Page 1 HAZLIST Update To: HAZLIST Distribution From: David W. Boston CC: OOT Responsible Persons (Godley), OOT Product Update Notifications Group, OOT-APRV-055 Igniter Group File: 0100.055 Date: July 16, 2019 Re: DOT Approval Notice: OOT-APRV-055 Igniter Family, EX2008120360 4 th Revision adds Type E (Power charge igniter) to approval DOT has added Type E (Power charge igniter) to the OOT-APRV-055 Igniter Family manufactured and distributed by Owen Oil Tools LP. This revision affects future products added to this family and does not change the classification previously assigned to members of the OOT-APRV-055 Igniter Family Table 1 provides approval specifics and Table 2, marking and labeling instructions. Table 1: Approval Specifics -- OOT-APRV-055 Igniter Family Products Approved: Type A (power charge igniters) Type B (core load igniters) Type C (power charge igniters) Type D (swing jet release) Type E (Power charge igniter) As depicted on drawing OOT-APRV-055A, Rev.3 EX-Number: EX2008120360, 4th Revision ID Number: UN0454 Proper Shipping Name: Igniters Division and Compatibility Group: 1.4S Limitations: Applies to igniters matching configuration and content presented on drawing OOT-APRV-055A, Rev.3 P.O. Box 765 Godley, TX 76044-0765 Tel: +1 (817) 551-0660 Fax: +1 (817) 396-4584 e-mail: [email protected]1.4 EXPLOSIVES 1 S OWEN WEN WEN COMPLIANCE OMPLIANCE OMPLIANCE SERVICES, ERVICES, ERVICES, INC. NC. NC.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
4th Revision adds Type E (Power charge igniter) to approval
DOT has added Type E (Power charge igniter) to the OOT-APRV-055 Igniter Family manufactured and distributed by Owen Oil Tools LP. This revision affects future products added to this family and does not change the classification previously assigned to members of the OOT-APRV-055 Igniter Family
Table 1 provides approval specifics and Table 2, marking and labeling instructions.
Table 1: Approval Specifics -- OOT-APRV-055 Igniter Family
Products Approved: Type A (power charge igniters) Type B (core load igniters) Type C (power charge igniters) Type D (swing jet release) Type E (Power charge igniter) As depicted on drawing OOT-APRV-055A, Rev.3
EX-Number: EX2008120360, 4th Revision
ID Number: UN0454
Proper Shipping Name: Igniters
Division and Compatibility Group:
1.4S
Limitations: Applies to igniters matching configuration and content presented on drawing OOT-APRV-055A, Rev.3
Outer: UN 4G fiberboard box, each containing not more than fifty (50) inner packagings uniformly segregated from one another and the box sidewalls by not less that three layers of corrugated fiberboard divider pieces and with top and bottom fiberboard pads.
Inner: Boxes, chipboard, each containing one igniter.
Marking and Labeling Requirements:
See Table 2
Placarding 1: EXPLOSIVE 1.4
Authorized Modes of Transportation:
Highway, rail, vessel, passenger air
Segregation Requirements (highway, only) 2
Explosives of Compatibility group S3 may be loaded on the same vehicle with explosives of Compatibility groups B, C, D, E, F, G4, H, J, K, N, and/or S . See Notes.
Explosives of Compatilitiy group S may not be loaded on the same vehicle with explosives of Compatibility groups A and/or L.
Federal Insurance Requirements 5:
Security Plan Requirements 6:
Placardable quantities only
Routing Requirements 7: Placardable quantities only
Other Requirements: None
1 49 CFR 172.500 – 172.560 2 49 CFR 177.848, for other modes consult ICAO/IATA DGR or IMO IMDG Code 3 See 49 CFR 177.835(g) when transporting detonators 4 When transporting explosives of C, D, and/or E with G, explosive substances may not be on the same vehicle 5 49 CFR 387.1 – 387.17 6 49 CFR 172.800 – 172.822 7 49 CFR 397.61 – 397.77
3rd Revision adds drawing number to product description (authorized BKNO3 as component in Types A and C)
DOT has issued a 3rd Revision to EX2008120360. In this revision, a reference to the applicable drawing number and revision level has been added to the family description provided in th PRODUCT DESCRIPTION/PART NUMBER section of the EX document. This revision affects future products added to this family and does not change the classification previously assigned to members of the OOT-APRV-055 Igniter Family.
Table 1 provides approval specifics and Table 2, marking and labeling instructions.
Table 1: Approval Specifics -- OOT-APRV-055 Igniter Family
Products Approved: Type A (power charge igniters) Type B (core load igniters) Type C (power charge igniters) Type D (swing jet release) As depicted on drawing OOT-APRV-055A, Rev.2
EX-Number: EX2008120360, 3rd Revision
ID Number: UN0454
Proper Shipping Name: Igniters
Division and Compatibility Group:
1.4S
Limitations: Applies to igniters matching configuration and content presented on drawing OOT-APRV-055A, Rev.2
Outer: UN 4G fiberboard box, each containing not more than fifty (50) inner packagings uniformly segregated from one another and the box sidewalls by not less that three layers of corrugated fiberboard divider pieces and with top and bottom fiberboard pads.
