Faculty of Science and Technology 2017 Program … of Science and Technology 2017 Program Handbook About Federation University Australia… Welcome to Federation University AustraliaWe

Graduate Diploma of Mining Program Code: EQ4

CRICOS Code: 085622M

Master of Mining Engineering Program Code: EM9

CRICOS Code: 058663D

1800 811 711 [email protected] www.federation.edu.au CRICOS Provider No. 00103D

Faculty of Science and Technology

2017 Program Handbook

About Federation University Australia… Welcome to Federation University Australia. We are proudly regional in focus, national in scope and international in reach. Who should you know…

Greg You

Greg is the program coordinator for the Graduate Diploma of Mining and Master of Mining Engineering. Speak with him for academic advice on subject selection, credit transfer requests, special considerations etc.

+61 3 5327 9136 [email protected] Office Y221

Student HQ

The Student HQ provides support to you in person, online or over the phone. It is one central location on each campus where you can visit to get any assistance you need relating to your studies. Speak with your Student HQ for administrative advice on the application process, enrolment issues, leave from studies etc.

1800 FED UNI (1800 333 864) [email protected] Mt Helen: Ground floor of T Building

Gippsland: Room 242, Building 2W

Faculty of Science and Technology Mt Helen Campus

Federation University Australia PO Box 663

BALLARAT VIC 3353

Table of contents… 1 EQ4 Graduate Diploma of Mining.............................................................................. 4

1.1 Entry Requirements ........................................................................................................... 4

1.2 Credit Points ....................................................................................................................... 4

1.3 Duration ............................................................................................................................... 4

1.4 Program Overview ............................................................................................................. 4

1.5 Program Objectives ........................................................................................................... 5

1.6 Accreditation Status ........................................................................................................... 5

1.7 Program Delivery ............................................................................................................... 5

1.8 Student Support ................................................................................................................. 5

1.9 Program Structure .............................................................................................................. 6

1.10 Credit Transfer / Recognition of Prior Learning ............................................................. 6

1.10.1 Credit Transfer ............................................................................................................ 6

1.10.2 Recognition of Prior Experience .............................................................................. 6

2 EM9 Master of Mining Engineering .......................................................................... 7

2.1 Entry Requirements ........................................................................................................... 7

2.2 Credit Points ....................................................................................................................... 7

2.3 Duration ............................................................................................................................... 7

2.4 Program Overview ............................................................................................................. 7

2.5 Program Objectives ........................................................................................................... 7

2.6 Accreditation Status ........................................................................................................... 7

2.7 Program Delivery ............................................................................................................... 7

2.8 Student Support ................................................................................................................. 7

2.9 Program Structure .............................................................................................................. 8

2.10 Credit Transfer .................................................................................................................... 8

3 Progress Rules ........................................................................................................... 9

3.1 Intervention Counselling: .................................................................................................. 9

3.2 Unsatisfactory: .................................................................................................................... 9

3.3 Exclusion / Suspension: .................................................................................................... 9

3.4 Final Course Supplementary Assessment: .................................................................... 9

3.5 Term Commendation: ........................................................................................................ 9

4 Disputes ...................................................................................................................... 9

5 Course Summaries .................................................................................................. 10

Graduate Diploma of Mining / Master of Mining Engineering Handbook Faculty of Science and Technology, Mt Helen Campus, Federation University Australia

[ 4 ]

1 EQ4 Graduate Diploma of Mining 1.1 Entry Requirements The minimum requirement for entry to the program is a degree or diploma in an appropriate discipline from an Australian tertiary institution. Equivalent overseas qualifications may be accepted. A limited number of students with lesser qualifications but substantial industrial experience may also be admitted. The courses that make up this program are also available as short courses. Candidates for admission to the program are eligible to seek advanced standing into the program, in accordance with existing University regulations. 1.2 Credit Points 240 credit points 1.3 Duration 2 years full-time or part-time equivalent. 1.4 Program Overview This is a vocationally orientated program that provides students with the knowledge and skills that are necessary to obtain employment as an engineer and to be admitted as a Member with the Institution of Engineers, Australia or the Australasian Institute of Mining and Metallurgy. The program also serves as a preparation for further graduate studies in technology, business administration and other areas. The applied design theme has a distinctive industry focus targeting the mineral industry, as well as service-oriented private professional consultancy.


