This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ねじ用限界ゲージLIMIT GAUGES FOR SCREW THREADS
標準ねじゲージSTANDARD SCREW THREAD GAUGES
管用平行ねじゲージLIMIT GAUGES FOR PARALLEL PIPE THREADS
管用テーパねじゲージGAUGES FOR TAPER PIPE THREADS
米式管用テーパねじゲージ(NPT)GAUGES FOR ANSI TAPER PIPE THREADS(NPT)
米式管用テーパねじゲージ(NPTF)GAUGES FOR ANSI TAPER PIPE THREADS(NPTF)
OSG's superior technology and long experience with thread grinding technique ensures that our thread gauges are of the highest quality and accuracy. We use the most advanced materials, heat treatment furnaces, and manufacturing facilities, in order to provide ultimate precision.
ねじ用限界ゲージLimit gauges for screw threads LG(P.591参照)(see page 591)
通り側と止り側で1組となっており、通り側が通り、止り側が2回転を超えてねじ込まなければ、そのねじは合格となります。ねじ規格と同じ等級に定められており、使用目的により工作用と検査用がありますが、ISO方式では類別がありません。The GO and NOT GO ends of the gauge form one set, and the thread standard and class are prescribed. For the NOT GO side, there is a JIS method for manufacturing and inspection, but no ISO classification.
管用ねじゲージGauges for pipe threads LG, TG(P.594参照)(see page 594)
管用ねじには管用平行ねじと管用テーパねじの2種があります。管用平行ねじゲージの使用法はねじ用限界ゲージと同様ですが、管用テーパねじゲージは端面に切欠きがあり製品の末端が切欠きの範囲にあれば合格となります。ANSI規格ではさらに基準寸法の位置を示すため3段または4段の切欠きとなっています。Parallel pipe thread gauges are the same as screw thread limit gauges; the GO and NOT GO side form one set. Taper pipe thread gauges, however, have special notches. Both taper pipe plug gauges and taper thread ring gauges are available.
穴と軸の互換性を確保するために必要なゲージです。穴または軸の最大実体寸法を基準とした測定面と最小実体寸法を基準とした測定面とを持つゲージです。This gauge is used to guarantee hole and shaft interchangeability. The GO and NOT GO ends of the gauge form one set, and are used to standardize maximum and minimum tolerable measurements for holes and shafts.
ねじの基準山形および基準寸法に正しく作られたゲージで互いに無理なく遊びなくはめ合うプラグとリングで1組となっております。This is a standard measurement gauge that also has correct thread standard angle. One set includes a thread-plug and thread ring gauge. These gauges should never be forced, nor should they fit too loosely.
ゲージや比較測定器(シリンダゲージ、指針測微器、空気マイクロメータ、ダイヤルゲージを利用した測定機器など)の寸法設定および点検管理の寸法基準として用いるゲージです。This gauge is used for measurement standardization of other gauges as well as controlling measurements of established comparative indicators. It should not be used directly on finished products or parts.
To determine thread standard and class of screw thread limit gauges, threads are tested by the two limit method GO and NOT GO system. For the NOT GO side there is a specified JIS method and standard, but no ISO classification.
■ねじ用限界ゲージの種類と記号 Symbols of Limit Gauges for Screw Threads
検査されるねじScrew thread to be inspected
ISO導入 JIS 規格のゲージISO
従来 JIS 規格のゲージ JIS
種 類Gauge type
記 号Symbol
種 類Gauge type
記 号Symbol
おねじExternal thread 有効径
Pitch diameter
通りねじリングゲージGO screw ring gauge
止りねじリングゲージNOT GO screw ring gauge
GR
NR
通りねじリングゲージ(工、検)GO screw ring gauge工作用止りリングゲージNOT GO screw ring gauge for machine work検査用止りねじリングゲージNOT GO screw ring gauge for inspection
GR
WR
IR
外径Major diameter
外径用通りリングゲージPlain GO ring gauge for major diameter
外径用止りリングゲージPlain NOT GO ring gauge for major diameter
外径用挟みゲージPlain calliper gauge for major diameter
PR 通PR go
PR止PR not-go
PC
-
-
工作用限界挟みゲージLimit snap gauge for machine work検査用限界挟みゲージLimit snap gauge for inspection
-
-
WS
IS
めねじInternal thread 有効径
Pitch diameter
通りねじプラグゲージGO screw plug gauge
止りねじプラグゲージNOT GO screw plug gauge
GP
NP
通りねじプラグゲージ(工、検)GO screw plug gauge工作用止りプラグゲージNOT GO screw plug gauge for machine work検査用止りねじプラグゲージNOT GO screw plug gauge for inspection
GP
WP
IP
内径Minor diameter
内径用プラグゲージPlain plug gauge for minor diameter
PP工作用限界プラグゲージLimit plug gauge for machine work検査用限界プラグゲージLimit plug gauge for inspection
WM
IM
点検されるねじ用限界ゲージLimit gauges for screw threads to be inspected
ISO 導入 JIS 規格のゲージISO
従来 JIS 規格のゲージ JIS
種 類Gauge type
記 号Symbol
種 類Gauge type
記 号Symbol
通りねじリングゲージGO screw ring gauge
通り点検プラグGO check plug for GO screw ring gauge
止り点検プラグNOT GO check plug for GO screw ring gauge
-摩耗点検プラグWear check plug for GO screw ring gauge
GRGF
GRNF
-GW
-
-通り側はめあい点検ねじプラグゲージScrew plug gauge for checking fit of GO side
通り側摩耗点検ねじプラグゲージScrew plug gauge for checking wear of GO side
-
-
GF
GW
止りねじリングゲージNOT GO screw ring gauge
通り点検プラグGO check plug for NOT GO screw ring gauge
止り点検プラグNOT GO check plug for NOT GO screw ring gauge
-
-摩耗点検プラグWear check plug for NOT GO screw ring gauge
NRGF
NRNF
-
-
NW
-
-工作用止り側はめあい点検ねじプラグゲージScrew plug gauge for checking fit of NOT GO side for machine work
検査用止り側はめあい点検ねじプラグゲージScrew plug gauge for checking fit of NOT GO side for inspection
-
-
-WF
IF
■点検用ゲージの種類と記号 Symbols of Gauges for Check
↑シール位置
592
ねじゲージシリーズ GAUGES
FEATURES
特
長
GAUGES
ゲージ
GAUGES
ねじゲージシリーズ
■おねじとおねじ用限界ゲージ・点検用ゲージの公差相互の関係位置説明図Mutually related positions of external screw thread, limit gauge for external screw thread and gauge for checking explanation figure.
