Model T9000 Electro-Pneumatic Pressure Controller Features Common Features of the T9000 Products • Fully functional keypad and display. • Backlit Liquid Crystal display screen. • Output pressure displays in psig, BAR, kPa, or user-defined pressure units. • Independently adjustable PID tuning coefficients. • Reverse acting capability for analog input and output signals. • Select Current or Voltage mode for input signal or optional analog channels using the keypad. • RFI/EMI protection eliminates electromagnetic and radio interference. Operating Principles The Model T9000 Series Pressure Controllers have a closed-loop, integrated, microprocessor control system that regu- lates outlet pressure. You can control the output from the Model T9000 products using the keypad or from an analog control signal. You can control the output from the Model T9000D using the keypad and through DeviceNet TM Communication network. The Feed and Bleed Solenoid Valves con- trol pressure in the Signal Chamber of the Booster Section. A pressure sensor mea- sures the outlet pressure and provides a feedback signal to the Electronics Section. Any variation in pressure between the set- point and the outlet pressure activates the Feed and Bleed Solenoid Valves to correct the output pressure. B Model T9000 T9000 T9020 T9040 T9060 T9080 Specialists in Valves, Controls, Pneumatics, Fluid Measurement Phone: (203) 261-6711 Fax: (203) 261-8331 • www.okcautomation.com
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Model T9000 Electro-Pneumatic Pressure Controller
FeaturesCommon Features of the T9000 Products•Fullyfunctionalkeypadanddisplay.•BacklitLiquidCrystaldisplayscreen.•Outputpressuredisplaysinpsig,BAR, kPa,oruser-definedpressureunits.•IndependentlyadjustablePIDtuning coefficients.•Reverseactingcapabilityforanaloginput andoutputsignals.•SelectCurrentorVoltagemodeforinput signaloroptionalanalogchannelsusing thekeypad.•RFI/EMIprotectioneliminates electromagneticandradiointerference.
Operating PrinciplesTheModelT9000SeriesPressureControllershaveaclosed-loop,integrated,microprocessorcontrolsystemthatregu-latesoutletpressure.YoucancontroltheoutputfromtheModelT9000productsusingthekeypadorfromananalogcontrolsignal.YoucancontroltheoutputfromtheModelT9000DusingthekeypadandthroughDeviceNetTMCommunicationnetwork.
TheFeedandBleedSolenoidValvescon-trolpressureintheSignalChamberoftheBoosterSection.Apressuresensormea-surestheoutletpressureandprovidesafeedbacksignaltotheElectronicsSection.Anyvariationinpressurebetweentheset-pointandtheoutletpressureactivatestheFeedandBleedSolenoidValvestocorrecttheoutputpressure.
BModel T9000
T9000
T9020
T9040
T9060
T9080
Specialists in Valves, Controls, Pneumatics, Fluid Measurement
Phone: (203) 261-6711Fax: (203) 261-8331 • www.okcautomation.com
BModel T9000
T9000
T9020
T9040
T9040Flow Rate (SCFM)110(187m3/HR)@150psig,[10BAR],(1000kPa)supply
Exhaust Flow (SCFM)55(94m3/HR)@60psig,[4BAR],(400kPa)downstreampressure
T9020Flow Rate (SCFM)90(153m3/HR)@150psig,[10BAR](1000kPA)supply
Exhaust Flow (SCFM)45(77m3/HR)@60psig[4BAR],(400kPa)downsteampressure
T9000Flow Rate (SCFM)1(1.7m3/HR)@150psig,[10BAR],(1000kPa)supply
Model T9000 Electro-Pneumatic Transducer
0
30
60
90
120
150
-10 0 10 20 30 40 50 60 70 80 90 100
Supply Pressure = 150 PSIG
Setpoint = 30 PSIG
Setpoint = 60 PSIG
Setpoint = 90 PSIG
Setpoint = 120 PSIG
Air Flow, SCFM
Out
put P
ress
ure,
PSI
G
Flow CharacteristicsT9020-4072N4NFS Pressure Controller
0
30
60
90
120
150
-20 0 20 40 60 80 100 120 140
Supply Pressure = 150 PSIG
Setpoint = 30 PSIG
Setpoint = 60 PSIG
Setpoint = 90 PSIG
Setpoint = 120 PSIG
Air Flow, SCFM
Out
put P
ress
ure,
PSI
G
Flow CharacteristicsT9040-4074N4FJT Pressure Controller
Specialists in Valves, Controls, Pneumatics, Fluid Measurement
Phone: (203) 261-6711Fax: (203) 261-8331 • www.okcautomation.com
Flow Rate (SCFM)220(375m3/HR)@150psig,[10BAR],(1000kPa)supply
Exhaust Flow (SCFM)110(187m3/HR)@60psig[4BAR],(400kPa)downsteampressure
Flow Rate (SCFM)700(1190m3/HR)@150psig,[10BAR],(1000kPa)supply
Exhaust Flow (SCFM)350(600m3/HR)@60psig[4BAR],(400kPa)downsteampressure
T9060 T9080
Model T9000 Electro-Pneumatic Transducer
0
30
60
90
120
150
0 50 100 150 200 250
Supply Pressure = 150 PSIG
Setpoint = 30 PSIG
Setpoint = 60 PSIG
Setpoint = 90 PSIG
Setpoint = 120 PSIG
Air Flow, SCFM
Out
put P
ress
ure,
PSI
G
Flow CharacteristicsT9060-4074N4FNT Pressure Controller
BModel T9000
Specialists in Valves, Controls, Pneumatics, Fluid Measurement
Phone: (203) 261-6711Fax: (203) 261-8331 • www.okcautomation.com
Model T9000 Electro-Pneumatic Transducer
InstallationForoperatinginstructions,refertothecorrespondingFairchildOperation and Maintenance Instructions,OM-500T90FI,OM-500T90AB,OM-500T90AO,OM-500T90DB,OM-500T90DI,OM-500T90DO.