[ 5 ]

1.5 Program Objectives The program aims to:

• equip participants with a relevant coherent body of knowledge and provide them with a theoretical and practical understanding of mining.

• produce ethical and professional graduates with well-developed communication, teamwork and problem solving skills, who understand and engage with the social, environmental, and economic development of their communities.

• ensure that graduates exhibit the following characteristics, stipulated by Engineers Australia, that satisfy Engineers Australia Stage 1 Competencies:

• ability to apply knowledge of basic science and engineering fundamentals to broadly-defined problems and technology practice within the mining industry

• ability to search for and critically assess information relevant to mining engineering

• apply mathematical, numerical and computing techniques relevant to mining engineering

• in-depth technical competence in mining engineering;

• understanding of the social, cultural, global and environmental responsibilities associated with the application of technologies and appreciation of the principles of sustainability within the mining industry;

• ability to communicate effectively within the technical circles on mine sites as well as the community at large and other stakeholders;

• ability to function effectively as an individual and within teams, with the capacity to be a leader or manager as well as an effective team member;

• ability to manage mining projects, with an awareness of business and financial principles;

• commitment to safe, ethical and legal working practice and professional conduct; and

• appreciation of the importance of undertaking lifelong learning and continuous professional development.

1.6 Accreditation Status As a postgraduate program, the Graduate Diploma of Mining is not accredited by Engineers Australia or the Australasian Institute of Mining and Metallurgy. 1.7 Program Delivery Two years full-time or part-time equivalent, on campus in a block mode form or remotely via online delivery. It is administered from the Mt Helen campus. 1.8 Student Support The University has a wide range of student learning support facilities in place as described at http://federation.edu.au/current-students#Assistance_support_and_services


[ 6 ]

1.9 Program Structure Students must complete 16 courses, as detailed below. The bridging courses ideally should be completed first, unless you have received credit for these. They may be taken concurrently with the 5000 level subjects where availability or pre-requisite issues dictate. All other courses may be taken in the order that best suits your study availability. Bridging courses ENCOR 1015 Introductory Mathematics or equivalent ENCOR1150 Calculus or equivalent ENCOR 2100 Fluids and Thermofluids or equivalent SCGEO 1102 Earth Science or MGGGC5101 Geology for Engineers or equivalent Remaining courses ENMIN 5150 Company Economics and Finance ENMIN 5020 Mine safety and Environmental Engineering ENMIN 5021 Mine Surveying ENMIN 5130 Underground Production Systems ENMIN 5018 Surface Mining Operations and Equipment ENMIN 5160 Rock Mechanics Applications ENMIN 5140 Materials Handling and Hoisting ENMIN 5023 Mine Ventilation ENMIN 5100 Mine Power Supply and Drainage ENMIN 5110 Production Drilling and Blasting ENMIN 5120 Tunnelling and Mine Development ENMIN7010 Mine Planning and Scheduling Brief course outlines are provided in Appendix 1, full course outlines detailing the objectives, content and assessment are provided online: http://federation.edu.au/faculties-and-schools/faculty-of-science-and-technology/student-resources/course-outlines. All courses are available for study by current Federation University Australia students as electives, with the approval of the relevant program coordinators, and by non-Federation University Australia students as single non-award study courses.

1.10 Credit Transfer / Recognition of Prior Learning Credit transfer and recognition of prior learning will be given according to the current University Credit Regulations. . For this program the maximum number of exemptions permitted will normally be eight 15-credit point courses.