ISO導入JIS規格おねじ6g、8gねじ用の例 Example for ISO 6g, 8g
従来JIS規格おねじ2、3級ねじ用の例 Example for JIS class 2, 3 external thread
外径用はさみゲージPlain calliper gauge for major diameter
外径用リングゲージPlain ring gauge for major diameter
通りGO side
止りNOT-GO side
従来JISのおねじ用ゲージJIS
ISO導入JISおねじ用ゲージISO
外径用ゲージGauge for major diameter
外径用ゲージGauge for major diameterr
検査用 限界挟みゲージ
工作用 限界挟みゲージ
外径用挟みゲージ
外径用リングゲージ
止り側NOT GO side
通り側GO side
止り側NOT GO side
通り側GO side
通り側GO side
止り側NOT GO side
IS WS PC PR外径の基準寸法の位置(Position of basic dimension of major diameter)
おねじの外径Majordiameterof externalthread
図の中の許容域又は摩耗しろの図示は、それぞれ次の意味を示す。The illustrations for the tolerance zone of wear margin in the above fi gures show the following:
おねじの有効径又は外径公差Tolerance on pitch diameter or major diameter of external thread
ねじリングゲージ又は挟みゲージ及びリングゲージの公差Tolerance on screw ring gauge, snap gauge or ring gauge
ISOゲージ方式は、メートルねじ ISO等級のねじにのみ適用されます。ISO system for gauge applies only to Metric thread ISO class.
最小摩耗しろMinimum margin for wear
ねじプラグゲージ又はプラグゲージの公差Tolerance on screw plug or plug gauge
おねじ基準山形basic profi le of external
screw thread
従来JISのおねじ用ゲージ(点検用ゲージを含む)JIS
ISO導入JISおねじ用ゲージ(点検用ゲージを含む)ISOおねじ
の有効径Pitchdiameterof externalthread
有効径用ゲージGauge for pitch diameter
有効径用ゲージGauge for pitch diameter
同右用はめあい点検
ねじプラグ
ゲージ
検査用
止り
ねじリング
ゲージ
同右用はめあい点検
ねじプラグ
ゲージ
工作用
止り
ねじリング
ゲージ
同右用摩耗点検ねじ
プラグゲージ
はめあい点検
ねじプラグ
ゲージ
通りねじリング
ゲージ
(工作、検査共用)
IF IR WF WR GW GF GR
有効径の基準寸法の位置(Position of basic dimension of pitch diameter)
通りねじ
リングゲージ
同左用通り点検
プラグ
止り点検
プラグ
摩耗点検
プラグ
止りねじ
リングゲージ
通り点検
プラグ
同左用止り点検
プラグ
摩耗点検
プラグ
GR GRGF GRNF GW NR NRGF NRNF NW
通り側GO side
GR 点検用ゲージ Check plug gauge for GO screw ring gauge ISO導入 JIS ISO GRGF 〃 GRNF 従来 JIS JIS GF
摩耗点検用ゲージ Wear check plug for GO screw ring gauge
GW
止り側NOT GO side
ISO導入JIS NR、従来JIS WR又はIRISO: NR, current JIS: WR or IR
点検用ゲージ Check plug gauge for NOT GO screw ring gauge ISO導入 JIS ISO NRGF 〃 NRNF 従来 JIS JIS WF 〃 IF
摩耗点検用ゲージ Wear check plug for NOT GO screw ring gauge
ISO導入 JIS ISO NW
通り側GO side
止り側NOT GO side
※特殊品となります。 Special order item
593
GAUGES ねじゲージシリーズFEATURES
特
長
GAUGES
ねじゲージシリーズ
GAUGES
ゲージ
■めねじとめねじ用限界ゲージ・点検用ゲージの公差相互の関係位置説明図Mutually related positions of internal screw thread, limit gauge forinternal screw thread and gauge for checking explanation figure.
