-
2107 GI/2016 (1)
jftLVªh laö Mhö ,yö&33004@99 REGD. NO. D. L.-33004/99
vlk/kj.k EXTRAORDINARY
Hkkx II—[k.M 3—mi&[k.M (ii) PART II—Section 3—Sub-section
(ii)
izkf/dkj ls izdkf'kr PUBLISHED BY AUTHORITY
la- 1035] ubZ fnYyh] 'kfuokj] vizSy 30] 2016@oS'kk[k 10] 1938
No. 1035] NEW DELHI, SATURDAY, APRIL 30, 2016/VAISAKHA 10, 1938
परमाणु ऊजा िवभाग
परमाणु ऊजा िवभागपरमाणु ऊजा िवभाग
परमाणु ऊजा िवभाग
अिधसूचना
अिधसूचनाअिधसूचना
अिधसूचना
मुंबई, 28 अ�ैल, 2016
िवषय
िवषयिवषय
िवषय:
::
:
परमाणु ऊजा अिधिनयम 1962 के अंतगत िविहत पदाथ�
परमाणु ऊजा अिधिनयम 1962 के अंतगत िविहत पदाथ�परमाणु ऊजा अिधिनयम
1962 के अंतगत िविहत पदाथ�
परमाणु ऊजा अिधिनयम 1962 के अंतगत िविहत पदाथ�,
, ,
, िविहत उपकरण और "ौ$ोिगक& क& सचूी का
िविहत उपकरण और "ौ$ोिगक& क& सचूी का िविहत उपकरण और
"ौ$ोिगक& क& सचूी का
िविहत उपकरण और "ौ$ोिगक& क& सचूी का
अ$तनीकरण
अ$तनीकरणअ$तनीकरण
अ$तनीकरण
का.आ.
का.आ.का.आ.
का.आ.
1592
15921592
1592(
((
(अ
अअ
अ).
).).
).—
——
— परमाणु
ऊजा� अिधिनयम, 1962 क� धारा 2 क� उपधारा (1) के खंड (च) और (छ)
तथा
धारा 3 के अनुसरण म" और परमाण ुऊजा� िवभाग म" भारत सरकार के (दनांक
20 जनवरी 2006 के का.आ. सं.61 (ई) के
अिध/मण म", क" 0 सरकार “िविहत पदाथ3, िविहत उप4 कर एवं �ौ7ोिगक�”
के 9प म" इसके उपाब< अनुसूची म" िविन?द@
पदाथ3, उप4कर एवं �ौ7ोिगक� को इसके Aारा अिधसिूचत करती ह।ै
अनुसचूी
अनुसचूीअनुसचूी
अनुसचूी
+ेणी
+ेणी +ेणी
+ेणी 0
00
0
नािभक&य सामि,याँ
नािभक&य सामि,याँनािभक&य सामि,याँ
नािभक&य सामि,याँ,
, ,
, नािभक&य स ेसबंंिधत अ/य सामि,याँ
नािभक&य स ेसबंंिधत अ/य सामि,याँनािभक&य स ेसबंंिधत अ/य
सामि,याँ
नािभक&य स ेसबंंिधत अ/य सामि,याँ,
, ,
, उप0कर एवं "ौ$ोिगक&
उप0कर एवं "ौ$ोिगक& उप0कर एवं "ौ$ोिगक&
उप0कर एवं "ौ$ोिगक&
0A
0A0A
0A
िविहत पदाथ
िविहत पदाथ िविहत पदाथ
िविहत पदाथ
�ट�पणी : Cेणी 0A क� (कसी भी रेिडयोस(/य सामDी पर इन िनयमE के
अितFरG परमाण ु ऊजा�
अिधिनयम 1962 के तहत बने परमाण ु ऊजा� (िव(करण संरHण) अिधिनयम 2004
के �ावधान और
परमाणु ऊजा� अिधिनयम 1962 क� धारा-16 के �ावधान भी लागू हEगे ।
0A1
0A10A1
0A1
2ोत साम,ी
2ोत साम,ी 2ोत साम,ी
2ोत साम,ी
-
2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
0A101
0A1010A101
0A101
�कृित म" पाये जाने वाले आइसोटोपE के िमCण युG यूरेिनयम ।
0A102
0A1020A102
0A102
आइसोटोप 235 म" अवHियत यूरेिनयम ।
0A103
0A1030A103
0A103
थोFरयम
0A104
0A1040A104
0A104
उपरोG
0A 101,102 या 0A 103 म" (कसी भी सामDी, धातु, िमCातु, रासायिनक
यौिगक अथवा
सा0ंण अथवा (कसी पदाथ� के 9प म" िविहत उपरोG सामDी ।
0A105
0A1050A105
0A105
उपरोG म" से कोई एक अथवा एकािधक मदE से युG कोई अKय सामDी ।
नोट 1 : Cोत सामिDयE म" यूरेिनयम, थोFरयम अय4क या सां0ण शािमल
हM।
नोट 2 : िनNिलिखत मदE क�, केवल गैर-नािभक�य गितिविधयE हतुे, एक
कैल"डर वष� के अंतग�त नीचे िविन?द@ सीमाP से अनिधक माQा का,
(कसी एक �ाRकता� देश को िनया�त पर िनयंQण नहS ह।ै
क) यूरेिनयम (�ाकृितक आइसोटोपE के िमCण युG) 100 (कलोDाम
ख) अवHियत यूरेिनयम (�कृित म" पाये जाने वाले यूरेिनयम
से कम 4तर के 235 आइसोटोप म" अवHियत यूरेिनयम) 1000 (कलोDाम
ग) थोFरयम 1000 (कलोDाम
FटTपणी 3: 0A1 िनNिलिखत को िनयंिQत नहS करता ह ै:-
i) यूरेिनयम और थोFरयम अय4क, खिनज सां0ण या अKय सामिDयाँ जो 300
भाग �ित दस लाख
(ppm) से कम यूरेिनयम या/ और थोFरयम युG हM।
ii) अलॉय (िमCातु) जो 5% स ेकम थोFरयमयुG हM ।
iii) थोFरयमयुG उXपाद, जो गैर-नािभक�य उपयोग हतुे िविनYमत (कये गये
हM।
0A2
0A20A2
0A2
िवशेष िवखंडनीय साम,ी
िवशेष िवखंडनीय साम,ीिवशेष िवखंडनीय साम,ी
िवशेष िवखंडनीय साम,ी
0A201
0A2010A201
0A201
7लूटोिनयम
7लूटोिनयम7लूटोिनयम
7लूटोिनयम - 239
0A202
0A2020A202
0A202
यूरेिनयम
यूरेिनयमयूरेिनयम
यूरेिनयम - 233
0A203
0A2030A203
0A203
आइसोटोप
आइसोटोपआइसोटोप
आइसोटोप 235 अथवा 233 म" संवY
-
¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 3
िनधा�Fरत क� गयी हो।
तकनीक� FटTपणी :
“ आइसोटोप 235 या 233 म" संवYधत यूरेिनयम” श[दपद का अथ�
आइसोटोप 235 या 233 या दोनE के इतनी अिधक माQा म" होने से ह ै
(क
उन आइसोटोपE क� �चुरता का योग का आइसोटोप 238 से अनुपात �कृित
म"
सिृजत आइसोटोप 238 से आइसोटोप 235 के समानुपात से अिधक हो।
FटTपणी :
1. "िवशेष िवखंडनीय सामDी" श[दपद क� ^ा_या म" `ोत सामDी शािमल नहS
ह।ै
2. "िवशेष िवखंडनीय सामDी" क� कोई भी माQा िविहत पदाथ� ह।ै
3. 0A2 िनNिलिखत को िनयंिQत नहS करता ह ै-
क. Tलूटोिनम-238 के आइसोटोिपक सां0ण के 80% स ेअिधक वाला
Tलूटोिनयम
ख. िवशेष िवखंडनीय सामDी,जब इKह" Dाम माQाP या कम म", उपकरणE के
संवेदी घटकE म"
लगाया जाता ह।ै
0A3
0A30A3
0A3
अ/य साम,ी
अ/य साम,ीअ/य साम,ी
अ/य साम,ी
"अKय सामDी" से ताXपय� ह ै- FरएbटरE हतुे गैर-नािभक�य सामDी,
नािभक�य संबंधी दोहरे उपयोग वाली
िनNां(कत सामDी, एवं समय-समय पर केK0 सरकार Aारा िनधा�Fरत क� जाने
वाली सामिDयां ।
0A301
0A3010A301
0A301
cूटेFरयम और
भारी पानी
cूटेFरयम, भारी पानी (cूटेFरयम आbसाइड) और कोई अKय ऐसा cूटेFरयम
यौिगक िजसम" cूटेFरयम
और हाइdोजन परमाणुP का अनुपात 1:5000 से अिधक हो
क)
))
) नािभक�य Fरएbटर म" इ4तेमाल करने हतुे एक परेषण म" 5 (कलोDाम से
अिधक cुटीFरयम परमाणुP
क� माQा या एक कैल"डर वष� म" , (कसी एक �ाRकता� दशे हतुे 25
(कलोDाम cुटीFरयम परमाणु से
अिधक हो।
ख)
))
) एक कैल"डर वष� म" (कसी एक �ाRकता� देश हतुे गैर-नािभक�य गितिविध
म" 200 (कलोDाम cुटीFरयम
परमाणुP क� स_ंया से अिधक हो।
0A302
0A3020A302
0A302
नािभक�य Dेड Dेफाइट
5 भाग �ित िमलयन (पीपीएम) बोरोन के समतुfय के शु
-
4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
FटTपणी : मद 0A302 के अंतग�त Dेफाइट पाउडर नहS आता ह।ै
0A303
0A3030A303
0A303