1.10.1 Credit Transfer Studies used as the basis for claims for advanced standing must normally be graduate studies and must not have been used to meet the requirements of another award. They will normally have been completed within a period of five years prior to the date of application for advanced standing.

1.10.2 Recognition of Prior Experience As well as recognising credit for previous studies the University also has a policy of recognition of prior learning (RPL). Students wishing to discuss possible RPL with the Discipline Coordinator should do so prior to, or at enrolment.

http://federation.edu.au/faculties-and-schools/faculty-of-science-and-technology/student-resources/course-outlines

http://federation.edu.au/faculties-and-schools/faculty-of-science-and-technology/student-resources/course-outlines


[ 7 ]

2 EM9 Master of Mining Engineering 2.1 Entry Requirements Completion of three or four year degree in Mining Engineering, or a Graduate Diploma of Mining from FedUni, the WA School of Mines or the University of New South Wales 2.2 Credit Points 180 credit points 2.3 Duration 1.5 years full-time or part-time equivalent. 2.4 Program Overview The program allows for the flexible delivery of advanced subjects in the area of Mining Engineering to enable working Engineers to understand advanced concepts, and to develop skills in applying these concepts in the mining industry. The program is designed to provide advanced education across a range of mining engineering subjects and not to focus on a single area of study 2.5 Program Objectives Upon successfully completing this program, students should be able to:

• Explain fundamental Engineering concepts at an advanced level in selected Mining industry areas; • Describe and explain technical systems in a wide range of Mining Engineering applications; • Apply the visualisation of three-dimensional space to the solution of Mining Engineering design

problems; • Perform research and development tasks. • Appreciate the responsibilities of Mining Engineers in relation to the environment and sustainable

development. 2.6 Accreditation Status The program is not accredited by Engineers Australia or the Australasian Institute of Mining and Metallurgy as it is a postgraduate program. 2.7 Program Delivery One and a half years full-time or part-time equivalent on campus in a block mode form, or remotely via online delivery. It is administered from the Mt Helen campus. 2.8 Student Support The University has a wide range of student learning support facilities in place as described at http://federation.edu.au/current-students#Assistance_support_and_services


[ 8 ]

2.9 Program Structure Students must complete a research project comprising the following three courses:

• ENMIN7091 Mining Research Project 1, Research Methodology • ENMIN7092 Mining Research Project 2 • ENMIN7093 Mining Research Project 3

Students must also complete 8 elective courses taken from the following list: • ENMIN 5100 Mine Power Supply & Drainage • ENMIN 5110 Production Drilling & Blasting • ENMIN 5120 Tunnelling & Mine Development • ENMIN 5130 Underground Production Systems • ENMIN 5140 Materials Handling & Hoisting • ENMIN 5150 Company Economics & Finance • ENMIN 5160 Rock Mechanics Applications • ENMIN 5017 Ore Reserve Estimation • ENMIN 5018 Surface Mining Operations & Equipment • ENMIN 5019 Computer Applications In Mining • ENMIN 5020 Mine Safety & Environmental Engineering • ENMIN 5021 Mine Surveying • ENMIN 5023 Mine Ventilation • ENMIN 7010 Mine Planning and Scheduling • ENMIN7020 Advanced Mine Ventilation • ENMIN7030 Advanced Rock Mechanics • ENMIN7040 Advanced Rock Breakage • ENMIN7050 Mine Environment Engineering

All courses are available for study by current Federation University Australia students as electives, with the approval of the relevant program coordinators, and by non-Federation University Australia students as single non-award study courses.

2.10 Credit Transfer Credit transfer will be given according to the current University Credit Regulations. For this program the maximum number of exemptions permitted will normally be four 15-credit point courses. Studies used as the basis for claims for advanced standing must normally be graduate studies and must not have been used to meet the requirements of another award. They will normally have been completed within a period of five years prior to the date of application for advanced standing. Students who complete the Graduate Diploma of Mining with Federation University will typically receive credit for four elective courses into the Master of Mining Engineering.