ISO導入JIS規格めねじ5H、6H、7Hねじ用の例 Example for ISO 5H, 6H, 7H
従来JIS規格めねじ2、3級ねじ用の例 Example for JIS class 2, 3 internal thread
めねじ基準山形basic profi le of internal
screw thread
従来JISめねじ用ゲージJIS
ISO導入JISめねじ用ゲージISOめねじ
の内径Minordiameterof internalthread
内径用ゲージGauge for minor diameter検査用 限界プラグゲージ
内径用プラグゲージ
内径用ゲージGauge for minor diameter
工作用 限界プラグゲージ
止り側NOT GO side
通り側GO side
止り側NOT GO side
通り側GO side
通り側GO side
止り側NOT GO side
IM WM PP
内径の基準寸法の位置(例)
(Position of basic dimension of minor diameter)図の中の許容域又は摩耗しろの図示は、それぞれ次の意味を示す。The illustrations for the tolerance zone of wear margin in the above fi gures show the following:
内径用プラグゲージ Plain plug gauge for minor diameterISO導入JIS PP従来JIS WM又はIM
ISO: PPJIS: WM or IM
従来JISめねじ用ゲージJIS
ISO導入JISめねじ用ゲージISO
有効径用ゲージGauge for pitch diameter
有効径用ゲージGauge for pitch diameter
めねじの有効径Pitchdiameterof internalthread
検査用
止りねじ
プラグゲージ
工作用
止りねじ
プラグゲージ
通りねじプラグ
ゲージ
(工作、検査共用)
通りねじ
プラグゲージ
止りねじ
プラグゲージ
IP WP GP GP NP
有効径の基準寸法の位置(Position of basic dimension of pitch diameter)
通りねじプラグゲージ GO screw plug gauge
GP
止りねじプラグゲージ NOT GO screw plug gauge ISO導入JIS NP
従来JIS WP又はIPISO: NP
JIS: WP or IP
GO side
通り側
NOT GO side
止り側
めねじの内径公差Tolerance on pitch diameter or minor diameter of internal thread
最小摩耗しろMinimum margin for wear
ねじプラグゲージ又はプラグゲージの公差Tolerance on screw plug or plug gauge
ISOゲージ方式は、メートルねじ ISO等級のねじにのみ適用されます。ISO system for gauge applies only to Metric thread ISO class.
This is a standard measurement gauge that also has a correct thread standard angle. One set includes a three-plug and thread ring gauge. These gauges should never be forced, nor should they fit too loosely.
Gauges used for inspecting the JIS Parallel Pipe threads (G・PF) operate on the basis of the GO and NOT GO limit systems. In the 1982 revision of Pipe Thread standards, JIS B0202 (Parallel Pipe Threads) was adjusted to the standard as per contents of ISO 228/1. The thread mark is shown as “G” and the usual JIS thread symbol “PF” is now stipulated in the appendix. When checking new JIS Pipe threads, use the new thread symbol.
595
GAUGES ねじゲージシリーズFEATURES
特
長
GAUGES
ねじゲージシリーズ
GAUGES
ゲージ
■管用平行ねじにおける寸法位置関係図 Related positions of Parallel Pipe threads
新JISの管用ねじをチェックする場合は、新ねじ記号のものをご使用下さい。Where pressure-tight joints are made on the threads, the pipe threads will comply with JIS B 0203.When checking new JIS Pipe threads, use the new thread symbol.
旧 JIS(B0203-1962)old JIS
附属書JIS B0202 Appendix
PFめねじB級以外はISO 228/1によっているIn accordance with the pipe thread specifi ed in ISO 228/1 (except PF internal thread class B)
規格本体JIS B0202 Text
ISO 228/1によっているIn accordance with the pipe thread specifi ed in ISO 228/1
PSめねじPS Internal thread
0
PSおねじPS External thread
PF めねじPF Internal thread
PF おねじPF External thread
GめねじG Internal thread
G おねじG External thread
A 級class A
A 級class A
B 級class B
B 級class B
A 級class A
B 級class B
■相違点 Difference附 属 書
JIS0202 Appendix規 格 本 体JIS0202 Text
ね じ 記 号Screw thread Symbol PF G
呼 び 範 囲Range of thread size PF1/8~ PF12” G1/16~G6”
等 級Classes
おねじ、めねじ共A級、B級があるBoth external & internal thread are divided into classes A & B
おねじはA級、B級があるが、めねじには等級がないOnly the external thread is divided into classes A & B
呼び1/8 ~6”のおねじ(A級、B級)及びめねじ(A級)は規定外事項であるが、その許容差は規格本体で規定するものと変っていない。The tolerances of the external and internal threads of PF1/8 ~6〝differ from the specifications in the Appendix, but they are the same as those specified in the Text.
596
ねじゲージシリーズ GAUGES
FEATURES
特
長
GAUGES
ゲージ
GAUGES
ねじゲージシリーズ
■JIS B0203-1982
規格本体のねじテーパおねじ :Rテーパめねじ :Rc平行めねじ :Rp
附属書のねじテーパおねじ :PTテーパめねじ :PT平行めねじ :PS
Symbol specified in TextExternal taper thread :RInternal taper thread :RcInternal parallel thread :Rp
Symbol specified in AppendixExternal taper thread :PTInternal taper thread :PTInternal parallel thread :PS
■ねじとテーパねじゲージ関係図(R) Relationship of Taper threads and Gauges(R)
●おねじの判定 Inspection of external thread
●めねじの判定 Inspection of internal thread
●おねじとめねじの組み合わせ External and internal thread combined
[ Based on JIS Standards ] When inspecting taper pipe thread (R; Rc・PT) or inspecting taper external thread for fit with taper pipe thread (Rp・PS), a taper thread plug gauge and taper thread ring gauge should form one set. Join the taper pipe thread gauge to the product thread. If the end of taper pipe thread extends past the notch of the gauge, the thread passes inspection.In the 1982 revision of Pipe Thread standards, JIS B0202 (Parallel Pipe Threads) was adjusted to the standard as per contents of ISO 228/1. The thread mark is shown as “G” and the usual JIS thread symbol “PF” is now stipulated in the appendix. When checking new JIS Pipe threads, use the new thread symbol.
