F O R U M “Challenges and perspectives of the Aerospace ... · Maquilas Teta Kawi (an Offshore Group Company ) and The National Center of Metrology of México (CENAM) invite you

The Ministry of Economy of the Government of Sonora, México, The University of Sonora (UNISON), Maquilas Teta Kawi (an Offshore Group Company www.offshoregroup.com) and The National Center of Metrology of México (CENAM) invite you to the:

F O R U M

“Challenges and perspectives of the Aerospace Industry” Actions required in Standardization, Metrology, Accreditation and Certification

of the interest for the General Manufacturing Industry

Who should you attend? Activities:

CEO´s, executives, managers, researchers and technical personnel involved in the entire value chain of the manufacturing industry.

Lectures given by experts in the field and related areas will give way to discussions about needs, challenges and real opportunities for organizations and interest groups that want to increase their competitiveness and improve their design, development, manufacturing and testing processes.

Objectives:

� Meet and discuss the major challenges in the Aerospace Industry and in the General Manufacturing Industry in the Northwest of México for the next five years.

� Identify the components of standardization, metrology, accreditation and certification required by enterprises and organizations in order to address these challenges

� Propose alternatives for action and support that can take the companies and organizations

Benefits:

� Identification of specific cooperation projects and lines of action for the transfer of knowledge and development of emerging technology

� Strategies to enhance the growth of this industry in the fields of standardization, metrology, accreditation, certification and technological development

� Explore areas of opportunity to access to funding support for technology development projects

Venue:

Date Place Room Co-organizers

September 22 - 23 México: Guaymas, Sonora

Parque Industrial Roca Fuerte, Manufacturing Technology Training Center

Ministry of Economy of Sonora, UNISON, Maquilas Teta Kawi, CENAM

F R E E O F C H A R G E

PLEASE SHARE THIS INFORMATION WITH THE PEOPLE THAT YOU CONSIDER INTERESTED

P r o g r a m

D A Y 1 Timetable Topics Participants

14h00 – 15h00 Registration

15h00 – 15h15 Welcome Luis Felipe Seldner,

CEO and President of The Offshore Group

15h15 – 15h30 Words of the authorities Heriberto Grijalva

Rector

University of Sonora

Enrique Villa Rivera

General Director

National Council on Science and Technology

Héctor Nava Jaimes

General Director

National Center of Metrology - México

15h30 – 15h55

Inauguration and conference:

Current national situation and challenges in the State of Sonora

Moisés Gómez Reyna

Secretary

Ministry of Economy of Sonora

http://www.1economiasonora.gob.mx

16h00 – 16h25

Science and Technology National Program Enrique Villa Rivera

General Director

National Council on Science and Technology, CONACYT

www.conacyt.gob.mx

16h30 – 16h55

National Flight Plan Manuel Sandoval Ríos

Executive Director of Prospective Analysis and Innovation Business Intelligence Unit

PROMEXICO

www.promexico.gob.mx

16h55 – 17h10 Coffe break

17h10 – 17h35

Current National situation of the Aerospace Industry in México

Flavio Díaz Mirón

President

Mexican Federation of Aerospace Industry, FEMIA

www.femia.com.mx

17h35 – 18h00

Human Capital development in the Aerospace Industry Miguel Álvarez Montalvo

President Mexican Council of Aerospace Education, COMEA

18h00 – 18h40

Improvement opportunities in Technological Development and production management

Allen C. Haggerty

Vice President/General Manager Engineering Military Aircraft and Missile Systems Group, The Boeing Company (retired) MIT Affiliate, Lean Advancement Initiative

www.mit.edu

18h45 – 20h00 Closing All

D A Y 2

Timetable Topics Participants 08h30 - 09h00 Registration

09h00 – 09h15 Introduction to the forum activities J. Salvador Echeverría Villagómez

Physics Metrology Director National Center of Metrology, CENAM

www.cenam.mx

09h15 -10h15

Block 1:

Challenges and

perspectives in México

northwest region

09h15 - 09h35 1.1 Challenges, opportunities and perspectives in the industrial

sector

Hiram Martínez Plant Manager - Guaymas

Goodrich Turbomachinery Products http://www.goodrich.com/Goodrich

09h35 – 09h55 1.2 Challenges, opportunities and perspectives in the industrial

sector

Jaime Castro Batista Plant Manager Medtronic www.medtronic.com.mx

09h55 – 10h15 1.3 Challenges, opportunities and perspectives in the industrial

sector

Paul Cappelli Director Global Development Ducommun Inc. Monrovia, California

http://www.ducommun.com/

10h15 - 10h30 Coffe break

10h30 a 12h00

Block 2: Technology

Offer

10h30 – 11h00 Specific approaches in technology: 2.1 Geometric and Dimensional Tolerances

René Pichardo Vega

CENAM

11h00 – 11h30 2.2 Aerolabs for technical services and technology (LabTA) and projects of the Seventh framework program

Guillermo Rodríguez Vilomara National contact point for the Aerospace Industry

Centro de Ingeniería y Desarrollo Industrial www.cidesi.mx

11h30 – 12h00 2.3 Certification and accreditation

Gustavo Hernández Curiel Certificated Auditor ACLASS http://www.aclasscorp.com/

12h00-12h15 Coffe break

12h15 -13h45

Block 3:

Educational offerings -

demands and the

government

support

12h15 – 12h35

3.1 Degree program in Metrology

Enrique F. Velázquez Contreras

General Academic Secretary - UNISON

12h35 – 13h00

3.2 Key elements for developing and presenting proposals to CONACYT and the Ministry of Economy

Francisco Javier Cevallos Rojas

CONACYT Sonora José Alfredo Gámez Corrales

Ministry of Economy - Sonora

13h00 – 13h25

3.3 Educational model in the Aeronautical University in Querétaro and opportunity areas for link-up

Jorge Gutiérrez de Velasco

Rector

Aeronautical University in Querétaro

13h30 - 15h00 Lunch

15h00 - 16h30

Block 4:

Conclusion panel

15h00 – 15h15

4.1 Presentation of surveys analysis in the industry

Martín Chávez Morales Miguel Angel López Arriquivez Engineering Industrial Departament UNISON

15h15 – 16h30

4.2 Panel presentation and discussion of proposal and action plans based on survey results

UNISON – Ministry of Economy, CONACYT- CENAM – MTK - Guests

16h30 - 16h45 Coffe break

16h45 – 17h00 Comments and agreements All

17h00 - 17h10 Closing Armando Lee Quiroga

General Director

Maquilas Teta Kawi

F u r t h e r i n f o r m a t i o n

CENTROS DE ASISTENCIA METROLÓGICA – RED MESURA INTERINSTITUCIONAL

CENTRO NACIONAL DE METROLOGIA

Irma Rosa López Navarro Universidad de Sonora (UNISON) Hermosillo, Sonora. MÉXICO http://www.industrial.uson.mx Tel. +52 (662) 2592159, 2592160 [email protected]

J. Gabriel Lugo Luévano Centro Nacional de Metrología Querétaro. MEXICO http://www.cenam.mx Tel. +52 (442) 211 0522 [email protected]

“Please confirm your participation”