िजकiिनयम, िजसम" हाफिनयम क� माQा धातु, िमCातु के 9प म" िजकiिनयम
के 500 भाग म" एक भाग से
कम वजन/भार (अथा�त 2000 पीपीएम से कम) से होता ह ै। इनम" से (कसी
के भी िमCधातु, यौिगक, उसके
िविनमा�ण, अपिश@ अथवा पूवiG के अपिश@ हM।
0A304
0A3040A304
0A304
बेFरिलयम धातु, उसके यौिगक, िमCधातु िजनम" भार के 50% से अिधक
बेFरिलयम हो,उसके
िविनमा�ण,पूवiG के कोई अपिश@ या 4/ैप,एवं बेFरल सिहत उसके
खिनज/सां0, ले(कन इसम" िनNिलिखत
शािमल नहS हEगे :-
क) एbस-रे मशीनE या बोर-होल लॉjगग के िलए �योग (कए जाने वाले
बेFरिलयम jवडोज एवं
ख) मरकत/पkा (emeralds), बे9ज (aquamarine) या जेवरE म" उपयोग हतुे
“कट एंड पॉिलlड “
अध�-क�मती पXथरE के 9प म" बFेरल।
0A305
0A3050A305
0A305
संवYधत लीिथयम, िजसम" �ाकृितक आइसोटोपीय �चुरता से (अथा�त 7.5% से
अिधक) अिधक �चुरता
वाला (
6
Li) आइसोटोप लीिथयम-6 होता ह ैऔर संवYधत लीिथयम युG उXपाद अथवा
युिGयाँ जैस(ेक
तािXवक लीिथयम, िमCधातु, यौिगक, लीिथयम युG िमCण, उसके िविनमा�ण या
उपरोG का कोई
अपिश@ अथवा 4/ैप।
0A306
0A3060A306
0A306
िनयोिबयम एवं टैKटेलम, इनक� धातुएं, िमCधातुएं और खिनज िजनम"
कोलmबाइट एवं टMटालाइट शािमल
हM।
0A307
0A3070A307
0A307
आरिHत
0A308
0A3080A308
0A308
hीिशयम, hीिशयम यौिगक अथवा hीिशयम के ऐस े िमCण िजनम" हाइdोजन के
मुकाबले hीिशयम के
परमाणुP का अनपुात 1000 म" 1 भाग से अिधक होता ह,ै हालाँ(क इनम"
आगnिनक लेबेल यौिगकE, गैस
पूFरत `ोतE और रेिडयोhेसर अoययनE के िलए hीिशयम युG जल के 9प म"
उपयोग होने वाली माQा और
उpेlय जैसी बात" शािमल नहS हM ।
0A309
0A3090A309
0A309
हाफिनयम :
हाफिनयम धातु, वजन के अनुसार 60% से अिधक हाफिनयम माQा वाली
िमCधातुएं, वजन के अनुसार
60% से अिधक हाफिनयम वाले हाफिनयम यौिगक, उसस ेिविनYमत होने वाली
चीज" और पूवiG म" से
(कसी के अपिश@ एवं 4/ैप ।
0A310
0A3100A310
0A310
रेिडयम-226:
रेिडयम-226 (226Ra), रेिडयम-226 क� िमCधातुएँ, रेिडयम-226 के
यौिगक, रेिडयम-226 युG िमCण,
उसके िविनमा�ण और उपरोG म" से (कसी के उXपाद अथवा युिGयाँ, िसवाय
िच(कXसा के �योग म" आने
वाली चीजE और (कसी भी 9प म" Ra-226 क� 0.37 GBq (10 mCi) से कम
माQा वाले उXपाद अथवा
उपकरण के ।
-
¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 5
0A311
0A3110A311
0A311
बोरोन
बोरोन-10 (10B) म" संवYधत ऐसा िनNा(ंकत बोरोन िजसम" �ाकृितक से
अिधक आइसोटोपीय �चुरता
हो :-
तािXवक बोरोन, यौिगक, बोरोन युG िमCण, उसके िविनमा�ण, पूवiG म" से
(कसी के अपिश@ अथवा 4/ैप।
0A312
0A3120A312
0A312
हीिलयम-3
हीिलयम-3 (
3
He), हीिलयम-3 युG िमCण और पूवiG म" से (कसी भी पदाथ� स े युG
उXपाद अथवा
युिGयाँ
�ट�पणी: हीिलयम-3 के 1 gm से कम मा�ा वाले उ�पाद अथवा युि�या ँइसम�
शािमल नह ह।ै
0A313
0A3130A313
0A313
रेिडयोKयूिbलयाइqस जो िनNिलिखत 4व9पE म", अfफा-एन �ित(/या पर
आधाFरत Kयूhॉन Cोत िनYमत
करने हतुे उपयुG हो:
क) तािXवक
ख) 37 GBq �ित (कलो अथवा अिधक क� कुल गितिविध वाले यौिगक ।
ग) 37 GBq �ित (कलो अथवा अिधक क� कुल गितिविध वाले िमCण ।
घ) उपरोG म" से (कसी भी पदाथ� से युG उXपाद अथवा युिGयाँ ।
इस मद लाइड म? िन@िलिखत शािमल हA
इस मद लाइड म? िन@िलिखत शािमल हAइस मद लाइड म? िन@िलिखत शािमल
हA
इस मद लाइड म? िन@िलिखत शािमल हA।
।।
।
एिbटिनयम-225 एिbटिनयम-227 कैिलफोYनयम-253
bयूFरयम- 240 bयूFरयम-241 bयूFरयम-242
bयूFरयम-243 bयूFरयम-244 आइK4टीिनयम-253
आइK4टीिनयम-254 गेडोलीिनयम-148 Tलूटोिनयम-236
Tलूटोिनयम-238 पोलोिनयम-209 पोलोिनयम-210
पोलोिनयम-208 रेिडयम-223 थोFरयम-228
थोFरयम-227 यूरेिनयम-230 यूरेिनयम-232
0B
0B0B
0B
िविहत उप0कर
िविहत उप0करिविहत उप0कर
िविहत उप0कर
0B001
0B0010B001
0B001
नािभक&य
नािभक&यनािभक&य
नािभक&य Fरएbटर; ऐसे FरएbटरE के िलए िवशेष 9प से िडजाइन या
तैयार (कए गए अथवा अपनाए
अथवा उपयोग (कए गए अथवा उपयोग हतुे अिभ�ेत संबंिधत उपकरण, घटक और
�णािलया ं िजनका
िववरण िनNवत ह ै:
क. संपूण� नािभक�य Fरएbटर
ख. नािभक�य Fरएbटर पाQ
ग. नािभक�य Fरएbटर rधन भरण एवं िवसज�न तंQ
घ. नािभक�य ऊजा� िनयंQण छड़" एवं उप4कर
-
6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
ङ नािभक�य Fरएbटर दाब निलकाएँ (�ेशर uू[स)
च. नािभक�य rधन bलैjडग: नािभक�य rधन bलैjडग म" उपयोग हतेु िजकiिनयम
uूब या
िजकiिनयम िमCातु uूब( या uूबE क� एसेmबली) िजसम" िजकiिनयम के
मकुाबले हाफिनयम
क� माQा 500 म" से 1 भाग अथवा इससे कम ह ै
छ. �ाथिमक कूलेKट पंप या सकु� लेटर
ज. नािभक�य Fरएbटर इंटन�fस
झ. नािभक�य Fरएbटर के �ाथिमक या माoयिमक कूल"ट स?कट म" उपयोग हेतु
ताप िविनमायक (वाvप
जिनQ)
ञ. Kयूhॉन ससूंचक
ट. बाहरी तापीय शीfड
0B002
0B0020B002
0B002
िविहत सामDी (जैसे(क यूरेिनयम, Tलूटोिनयम, थोFरयम, cूटेFरयम, भारी
पानी, hीिशयम, लीिथयम) के
संसाधन, उXपादन, सां0ण, पFरवत�न अथवा पुन:�ािR के िलए संयंQ;
संब< उप4कर, घटक और इसके िलए
तैयार क� गई, अपनाई जाने वाली या उपयोग होने वाली अथवा उपयोग हतुे
अिभ�ेत िडजाइन �णािलयाँ
िजनम" िनNिलिखत संयंQ शािमल हM xकतु इन तक ही सीिमत नहS ह;ै
क. cूटेFरयम, भारी पानी या cूटेFरयम यौिगकE के उXपादन अथवा सां0ण
हते ुसंयंQ –
1. पानी – 1.5m या उससे अिधक के ^ास के हाइdोजन सfफाइड िविनमय टावर
तथा 2Mpa
(300 psi) के बराबर या अिधक दाब पर �चालन म" सHम, भारी पानी उXपादन
के िलए िवशेष
9प से िडजाइन (कया yआ तथा िनYमत
2. हाइdोजन-सfफाइड गैस के पFरचालन हतुे िवशेष 9प से िडजाइन (कया yआ
या िनYमत
[लोअर तथा कं�ेसर। 1.8MPa (260psi) चूषण से अिधक या बराबर दाब पर
�चालन के
समय इन [लोअरE या कm�ेसरE म" zूपुट Hमता 56m
3
/सकेे{ड (120,000 SCFM) से अिधक
या बराबर होती ह,ै और इनक� सील गीले H
2
S सेवा हतुे िडजाइिनत होती हM।
3. 1.5 मी. स े 2.5 मी के ^ास और 35 मी. अथवा उससे |यादा ऊंचाई
वाले अमोिनया -
हाइdोजन िविनमय टावर, 15एमपीए या उससे अिधक दाब पर �चालन म" सHम,
भारी पानी