American Standards (ANSI) based Taper Pipe Threads (NPT) are checked with thread gauges, and a taper thread plug gauge and taper thread ring gauge form one set. For NPT thread, there are many different gauges, but the prescribed three high notch type is the most common.
■ねじとテーパねじゲージ関係図 Relationship of Taper threads and Gauges
●おねじとめねじの組み合わせ External and Internal thread combined
● L1 リングゲージ L1 Ring gauge
● L1 プラグゲージ L1 Plug gauge
E2E1E1
E1
E2
E0
E0E0
L1
L1
L1
1P 1P
L1: 手締め長さL2: おねじ有効長さ
L2
E2E1E1
E1
E2
E0
E0E0
L1
L1
L1
1P 1P
L1: Hand clamping lengthL2: Effective length of external thread
L2
座ぐりのある場合In case of with a positioning notch.
598
ねじゲージシリーズ GAUGES
FEATURES
特
長
GAUGES
ゲージ
GAUGES
ねじゲージシリーズ
米式管用テーパねじゲージGauges for ANSI taper pipe threads TG (NPTF)
American Standards (ANSI) based Taper Pipe Threads (NPTF-Dryseal) are checked with thread gauges. A taper thread plug gauge and taper thread ring gauge should form one set. L1 gauges, L3 plug gauges and L2 ring gauges are all available.※L1 is standard stocked items. L2&L3 are specials to be made for orders.
Limit gauges are used for measurement tests of holes and shafts. Common types include Plug gauges, Ring gauges and Caliper gauges with the GO and NOT GO sides forming one set. These gauges are used for standardizing maximum and minimum tolerable measurements for holes and shafts.
■限界プラグゲージの形状Shapes and Dimensions of Limit Plug Gauges
■限界リングゲージの形状Shapes and Dimensions of Limit Ring Gauges
These gauges and compatible instruments (such as Cylinder gauges, Micro Indicators, Flow Type Air gauges, and Dial Gauges) are used to establish measurements as well as to inspect measurement standards. They are not used directly with products or components.
マスターリングゲージMaster ring gauges
マスタープラグゲージMaster plug gauges
■マスタープラグゲージの形状Shapes and Dimensions of Master Plug Gauges
■マスターリングゲージの形状Shapes and Dimensions of Master Ring Gauges
テーパロック形Taper lock type
トリロック形Trilock type
テーパロック形Taper lock type
トリロック形 Trilock type
L
L
L
dd
d
K
K
K
E
EE
K
D1 D
※PG-Mは特殊品となります。
※PG-M:Special order item
※リングゲージは特殊品となります。
※Ring gauges:Special order item
600
FEATURES
特
長
GAUGES
ゲージ
SCREW THREAD STANDARDS
ねじ規格表
ねじ規格表 SCREW THREAD STANDARDS
■平行ねじ Parallel (Straight) thread
ねじの種類Type
記号Abbreviation
規格Standard
ねじ山の角度Thread angle
呼び径範囲Size range
ねじの等級Tolerance class
ゲージ規格Standard for
screw thread gauge
メートルねじMetric screw threads M
JIS B 0205JIS B 0209JIS B 0207JIS B 0211
60°
1~355 4H, 5H, 6H, 7H4h, 6h, 6g, 8g JIS B 0251
ミニチュアねじMiniature screw thread S JIS B 0201 0.3 ~ 1.4 3G5, 3G6, 4H5
4H6, 5h3 ─
ユニファイねじ(並目)Unified coarse screw threads UNC JIS B 0206
JIS B 0210 No1~ 4
3B, 2B, 1B3A, 2A, 1A
JIS B 0255ユニファイねじ(細目)Unified fine screw threads UNF JIS B 0208
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.
603
GAUGES STOCK LIS
T
在庫一覧表
GAUGES
ゲージ
GAUGES STOCK LIST ねじゲージ在庫一覧表
メートル(M)ねじ Metric screw threads
ねじ用限界ゲージ(LG)Limit gauges for screw threads
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.
605
GAUGES STOCK LIS
T
在庫一覧表
GAUGES
ゲージ
GAUGES STOCK LIST ねじゲージ在庫一覧表
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO(※) The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No.(※) GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.※ Item with red type is not available in a set.
607
GAUGES STOCK LIS
T
在庫一覧表
GAUGES
ゲージ
GAUGES STOCK LIST ねじゲージ在庫一覧表
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO(※) The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No.(※) GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.※ Item with red type is not available in a set.
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO(※) The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No.(※) GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.※ Item with red type is not available in a set.
609
GAUGES STOCK LIS
T
在庫一覧表
GAUGES
ゲージ
GAUGES STOCK LIST ねじゲージ在庫一覧表
メートル(M)ねじ Metric screw threadsツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.