[ 9 ]

3 Progress Rules 3.1 Intervention Counselling: Students that fail a course will be contacted via email and advised to contact their coordinator to seek advice on how to address the issues that contributed to the result. 3.2 Unsatisfactory: Students who fail in 50% or more of the courses in which they are enrolled in any semester will be regarded as having unsatisfactory progress. Any student who has not passed a course after two attempts will be regarded as having unsatisfactory progress. 3.3 Exclusion / Suspension: Following unsatisfactory progress, by failing in 50% or more of the courses in which a student is enrolled, in two consecutive semesters, students will be asked to show cause why they should not be excluded from the program. Unless a satisfactory response is received by the School Programs Committee the student may be excluded from the program for a period of up to two years. Any student who has not passed a course after three attempts may be excluded from the program for a period of up to two years. 3.4 Final Course Supplementary Assessment: Students who receive an MF grade in a course administered by the Faculty of Science and Technology in their final Semester may apply to the Coordinator of Programs within 7 days of the publication of results for supplementary assessment if that course is the only outstanding course required to complete the degree. The highest grade attainable will be a Pass grade. 3.5 Term Commendation: Students that achieve a grade of High Distinction (HD) in at least half of the courses they study in a teaching period, receive nothing less than a Distinction (D) in the remaining courses in that teaching period, and who are enrolled in at least 2 courses of their program in that teaching period, will receive a letter of commendation from their School. 4 Disputes Any disputes will be resolved according to the regulations of the Federation University Australia. Students should familiarise themselves with the formal Student Grievance procedures for the University, available online: https://federation.edu.au/staff/governance/legal/grievances-and-complaints/student-grievances .

https://federation.edu.au/staff/governance/legal/grievances-and-complaints/student-grievances

[ 1 0 ]

5 Course Summaries ENCOR1015 INTRODUCTORY MATHEMATICS Faculty / Portfolio: Faculty of Science and Technology Program Level:

AQF Level of Program 5 6 7 8 9 10 Level Introductory Intermediate Advanced

Pre-requisites: Nil Co-requisites: Nil Exclusions: (MATHS1000) Credit Points: 15 This course allows students to see the relevance of mathematics in engineering practice. Various concepts and techniques in elementary mathematics will be introduced/reviewed that will equip students for further mathematical and engineering courses. ENCOR1150 CALCULUS Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: (ENCOR1015 or MTHGC1020) Co-requisites: Nil Exclusions: (ENCOR1030 and ENCOR1140) Credit Points: 15 This course introduces students to Elementary Calculus: including rates of change, differentiation and integration techniques for a range of functions;

[ 1 1 ]

ENCOR2100 FLUIDS AND THERMOFLUIDS Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR1015 Co-requisites: Nil Exclusions: (ENCOR2011) Credit Points: 15 This course is an introduction to two important areas of engineering being fluid mechanics and thermodynamics. All of the fundamental aspects of fluid mechanics including pressure measurement, hydrostatics, continuity, momentum and energy equations will be covered. An introduction to thermodynamics will also be provided and will cover the zeroth, first and second laws, and work and energy analysis. ENMIN5017 ORE RESERVE ESTIMATION Formerly: EG410 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR 1015, ENCOR 1140, ENCOR 2100 or equivalent prior learning Co-requisites: Nil Exclusions: (EG410) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of ore reserve estimation and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work as a mining engineer and allow them to undertake further study.

