Low Pressure Screen Extrusion on the Bench Top Designed for flexibility in R&D and ease of scale-up to cost-effective production. Designed for product development on the bench-top with different extrusion hole sizes available, reduced height screens available for smaller batches. Adaptable to work with small batch sizes from a few tens of grams up to batch sizes of several kilos. Upgrades and additional options available as needed. Automatic data collection of operation parameters including product temperature is available. Interchangeable extrusion screens between laboratory and production models minimise issues with scale up from laboratory to production. The extruded product falls directly into the collection vessel avoiding the need for additional work on the product before transfer for the next processing step. Easily disassembled for cleaning and maintenance. Fully safety interlocked for your protection. Batches from a few grams to several kilos. Call +44 (0) 1258 52 00 34or visit www.caleva.co.uktoday!Caleva Process Solutions Butts Pond Industrial Estate, Sturminster Newton, Dorset, DT10 1AZ Tel: +44 (0) 1258 52 00 34 Fax: +44 (0) 1258 47 11 33 Email: [email protected]www.caleva.com
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
7/28/2019 Extruder 20
http://slidepdf.com/reader/full/extruder-20 1/2
Low Pressure ScreenExtrusion on the Bench TopDesigned for flexibility in R&D and ease
of scale-up to cost-effective production.Designed for product development on the bench-top
with different extrusion hole sizes available, reduced
height screens available for smaller batches.
Adaptable to work with small batch sizes from a few tens
of grams up to batch sizes of several kilos. Upgrades and
additional options available as needed.
Automatic data collection of operation parameters
including product temperature is available.
Interchangeable extrusion screens between laboratory
and production models minimise issues with scale up
from laboratory to production.
The extruded product falls directly into the collection
vessel avoiding the need for additional work on the
product before transfer for the next processing step.
Easily disassembled for cleaning and maintenance. Fully
safety interlocked for your protection.
Batches from a few grams to several kilos.Call +44 (0) 1258 52 00 34 or visit