■メッキ前用 Oversizeメートル(M)ねじ Metric screw threads
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO(※) The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No.(※) GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.※ Item with red type is not available in a set.
613
GAUGES STOCK LIS
T
在庫一覧表
GAUGES
ゲージ
GAUGES STOCK LIST ねじゲージ在庫一覧表
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.
PSめねじの合否判定には管用テーパねじゲージ(TG PT)を用います(JIS B 0253)。ねじ用限界ゲージ(LG)を使用するのはおねじがPSの場合に限られます。At the inspection of PS internal thread, Taper Pipe Thread Gage (TG, PT) to be used (JISB 0253)
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO(※) The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No.(※) GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.※ Item with red type is not available in a set.
615
GAUGES STOCK LIS
T
在庫一覧表
GAUGES
ゲージ
GAUGES STOCK LIST ねじゲージ在庫一覧表
管用平行ねじゲージ(PF) Parallel pipe threads 管用平行ねじゲージ(PF) Parallel pipe threadsツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
P 933270□ GPIP・GPWPPF ⅛ - 28
B 30,400R 933270□ GR・IR・WR B 30,400P 933272□ GPIP・GPWP
PF ¼ - 19B 31,200
R 933272□ GR・IR・WR B 31,200P 933274□ GPIP・GPWP
PF ⅜ - 19B 33,800
R 933274□ GR・IR・WR B 33,800P 933276□ GPIP・GPWP
PF ½ - 14B 40,800
R 933276□ GR・IR・WR B 40,800P 933280□ GPIP・GPWP
PF ¾ - 14B 45,800
R 933280□ GR・IR・WR B 45,800P 933284□ GPIP・GPWP
PF1 - 11B 59,600
R 933284□ GR・IR・WR B 59,600P 933288□ GPIP・GPWP
PF1 ¼- 11B 73,400
R 933288□ GR・IR・WR B 73,400P 933290□ GPIP・GPWP
PF1 ½- 11B 85,400
R 933290□ GR・IR・WR B 85,400
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
P 3571□ GPIP・GPWPPF ⅛ - 28
A 30,600R 3571□ GR・IR・WR A 30,600P 3572□ GPIP・GPWP
PF ¼ - 19A 31,400
R 3572□ GR・IR・WR A 31,400P 3573□ GPIP・GPWP
PF ⅜ - 19A 33,800
R 3573□ GR・IR・WR A 33,800P 3574□ GPIP・GPWP
PF ½ - 14A 40,800
R 3574□ GR・IR・WR A 40,800P 3575□ GPIP・GPWP
PF ⅝ - 14A 43,000
R 3575□ GR・IR・WR A 43,000P 3576□ GPIP・GPWP
PF ¾ - 14A 45,800
R 3576□ GR・IR・WR A 45,800P 3577□ GPIP・GPWP
PF ⅞ - 14A 49,600
R 3577□ GR・IR・WR A 49,600P 3578□ GPIP・GPWP
PF1 - 11A 59,800
R 3578□ GR・IR・WR A 59,800P 3579□ GPIP・GPWP
PF1 ⅛ - 11A 67,800
R 3579□ GR・IR・WR A 67,800P 3580□ GPIP・GPWP
PF1 ¼ - 11A 73,800
R 3580□ GR・IR・WR A 73,800P 3581□ GPIP・GPWP
PF1 ½ - 11A 85,400
R 3581□ GR・IR・WR A 85,400P 3582□ GPIP・GPWP
PF1 ¾ - 11A 102,400
R 3582□ GR・IR・WR A 102,400P 3583□ GPIP・GPWP
PF2 - 11A 117,200
R 3583□ GR・IR・WR A 117,200P 933251□ GP・IP・WP
PF2 ¼ - 11A 70,400
R 933251□ GR・IR・WR A 140,800P 933253□ GP・IP・WP
PF2 ½ - 11A 82,600
R 933253□ GR・IR・WR A 165,200P 933257□ GP・IP・WP
PF3 - 11A 107,000
R 933257□ GR・IR・WR A 214,000P 933259□ GP・IP・WP
PF3 ½ - 11A 127,000
R 933259□ GR・IR・WR A 254,000P 933261□ GP・IP・WP
PF4 - 11A 149,000
R 933261□ GR・IR・WR A 298,000
ねじ用限界ゲージ(LG)Limit gauges for screw threads
LGPFねじ
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO(※) The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No.(※) GPIP…0 GPWP…1 GP…2 IP…3 WP…4 GR…7 IR…8 WR…94.Contact us for availability of either side only.※ Item with red type is not available in a set.
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPNP……0 GP……2 NP……3 GR……7 NR……84.Contact us for availability of either side only.
