INSULATING TUBES AND STICKS
Jun 27, 2015
INSULATING TUBES AND STICKS
INSULATING TUBES AND STICKS
■ Why a quality tube IEC 60855-1?
• Guarantee of absolute safety against electrical hazard
High insulating power no matter the environment of use origin ( interface foam / fiberglass / resin )
• Guarantee of the mechanical strength
• Guarantee of the performance over time
No alteration of the dielectric and mechanical properties High performance varnish(UV)
INSULATING TUBES AND STICKS
■ The foam-cored insulating tube IEC 60855-1
Uniform PU closed-cell foam(waterproof)
Foam-resin-fiberglass interface
Filling the open cells on the surface of the foam
3 longitudinal layers of fiberglass100% of the resistance operated in
flexion
2 transversal layers of fiberglass 100% of its strength operated in torsion
and compression
INSULATING TUBES AND STICKS
■ The foam-cored insulating tubes (foam filled)
What they show you What is hidden
INSULATING TUBES AND STICKS
■ CONCLUSION
FAMECA manufactures its foam-cored tube differently from its competitors :
The tube is manufactured directly around a sealed, rigid core of polyurethane foam instead of filling their tube with foam after the tube has been made
ASK FOR FAMECA IEC 60855-1 QUALITY
INSULATING TUBES AND STICKS
■ Our solution since 1996
• The IEC 60855-1 standard for foam-cored insulating tubes and insulating tubes manufactured in synthetic materials intended for live working tools and materials ( U>1 kV)
• Applied to all our insulating sticks