उXपादन के िलए िवशेष 9प से िडजायन (कया गया या िनYमत
4. टावर इंटन�ल तथा 4टेज पंप : भारी पानी के उXपादन के िलए िवशेष
9प से िडजायन (कया
गया िनYमत टावर इंटन�ल तथा 4टेज पंप। टावर इंटन�ल म" िवशेष 9प से
िडजायन (कया गया
4टेज कांटैbटर शािमल हM जो इंटीमेट गैस/िल(}ड कांटैbट को �ोXसािहत
करते हM। 4टेज पmपE म"
कांटैjbटग 4टेज इंटन�ल के अंदर से 4टेज टावरE म" तरल अमोिनया के
पFरचालन के िलए िवशेष
9प से िडजायन (कए गए सबमYसबल पmप शािमल हM
5. 3 एमपीए अथवा उससे अिधक के आपरे~टग �ेशर वाले अमोिनया /ैकर जो
भारी पानी
उXपादन के िलए िवशेष 9प से िडजायन (कया गया या िनYमत
6. 'आन लाइन' हाइdोजन/cूटेFरयम अनुपात िवेषण क� Hमता वाले अवरG
अवशोषण
िवेषक
7. संवYधत cूटेFरयम गैस के भारी पानी म" पFरवत�न हतुे उX�ेरक
बन�र
8. संपूण� भारी पानी उkयन �णािलयाँ अथवा इसके हतुे कॉलम
9. अमोिनया-हाइdोजन िविनमय �/म का �योग करके भारी पानी के उXपादन
के िलए
अमोिनया सेंषण कनवट�र या संेषण इकाईयाँ
-
¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 7
ख) यूरेिनयम के 9पांतरण हतुे संयंQ
1. यूरेिनयम अय4क सां0णE का UO3
म" 9पांतरण हतुे �णािलयाँ
2. UO3
स ेUF
6
म" 9पांतरण हतुे �णािलयाँ
3. UO3
स ेUO
2
म" 9पातंरण हतुे �णािलयाँ
4. UO2
स ेUF
4
म" 9पांतरण हतुे �णािलयाँ
5. UF4
से UF
6
म" 9पांतरण हतुे �णािलयाँ
6. UF4
से यूरेिनयम धातु म" 9पांतरण हतुे �णािलया ँ
7. UF 6
से UO
2
म" 9पांतरण हतुे �णािलयाँ
8. UF6
से UF
4
म" 9पांतरण हतुे �णािलयाँ
9. UO2
स ेUCI
4
म" 9पांतरण हतुे �णािलयाँ
ग. Tलूटोिनयम के 9पांतरण हतुे संयंQ
1. Tलूटोिनयम नाइhेट से ऑbसाइड म" 9पांतरण हतुे �णािलयां
2. Tलूटोिनयम धातु उXपादन हते ु�णािलयां।
घ. hीिशयम के उXपादन, �ािR, िनvकष�ण, सां0ण या ह4तन हतुे hीिशयम
सुिवधाएं या संयंQ एवं हाइdोजन या हीिलयम
रे(िजरेशन यूिनटE, और हाइdोजन आइसोटोप भंडारण या धातु के हाइdाइडE
का भंडारण या शु
-
8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
ख. (करिणत नािभक�य rधन को घोलने के िलए गरम और अXयंत संHारक 0वE को
सह सकने क� Hमता वाले
ऐसे घोलक (िडजाfवस�) िजKह" दरू से ही भाFरत एवं म"टेन (कया जा सके
।
ग. नाइFhक अmल का संHारक �भाव सह सकने वाले िवलायक िनvकष�क एवं
िवलायक िनvकष�ण उप4कर
घ. नाइFhक अmल का संHारक �भाव सह सकने वाले केिमकल होjfडग अथवा
भंडारण के पाQ
ङ. Kयूhान मापन �णािलयE को (करिणत rधन तXवE के पुन:�सं4करण हतुे
4वचािलत �/म िनयंQण �णाली के
साथ एक�करण एवं उपयोग।
च. अस"ि[लयE और घटकE सिहत िनNिलिखत औ7ोिगक उप4कर
1. उ घनXव (लेड लास अथवा अKय) िव(करण शीjfडग jवडोज
2. िव(करण दढ़ृीभतू टीवी कैमरे अथवा उनके िलए ल"सेस
3. उ शिG के िव4फोटकE के ह4तन हतुे िवशेष 9प से िडजाइन (कए गए
'रोबोट' अथवा 'एंड
इफेbटर' और उसके िलए िनयंQक यूिनट"
4. रेिडयो-रासायिनक पथृरण �चालनE अथवा गम� कHE (हॉट सेfस) म" दरू4थ
(/याP को करने
हतुे उपयोग (कए जा सकने योय दरू4थ पFरचालक (मैनीपुलेटस�) ।
0B004
0B0040B004
0B004
नािभक�य FरएbटरE स ेअथवा `ोत सामDी या िवशेष िवखंडनीय सामDी के
ससंाधन हतुे संयंQE से अथवा
नािभक�य पुनससाधन संयंQE से िनकलने वाले रेिडयोस(/य अपिश@E, (करिणत
नािभक�य rधन; िवशेष
िवखंडनीय सामDी, के उपचार, ह4तन, भंडारण एवं पFरवहन हतुे संयंQ और
उसके िलए िवशेष 9प से
िडजाइन या तैयार (कए गए, अपनाए गए अथवा उपयोग हतुे अिभ�ेत उप4कर
।
0B005
0B0050B005
0B005
िवेषण-उप4करE के अलावा ऐसी सभी �णािलयाँ, संबंिधत उप4कर अथवा घटक
जो यूरेिनयम,
Tलूटोिनयम, लीिथयम अथवा बोरोन के आइसोटोपE के पृथरण या संवध�न हतुे
िवशेष 9प से िडजाइन या
तैयार (कए गए, अपनाए गए, उपयोग (कए गए अथवा उपयोग हतुे अिभ�ेत हE
िजनका िववरण िनNवत ह ै
:
0B005
0B0050B005
0B005
a
aa
a. गैस स"hीयूगE म" उपयोग हतुे िवशेष 9प से िडजाइन अथवा तैयार (कए
गए गैस स"hीयूग, अस"ि[लयाँ
तथा घटक
1. गैस स"hीयूग
2. संपूण� रोटर एस"बिलयE, पतली िभि वाल ेिसjलडर या आपस म" जुड़ ेyए
पतली िभि वाले िसjलडर,
OB005 म" वYणत उ सामय� स ेघनXव के अनुपात वाली एक या एकािधक
सामिDयE स ेिनYमत। य(द
आपस म" जुड़ ेहE तो िसjलडरE को OB005.a.4 म" वYणतानुसार लचीले बेलो
या छfलE से जोड़ा गया
हो। धारा OB005.a.5 और OB005.a.4.6 म" वYणतानुसार रोटर पर एक
आंतFरक बैफल और एंड
कैप लगाये गये हE।
3. रोटर uूब िसjलडर: िवशेषत: िडजाइन (कये गये या तैयार (कये गये
पतली िभि वाले िसjलडर
िजनक� मोटाई 12 िम.मी. या कम, ^ास 75 िम.मी. और 650 िम.मी. के बीच
तथा OB005.a
FटTपणी-1 म" वYणतानुसार एक या एकािधक उ सामय� से घनXव अनुपात वाली
सामिDयE से बनी
हE।
-
¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 9
4. छfले या बेलो: एक रोटर uूब को 4थािनक आधार दनेे या कई रोटर uूबE
को एक साथ जोड़ने हतुे
िवशेष 9प स ेिडजाइिनत और बेलो एक 3 िम.मी. या कम मोटाई स े650
िम.मी. हो। यह घटक धारा
OB005.a क� FटTपणी-1 म" वYणत उ सामय� से घनXव अनुपात वाली सामिDयE
स ेिनYमत हो।
5. बैफल: तlतरी आकार के घटक िजनका ^ास 75 िममी. और 650 िममी. के
बीच हो िजKह" मु_य
सेपरेशन च"बर से टेक-ऑफ च"बर को अलग-थलग करने हेतु एक रोटर uूब के
अंदर लगाने हेतु
िवशेषत: िडजाइन या िनYमत (कया गया हो, और खंड OB005.a क� FटTपणी -1
म" वYणत उ
सामय� से घनXव अनुपात वाली सामिDयE स ेिविनYमत हो।
6. शीष� या अध4तल कैTस : रोटर uूब के अंXय म" (फट होने के िलए
िवशेष 9प स ेिडजाइन या िनYमत
75 एमएम से लकेर 400 एमएम तक के ^ास के िवशेष 9प से िडजाइन या
िनYमत िड4क आकृित के
घटक तथा इस �कार रोटर uूब के अंदर UF
6
को धाFरत करता ह ै तथा कुछ मामलE म" ऊपरी
िबय~रग (शीष� कैप) के घटक को एक�कृत भाग के 9प म" सपोट� करना, बनाए
रखना, समािव@ करना
या मोटर तथा लोअर िबय~रग (अध4तल कैप) के घूण घटकE को वहन करना तथा
ख{ड 0B005.a म"
FटTपणी-1 म" वYणत उ शिG से घनXव अनुपात सामिDयE तक िनYमत।
7. िवशेष 9प से िनYमत चुmबक�य िनलmबन िबय~रग िजनम" िनN दोनE
िवशेषताए ंहM :