617
GAUGES STOCK LIS
T
在庫一覧表
GAUGES
ゲージ
GAUGES STOCK LIST ねじゲージ在庫一覧表
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
P 932782□ GPNPM 14 × 2
6H 22,400R 932782□ GR・NR 6g 22,400P 932783□ GPNP
M 14 × 1.56H 22,000
R 932783□ GR・NR 6g 22,000P 932785□ GPNP
M 14 × 16H 23,800
R 932785□ GR・NR 6g 23,800P 932787□ GPNP
M 15 × 1.56H 22,400
R 932787□ GR・NR 6g 22,400P 932788□ GPNP
M 15 × 16H 24,600
R 932788□ GR・NR 6g 24,600P 932794□ GPNP
M 16 × 26H 23,600
R 932794□ GR・NR 6g 23,600P 932795□ GPNP
M 16 × 1.56H 22,800
R 932795□ GR・NR 6g 22,800P 932796□ GPNP
M 16 × 16H 25,400
R 932796□ GR・NR 6g 25,400P 932798□ GPNP
M 17 × 16H 26,400
R 932798□ GR・NR 6g 26,400P 932806□ GPNP
M 18 × 2.56H 25,400
R 932806□ GR・NR 6g 25,400P 932807□ GPNP
M 18 × 26H 25,000
R 932807□ GR・NR 6g 25,000P 932808□ GPNP
M 18 × 1.56H 23,800
R 932808□ GR・NR 6g 23,800P 932809□ GPNP
M 18 × 16H 27,000
R 932809□ GR・NR 6g 27,000P 932820□ GPNP
M 20 × 2.56H 27,600
R 932820□ GR・NR 6g 27,600P 932821□ GPNP
M 20 × 26H 26,000
R 932821□ GR・NR 6g 26,000P 932822□ GPNP
M 20 × 1.56H 25,400
R 932822□ GR・NR 6g 25,400P 932823□ GPNP
M 20 × 16H 29,000
R 932823□ GR・NR 6g 29,000P 932829□ GPNP
M 22 × 2.56H 29,200
R 932829□ GR・NR 6g 29,200P 932830□ GPNP
M 22 × 26H 27,600
R 932830□ GR・NR 6g 27,600P 932831□ GPNP
M 22 × 1.56H 26,400
R 932831□ GR・NR 6g 26,400P 932832□ GPNP
M 22 × 16H 30,600
R 932832□ GR・NR 6g 30,600P 932838□ GPNP
M 24 × 36H 32,400
R 932838□ GR・NR 6g 32,400P 932839□ GPNP
M 24 × 26H 28,400
R 932839□ GR・NR 6g 28,400P 932841□ GPNP
M 24 × 1.56H 27,800
R 932841□ GR・NR 6g 27,800 次ページへ
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPNP……0 GP……2 NP……3 GR……7 NR……84.Contact us for availability of either side only.
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPNP……0 GP……2 NP……3 GR……7 NR……84.Contact us for availability of either side only.
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
P 931938□ GPNPM 24 × 3 - L
6H 38,800R 931938□ GR・NR 6g 38,800P 931941□ GPNP
M 24 × 1.5 - L6H 33,400
R 931941□ GR・NR 6g 33,400P 931952□ GPNP
M 27 × 3 - L6H 41,800
R 931952□ GR・NR 6g 41,800P 931955□ GPNP
M 27 × 1.5 - L6H 36,400
R 931955□ GR・NR 6g 36,400P 931961□ GPNP
M 30 × 3.5 - L6H 45,600
R 931961□ GR・NR 6g 45,600P 931964□ GPNP
M 30 × 1.5 - L6H 38,800
R 931964□ GR・NR 6g 38,800
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
P 931015□ GPNPM 2 × 0.4
5H 28,600R 931015□ GR・NR 4h 28,600P 931028□ GPNP
M 3 × 0.55H 25,000
R 931028□ GR・NR 4h 25,000P 931030□ GPNP
M 3.5 × 0.65H 24,800
R 931030□ GR・NR 4h 24,800P 931035□ GPNP
M 4 × 0.75H 23,800
R 931035□ GR・NR 4h 23,800P 931040□ GPNP
M 5 × 0.85H 23,400
R 931040□ GR・NR 4h 23,400P 931046□ GPNP
M 6 × 15H 23,200
R 931046□ GR・NR 4h 23,200P 931052□ GPNP
M 8 × 1.255H 23,400
R 931052□ GR・NR 4h 23,400P 931053□ GPNP
M 8 × 15H 22,800
R 931053□ GR・NR 4h 22,800P 931060□ GPNP
M 10 × 1.55H 23,800
R 931060□ GR・NR 4h 23,800P 931061□ GPNP
M 10 × 1.255H 22,800
R 931061□ GR・NR 4h 22,800P 931070□ GPNP
M 12 × 1.755H 24,400
R 931070□ GR・NR 4h 24,400P 931071□ GPNP
M 12 × 1.55H 23,800
R 931071□ GR・NR 4h 23,800P 931072□ GPNP
M 12 × 1.255H 24,400
R 931072□ GR・NR 4h 24,400P 931073□ GPNP
M 12 × 15H 26,000
R 931073□ GR・NR 4h 26,000P 931082□ GPNP
M 14 × 25H 25,800
R 931082□ GR・NR 4h 25,800
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPNP……0 GP……2 NP……3 GR……7 NR……84.Contact us for availability of either side only.
1.P: Plug Gauge, R: Ring Gauge2.Plug Gauge unit price: set of GO and NOT GO The price of set of ring gauge (GO and NOT GO) is double the unit price The price of plug gauge per piece is half of the unit price.3.Following numbers represent the last digit of EDP No. GPNP……0 GP……2 NP……3 GR……7 NR……84.Contact us for availability of either side only.
