1 Clas ss sic S Seri ies HORIZONTAL TURNING CENTERS Fadal 64LP CNC Controller
Fadal Classic Series CNC Turning Centers - Flyer
May 25, 2015
Fadal's Classic Series Turning Centers spec sheet. VMC Technologies is the exclusive Fadal dealer in Michigan. Call us at 248-786-3000 for questions about the Fadal turning centers.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
Classssic SSeriiesHORIZONTAL TURNING CENTERS
Fadal 64LP CNC Controller
Specifi cations
CLASSICC SERIESHORIZONTAL TURNING CENTERSwith Fadal 64LP CNC Controller
* Optional
www.Fadal.com844.FADAL.CNC
Models FG-5 FL-6 FL-8 FL-8L FL-10 FL-12
Chuck size (in.) 5 6 8 8 10 12
Bar capacity (in.) 1.26 1.77 2.05 2.59 3.03 3.62
Max. turning diameter (in.) 5.3 6.6 11.8 11.8 13.7 13.7
Max. swing over saddle (in.) 19.6 13 19.6 19.6 23.6 27.5
Max. turning length (in.) 3.93 9.8 15.75 23.6 23.6 23.6
Turret type gang / servo* servo servo servo servo servo
Number of tools 8* 12 12 12 12 12
Way construction Linear Roller Box Box Box Box
Max. spindle (RPM) 6,000 6,000 4,800 4,200 4,000 3,000
Spindle nose A2-3 A2-5 A2-6 A2-6 A2-8 A2-10
Spindle motor (hp) 7.5 10 20 20 25 30
Axis drive motors X-axis (hp) 1.1 1.7 2.4 2.4 3.9 3.9
Axis drive motors Z-axis (hp) 1.1 1.7 2.4 2.4 3.9 3.9
Ballscrew diameter X-axis (mm.) 25 32 32 32 32 32
Ballscrew diameter Z-axis (mm.) 25 32 40 40 40 40
Rapid traverse rate (ipm) 624 787 1,181 1,181 1,181 1,181
Cutting feed rate (ipm) 295 263 394 394 394 394
Accuracy positioning (in.) 0.0002 0.0002 0.0002 0.0002 0.0002 0.0002
Accuracy repeatablilty (in.) 0.0001 0.0001 0.0001 0.0001 0.0001 0.0001
Programmable tailstock N/A Quill Body & Quill Body & Quill Body & Quill Body & Quill
Quill diameter (in.) N/A 2.55 2.75 2.75 2.75 2.75
Tailstock quill travel (in.) N/A 2.95 3.14 3.14 3.14 3.14
Chip conveyor w/ chip bucket Optional Standard Standard Standard Standard Standard
Tool presetter N/A Standard Standard Standard Standard Standard
Parts catcher Optional Standard Standard Standard Optional Optional
Rigid tapping Standard Standard Standard Standard Standard Standard
Barfeeder interface Standard Standard Standard Standard Standard Standard
Coolant Pump Walrus multi-stage TPHK2T5-3
Air pressure required (PSI) 90 90 90 90 90 90
Power requirement at 220V (kVA) 15 20 25 25 30 35
Machine dimensions L x H x W includes
chip conveyor and chip bucket (in.)
93 x 67 x 57 121 x 71 x 62 143 x 74 x 63 151 x 85 x 67 151 x 85 x 67 151 x 85 x 67
Machine weight (lbs.) 3,476 5,390 9,920 11,440 11,770 12,320
Related Documents