क. एक हाऊjसग के अंदर िनलंिबत वलयाकार चुmबक युG िबय~रग असेmबिलया
ँजो “UF6 के संHारण
�ितरोधी सामिDयE” से बनी या रिHत हM (ख{ड 0B005.a के FटTपणी 2
दिेखए) िजसम" अवमंदन
माoयम होता ह ैतथा धुीय खंड वाली चुmबक�य कॅपjलग या रोटर के शीष�
कैप म" (फट दसूरा चुmबक
होता ह।ै
ख. गैस स"hीयूग के साथ �योग के िलए िवशेष 9प से अिभकिfपत या िनYमत
स(/य चुmबक�य
िबय~रग। इन िबय~रगE म" िनNिलिखत िवशेषताएं होती हM :
i) 600 हट�ज या अिधक पर घूम रह े रोटर केिK0त रखने के िलए िडजाइिनत
तथा ii) एक घ{टे से
अिधक काय� करने के िलए िवसनीय िव7ुत आपूYत तथा/या अबािधत िव7ुत
आपूYत (यूपीएस) इकाई
से जुड़ी।
8. िबय~रग/डmपस� : िवशेष 9प स े िडजाइिनत या िनYमत िबय~रस िजसम"
डmपर के ऊपर आ9ढ़
धुराD/कप असेmबली होती ह।ै यह धुराD समाKयत: कठोFरत 4टील शैट का
होता है िजसके एक िशरे
पर अ
-
10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
मोटी या इससे कम क� पतली परतE युG 4तFरक अfप हािन लौह कोर पर
बyचरणीय वाइंjडग हो
सकती ह।ै
11.
11.11.
11. 30 एमएम तक क� िभि मोटाई के दढ़ृ िसल"डर युG गैस स"hीयूग के
रोटर uूब असेmबली युG
स"hीयूग हाऊjसग/Dहीता िजसम" यथाथ�मापी अंXय होते हM जो एक दसूरे के
समानांतर होते हM तथा
0,05 िडDी के अंदर या इससे कम म" िसल"डर के अनुदैoय� अH के अिभलंब
होते हM।
12.
12.12.
12. वायु संघ-दाब निलका के Aारा रोटर uूब के अंदर स ेUF6
िनvकष�ण के िलए uूबE वाले 4कूप तथा
केK0ीय गैस िनvकष�ण �णाली म" (फbस (कए जाने म" सHम।
FटTपणी 1: स"hीयूग रोटे~टग घटकE हतुे �युG सामिDयE म" िनNिलिखत
शािमल ह:ै
(क) 1. 95 GPa या अिधक क� चरम तनन सामय� वाला मरेाjजग 4टील
(ख) 0.46GPa या अिधक क� चरम-तनन सामय� वाला अfयूमीिनयम िमCातु
(ग) संयुG 4hbचर म" उपयोग हतुे उपयुG एवं 3.18x106 मी. या अिधक का
िविश मॉcूfस एवं 7.62x104
मी. या अिधक क� िविश चरम-तनन सामय� वाले (फलाम"टरी सामिDया ं
(िविश मॉcूfस N/m
3
म" िविश भार Aारा िवभािजत N/m
2
म" यंग का मॉcूfस ह;ै िविश चरम-तनन
सामय� N/m
3
म" िविश भार Aारा िवभािजत N/m
2
म" चरम-तनन सामय� ह)ै
FटTपणी 2: िनNत: वYणत मदE म" स ेकुछ या तो UF
6
गैस के साथ सीधे संपक� म" आती हM या स"hीयूज और स"hीयूज से
स"hीयूज और कै4केड से कै4केड म" गैस के �वाह को सीधे िनयंिQत करती
ह।ै UF
6
से संHाFरत होने से मGु
सामिDयE म" शािमल ह-ै तांबा, तांबा िमCातु, 4टेनलेस 4टील,
अfयुमीिनयम, अfयुमीिनयम ऑbसाइड,
अfयुमीिनयम िमCात,ु िनकेल या 60% या अिधक िनकेल युG िमCातु और
लोFरनेटेड हाइdोकाब�न
पॉलीमर।
OB005.b िवशेष 9प से िडजाइिनत या तैयार क� गयी गैस स"hीयूग संवध�न
संयंQE हतुे सहायक �णािलयां, उप4कर
और घटक।
1. स"hीयूग कै4केड के अंदर UF4
ह4तन हतुे मशीन हडेर पाइjपग �णािलया।ं
2. स"hीयूग संवध�न हतुे मोटर 4टेटर सTलाइ करने हतुे िवशेष 9प से
िडजाइिनत या तैयार (कये गये �}" सी च"जर
(कKवट�र या इKवट�र) िजनम" िनNत: वYणत सभी अिभलHण हE और उस हतुे
िवशेष 9प से िडजाइिनत घटक।
(क) 600 H2
या अिधक का मfटीफेज �}" सी आउटपुट; और
(ख) उ 4थाियXव (0.2% से बेहतर �}" सी िनयंQण)
OB005.c गैसीय िडयूजन संवध�न म" उपयोग हतुे िवशेष 9प से िडजाइिनत
या तैयार क� गई अस"बिलयां और घटक
1. गैसीय िडयूजन बैFरयर और UF6
से संHारण का �ितरोधी बैFरयर सामिDयाँ
2. “UF6
स ेसHंारण क� �ितरोधी सामिDयE” से िनYमत या रिHत गैसीय िडयूजन
हाउjसग।
3. कं�ेसर (पॉिजFटव �ित4थापन, स"hीयूगल और अHीय �वाह �कार के) या
गैस [लोअर, िजनक� चूषण आयतन
Hमता 1m
3
/ िमनट या अिधक UF
6
हो,िज4चाज� �ेशर 500KPa तक हो, तथा UF
6
पFरवेश म" दीघा�विध
-
¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 11
�चालन हतुे िडजाइिनत 10:1 या काम का �ेशर अनुपात हो, तथा UF
6
से संHारण क� �ितरोधी सामिDयE से
िनYमत या रिHत हो।
OB005.d गैसीय िवसरण संवध�न म" उपयोग हतुे िवशेषत: िडजाइिनत या
तैयार क� गई सहायक �णािलयां, उप4कर
और घटक :
1. गैसीय
िवसरण कै4केडE के अंतग�त UF
6
के ह4तन हतुे पाइjपग �णािलयां और हडेर �णािलया।ं
OB005.e वायुगितक� संवध�न संयंQE म" उपयोगाथ� िवशेष 9प से िडजाइिनत
या िनYमत �णािलयां, उप4कर और
घटक;
1. िवशेष9प स ेिडजाइिनत या तैयार (कये गये सेपरेशन नॉजल एवं उनक�
एस"बिलयां, सेपरेशन नॉजल कटाव
के आकार वाला 1 िम.मी. से कम व/तायुG पFरिध वाले व(/त चैनल हM जो
UF
6
से होने वाले संHारण-
�ितरोधी सामDी से बने हM और नॉजल के अंदर चाकू जैसी धार बनाते हM
जो नॉजल से �वािहत गैस को दो
िह4सE म" िवभािजत करते हM।
2. िवशेष9प स ेिडजाइिनत या तैयार (कये गये वोटnbस uूब और उनक�
एस"बली। वोटnbस uबू िसjलडर के
आकार के या टेपFरत होते हM और UF
6
जिनत संHारण �ितरोधी सामिDयE से िनYमत या रिHत होती हM
(धारा OB005.a क� FटTपणी 2 देख") और इसम" एक या अिधक 4पश�रेखीय
इनलेट होते हM। यह uूब" (कसी
एक या दोनE िसरE पर नॉजल टाइप के जुडा़व स ेसित होती ह।ै
3. िवशेष9प स ेिडजाइिनत या तैयार (कये गये कं�ेशर या गैस [लोअर जो
UF6
/कैFरयर गैस (हाइdोजन या
हीिलयम) िमCण से संHारण क� �ितरोधी सामिDयE से बनी या रिHत हो।
4. वोटnbस uूबE या सेपरेशन नॉजलE का संरोधन करने हतुे UF6
से संHारण क� �ितरोधी सामिDयE से
िनYमत या रिHत िवशेष 9प से िडजाइिनत या तैयार क� गयी सेपरेशन तXव
हाउjसग;
5. वायुगितक�य कै4केडE के अंदर, UF6
के ह4तन हतुे UF
6
से सHंारण क� �ितरोधी सामिDयE स ेिनYमत या
रिHत िवशेष 9प से िडजाइिनत या तैयार क� गयी हडेर-पाइjपग
�णािलयां;
6. UF6
/कैFरयर सेपरेशन �णािलयां, कैFरयर गैस (हाइdोजन या हीिलयम) से
UF
6
को अलग करने हतुे;
OB005.f रसायन िविनमय या आयन िविनमय संवध�न संयंQE म" उपयोग हतुे
िवशेष 9प से िडजाइिनत या तैयार क� गई
�णािलया,ं उप4कर और घटक।
1. रसायन िविनमय �ोससे का उपयोग कर यूरेिनयम संवध�न के िलए िवशेष
9प स े िडजाइिनत या तैयार क� गयी
यांिQक पावर इनपुट वाले �ितधारा 0व-0व िविनमय कॉलम (रसायन िविनमय)।
यह कॉलम और इनके आंतFरक
भाग सामाKयत: ऐसी सामिDयE से िनYमत (कये जाते हM जो सां(0त