Forinstallationinstructions,refertoII-500T9000.
Catalog InformationSpecificationsSupply Pressure1200psig,[14BAR],(1400kPa)MaximumPneumatic Outputs psig: 0-30 0-75 0-150 [BAR]: [0-2] [0-5] [0-10] (kPa): (0-200) (0-500) (0-1000) Minimum Span psig: 12 30 60 [BAR]: [0.8] [2.0] [4.0] (kPa): (80) (200) (400)
Input Signal4-20mA,0-10VDCFlow Rate1-700SCFM(Selectdesiredconfiguration)Exhaust Flow 1-350SCFM(Selectdesiredconfiguration)
Air Consumption 0@steadystateoutputwithDeadband@1%ofFullScale Supply Pressure EffectNoMeasurableEffectElectrical Supply24VDC±10%Power ConsumptionLessthan5wattsAnalog Output Signal / Impedence4-20mA/500ohmsMaximum,0-10VDC/400ohmsMinimumDeadband (ISA S51.1)Adjustablefrom0to10%ofFullScaleUnit Accuracy (ISA S51.1)Lessthan0.50%OutputSpanFrequency [email protected](typicalbutdependsonspecificT9000productconfiguration)Vibration EffectLessthan1%ofSpanunderthefollowingconditions:[email protected]@10g’sRFI/EMI EffectLessthan0.5%.EMCDirective89/336/EECEuropeanNormsEN50081-2&EN50082-2.Temperature Range0°Fto+160°F,(-18°Cto+71°C)Materials of Construction BodyHousing........Polymer,ChromateTreatedAluminumTrim........................................................ ZincPlatedSteelElastomers......................................... Nitrile,FluorocarbonFinish........................................................................Epoxy1 Supply Pressure must be no less than 5 psig, [0.35 BAR], (35 kPa) above
maximum output.
BModel T9000
Catalog Number T90
Flow Rate1 SCFM (Basic Transducer) ....... 0090 SCFM ……………………......... 20110 SCFM …………………......... 40220 SCFM……………………........ 60700 SCFM ……………………....... 80
Input0-10 VDC . . . . . . . . . . . . . . . . . . . . . . . 04-20 mA . . . . . . . . . . . . . . . . . . . . . . . . 4DeviceNet TM . . . . . . . . . . . . . . . . . . . . . D
Output0-30 psig. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 040-75 psig. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 050-150 psig. . . . . . . . . . . . . . . . . . . . . . . . . . . . 07[0-2.0 BAR] . . . . . . . . . . . . . . . . . . . . . . . . . . . 14[0-5.0 BAR] . . . . . . . . . . . . . . . . . . . . . . . . . . . 15[0-10.0 BAR] . . . . . . . . . . . . . . . . . . . . . . . . . . 17(0-200 kPa). . . . . . . . . . . . . . . . . . . . . . . . . . . 24(0-500 kPa). . . . . . . . . . . . . . . . . . . . . . . . . . . 25(0-1000 kPa). . . . . . . . . . . . . . . . . . . . . . . . . . 27
Port Size1/4" NPT (T9000,20,40 only) . . . . . . . . . . . . . . . . 023/8" NPT (T9020,40 only) . . . . . . . . . . . . . . . . . . 031/2” NPT (T9020,40 only) . . . . . . . . . . . . . . . . . . 043/4” NPT (T9060,80 only) . . . . . . . . . . . . . . . . . . 061” NPT (T9080 only) . . . . . . . . . . . . . . . . . . . . . . 08
Port ThreadsNPTF Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NBSPT Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UBSPP Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H
Feedback OptionNone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N0-10 VDC Analog Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04-20 MA Analog Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-10 VDC Feedback Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54-20 MA Feedback Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ElastomersNitrile (Not available in T9040). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NFluorocarbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . J
Power Failure ModeFreeze (Maintains Setpoint) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F
Exhaust PortTapped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E
Remote Pressure Sensing Capability (see table below)
Unique Feature of the T9000D•DeviceNetTMCommunicationsconnecttheModelT9000D toadigitalnetworktoincreasefunctionalflexibility, installationspeed,andreducesystemwiringcost.
Available Options for the T9000 Series Transducer•Optionalanalogoutputchannelconfiguredasanoutput pressuremonitororasauser-definedoutput.•ExternalPneumaticFeedbackporttosensedownstream pressure.(SeeCablesandAccessoriestable)•OptionalFeedbackInputChannelconfigurabletocontrol setpoint,externalprocessvariable,oracceptauser definedinput.(Consultfactoryforavailability.)
T9000 Cables and Accessories (sold separately)
Part Number Description 032-IPI-018-2Straight,Shielded6pinFemale032-IPI-019-2Rightangle,Shielded6pinFemale21655-1N1/8-27NPTFRemotePressureSensorfitting21655-1U1/8-28BSPTRemotePressureSensorfitting
Specialists in Valves, Controls, Pneumatics, Fluid Measurement
Phone: (203) 261-6711Fax: (203) 261-8331 • www.okcautomation.com
Related Documents
