Fanless computer and flowchart- based software for multi-camera inspections 无风扇计算机及流程化软件在多相机检测系统中的应用.

Fanless computer and flowchart-Fanless computer and flowchart-based software for multi-camera based software for multi-camera

inspectionsinspections

无风扇计算机及流程化软件无风扇计算机及流程化软件在多相机检测系统中的应用在多相机检测系统中的应用

Vision China – Beijing 2013October 2013

Matrox 4Sight GPm


Matrox 4Sight GPm (cont.)

» Fanless vision system for the factory floor» Based on Ivy Bridge mobile dual-core CPUs

» Celeron, i3, or i7 CPUs

» 17 watt CPUs

» Quick Synch Video technology»H.264 encoding and decoding

» HM76 PCH (Platform Controller Hub)

» Integrated HDG 4000/2500‡ graphics‡ CPU dependant





» Up to 16 GB of DDR3 1600MHz memory

»Dual SODIMM

» Small ruggedized box

»22.5 cm x 15 cm x 6.8 cm (8.8” x 5.9” x 2.7”)

»no PCIe or PCI/104 expansion slots

» Single 2.5” SATA hard drive ‡

»250 GB capacity

‡ SSD options available



» One (1) mSATA connector

»For third-party SSD

» One (1) Mini PCIe connector

»For third-party Wi-Fi card

» Up to six (6) GigE ports

»Up to four (4) with Power over Ethernet (PoE)

»Two (2) conventional GigE ports

» Four (4) USB 3.0 and two (2) USB 2.0 ports



» One (1) RS232 and one (1) RS232/RS485 ports

» Two (2) DVI display ports

»One (1) DVI-I and one (1) DVI-D

» Stereo audio input and output

» 16 digital I/Os

»8 in / 8 out

»Terminal block connector



» 9-36V DC power in

»Terminal block connector

»No power supply included (optional accessory)

» 0 – 50°C (32 – 122°F) operating temperature

» Horizontal or vertical mounting





» Equipped with Windows Embedded Standard 7

»64-bit default

»32-bit user restored

»Both with multi-language support

» MIL run-time included

» Includes MIL license forGigE Vision and USB3 Vision


Matrox Design Assistant


Matrox Design Assistant overview

» Design Assistant is an intuitive,versatile and extendableintegrated developmentenvironment (IDE)

» Quickly configure and deploymachine vision applicationswithout the need for conventional programming


Matrox Design Assistant 3.0

» Deploy projects to Matrox Iris GTsmart camera



» Deploy projects to any PC and/or the Matrxo Iris GTsmart camera

Preliminary & subject to change


Design Assistant overview


Matrox Design Assistant (cont.)

» Matrox Design Assistant is hosted on a PC running Windows®

» Used to create inspection projects

» Construct and configure application flowchart

» Layout operator interface (HMI) to the application

» Project is then deployed to the target platform



Contextual guide for every step

Configure step

Navigateflowchart

View flowchart and Image, or operator interface layout

View step results

Run and test flowchart steps



» Deployed project runs independently of Design Assistant

» Interact with deployed project through » Operator View web page» discrete digital I/Os, serial link, Ethernet

(TCP/IP, EtherNet/IP™, MODBUS® and PROFINET)

» Operator View can be accessed remotely from Internet Explorer® or viewed locally



Image and annotations

Pass / Fail information

Inspection results

Operator inputs

Filmstrip

Internet Explorer



» Design Assistant 4.0 is the first software that combines machine vision application development for both smart cameras and generic PCs in a single integrated development environment



Matrox Design Assistant 4.0 (cont.)

» Develop a single inspection and deploy it to a Matrox smart camera and/or a PC» Same underlining vision library (MIL) used in

both cases»Expect the same results on either deployment

platform

» Save on multi platform development time»Learn the intuitive development software once

»Easier to maintain and service

»Train your technicians oncePreliminary & subject to change



» Design-time and run-time on the same PC orrun-time on a remote PC

» Capture from GigE Vision® andUSB3 Vision™ cameras

» Projects can handle multiple cameras

» Same project can be deployed on a Matrox Iris GT smart camera or any PC platform



» Support for TCP / UDP, EtherNet/IP™, MODBUS® and PROFINET communication

» Direct communication to select robot controllers

» Basic access to Matrox Imaging hardware discrete I/O»Real-time I/O support on 4Sight GPm

» Separate version for 32-bit and 64-bit Windows®





» Includes MultiCamHMI

»multi project viewing software

»visualize and control projects running in smart cameras and PCs simultaneously







» Design Assistant 4.0 will be available in Q2, 2014

» Included when purchasing a Matrox Iris GT smart camera

» Pre-installed on Matrox 4Sight GPm

» Sold separately for generic PCs



Matrox Imaging product line

Matrox Imaging Library (MIL)application development kit

+Matrox Design Assistant

Smart cameras(Matrox Iris GT)

Industrial visions computers(Matrox 4Sight GP / GPm, Supersight)

Frame grabbers(Matrox Solios family)

Vision processors(Matrox Radient family)


Thank you for attendingThank you for attending

感谢您的聆听！感谢您的聆听！

Fanless computer and flowchart- based software for multi-camera inspections 无风扇计算机及流程化软件在多相机检测系统中的应用.

Documents