621
GAUGES STOCK LIS
T
在庫一覧表
GAUGES
ゲージ
GAUGES STOCK LIST ねじゲージ在庫一覧表
1.P: Plug Gauge1. P =プラグゲージを表わします。
内径プラグゲージ Limit plug gauge for minor diameter ユニファイ(U)ねじ Unified screw threads
インサートねじ用限界ねじゲージ(HL-LG)Limit gauges for Insert screw threads
メートル(M)ねじ Metric screw threadsツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
P 9333121 GPWP M 2.6 × 0.45 2 25,800P 9333141 GPWP M 3 × 0.5 2 25,600P 9333161 GPWP M 4 × 0.7 2 25,000P 9333181 GPWP M 5 × 0.8 2 24,400P 9333201 GPWP M 6 × 1 2 24,400P 9333221 GPWP M 8 × 1.25 2 25,000P 9333241 GPWP M 10 × 1.5 2 25,600P 9333261 GPWP M 10 × 1.25 2 24,600P 9333281 GPWP M 12 × 1.75 2 26,800P 9333301 GPWP M 12 × 1.5 2 26,400P 9333321 GPWP M 12 × 1.25 2 26,800P 9333341 GPWP M 14 × 2 2 29,200P 9333361 GPWP M 14 × 1.5 2 29,200P 9333381 GPWP M 16 × 2 2 31,000P 9333401 GPWP M 16 × 1.5 2 30,200P 9333421 GPWP M 18 × 2.5 2 34,600P 9333441 GPWP M 18 × 1.5 2 32,600P 9333461 GPWP M 20 × 2.5 2 37,800P 9333481 GPWP M 20 × 1.5 2 34,800
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
P 9329020 IM M 1.4 × 0.3 2 25,000P 9329021 WM M 1.4 × 0.3 2 25,000P 9329035 IM M 1.6 × 0.35 2 25,000P 9329036 WM M 1.6 × 0.35 2 25,000P 9329045 IM M 1.7 × 0.35 2 25,000P 9329046 WM M 1.7 × 0.35 2 25,000P 9329075 IM M 2 × 0.4 2 23,200P 9329076 WM M 2 × 0.4 2 23,200P 9329100 IM M 2.3 × 0.4 2 23,200P 9329101 WM M 2.3 × 0.4 2 23,200P 9329115 IM M 2.5 × 0.45 2 20,400P 9329116 WM M 2.5 × 0.45 2 20,400P 9329125 IM M 2.6 × 0.45 2 20,400P 9329126 WM M 2.6 × 0.45 2 20,400P 9329145 IM M 3 × 0.5 2 20,400P 9329146 WM M 3 × 0.5 2 20,400P 9329175 IM M 4 × 0.7 2 11,820P 9329176 WM M 4 × 0.7 2 11,820P 9329200 IM M 5 × 0.8 2 11,000P 9329201 WM M 5 × 0.8 2 11,000P 9329230 IM M 6 × 1 2 11,000P 9329231 WM M 6 × 1 2 11,000P 9329260 IM M 8 × 1.25 2 10,380P 9329261 WM M 8 × 1.25 2 10,380P 9329265 IM M 8 × 1 2 10,380P 9329266 WM M 8 × 1 2 10,380P 9329300 IM M 10 × 1.5 2 11,000P 9329301 WM M 10 × 1.5 2 11,000P 9329305 IM M 10 × 1.25 2 11,000P 9329306 WM M 10 × 1.25 2 11,000P 9329310 IM M 10 × 1 2 11,000P 9329311 WM M 10 × 1 2 11,000P 9329350 IM M 12 × 1.75 2 12,000P 9329351 WM M 12 × 1.75 2 12,000P 9329355 IM M 12 × 1.5 2 12,000P 9329356 WM M 12 × 1.5 2 12,000P 9329360 IM M 12 × 1.25 2 12,000P 9329361 WM M 12 × 1.25 2 12,000P 9329365 IM M 12 × 1 2 12,000P 9329366 WM M 12 × 1 2 12,000P 9329410 IM M 14 × 2 2 12,000P 9329411 WM M 14 × 2 2 12,000P 9329415 IM M 14 × 1.5 2 12,000P 9329416 WM M 14 × 1.5 2 12,000P 9329470 IM M 16 × 2 2 12,000P 9329471 WM M 16 × 2 2 12,000P 9329475 IM M 16 × 1.5 2 14,220P 9329476 WM M 16 × 1.5 2 14,220
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
P 9329530 IM M 18 × 2.5 2 14,220P 9329531 WM M 18 × 2.5 2 14,220P 9329540 IM M 18 × 1.5 2 14,220P 9329541 WM M 18 × 1.5 2 14,220P 9329600 IM M 20 × 2.5 2 14,220P 9329601 WM M 20 × 2.5 2 14,220P 9329605 IM M 20 × 1.5 2 14,220P 9329606 WM M 20 × 1.5 2 14,220P 9329645 IM M 22 × 2.5 2 16,120P 9329646 WM M 22 × 2.5 2 16,120P 9329655 IM M 22 × 1.5 2 16,120P 9329656 WM M 22 × 1.5 2 16,120P 9329690 IM M 24 × 3 2 16,120P 9329691 WM M 24 × 3 2 16,120P 9329705 IM M 24 × 1.5 2 16,120P 9329706 WM M 24 × 1.5 2 16,120
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
