA) technology that maximizes the area of bone-to-screw interface.


•Fast Flap : SCREW

CRUCIFORMCENTER DRIVE

• Fast Flap :1.2MM PLATES

Fast-Flap Neuro Fixation System18 Hole Straight Plate

Bur Hole Plate

X Plate

Y Plate

Curved Plate

Square Plate

Quad Plate

Straight Plate

• Fast Flap : 1.6MM PLATES


Y Plate

Square Plate

Straight Plate

18 Hole Straight Plate

Sub Temporal Plate Bur Hole Plate

Quad Plate Gap Plate

Mesh PlateShunt Plate

• Fast Flap : Low Profile Plates


• Fast Flap : OsteoForm Mesh


•Pre-formed mesh allows for easy adaptation to anatomical curvature of cranium •Applicable to varying anatomical curves with minor contouring of appliance •Rapid mesh application when used with OsteoMed’s patented Auto-Drive self-drilling screws •Rigidity and strength provide for better protection of underlying structures •Use as a stand alone titanium appliance or as scaffolding for cranioplasty

ALSO AVAILABLE IN STERILE PACK

Malleable: 0.3mm profile CP G3Rigid: 0.6mm profile CP G3Extra-rigid: 1.0mm profile CP G3

• Fast Flap : DRILLS

1.2mm System (Yellow Band) 1.6mmSystem (White Band)


0.9mm Drill

1.2mm Driver Stem 1.6mm Auto Tap

0.9mmExtended Drill


Plate Bending Forceps

Plate Bending ForcepsSmall Grasping

Forceps

Small Grasping Forceps

•Fast Flap : INSTRUMENTS


Taperlock Screwdriver Body

Taperlock Screwdriver Body

Rigid Mini Plate Cutter

Rigid Mini Plate Cutter

Plate CutterPlate Cutter

•Fast Flap : INSTRUMENTS

Fast Flap: Features & Benefits• Patented Auto-Drive self-drilling screws eliminate

the need for pre-drilling • Low profile system virtually eliminates palpability

and produces superior aesthetic results • OsteoForm Mesh allows for contouring and

three-dimensional bending without creasing • A complete, cost effective solution for cranial flap

fixation • Sterile plates and screws are available in different

configuration

FeaturesOsteoMed's Auto-Drive® self-drilling screws are the only patented cruciform drive self-drilling screws available. These screws employ a cruciform drive head design, ensuring the applied axial force is distributed evenly throughout the screw head, while minimizing screw head stripping. The TaperLock self-retaining mechanism on the screw head ensures optimal stability during screw placement. The screws also utilize innovative Maximum Thread Area (MTA) technology that maximizes the area of bone-to-screw interface.


CRUCIFORM

CENTER DRIVE

Fast-Flap Neuro Fixation System•Fast Flap : CLINICAL PHOTOGRAPHS


•Fast Flap : CLINICAL PHOTOGRAPHS



•Fast Flap : CLINICAL PHOTOGRAPHS







Fast Flap: Testimonials/ KOLs

• Michael Muhonen, MD Orange, CA• David Greenwald, MD Titusville, FL• Salim Abdulrauf, MD St.Louis,MO• Robert Dickerman, MD Dallas, TX

Fast Flap: Target Customers

• Target Market– Neurosurgeons– Craniofacial reconstructive (trauma)– ENT/Neurologist

• Target locations– Teaching institutions– Private Hospitals

Fast Flap: Competitive Comparison

• WLorenz (BIOMET)– 1.5 System– Extensive Plate Selection– Rapid Fire Screw Driver– ThinFlap now with .3mm Profile with Screw Inserted.

• Osteomed Advantages– 1.2 System– Proven Low Profile System with Greater Plate

Selection– Ancillary Products

Fast Flap: Competitive Comparison• Stryker– 1.5 System– Tabbed Plates– Viper Self Drilling Screw– Extensive Plate Selection

• Osteomed Advantages– Low Profile Plates (Stryker Plates .5mm and .6mm)– Screw Selection (Stryker Only Offers 4mm and 5mm)– 1.2 System– Pre-Contoured Mesh– Ancillary Products


• Synthes Matrix Neuro– Plate/Screw profile .5mm– Self Drilling Screws– Extensive plate selection


Selection– Ancillary Products– Maximum Thread Area Technology


• KLS Martin– 1.5 System– Self Drilling Cross Drive Screw– Color Coded System


Selection– Ancillary Products– Maximum Thread Area Technology

Fast Flap: US Market Share

Fast Flap: Competitive Advantages

• Lowest profile plates• Wide selection of plates• 1.2mm and 1.6mm screw offering• Multiple shunt plate offering• Preformed mesh• Patented self drilling screw• 100% hand inspected and deburred

Fast Flap: Surgical Objective

– Craniotomies• Neurosurgeons cut a bone flap from the cranium to

gain access to the brain• The cranial flap is then set aside and re-attached after

the surgeon has completed the critical part of the surgery• The flap must then be rigidly fixated

– Cranial trauma• Fixation of fx and comminuted bone• High usage of mesh

Fast-Flap: Techniques

Fast Flap: Commonly Used Construct

– Plates and screw• Tri-angulation: 3 points of fixation• Screw length – contact with the dura

– 4mm is the safest

• Plate and defect positioning

Fast Flap: Tips & Tricks

• Couple with the OsteoDriver• When engaging the screw driver shaft into the

screw insure perpendicular insertion• Keep precontoured mesh in the system

Fast-Flap Neuro Fixation System Fast-Flap system Fast Flap Plates and Screws – 1.2mm – 1.6mm Low Profile Fast Flap Plates and Screws – 1.6mm Neuropack.

Documents

low profile fast flap

screw available

self drilling screws

instruments slide

screw head stripping

profile cp g3 slide

screw placement

safety screw