हाइdोbलोFरक एिसड घोलE Aारा संHारण के
�ितरोधी हE। कॉलम का 4टेज रेिजड"स समय सामाKयत: 30 सेक" ड या कम
होना िडजाइन (कया जाता ह।ै
-
12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
2. 0व-0व स"hीयूग कांटैbटस� (रसायन-िविनमय), जो रसायन िविनमय �ोससे
का उपयोग करने वाले यूरेिनयम
संवध�न हतुे िवशेष 9प से िडजाइिनत या तैयार (कये जाते हM। ऐसे
कांटैbटर सां(0त हाइdोbलोFरक एिसड घोलE से
होने वाले संHारण के �ितरोधी सामिDयE से बनाये या रिHत (कये जाते
हM। कॉलम का 4टेज रेिजड"स समय
सामाKयत: 30 सके" ड या इससे कम िडजाइिनत (कया जाता ह।ै
3. यूरेिनयम िनvकष�ण �णािलयां और उप4कर (रसायन िविनमय):
क. रसायन िविनमय �ोसेस का उपयोग करते yए, यूरेिनयम संवध�न हतुे
यूरेिनयम को एक सयंोजक ि4थित स ेदसूरी
म" Fरcूस करने हतुे िवशेष 9प से िडजाइjनग या तैयार (कये गये िव7ुत
रसायिनक Fरडbशन सेल �ोसेस घोलE
से संपक� म" आने वाली सेल सामिDयां, सां(0त हाइdोbलोFरक एिसड
सॉfयूशनE Aारा होने वाले संHारण क�
�ितरोधी होनी चािहए।
ख. U+4 को काब�िनक धारा से बाहर िनकालने हतुे कॉ4केड के �ोडbट एंड
पर िवलायक िनvकष�ण उप4कर और पंपE
या अKय hांसफर युिGयE वाले िवशेष 9प से िडजाइन या तैयार क� गई
�णािलयां।
4. उ पFरशु< यूरेिनयम bलोराइड का उXपादन करने हतुे िवलयनन,
िवलायक िनvकष�ण और/या आयन िविनयम
उपकरण युG फ�ड तैयारी �णािलया ं(रसायन िविनमय)।
5. यूरेिनयम ऑिbसडेसन �णािलयां (रसायन-िविनमय) U+3 से U+4 म"
आिbसडेसन हतुे।
6. 0तु-अिभ(/याकारी आयन िविनमय रेिजन/अवशोषक (आयन एbसच"ज)
रसायन-िविनमय �ोसेस का उपयोग कर
यूरेिनयम संवध�न हतुे िवशेष 9प से िडजाइन या बनाये गये 0तु
अिभ(/याकारी आयन िविनमय रेिजन या
अिधशोषक िजनम" िछ0युG मै/ोरेFटकुलर रेिजन और/या पेिलकुलर 4hbचर या
अKय सयुंG 4hbचर (कसी भी
उपयुG 9प म" जैसे कणE या फाइबर जो सां(0त हाइdोbलोFरक एिसड घोलE के
�ित रसायिनक 9प स े�ितरोधी ह।ै
7. आयन िविनमय कॉलम (आयन-िविनमय)
अKय िविनमय रेिजन/ अिधशोषक के पैbड सं4तर को धाFरत एवं आधार दनेे
वाले तथा सां(0त हाइdोbलोFरक एिसड
घोलE Aारा संHारण क� �ितरोधी सामिDयE से िनYमत या रिHत िसjलडरनुमा
कॉलम।
8. आयन िविनमय Fरलbस �णािलया ं(आयन िविनमय)
आयन िविनमय संवध�न का4केडE म" उपयोग (कया जाने वाला रसायन
ऑिbसडाइjजग या Fरcूjसग एज"टE के पुन:
उXपादन हतुे रसायिनक या िव7ुत रसायिनक ऑिbसडसेन या Fरडbशन
�णािलया।ं
OB005.g लेसर आधाFरत संवध�न संयंQE म" उपयोग हतुे िवशेष 9प से
िडजाइन या तैयार क� गयी �णािलयां, उप4कर
और घटक।
1. यूरेिनयम वाvपीकरण �णािलयां (परमाणु वाvपन आधाFरत प
-
¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 13
4. सेपरेटर मॉcलू हाउjसग (परमाणु वाvपन आधाFरत प
-
14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
2. UF6
जिनत संHारण क� �ितरोधी सामिDयE से िनYमत या रिHत तथा ह4तचािलत या
4वचािलत शट-ऑफ
या कंhोल काय� वाले िवशेष शट ऑफ वाfब, कंhोल वाfब, बेलो सीfड
वाfब।
3. UF6
गैस 4hीम स ेऑन-लाइन नमूने लेने म" सHम UF
6
मास 4पेbhोमीटर/आयन `ोत।
4. कं�ेशरE या [लोअरE हतुे रोटरी शाट सील।
5. UF6
जिनत संHारण क� �ितरोधी सामिDयE स ेिनYमत या संरिHत हीट-
िविनयामक।
6. UF6
जिनत संHारण क� �ितरोधी सामिDयE से िनYमत या संरिHत िनवा�त
मैनीफोfqस, िनवा�त हडेस� और
िनवा�त पंप सिहत िनवा�त �णािलयां।
FटTपणी 1: Cेणी OB005 के अंतग�त �दYशत िनयंQण, उन संयंQE और उप4करE
पर भी लागू होते हM, जो अKय तXवE के
आइसोटोप पृथरण हतुे अिभ�ते हM।
FटTपणी 2: “अKय तXव” से ताXपय� ह ैहाइdोजन, यूरेिनयम और Tलूटोिनयम
के अलावा सभी तXव।
0B006 नािभक�य Fरएbटर rधन घटकE के संिवरचन के िलए संयंQ तथा िवशेष
9प से िडजाइिनत या िनYमत िजसम"
िनNिलिखत शािमल हM ले(कन िनNिलिखत तक सीिमत नहS हM :
(क) पूण� 9प से 4वचािलत पेलेट िनरीHण 4टेशन जो rधन पेलेट के अंितम
िवमाP तथा पृ QुFटयE क� जाँच करने
के िलए िवशेष 9प स ेिडजाइिनत या िनYमत।
(ख) 4वचािलत वेjfडग मशीन जो rधन िपनE (या राडE) पर अंXय कैप क�
वेjfडग करने के िलए िवशेष 9प से
िडजाइिनत या िनYमत।
(ग) 4वचािलत परीHण तथा िनरीHण 4टेशन जो संपूण� rधन िपनE (या राड)
क� अख{डता क� जाँच करने के िलए
िवशेष 9प से िडजाइिनत या िनYमत।
(घ) नािभक�य rधन bलैjडग के िनमा�ण के िलए िवशेष 9प से िडजाइिनत या
िनYमत।
मद ‘ग’ म" �9पी 9प म" य ेउपकरण शािमल हM 1) िपन (या राड) अंXय कैप
वेfड क� एbस-रे परीHण, 2) दािबत
िपनE (या राड) स ेहीिलयम लीक िडटेbशन, 3) अंदर rधन पेलेट क� सही
भरण को जाँचने के िलए िपनE (या राड)
क� गामा 4कैjनग।
0B007 100 bयूरीज (3.7X10
12
बेकुरल) से अिधक होने वाली रेिडयोआइसोटोप क� माQाP के उXपादन,
ह4तन, भंडारण तथा पFरवहन के िलए सयंंQ या �णािलयां।
0B008 Kयूhान जनरेटर िजसम" Kयूhान Cृंखला असेmबिलयां तथा िवखंc
पदाथ3 को उXपादन करने के िलए
सभी �कार क� सलंयन असेmबली शािमल ह।ै
0C �ौ7ोिगक� तथा साटवेअर
0A या 0B म" िविन?द@ िविहत पदाथ3 या िविहत उपकरण के िवकास, उXपादन
या �योग के िलए
�ौ7ोिगक� या साटवेअर।
[फा. सं. 32/02/2016-ईआर]
संजीव सूद, संयुG सिचव
-
¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 15
DEPARTMENT OF ATOMIC ENERGY
NOTIFICATION
Mumbai, the 28th April, 2016
Subject: Updation of List of Prescribed Substances, Prescribed
Equipment and Technology Under Atomic
Energy Act 1962
S.O. 1592(E).—In pursuance of clauses (f) and (g) of sub-section
(1) of Section 2 and Section 3 of the Atomic Energy Act,
1962 (No. 33 of 1962) and in supersession of the notifications
of the Government of India in the Department of Atomic
Energy vide number S.O. 61(E) dated 20th January 2006, the
Central Government hereby notifies the substances, equipment
and technology specified in the Schedule appended hereto as
‘Prescribed Substances, Prescribed Equipment and Technology’.