1.P: Plug Gauge, S: set of Plug and Ring gauge2.Plug Gauge unit price: set of GO and NOT GO3.Following numbers represent the last digit of EDP No. Set of Plug and Ring gauge……0 Plug Gauge……1 Ring Gauge……2
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
P 9338104 GW M 1.4 × 0.3 2 25,000P 9338107 GW M 1.6 × 0.35 2 23,800P 9338109 GW M 1.7 × 0.35 2 22,200P 9338115 GW M 2 × 0.4 2 18,620P 9338120 GW M 2.3 × 0.4 2 18,440P 9338123 GW M 2.5 × 0.45 2 16,640P 9338125 GW M 2.6 × 0.45 2 17,280P 9338129 GW M 3 × 0.5 2 16,360P 9338135 GW M 4 × 0.7 2 15,480P 9338140 GW M 5 × 0.8 2 15,220P 9338146 GW M 6 × 1.0 2 14,980P 9338152 GW M 8 × 1.25 2 15,220P 9338153 GW M 8 × 1.0 2 14,860P 9338160 GW M 10 × 1.5 2 15,480P 9338161 GW M 10 × 1.25 2 14,860P 9338170 GW M 12 × 1.75 2 15,800P 9338171 GW M 12 × 1.5 2 15,480P 9338172 GW M 12 × 1.25 2 15,860P 9338182 GW M 14 × 2.0 2 16,760P 9338183 GW M 14 × 1.5 2 16,500P 9338194 GW M 16 × 2.0 2 17,600P 9338195 GW M 16 × 1.5 2 17,100P 9338206 GW M 18 × 2.5 2 18,960P 9338208 GW M 18 × 1.5 2 17,780P 9338220 GW M 20 × 2.5 2 20,400P 9338222 GW M 20 × 1.5 2 18,960P 9338229 GW M 22 × 2.5 2 22,000P 9338231 GW M 22 × 1.5 2 19,800P 9338238 GW M 24 × 3.0 2 24,200P 9338241 GW M 24 × 1.5 2 20,800P 9338252 GW M 27 × 3.0 2 26,000P 9338255 GW M 27 × 1.5 2 22,800P 9338261 GW M 30 × 3.5 2 28,400P 9338264 GW M 30 × 1.5 2 24,200
限界プレーンゲージ(PG)Plain limit gauges
1. P =プラグゲージ、R=リングゲージを表わします。2. PG はセット、LCG(GW)は単体の価格です。
1.P: Plug Gauge, R: Ring Gauge2.PG unit price: set of GO and NOT GO LCG(GW) unit price: per piece
摩耗点検ねじプラグゲージ(LCG)Wear check plug for Go screw ring gauges
625
GAUGES STOCK LIS
T
在庫一覧表
GAUGES
ゲージ
GAUGES STOCK LIST ねじゲージ在庫一覧表
メートル(M)ねじ Metric screw threads メートル(M)ねじ Metric screw threadsツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
P 9340362 GP M 3 × 0.5 2 21,800R 9340367 GR M 3 × 0.5 2 54,600P 9340422 GP M 4 × 0.7 2 20,600R 9340427 GR M 4 × 0.7 2 51,800P 9340472 GP M 5 × 0.8 2 20,400R 9340477 GR M 5 × 0.8 2 50,800P 9340542 GP M 6 × 1 2 19,980R 9340547 GR M 6 × 1 2 50,000P 9340612 GP M 8 × 1.25 2 20,400R 9340617 GR M 8 × 1.25 2 50,800P 9340622 GP M 8 × 1 2 19,800R 9340627 GR M 8 × 1 2 49,600P 9340702 GP M 10 × 1.5 2 20,600R 9340707 GR M 10 × 1.5 2 51,800P 9340712 GP M 10 × 1.25 2 19,800R 9340717 GR M 10 × 1.25 2 49,600P 9340802 GP M 12 × 1.75 2 21,200R 9340807 GR M 12 × 1.75 2 53,000P 9340812 GP M 12 × 1.5 2 20,800R 9340817 GR M 12 × 1.5 2 52,200P 9340822 GP M 12 × 1.25 2 21,200R 9340827 GR M 12 × 1.25 2 53,000
ツールNo. 記号 呼び 精度 標準価格EDP NO. Symbol Thread Size Class (Yen)
P 9341132 GP M 1.4 × 0.3 2 58,600P 9341152 GP M 1.6 × 0.35 2 55,400P 9341172 GP M 1.7 × 0.35 2 52,000P 9341202 GP M 1.8 × 0.35 2 48,400P 9341222 GP M 2 × 4 2 43,600P 9341312 GP M 2.5 × 0.45 2 39,000P 9341332 GP M 2.6 × 0.45 2 40,400P 9341362 GP M 3 × 0.5 2 38,200P 9341422 GP M 4 × 0.7 2 36,000P 9341472 GP M 5 × 0.8 2 35,600P 9341542 GP M 6 × 1 2 35,000P 9341612 GP M 8 × 1.25 2 35,600P 9341622 GP M 8 × 1 2 34,800P 9341702 GP M 10 × 1.5 2 36,000P 9341712 GP M 10 × 1.25 2 34,800P 9341802 GP M 12 × 1.75 2 37,000P 9341812 GP M 12 × 1.5 2 36,600P 9341822 GP M 12 × 1.25 2 37,000
超硬ねじ用限界ゲージCarbide limit gauges for screw threads
XPM 粉末ハイスねじ用限界ゲージPowder HSS(XPM) limit gauges for screw threads
LG Mねじ2級 XPM(超硬)
1.P: Plug Gauge, R: Ring Gauge1. P =プラグゲージ、R=リングゲージを表わします。