Reusable Fabric Face Mask Basic Product Portfolio—Update 5.0 Designed and brought to production in Israel by Rinat Peleg Hermoni in cooperation with: Ministry of Health Approved Ministry of Health Approved
Reusable Fabric Face Mask
Basic Product Portfolio—Update 5.0
Designed and brought to production in Israel by Rinat Peleg Hermoni
in cooperation with:
Ministry of Health Approved
Ministry of Health Approved
Table of Contents
1. Approved fabric types
2. Cutting and manufacturing
3. How to wear the mask
4. Approval
5. Quality and durability
6. General Requirements
Page 1
Page 1-2
Page 3
Page 3-4
Page 5
Page 5
Basic Product Portfolio—Update 5.0 May 2020Reusable Fabric Face Mask
General:
This document defines the guidelines for manufacturing and packaging fabric face masks.
1. Approved fabric types:
1.1 Satin 500, col. White: 1.1.1 Composition: 100% cotton 1.1.2 Weight: 133 gr/sqm 1.1.3 Yarn count: 80/1, 100/1 1.1.4 Density: 205x(88*3) 1.1.5 Construction: Satin weave
1.3 For health reasons, the fabrics must not be dyed nor finished with harmful chemicals or substances.1.4 Formaldehyde softener and "Wrinkle Free" chemicals are forbidden.1.5 Approved fabric shrinkage up to 3%.1.6 Fabrics should be confirmed with OEKO-TEX 100 standard, level 1, valid to the date of production and finishing of fabric.
1.2 Percale 200, col. White: 1.2.1 Composition: 100% cotton 1.2.2 Weight: 126 gr/sqm 1.2.3 Yarn count: 40/1, 40/1 1.2.4 Density: 90/110 1.2.5 Construction: 1/1
2. Cutting and manufacturing:
2.1 Mask sizes: XS: 6–8 years | S: 9–12 years | M: 13–15 years | L: Adult | XL: Beards.2.2 The cut is based on a two-layered rectangular shape, as shown below:
Production Guide
Stage
Seam allowance
Fold with the left sideof the fabric on the inside
A
1 cm 1 cm
A
A
A
B
C
C
B
1Stage
2
-1-
Basic Product Portfolio—Update 5.0 May 2020Reusable Fabric Face Mask
Sew the rubber band between the two layers of fabric, with the loop facing inwards.
Leave a 7 cm opening for reversing the fabric.
Fabric folding line
Rubber band (gross)
To make the fold after turning the cuff, make a mark and fold accordingly.
A A
C
F
F G
G
E
E
S
S
R
Label location
Fold
Place a label upper right (fold as indicated) and make an upper stitch according to the mark.
S/R - Length of Rubber band will be adjusted according to actual material.
Final product dimensions
Sewing direction
Stage
4Stage
Reinforcement
Reinforcement
Reinforcement
3
Stage
6
C
D
A
B
C
D
E
F
G
S
R
XS S MDimensions (in centimeters)
L XL19
38
20.518
18.5
9.54.5
19
18
20
40
21.519
19.5
10.55
19
18
18
36
19.517
17.5
8.54
17.5
16.5
17
34
18.516
16.5
7.53.5
16.5
15.5
16
(6-8) (9-12) (13-15) (Adult) (Beard)
32
17.515
15.5
6.53
15.5
14.5
Stage
Half-way point
5
G
G
G
G
-2-
16mm
20mm
תשרד הבריאו
משור
באי
תנה100% כו
טנזשע
ש ש
ללא ח60
16mm
20mm
תשרד הבריאו
משור
באי
תנה100% כו
טנזשע
ש ש
ללא ח60
2. Cutting and manufacturing:
Basic Product Portfolio—Update 5.0 May 2020Reusable Fabric Face Mask
3. How to wear the mask:
4. Approval:
4.1 The production method must be according to the specifications.4.2 Prior to production, the sewing method and finished product must be approved by the client.4.3 Do not use fabric that is not cut the warp direction.4.4 The product must be manufactured according to the specifications, with emphasis on reinforcement at the beginning and end of the stitch, continuous stitching, consistent stitch size, reinforcement of the connection of the rubber band to the mask, symmetry, absence of distortion, meticulous final dimensions, cleanliness, and finish.4.5 Before starting any new batch, materials and methods must be approved.4.6 Product must be approved according to the guidelines on the website: https://go.gov.il/masks-production-en
-3-
Basic Product Portfolio—Update 5.0 May 2020Reusable Fabric Face Mask
4. Approval:
4.7 Prepare a template for each mask size according to the following dimension table:
22.5
18.5
4.52.5
7.5
19.5
22.5
19.5
52.75
7.5
19.5
22.5
17.5
42.25
7.5
19.5
22.5
16.5
3.52
7.5
19.5
22.5
15.5
31.75
7.5
19.5
A
B
C
D
E
F
XS S MDimensions (in centimeters)
L XL
A
B
C
D
D
E E
F
-4-
Basic Product Portfolio—Update 5.0 May 2020Reusable Fabric Face Mask
5. Quality and durability:
5.1 Stitch two layers of fabric together for each mask.5.2 User Bartck-stitch or upper-stitch to reinforce each of the four rubber band connection points to the fabric.
6. General requirements:
6.1 Ensure that there are no wool or linen fibers at all in the finished product. To clarify, the product will be free of "Shatnez" (in accordance with Jewish law), and a manufacturer's declaration to this effect is required.6.2 To avoid contamination, all those involved in manufacturing the masks must wash their hands thoroughly with soap and put on a face mask before starting work.6.3 Warning: Not suitable for children under 6 years of age. To avoid danger of suffocation, use the product according to instructions. This product is not a toy.
-5-
Basic Product Portfolio—Update 5.0 May 2020Reusable Fabric Face Mask