SCHEDULE
Category 0 Nuclear materials, nuclear-related other materials,
equipment and technology
0A PRESCRIBED SUBSTANCES Note: Any radioactive material in
Category 0A shall additionally attract the provisions of Radiation
Protection Rules,
2004 made under the Atomic Energy Act, 1962 and the provisions
of Section-16 of the Atomic Energy Act, 1962.
0A1 Source Material
0A101 Uranium containing the mixture of isotopes occurring in
nature.
0A102 Uranium depleted in the isotope 235.
0A103 Thorium.
0A104 Any of the materials specified above in 0A101, 0A102, or
0A103 in the form of metal, alloy, chemical
compound, or concentrate.
0A105 Any other material containing one or more of the
foregoing.
Note 1: Source material includes uranium and thorium ores or
concentrates. Note 2:
Exports of following items, for the use only in non-nuclear
activities, to a given recipient country, within a period of one
calendar year, not exceeding the limits specified below, are not
controlled:
a. Uranium (containing the mixture of isotopes in nature): 100
kilograms. b. Depleted uranium (uranium depleted in the isotope 235
below that occurring in nature): 1000 kilograms.
c. Thorium: 1000 kilograms. Note 3: 0A1 does not control
following –
i. Uranium and thorium ores, mineral concentrates or other
materials that contain less than 300 parts per million (ppm) of
uranium or/and thorium;
ii. Alloys containing less than 5 % thorium; iii. Ceramic
products containing thorium, which have been manufactured for
non-
nuclear use.
0A2 Special Fissionable Material
0A201 Plutonium-239.
0A202 Uranium-233.
0A203 Uranium enriched in the isotopes 235 or 233.
0A204 Neptunium.
-
16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
0A205 Any material containing one or more of the foregoing.
0A206 Such other fissionable material determined by the Central
Government from time to time.
Technical note:
The term “uranium enriched in the isotopes 235 or 233” means
uranium containing the
isotopes 235 or 233 or both in an amount such that the abundance
ratio of the sum of these
isotopes to the isotope 238 is greater than the ratio of the
isotope 235 to the isotope 238
occurring in nature.
Note:
1. The term “special fissionable material” does not include
source material.
2. Any quantity of special fissionable material is prescribed
substance.
3. 0A2 does not control -
a. Plutonium with an isotopic concentration of plutonium-238
exceeding 80%, and
b. Special fissionable material when used in gram quantities or
less as a sensing component
in instruments.
0A3 Other Materials ‘Other Materials’ means non-nuclear
materials for reactors, nuclear related dual-use materials
indicated
below and such materials as determined by the Central Government
from time to time.
0A301 Deuterium and heavy water
Deuterium, heavy water (deuterium oxide) and any other deuterium
compound, in which the ratio of
deuterium to hydrogen atoms exceeds 1:5000,
a) for use in a nuclear reactor in quantities exceeding 5
kilograms of deuterium atoms in one consignment or 25 kilograms of
deuterium atoms, for any one recipient country within a period
of one calendar year.
b) for use in a non-nuclear activity in quantities exceeding 200
kilograms of deuterium atoms, for any one recipient country within
a period of one calendar year.
0A302 Nuclear grade graphite
Nuclear grade graphite having a purity level better than 5 parts
per
million (ppm) boron equivalent and with a density greater than
1.5 gram/cc -
a) for use in a nuclear reactor or any other nuclear activities
in quantities exceeding 1 kilogram; . b) for use in non-nuclear
activities in quantities exceeding 30 metric tons for any one
recipient
country within a period of one calendar year.
Note: The item 0A302 does not cover graphite powder.
0A303 Zirconium with hafnium content of less than 1 part to 500
parts of zirconium by weight (i.e. less than
2000 ppm) in the form of metal, alloys containing more than 50%
zirconium by weight, compounds,
manufactures thereof, waste or scrap of any of the
foregoing.
0A304 Beryllium metal, its compounds, alloys containing more
than 50% beryllium by weight, manufactures
thereof, and waste or scrap of any of the foregoing and its
minerals / concentrates including Beryl but
excluding:
a. beryllium windows used for x-ray machines or for bore-hole
logging devices, and b. beryl in the form of emerald, aquamarine or
‘cut & polished’ semi-precious stones for use in
jewellery.
0A305 Lithium enriched in the Lithium-6 (6Li) isotope to greater
than its natural isotopic abundance (i.e. more
than 7.5%) and the products or devices containing enriched
lithium such as elemental lithium, alloys,
compounds, mixtures containing lithium, manufactures thereof,
waste or scrap of any of the foregoing.
0A306 Niobium and Tantalum, their metals, alloys and minerals
including columbite and tantalite.
-
¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 17
0A307 Reserved
0A308 Tritium, tritium compounds or mixtures containing tritium
in which the ratio of tritium to hydrogen
atoms exceeds 1 part in 1000, except when utilized in such
quantities and for such purposes as for
organic labelled compounds, Gas Filled Light Sources and as
Tritiated Water for radiotracer studies.
0A309 Hafnium:
Hafnium metal, alloys containing more than 60% hafnium by
weight, hafnium compounds containing
more than 60% hafnium by weight, manufactures thereof, and waste
or scrap of any of the foregoing.
0A310 Radium-226:
Radium-226 (226
Ra), radium-226 alloys, radium-226 compounds, mixtures
containing radium-226,
manufactures thereof, and products or devices containing any of
the foregoing, except medical
applicators and a product or device containing less than 0.37
GBq (10mCi) of Ra-226 in any form.
0A311 Boron
Boron enriched in the Boron-10 (10
B) isotope to greater than its natural isotopic abundance as
follows:
Elemental boron, compounds, mixtures containing boron,
manufactures thereof, waste or scrap of any of
the foregoing.
0A312 Helium-3
Helium-3 (3He), mixtures containing helium-3, and products or
devices containing any of the foregoing.
Note: A product or device containing less than 1gm of Helium-3
is excluded.
0A313 ‘Radionuclides’ appropriate for making neutron sources
based on alpha-n reaction, in the following
forms:
a. Elemental; b. Compounds having a total activity of 37 GBq per
kg or greater; c. Mixtures having a total activity of 37 GBq per kg
or greater; d. Products or devices containing any of the
foregoing.
Radionuclides controlled by this item include:
Actinium-225 Actinium-227 Californium-253
Curium-240 Curium-241 Curium-242
Curium-243 Curium-244 Einsteinium-253
Einsteinium-254 Gadolinium-148 Plutonium-236
Plutonium-238 Polonium-209 Polonium-210
Polonium-208 Radium-223 Thorium-228
Thorium-227 Uranium-230 Uranium-232
-
18 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
0B Prescribed Equipment
0B001 Nuclear Reactors; associated equipment, components, and
systems especially designed, prepared, or
adapted or used or intended to be used in such reactors
including but not limited to:-
a. Complete nuclear reactors b. Nuclear reactor vessels c.
