Failsafe positions are set during binding. In the unlikely event that the radio link is lost during use, the receiver will hold the steering at the last command with no throttle. If the receiver is powered on before powering on the transmitter, the receiver will enter failsafe mode. When the transmitter is powered on, normal control is resumed. BINDING FAILSAFE Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier) code of a single specific transmitter. 1. Power off the transmitter and ESC. 2. Connect a fully charged battery pack to the ESC. 3. Press and hold the bind button on Receiver while powering up the ESC. After 2 seconds the receiver will be in bind mode. 4. Release the bind button and power on transmitter. 5. Binding is complete when the light stops blinking on receiver . You must rebind when binding the receiver to a different transmitter. NOTICE: Do not attempt to bind the transmitter and receiver if there are other compatible transmitters in bind mode within 400 feet. Doing so may result in unexpected binding. 1/14 MINI RALLY 4WD RTR–LOS01008 49399 800-0522 CONTROL TEST Perform a control test with the vehicle wheels off the ground. If the wheels rotate after the vehicle is powered ON, adjust the TH Trim knob until they stop. To make the wheels move forward, pull the trigger. To reverse them, wait for the wheels to stop, then push the trigger. When moving forward, the wheels should maintain a straight line without any steering wheel input. If not, adjust the ST Trim knob, so the wheels maintain a straight line without having to turn the steering wheel. DRIVING PRECAUTIONS • Maintain sight of the vehicle at all times. • Inspect the vehicle for loose wheel hardware. • Inspect the steering assembly for any loose hardware. Driving the vehicle off- road can cause fasteners to loosen over time. • Do not drive the vehicle in tall grass. Doing so can damage the vehicle or electronics. • Stop driving the vehicle when you notice a lack of power. Driving the vehicle when the battery is discharged can cause the receiver to power off. You may lose control of the vehicle. • Do not apply the throttle in forward or reverse if the vehicle is stuck. Applying throttle in this instance can damage the motor or ESC. • After driving the vehicle, allow the electronics to cool to ambient temperature before using the next battery pack. Exploded View/Explosionszeichnung/Vue éclatée/Vista Esplosa Parts Listings/Teileliste/Liste des pièces/Elenco componenti 1 LOSI 1/14 MINI RALLY 4WD RTR • INSTRUCTION MANUAL
9
Embed
Exploded View/Explosionszeichnung/Vue éclatée/Vista ... · 1/14 MINI RALLY 4WD RTR–LOS01008 49399 800-0522 CONTROL TEST Perform a control test with the vehicle wheels off the
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Failsafe positions are set during binding. In the unlikely event that the radio link is lost during use, the receiver will hold the steering at the last command with no throttle. If the receiver is powered on before powering on the transmitter, the receiver will enter failsafe mode. When the transmitter is powered on, normal control is resumed.
BINDING FAILSAFEBinding is the process of programming the receiver to recognize the GUID (Globally Unique Identifi er) code of a single specifi c transmitter.
1. Power off the transmitter and ESC.
2. Connect a fully charged battery pack to the ESC.
3. Press and hold the bind button on Receiver while powering up the ESC. After 2 seconds the receiver will be in bind mode.
4. Release the bind button and power on transmitter.
5. Binding is complete when the light stops blinking on receiver .
You must rebind when binding the receiver to a different transmitter.
NOTICE: Do not attempt to bind the transmitter and receiver if there are other compatible transmitters in bind mode within 400 feet. Doing so may result in unexpected binding.
1/14 MINI RALLY 4WD RTR–LOS01008
49399 800-0522
CONTROL TESTPerform a control test with the vehicle wheels off the ground. If the wheels rotate after the vehicle is powered ON, adjust the TH Trim knob until they stop. To make the wheels move forward, pull the trigger. To reverse them, wait for the wheels to stop, then push the trigger. When moving forward, the wheels should maintain a straight line without any steering wheel input. If not, adjust the ST Trim knob, so the wheels maintain a straight line without having to turn the steering wheel.
DRIVING PRECAUTIONS• Maintain sight of the vehicle at all times.
• Inspect the vehicle for loose wheel hardware.
• Inspect the steering assembly for any loose hardware. Driving the vehicle off-road can cause fasteners to loosen over time.
• Do not drive the vehicle in tall grass. Doing so can damage the vehicle or electronics.
• Stop driving the vehicle when you notice a lack of power. Driving the vehicle when the battery is discharged can cause the receiver to power off. You may lose control of the vehicle.
