Direct Reading Gages | Page 22 www.dorseymetrology.com FAST CHECK THICKNESS GAGE Recommended for quick thickness checks of flat sheet materials and wide variety of small parts. Supplied with hardened steel gaging contacts, lifting levers, and clockwise continuous dial indicators. Special frames, throat depths, and contacts can be made to suit application. Available with ISO 17025 certification. Part #FC1 1/2" dia. anvils,1" opening, 2" throat depth, with 2DM500-10F .001" Grad. dial with .5" travel Part #FC2 Tube wall thickness 1.5" opening, 2" throat depth, .312 dia. lower anvil with part# 2DM1000-10F .001" Grad. dial with 1" travel Part #FC3 Spherical contacts 1.5" opening, 1" throat depth with part# 2DM1000-10F .001" Grad. dial with 1" travel Part #FC3-NI Frame and contacts, less indicator Part #FC1-NI Frame and contacts, less indicator Part #FC2-NI Frame and contact, less indicator
5
Embed
FAST CHECK THICKNESS GAGE · BG Series bench gages are universal indicating depth or flush pin gages used to check depths, lengths, face concentricity, or locations. The BG Direct
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Direct Reading Gages | Page 22
www.dorseymetrology.comFAST CHECK THICKNESS GAGERecommended for quick thickness checks of flat sheet materials and wide variety of small parts. Supplied with hardened steel gaging contacts, lifting levers, and clockwise continuous dial indicators. Special frames, throat depths, and contacts can be made to suit application. Available with ISO 17025 certification.
Part #FC1 1/2" dia. anvils,1" opening, 2" throat depth, with 2DM500-10F .001" Grad. dial with .5" travel
Part #FC2 Tube wall thickness
1.5" opening, 2" throat depth, .312 dia. lower anvil with part# 2DM1000-10F .001" Grad. dial with 1" travel
Part #FC3 Spherical contacts
1.5" opening, 1" throat depth with part# 2DM1000-10F .001" Grad. dial with 1" travel
Part #FC3-NI Frame and contacts, less indicator
Part #FC1-NI Frame and contacts, less indicator
Part #FC2-NI Frame and contact, less indicator
Direct Reading Gages | Page 23
845-454-3111 | 800-549-4243 DEPTH GAGES
FEATURES: ! Ground & hardened steel base. ! Base is .75" wide x .62" high. ! Holes located 1" and then 2" from end. ! Includes 3/8" dia indicator collet. ! Available with dial or digital indicators.
“V” BASE DIAL DEPTH GAGEUsed to measure depths of small holes, engravings, rivets, or slots with extreme accuracy. Knife edge base with center cut permits unobstructed view of point for exact positioning.
FEATURES: ! .125" Range. ! .0005" Graduation dial indicator. ! Ground hardened steel base. ! Base is 2.5" x .5". ! Interchangeable hardened steel gaging contact. ! Also available with digital indicator.
Shown is DDG-125C
BASES
DESCRIPTION PART #
2” long, 1 central hole C-512
3” long, 1 central hole C-513
4” long, 2 holes C-514
6” long, 3 holes C-516
8” long, 3 holes C-518
CONTACT EXTENSIONS
DESCRIPTION PART #
Contact 112
1” Extension 47071
2” Extension 47071-2
3” Extension 47071-3
4” Extension 47071-4
5” Extension 47071-5
Contact/extension set 6pc DDGCS
PART # DESCRIPTION
DDG-125B “V” Base dial depth gage with .0005” graduation, .125” range balanced dial (Mil. Spec.)
DDG-125C “V” Base dial depth gage with .0005” graduation, .125” range continuous dial
2DM125-05AY Replacement indicator, .0005” graduation, .125” range, balanced dial, push down series
2DM125-05GY Replacement indicator, .0005” graduation, .125” range, continuous dial, push down series
DDG-125NI “V” Base with contact, less indicator
DDG-CASE Fitted Storage Box
Indicator sold separately
Direct Reading Gages | Page 24
www.dorseymetrology.comBG DIRECT & BG2 BENCH GAGE
BG2 Bench Gage
The BG2 utilizes a right angle movement that offers substantial benefits. The indicator, in a protective housing, is mounted above the rest plate in a position that minimizes operator eye movement. The gaging mechanism is reversible, retractable, has a 3" range of measurement travel, and .075" of gaging travel.
BG Series bench gages are universal indicating depth or flush pin gages used to check depths, lengths, face concentricity, or locations. The BG Direct utilizes various models of dial or digital indicators. The indicator is protected from damage as it is enclosed beneath the gage itself. The rest plate is 3" x 5" hardened and ground steel which has a series of threaded holes. Special nesting rests or holding fixtures and clamps can be mounted to orient parts for measurement of specific dimensions.
Ball#4087-187-B
Shovel # 4082S
Taper#302
Flat #47076
Offset#2740
Mushroom # 297
Special contactsspecify A and B dimensions
Radius #112
Needle#3655
Top Plate Hole Pattern
PART # DESCRIPTION
BGD Model BG Direct with Part #112 steel pin contact and (1” range, .001” graduation) dial indicator
BGD-NI Model BG Direct with Part #112 steel pin contact less indicator
BGD-SET Model BG Direct with set of steel contacts (shown below) (1” range, .001” graduation) dial indicator
BGD-SETNI Model BG Direct with set of steel contacts less indicator
BGD-CASE Fitted Storage Case
PART # DESCRIPTION
BG2 Model BG with Part #112 steel pin contact and (.0005” graduation) dial indicator
BG2-NI Model BG with Part #112 steel pin contact and less indicator
BG2-SET Model BG with set of steel contacts (shown above) and (.0005” graduation) dial indicator
BG2-SETNI Model BG with set of steel contacts less indicator
O.D. – Chamfer Dial Indicator ModelsAX321-OD for DO-90- OD models ordering # B10710-DAX341-OD for DO-127- OD models ordering # B10715-D
I.D. – Countersink Dial Indicator ModelsAX321-ID for DC-90- ID models ordering # B10910-DAX341-ID for DC-127- ID models ordering # B10915-D
Digital Models Countersink & Chamfer ModelsProgrammable model inch / metric, 2:1 and 4:1 digital indicator ordering # MT5432:1 Ratio Digital Indicator with .0005” / 0.01mm graduation for DC-90- ID and DO-90- OD ordering # PG4600-3-450014:1 Ratio Digital Indicator with .0005” / 0.01mm graduation for DC-127- ID and DO-127- OD ordering # PG4600-3-450024:1 Ratio Digital Indicator with .001” / 0.02mm graduation for DC-127- ID and DO-127- OD ordering # PG1600-3-45001
* Special Order
Direct Reading Gages | Page 26
www.dorseymetrology.comSPECIAL APPLICATIONSIn addition to its already diverse product line of precision dimensional gaging instruments, Dorsey offers special applications to accommodate a variety of needs.