Nuclear reactor fuel charging and discharging machines d. Nuclear
reactor control rods and equipment e. Nuclear reactor pressure
tubes f. Nuclear fuel cladding: Zirconium metal tubes or zirconium
alloy tubes (or assemblies of
tubes), in which hafnium to zirconium ratio is 1:500 or less,
for use as nuclear fuel cladding.
g. Primary coolant pumps or circulators h. Nuclear reactor
internals i. Heat exchangers (steam generators) for use in the
primary or intermediate coolant circuit of
a nuclear reactor
j. Neutron detectors k. External thermal shields.
0B002 Plants for processing, production, concentration,
conversion or recovery of Prescribed Substances
(such as uranium, plutonium, thorium, deuterium, heavy water,
tritium, lithium); associated
equipment, components and systems especially designed, prepared
or adapted or used or intended to
be used in such plants including but not limited to:
a. Plants for production or concentration of deuterium, heavy
water or deuterium compounds- 1. Water - Hydrogen Sulphide Exchange
Towers with diameters of 1.5 m or greater
and capable of operating at pressures greater than or equal to 2
MPa (300 psi),
especially designed or prepared for heavy water production.
2. Especially designed or prepared blowers and compressors for
hydrogen-sulphide gas circulation. These blowers or compressors
have a throughput capacity greater
than or equal to 56 m3/second (120,000 SCFM) while operating at
pressures
greater than or equal to 1.8 MPa (260 psi) suction and have
seals designed for wet
H2S service
3. Ammonia-Hydrogen Exchange Towers greater than or equal to 35
m in height with diameters of 1.5 m to 2.5 m capable of operating
at pressures greater than 15 MPa
especially designed or prepared for heavy water production
4. Tower Internals and Stage Pumps: Tower internals and stage
pumps especially designed or prepared for heavy water production.
Tower internals include
especially designed stage contactors which promote intimate
gas/liquid contact.
Stage pumps include especially designed submersible pumps for
circulation of
liquid ammonia within a contacting stage internal to the stage
towers.
5. Ammonia Crackers with operating pressures greater than or
equal to 3 MPa especially designed or prepared for heavy water
production.
6. Infrared Absorption Analyzers capable of ‘on-line’
hydrogen/deuterium ratio analysis
7. Catalytic Burners for conversion of enriched deuterium gas
into heavy water 8. Complete heavy water upgrade systems or columns
therefor 9. Ammonia synthesis converters or synthesis units for
heavy water production
utilizing the ammonia-hydrogen exchange process.
b. Plants for the conversion of uranium 1. Systems for the
conversion of uranium ore concentrates to UO3; 2. Systems for the
conversion of UO3 to UF6; 3. Systems for the conversion of UO3 to
UO2; 4. Systems for the conversion of UO2 to UF4; 5. Systems for
the conversion of UF4 to UF6; 6. Systems for the conversion of UF4
to uranium metal; 7. Systems for the conversion of UF6 to UO2; 8.
Systems for the conversion of UF6 to UF4; 9. Systems for the
conversion of UO2 to UCl4.
-
¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 19
c. Plants for the conversion of plutonium
1. systems for the conversion of plutonium nitrate to oxide 2.
systems for plutonium metal production
d. Tritium facilities or plants for the production, recovery,
extraction, concentration or handling of tritium and equipment
therefor including hydrogen or helium refrigeration
units; and hydrogen isotope storage or purification systems
using metal hydrides as the
storage or purification medium.
e. Lithium isotope separation facilities or plants, and systems
and equipment therefor as follows -
1. Facilities or plants for the separation of lithium isotopes;
2. Equipment for the separation of lithium isotopes based on the
lithium-mercury amalgam
process, as follows:
(a) Packed liquid-liquid exchange columns especially designed
for lithium amalgams; (b) Mercury or lithium amalgam pumps; (c)
Lithium amalgam electrolysis cells; (d) Evaporators for
concentrated lithium hydroxide solution;
3. Ion exchange systems especially designed for lithium isotope
separation, and especially designed component parts therefor;
4. Chemical exchange systems (employing crown ethers, cryptands,
or lariat ethers) especially designed for lithium isotope
separation, and especially designed component parts
therefor.
0B003 Plants for reprocessing of irradiated nuclear fuel and
equipment, components and systems especially
designed, prepared or adapted or used or intended to be used in
such plants, including but not limited
to:
a. Irradiated fuel element chopping machines designed for remote
operation
b. Dissolvers capable of withstanding hot and highly corrosive
liquid for dissolution of irradiated nuclear fuel and which can be
remotely loaded and maintained
c. Solvent extractors and solvent extraction equipment resistant
to the corrosive effect of nitric acid
d. Chemical holding or storage vessels resistant to the
corrosive effect of nitric acid
e. Neutron measurement systems for integration and use with
automated process control systems for the reprocessing of
irradiated fuel elements.
f. Industrial equipment including assemblies and components as
follows:
1. High density (lead glass or other) radiation shielding
windows
2. Radiation hardened TV cameras, or lenses therefor
3. ‘Robots’ or ‘end effectors’ especially designed for handling
high explosives; and control units therefor
4. Remote manipulators that can be used to provide remote
actions in radiochemical separation operations or hot cells.
0B004 Plants for treatment, handling, storage and transportation
of radioactive wastes from nuclear reactors
or from plants for processing Source Materials or Special
Fissionable Materials or from nuclear
reprocessing plants; irradiated nuclear fuel; Special
Fissionable Materials, and equipment especially
designed, prepared, adapted, or intended to be used
therefor.
0B005 All systems, associated equipment, components for
separation or enrichment of isotopes of uranium,
plutonium, lithium, boron or other elements, other than
analytical instruments, especially designed,
prepared, adapted, used or intended to be used therefor as
follows:
-
20 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
0B005.a Gas centrifuges and assemblies and components especially
designed or prepared for use in gas
Centrifuges
1. Gas centrifuges; 2. Complete rotor assemblies; Thin-walled
cylinders, or a number of interconnected thin-walled
cylinders, manufactured from one or more of the high strength to
density ratio materials
described in the Note-1 in 0B005.a. If interconnected, the
cylinders are joined together by
flexible bellows or rings as described in section 0B005.a.4
following. The rotor is fitted with an
internal baffle(s) and end caps, as described in section
0B005.a.5 and 0B005.a.4.6 following, if
in final form.
3. Rotor tube cylinders: Especially designed or prepared
thin-walled cylinders with thickness of 12 mm or less, a diameter
of between 75 mm and 650 mm, and manufactured from one or more
of
‘high strength-to-density ratio materials’ described in the
Note-1 in 0B005.a;
4. Rings or bellows: Components especially designed to give
local support to a rotor tube or to join together a number of rotor
tubes, and the bellows is a short cylinder of wall thickness 3 mm
or
less, a diameter of between 75 mm and 650 mm. These components
are made from ‘high
strength-to-density ratio materials’ described in the Note-1 in
Section 0B005.a;
5. Baffles: Disc-shaped components of between 75 mm and 650 mm
diameter especially designed or prepared for mounting inside a
rotor tube, in order to isolate the take-off chamber from the
main separation chamber and manufactured from ‘high
strength-to-density ratio materials’
described in the Note-1 in Section 0B005.a.
6. Top or bottom caps: Especially designed or prepared
disc-shaped components of between 75 mm and 400 mm diameter
especially designed or prepared to fit the ends of a rotor tube,
and so
contain the UF6 within the rotor tube, and in some cases to
support, retain or contain as an
integrated part an element of the upper bearing (top cap) or to
carry the rotating elements of the
motor and lower bearing (bottom cap), and manufactured from
‘high strength-to-density ratio
materials’ described in the Note-1 in Section 0B005.a;
7. Especially prepared Magnetic Suspension Bearings with both of
the following attributes: a. Bearing assemblies consisting of an
annular magnet suspended within a housing made of or
protected by “materials resistant to corrosion by UF6” (see Note
2 of Section 0B005.a)
containing a damping medium and having the magnet coupling with
a pole piece or second
magnet fitted to the top cap of the rotor;
b. Active magnetic bearings especially designed or prepared for
use with gas centrifuges. These bearings usually have the following
characteristics: i) Designed to keep centred a
rotor spinning at 600 Hz or more; and ii) Associated to a
reliable electrical power supply
and/or to an uninterruptible power supply (UPS) unit in order to
function for more than one
hour.
8. Bearings / Dampers: Especially designed or prepared bearings
comprising a pivot/cup assembly mounted on a damper. The pivot is
normally a hardened steel shaft with a hemisphere at one end
with a means of attachment to the bottom cap described in
section 0B005.a.6 at the other. The
shaft may however have a hydrodynamic bearing attached. The cup
is pellet-shaped with a
hemispherical indentation in one surface. These components are
often supplied separately to the
damper.
9. Molecular pumps: Molecular pumps are high vacuum pumps
consisting of especially designed or prepared cylinders having
internally machined or extruded helical grooves and internally
machined bores. Typical dimensions are as follows: 75 mm to 650
mm internal diameter, 10 mm
or more wall thickness, with the length equal to or greater than
the diameter. The grooves are
typically rectangular in cross-section and 2 mm or more in
depth.