• Do not apply the throttle in forward or reverse if the vehicle is stuck. Applying throttle in this instance can damage the motor or ESC.
• After driving the vehicle, allow the electronics to cool to ambient temperature before using the next battery pack.
Exploded View/Explosionszeichnung/Vue éclatée/Vista EsplosaParts Listings/Teileliste/Liste des pièces/Elenco componenti
1LOSI 1/14 MINI RALLY 4WD RTR • INSTRUCTION MANUAL
EXPLODED VIEW
CHASSIS
VTR211006
DYNS1425
VTR216002
VTR212004
VTR212008
VTR211007
ECX13003
VTR211104
VTR215000
VTR215000
VTR215000
VTR41000
VTR215000
VTR215000
VTR210005
VTR210005
VTR210006
VTR210005
VTR210005
2 LOSI 1/14 MINI RALLY 4WD RTR • INSTRUCTION MANUAL
CHASSIS
STEERING
VTR212012
VTR211002VTR216002
VTR211000
SPMS500
VTR215000
VTR215000
DYN4830
VTR212004
VTR211104
VTR211001
VTR211005
VTR215000
VTR215000
VTR216000
VTR215000
VTR211103
VTR211006
VTR215000
VTR215000
VTR211103
VTR211005
VTR217000
VTR211103
VTR214006
VTR214005
VTR217000
VTR211005
VTR215000
45.7mm
3LOSI 1/14 MINI RALLY 4WD RTR • INSTRUCTION MANUAL
VTR213008
VTR216000
VTR211007
VTR212003
VTR217000VTR212008
VTR212011
VTR212000
VTR215000
VTR215000
VTR215000
VTR214006
VTR214000
VTR215000
VTR215000
VTR212000
VTR215000
VTR215000
FRONT SUSPENSION/VORDERE AUFHÄNGUNG
VTR216000VTR214002
VTR212007VTR214004
VTR212001
VTR214008
VTR217000
VTR215000
VTR212009
VTR214003
VTR216001
VTR216000
VTR214002
VTR217000VTR212001
VTR214008
VTR215000
VTR214008
VTR215000
VTR214004
4 LOSI 1/14 MINI RALLY 4WD RTR • INSTRUCTION MANUAL
VTR211006
VTR213008
VTR215000
VTR214006
VTR216000VTR211008
VTR215000
VTR214001
VTR211008
VTR215000
VTR215000
VTR215000
VTR212000
VTR212000
REAR SUSPENSION
VTR214004
VTR212007
VTR212009
VTR217000VTR216000
VTR214002
VTR212001
VTR215000
VTR214003VTR216001
VTR217000
VTR212001
VTR215000VTR214004
VTR216000
5LOSI 1/14 MINI RALLY 4WD RTR • INSTRUCTION MANUAL
65.3mm
VTR213000
VTR213007
VTR213000
VTR213000
VTR213008
VTR214007
VTR213003
VTR213007
VTR213007
VTR213002
VTR213008
VTR213005
68.8mm
VTR214007
VTR213001
VTR213001
VTR213001
VTR213007
VTR213007
VTR213004
VTR213002
VTR213008
VTR213006
VTR213000
FRONT SHOCK
REAR SHOCK
6 LOSI 1/14 MINI RALLY 4WD RTR • INSTRUCTION MANUAL
VTR217000
VTR212003
VTR212003
VTR212010
VTR215000
VTR215000
VTR215000
VTR212003
VTR217000
VTR212010
VTR212005
VTR212006
VTR212006
VTR215000VTR212003
VTR212008
VTR217000
VTR212002
VTR212011
VTR215000
VTR212005
VTR217000
VTR217000
VTR212005
DIFFERENTIAL
VTR41000
7LOSI 1/14 MINI RALLY 4WD RTR • INSTRUCTION MANUAL
Parts Listings
Part # English
VTR210005 Wing & Mirror Set: Kemora, Kalahari
VTR211000 Main Chassis: Kemora, Kalahari
VTR211001 Nerf Guard Set: Kemora, Kalahari
VTR211002 Battery Hold Down: Kemora, Kalahari
VTR211005 Steering Hardware Set: Kemora, Kalahari
VTR211006 Body Post (4): Kemora, Kalahari
VTR211007 Front Bumper Set: Kemora
VTR211008 Rear Bumper Set: Kemora
VTR211103 Servo Saver, Mount and Bellcrank Set: Kemora, Kalahari
VTR211104 Upper Deck and Support Set: Kemora, Kalahari