Inner: Boxes, chipboard, each containing one igniter.
Marking and Labeling Requirements:
See Table 2
Placarding 1: EXPLOSIVE 1.4
Authorized Modes of Transportation:
Highway, rail, vessel, passsenger air
Segregation Requirements (highway, only) 2
Explosives of Compatibility group S3 may be loaded on the same vehicle with explosives of Compatibility groups B, C, D, E, F, G4, H, J, K, N, and/or S . See Notes.
Explosives of Compatilitiy group S may not be loaded on the same vehicle with explosives of Compatibility groups A and/or L.
Federal Insurance Requirements 5:
Security Plan Requirements 6:
Placardable quantities only
Routing Requirements 7: Placardable quantities only
Other Requirements: None
1 49 CFR 172.500 – 172.560 2 49 CFR 177.848, for other modes consult ICAO/IATA DGR or IMO IMDG Code 3 See 49 CFR 177.835(g) when transporting detonators 4 When transporting explosives of C, D, and/or E with G, explosive substances may not be on the same vehicle 5 49 CFR 387.1 – 387.17 6 49 CFR 172.800 – 172.822 7 49 CFR 397.61 – 397.77
DOT has added Type D (Swing Jet Release) to the OOT-APRV-055 Igniter Family manufactured and distributed by Owen Oil Tools LP. Table 1 provides approval specifics and Table 2, marking and labeling instructions.
Table 1: Approval Specifics -- OOT-APRV-055 Igniter Family
Products Approved: Type A (power charge igniters) Type B (core load igniters) Type C (power charge igniters) Type D (swing jet release) As depicted on drawing OOT-APRV-055A, Rev.1
EX-Number: EX2008120360, 2nd Revision
ID Number: UN0454
Proper Shipping Name: Igniters
Division and Compatibility Group:
1.4S
Limitations: Applies to igniters matching configuration and content presented on drawing OOT-APRV-055A, Rev.1
Outer: UN 4G fiberboard box, each containing not more than fifty (50) inner packagings uniformly segregated from one another and the box sidewalls by not less that three layers of corrugated fiberboard divider pieces and with top and bottom fiberboard pads.
Inner: Boxes, chipboard, each containing one igniter.
Marking and Labeling Requirements:
See Table 2
Placarding 1: EXPLOSIVE 1.4
Authorized Modes of Transportation:
Highway, rail, vessel, passsenger air
Segregation Requirements (highway, only) 2
Explosives of Compatibility group S3 may be loaded on the same vehicle with explosives of Compatibility groups B, C, D, E, F, G4, H, J, K, N, and/or S . See Notes.
Explosives of Compatilitiy group S may not be loaded on the same vehicle with explosives of Compatibility groups A and/or L.
Federal Insurance Requirements 5:
Security Plan Requirements 6:
Placardable quantities only
Routing Requirements 7: Placardable quantities only
Other Requirements: None
1 49 CFR 172.500 – 172.560 2 49 CFR 177.848, for other modes consult ICAO/IATA DGR or IMO IMDG Code 3 See 49 CFR 177.835(g) when transporting detonators 4 When transporting explosives of C, D, and/or E with G, explosive substances may not be on the same vehicle 5 49 CFR 387.1 – 387.17 6 49 CFR 172.800 – 172.822 7 49 CFR 397.61 – 397.77
DOT has approved the OOT-APRV-055 Igniter Family manufactured and distributed by Owen Oil Tools LP. Table 1 provides approval specifics and Table 2, marking and labeling instructions.
Table 1: Approval Specifics -- OOT-APRV-055 Igniter Family
Products Approved: Type A (power charge igniters) Type B (core load igniters) Type C (power charge igniters) As depicted on drawing OOT-APRV-055A
EX-Number: EX2008120360
ID Number: UN0454
Proper Shipping Name: Igniters
Division and Compatibility Group:
1.4S
Limitations: Applies to igniters matching configuration and content presented on drawing OOT-APRV-055A
Outer: UN 4G fiberboard box, each containing not more than fifty (50) inner packagings uniformly segregated from one another and the box sidewalls by not less that three layers of corrugated fiberboard divider pieces and with top and bottom fiberboard pads.
Inner: Boxes, chipboard, each containing one igniter.
Marking and Labeling Requirements:
See Table 2
Other Requirements: N/A
Notes: NA
Table 2: Marking and Labeling Summary (UN0454 /1.4S Products)
Device Carton/Container Inner Packing (Tray/Bag)
Outer Package
EXPLOSIVE - EXPLOSIF - DANGER - DÉTONATEUR - BLASTING CAP