[ 1 2 ]

ENMIN5018 SURFACE MINING OPERATIONS & EQUIPMENT Formerly: EG411 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR1015, ENCOR1140 & ENCOR2100 or equivalent prior learning Co-requisites: Nil Exclusions: (EG411) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of surface mining and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study. ENMIN5019 COMPUTER APPLICATIONS IN MINING Formerly: EG412 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR 1015, ENCOR 1140, ENCOR 2100 or equivalent prior learning Co-requisites: Nil Exclusions: (EG412) Credit Points: 15 This course qualifies students to apply an intermediate body of knowledge in the area of computer aided design in mining. Students will be able to apply a broad range of mining engineering concepts within the area of surface and underground mine design. This course will enable the students to undertake professional or highly skilled work within the mining industry and will provide a platform for further studies.

[ 1 3 ]

ENMIN5020 MINE SAFETY & ENVIRONMENTAL ENGINEERING Formerly: EG413 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR1015, ENCOR1040 & ENCOR2100 or equivalent prior learning Co-requisites: Nil Exclusions: (EG413) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of mine safety and environmental engineering and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study. ENMIN5021 MINE SURVEYING Formerly: EG414 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR 1015, ENCOR 1140 or equivalent prior learning Co-requisites: Nil Exclusions: (EG414) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of mine surveying and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work as within the mining industry and allow them to undertake further study.

[ 1 4 ]

ENMIN5023 MINE VENTILATION Formerly: EG416 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR1015, ENCOR1140 & ENCOR2100 or equivalent prior learning Co-requisites: Nil Exclusions: (EG416) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of mine ventilation and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study. ENMIN5100 MINE POWER SUPPLY & DRAINAGE Formerly: EG401 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR1015, ENCOR1140 & ENCOR2100 or equivalent prior learning Co-requisites: Nil Exclusions: (EG401) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of mine power supply and drainage and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study.

[ 1 5 ]

ENMIN5110 PRODUCTION DRILLING & BLASTING Formerly: EG402 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR 1015 and ENCOR 1140 or equivalent prior learning Co-requisites: Nil Exclusions: (EG402) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of drilling and blasting in mining and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study. ENMIN5120 TUNNELLING & MINE DEVELOPMENT Formerly: EG403 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR 1015 and ENCOR 1140 or equivalent prior learning Co-requisites: Nil Exclusions: (EG403) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of underground mine development and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study.

[ 1 6 ]

ENMIN5130 UNDERGROUND PRODUCTION SYSTEMS Formerly: EG404 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR 1015 and ENCOR 1140 or equivalent prior learning Co-requisites: Nil Exclusions: (EG404) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of underground mining and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study. ENMIN5140 MATERIALS HANDLING & HOISTING Formerly: EG405 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR 1015 and ENCOR 1140 or equivalent prior learning Co-requisites: Nil Exclusions: (EG405) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of surface and underground loading, haulage and hoisting and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study.

[ 1 7 ]

ENMIN5150 COMPANY ECONOMICS & FINANCE Formerly: EG408 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR 1015 and ENCOR 1140 or equivalent prior learning Co-requisites: Nil Exclusions: (EG408) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of mineral economics and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study. ENMIN5160 ROCK MECHANICS APPLICATIONS Formerly: EG409 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENCOR 1015 and ENCOR 1140 or equivalent prior learning Co-requisites: Nil Exclusions: (EG409) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of rock and soil mechanics and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study

[ 1 8 ]

ENMIN7010 MINE PLANNING & SCHEDULING Formerly: EK821 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENMIN 5018 and ENMIN 5130 or EG 411 and EG 404 or equivalent Co-requisites: Nil Exclusions: (EK821) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of surface and underground mining and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study. ENMIN7020 ADVANCED MINE VENTILATION Formerly: EK822 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENMIN 5023 or EG 415 or EG 416 or equivalent Co-requisites: Nil Exclusions: (EK822) Credit Points: 15 This course qualifies participants to apply an advanced body of knowledge in the area of mine ventilation and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study

[ 1 9 ]

ENMIN7030 ADVANCED ROCK MECHANICS Formerly: EK823 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENMIN 5160 or EG 409 or equivalent Co-requisites: Nil Exclusions: (EK823) Credit Points: 15 This course qualifies participants to apply an highly advanced body of knowledge in the area of rock and soil mechanics and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study. ENMIN7050 MINE ENVIRONMENT ENGINEERING Formerly: EK825 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: Nil Co-requisites: Nil Exclusions: (EK825) Credit Points: 15 Student will develop a body of knowledge relating to environmental issues that can be caused by mining operations and what can be done to either mitigate or remove the problems. Whilst engineering options are a focus alternative techniques are also discussed.