10. Ring-shaped motor stators: Especially designed or prepared
ring-shaped stators for high speed multiphase AC hysteresis (or
reluctance) motors for synchronous operation within a vacuum at
a
frequency of 600 Hz or greater and a power of 40 VA or greater.
The stators may consist of
multi-phase windings on a laminated low loss iron core comprised
of thin layers typically 2.0
mm thick or less.
11. Centrifuge housing/recipients to contain the rotor tube
assembly of a gas centrifuge consisting of rigid cylinder of wall
thickness up to 30 mm with precision machined ends that are
parallel to
each other and perpendicular to the cylinder's longitudinal axis
to within 0,05 degrees or less.
12. Scoops consisting of tubes for the extraction of UF6 gas
from within the rotor tube by a Pitot tube action and capable of
being fixed to the central gas extraction system.
Note 1: The materials used for centrifuge rotating components
include the following:
(a) Maraging steel capable of an ultimate tensile strength of
1.95 GPa or more;
(b) Aluminium alloys capable of an ultimate tensile strength of
0.46 GPa or more;
-
¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 21
(c) Filamentary materials suitable for use in composite
structures and having a specific
modulus of 3.18 X 106 m or greater and a specific ultimate
tensile strength of 7.62 X
104 m or greater ('Specific Modulus' is the Young's Modulus in
N/m
2 divided by the
specific weight in N/m3; 'Specific Ultimate Tensile Strength' is
the ultimate tensile
strength in N/ m2 divided by the specific weight in N/ m
3).
Note 2: Some of the items listed below either come into direct
contact with the UF6 process gas or
directly control the centrifuges and the passage of the gas from
centrifuge to centrifuge and
cascade to cascade. Materials resistant to corrosion by UF6
include copper, copper alloys,
stainless steel, aluminium, aluminium oxide, aluminium alloys,
nickel or alloys containing 60%
or more nickel and fluorinated hydrocarbon polymers.
0B005.b Especially designed or prepared auxiliary systems,
equipment and components for gas centrifuge
enrichment plants.
1. Machine header piping systems for handling UF6 within the
centrifuge cascades; 2. Frequency changers (converters or
inverters) especially designed or prepared to supply motor
stators for gas centrifuge enrichment, having all of the
following characteristics, and especially
designed components therefor:
a. A multiphase frequency output of 600 Hz or greater; and b.
High stability (with frequency control better than 0.2 %).
0B005.c Especially designed or prepared assemblies and
components for use in gaseous diffusion enrichment.
1. Gaseous diffusion barriers and barrier materials resistant to
corrosion by UF6; 2. Gaseous diffuser housings made of or protected
by “materials resistant to corrosion by UF6”; 3. Compressors
(positive displacement, centrifugal and axial flow types) or gas
blowers with a
suction volume capacity of 1 m3 /min or more of UF6, discharge
pressure up to 500 kPa and
having a pressure ratio of 10:1 or less designed for long term
operation in the UF6 environment
and made of or protected by “materials resistant to corrosion by
UF6”.
0B005.d Especially designed or prepared auxiliary systems,
equipment and components for use in gaseous
diffusion enrichment:
1. Piping systems and header systems for handling UF6 within the
gaseous diffusion cascades.
0B005.e Especially designed or prepared systems, equipment and
components for use in aerodynamic
enrichment plants:
1. Especially designed or prepared separation nozzles and
assemblies thereof. The separation nozzles consist of slit-shaped,
curved channels having a radius of curvature less than 1 mm,
made of materials resistant to corrosion by UF6 and having a
knife-edge within the nozzle that
separates the gas flowing through the nozzle into two
fractions;
2. Especially designed or prepared vortex tubes and assemblies
thereof. The vortex tubes are cylindrical or tapered, made of or
protected by materials resistant to corrosion by UF6 (see Note
2 of Section 0B005.a), and with one or more tangential inlets.
The tubes may be equipped with
nozzle type appendages at either or both ends;
3. Especially designed or prepared compressors or gas-blowers
made of or protected by materials resistant to corrosion by the
UF6/carrier gas (hydrogen or helium) mixture;
4. Especially designed or prepared separation element housings
made of or protected by materials resistant to corrosion by UF6,
for containing vortex tubes or separation nozzles;
5. Especially designed or prepared header-piping systems, made
of or protected by materials resistant to corrosion by UF6, for
handling UF6 within the aerodynamic cascades;
6. UF6/carrier gas separation systems for separating UF6 from
carrier gas (hydrogen or helium).
0B005.f Especially designed or prepared systems, equipment and
components for use in chemical exchange or
ion exchange enrichment plants.
1. Countercurrent Liquid-liquid exchange columns (Chemical
exchange), having mechanical power input, especially designed or
prepared for uranium enrichment using the chemical
exchange process. For corrosion resistance to concentrated
hydrochloric acid solutions, these
columns and their internals are normally made of or protected by
materials resistant to corrosion
by concentrated hydrochloric acid solutions. The stage residence
time of the columns is
normally designed to be 30 seconds or less.
-
22 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
2. Liquid-liquid centrifugal contactors (Chemical exchange),
especially designed or prepared for
uranium enrichment using the chemical exchange process. Such
contractors are made of or
protected by materials resistant to corrosion by concentrated
hydrochloric acid solutions, The
stage residence time of the columns is normally designed to be
30 seconds or less.
3. Uranium reduction systems and equipment (Chemical exchange):
a. Especially designed or prepared electrochemical reduction cells
to reduce uranium
from one valence state to another for uranium enrichment using
the chemical exchange
process. The cell materials in contact with process solutions
must be corrosion resistant
to concentrated hydrochloric acid solutions;
b. Especially designed or prepared systems consisting of solvent
extraction equipment and pumps or other transfer devices at the
product end of the cascade for taking the U+4 out
of the organic stream.
4. Feed preparation systems (Chemical exchange) consisting of
dissolution, solvent extraction and/or ion exchange equipment for
producing high-purity uranium chloride.
5. Uranium oxidation systems (Chemical exchange) for oxidation
of U+3 to U+4
6. Fast-reacting ion exchange resins/adsorbents (Ion exchange):
Fast-reacting ion-exchange resins or adsorbents, especially
designed or prepared for
uranium enrichment using the chemical exchange process,
including porous macroreticular resins, and/or pellicular
structures and other composite structures in any suitable form
including particles or fibres chemically resistant to concentrated
hydrochloric acid solutions.
7. Ion exchange columns (Ion exchange): Cylindrical columns for
containing and supporting packed beds of ion exchange
resin/adsorbent and made of or protected by materials resistant to
corrosion by concentrated hydrochloric acid solutions.
8. Ion exchange reflux systems (Ion exchange): Chemical or
electrochemical oxidation or reduction systems for regeneration of
the
chemical oxidizing or reducing agent(s) used in ion exchange
enrichment cascades.
0B005.g Especially designed or prepared systems, equipment and
components for use in laser-based
enrichment plants.
1. Uranium vaporization systems (atomic vapour based methods) 2.
Liquid or vapour uranium metal handling systems and components
(atomic vapour based
methods)
3. Uranium metal ‘product’ and ‘tails’ collector assemblies
(atomic vapour based methods) 4. Separator module housings (atomic
vapour based methods) 5. Supersonic expansion nozzles (molecular
based methods) 6. ‘Product’ or ‘tails’ collectors (molecular based
methods) 7. UF6/carrier gas compressors (molecular based methods)
8. Rotary shaft seals (molecular based methods) 9. Fluorination
systems (molecular based methods) 10. UF6/carrier gas separation
systems (molecular based methods) 11. ‘Lasers’ or ‘laser systems or
components’ for the separation of uranium isotopes.
0B005.h Especially designed or prepared systems, equipment and
components for use in plasma separation
enrichment plants.
1. Microwave power sources and antennae: Especially designed or
prepared microwave power sources and antennae for producing or
accelerating ions and having the following
characteristics: greater than 30 GHz frequency and greater than
50 kW mean power output for
ion production.
2. Radio frequency ion excitation coils for frequencies of more
than 100 kHz 3. Uranium plasma generation systems 4. Uranium metal
‘product’ and ‘tails’ collector assemblies made of or protected by
materials
resistant to the heat and corrosion of uranium metal vapour.
5. Separator module housings (cylindrical vessels) for
containing the uranium plasma source, radio-frequency drive coil
and the ‘product’ and ‘tails’ collectors.
-
¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 23
0B005.i Especially designed or prepared systems, equipment and
components for use in electromagnetic
enrichment plants.
1. Electromagnetic isotope separators for separation of uranium
isotopes and equipment and components therefor, including ion
sources (consisting of a vapour source, ionizer, and
beam accelerator), ion collectors (consisting of collector
plates), vacuum housings and
magnet pole pieces;
2. High voltage power supplies for ion sources: Especially
designed or prepared high-voltage power supplies for ion sources,
having all of the following characteristics: capable of
continuous operation, output voltage of 20,000 V or greater,
output current of 1 A or
greater, and voltage regulation of better than 0.01% over a time
per