[ 2 0 ]

ENMIN7040 ADVANCED ROCK BREAKAGE Formerly: EK824 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENMIN 5110 or EG 402 or equivalent Co-requisites: Nil Exclusions: (EK824) Credit Points: 15 This course qualifies participants to apply a highly advanced body of knowledge in the area of drilling and blasting in mining and equips them with highly developed skills for research and enquiry. Students enrolled in this course will be able to apply the body of knowledge to a range of contexts within the mining industry enabling them to undertake professional or highly skilled work within the mining industry and allow them to undertake further study. ENMIN7091 MINING RESEARCH PROJECT 1 RESEARCH METHODOLOGY Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: Nil Co-requisites: Nil Exclusions: ENCOR 7010 Credit Points: 15 This course equips participants with advanced knowledge and deep understanding of the methodology and procedure followed to design and conduct research projects. The course has been designed to deliver graduates with highly developed analytical, critical and communication skills who can perform autonomously, and who are fully qualified to readily engage in further learning and research endeavours.

[ 2 1 ]

ENMIN7092 MINING RESEARCH PROJECT 2 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENMIN 7091 Co-requisites: Nil Exclusions: ENCOR 7020 Credit Points: 15 This course is intended to monitor and assist students` progress in the second semester of their major research project. Students will have to produce update submissions to highlight their progress and demonstrate their advanced understanding of the topic being researched and their ability to synthesis solutions and apply deep comprehension of theory to practice. ENMIN7093 MINING RESEARCH PROJECT 3 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: ENMIN 7092 Co-requisites: Nil Exclusions: ENCOR 7030 Credit Points: 30 In this course, students utilise the experience and knowledge acquired from their study program to complete their projects and write theses on their findings. In the process, students will employ hands-on, analytical and computing skills relevant to their fields of studies.

[ 2 2 ]

SCGEO1102 EARTH SCIENCES Formerly: SX511 Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: Nil Co-requisites: Nil Exclusions: (SX511) Credit Points: 15 The main objective is to introduce students to the science and terminology of modern geology, which addresses concepts such as the formation of Earth, the Solar System and Universe; rocks and minerals; and the dynamic systems that shape the Earth's surface (i.e. Plate Tectonics, volcanoes, and weathering). MGGGC5101 GEOLOGY FOR ENGINEERS Faculty / Portfolio: Faculty of Science and Technology Program Level:


Pre-requisites: Nil Co-requisites: Nil Exclusions: Nil Credit Points: 15 This unit introduces the aspects of applied geology that are essential to provide a wide basis for understanding of later studies in engineering geology and geotechnical engineering. The unit builds from the broad science of geology into a coherent grouping of knowledge and simple skills for future practical needs like evaluating surface or in-pit stratigraphy and rock types; the likely disposition of rocks and their presentation; plus key aspects of how rock masses will weather and erode in nature. Basic principles of lithology, stratigraphy and structural geology are introduced and related to a geological map context. Building upon this base, the breakdown of rocks and sediments, erosion, landform development including simplest ideas of slope stability are introduced. This leads to an expanded consideration of rocks in an engineering context and consideration of the effects of seismicity, groundwater and rheology on rock mass performance and manipulation.

Faculty of Science and Technology 2017 Program … of Science and Technology 2017 Program Handbook About Federation University Australia… Welcome to Federation University AustraliaWe

Documents