Sales • Service • Rental PREST STD U.S. POSTAGE PAID Permit No. 5584 St. Louis, MO Nu Way always appreciates your business and occasionally we make mistakes and errors/omissions. In the event of this they will be posted in our stores and on our website. 5 Locations St. Louis 4190 Hoffmeister Avenue • St. Louis, MO 63125 314-544-1214 800-542-1214 Fax 314-544-1656 Jefferson City 3100 South Ten Mile Dr. • Jefferson City, MO 65109 573-893-8786 800-345-9154 Fax 573-893-8737 Jackson 4788 Old Cape Road East • Jackson MO 63755 573-204-0100 800-599-9854 Fax 573-204-0411 Wentzville 115 Resource Drive • Wentzville, MO 63385 636-327-8877 888-999-6883 Fax 636-327-4944 Troy 7651 East Resource Drive • Troy, Illinois 62294 618-288-3400 888-315-1100 Fax 618-288-3410 Hours Monday Thru Friday 7 AM - 5 PM Saturday 8 AM - 12 PM Volume 34 Prices Subject To Change Without Notice Table of Contents Site Layout Tools 2 - 4 Flatwork Supplies 5 - 10 Masonry Supplies 10 - 11 Foundation Supplies 12 - 14 Waterproofing Supplies 15 Caulks & Adhesives 16 Chemicals & Grouts 16 - 18 Work Wear 19 Job Site Security 20 Safety Supplies 20 - 23 Rental Rate Sheet Insert Job Site Supplies 23 - 24 Carpentry Tools 25 - 26 Hand Tools & Equipment 27 - 28 Fastening Tools 29 - 30 Iron Workers Tools 30 Power Tools & Equipment 31 - 38 Drywall Tools 39 Landscaping Tools 40 Vehicle Outfitting & Jobsite Storage 41 - 42 Ladders & Scaffolding 43 Winter Items 44 nuwayinc.com Experience The Advantage CHECK AUTHORIZATION BY Return Address Nu Way 4190 Hoffmeister Ave. St. Louis, MO 63125 Jobsite Safety Tool and Equipment Rental Paving and Flatwork Supplies Commercial Construction Residential Construction Hand and Power Tools Pgs. 27-38 Pgs. 25-26 Insert Pgs. 30-38 Pgs. 5-10 Pgs. 20-23
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Sales • Service • Rental
PREST STD
U.S. POSTAGE
PAID
Permit No. 5584
St. Louis, MO
Nu Way always appreciates your business and occasionally we make mistakes and errors/omissions. In the event of this they will be posted in our stores and on our website.
5 LocationsSt. Louis
4190 Hoff meister Avenue • St. Louis, MO 63125 314-544-1214
800-542-1214 Fax 314-544-1656
Jeff erson City3100 South Ten Mile Dr. • Jeff erson City, MO 65109
573-893-8786
800-345-9154 Fax 573-893-8737
Jackson4788 Old Cape Road East • Jackson MO 63755
573-204-0100
800-599-9854 Fax 573-204-0411
Wentzville115 Resource Drive • Wentzville, MO 63385
636-327-8877
888-999-6883 Fax 636-327-4944
Troy7651 East Resource Drive • Troy, Illinois 62294
618-288-3400
888-315-1100 Fax 618-288-3410
HoursMonday Thru Friday 7 AM - 5 PM
Saturday 8 AM - 12 PM
Volume 34
Prices Subject To Change Without Notice
Table of ContentsSite Layout Tools 2 - 4
Flatwork Supplies 5 - 10
Masonry Supplies 10 - 11
Foundation Supplies 12 - 14
Waterproofing Supplies 15
Caulks & Adhesives 16
Chemicals & Grouts 16 - 18
Work Wear 19
Job Site Security 20
Safety Supplies 20 - 23
Rental Rate Sheet Insert
Job Site Supplies 23 - 24
Carpentry Tools 25 - 26
Hand Tools & Equipment 27 - 28
Fastening Tools 29 - 30
Iron Workers Tools 30
Power Tools & Equipment 31 - 38
Drywall Tools 39
Landscaping Tools 40
Vehicle Outfi tting & Jobsite Storage 41 - 42
Ladders & Scaff olding 43
Winter Items 44
nuwayinc.com
Experience The
Advantage
CHECKAUTHORIZATION BY
Return Address
Nu Way4190 Hoffmeister Ave.St. Louis, MO 63125
Jobsite Safety
Tool and Equipment Rental
Paving and Flatwork Supplies
Commercial Construction Residential Construction
Hand and Power Tools
Pgs. 27-38
Pgs. 25-26
Insert
Pgs. 30-38
Pgs. 5-10Pgs. 20-23
2 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
SITE LAYOUT TOOLS
Self-Leveling Cross Line Lasers
$18555GLL2-40 Up to 30 ft.
• Easy to use one button operation• Self-leveling up to 4”• Highly visible lasers
• Easy to use one button operation• Self-leveling up to 4”• Up to 65 ft. range
• Plumb and Level Point Projection• Integrated Reference Lines• Up to ±1/4-in @ 100-ft• Self-Leveling, Up to 5°
Inverted Tip Solvent Based Marking Paint
Stripe Water Based Traffic Marker
As Low As
$2$29595When You Buy 72 Or More 20958 20 Fluid Ounces
As Low As
$7$75050When You Buy 72 Or More 20649 Dark Handicap Blue
• Solvent based and VOC compliant• High solids for greater coverage• Available in red/orange• Water based formula available in red, pink, black, green,
blue, white, clear and safety purple
• Water Based and VOC compliant• Traffi c ready in 60 minutes• One can will stripe 250 linear feet
20782 White traffi c “extra” marker for aspahlt striping $10.2520786 Yellow traffi c “extra”marker for aspahlt striping $10.25Z605 Stripe marking gun $31.75Z606 33” Stripe marking wand $34.50Z604 Stripe marking machine $140.00
7” Aluminum Rapid Square
$810RS-45
• Useful for angles and layout• Easy to read graduations• Made in USA
Magnetic Extruded Aluminum Level
• Top reading level• Full length magnetic strip to hold level in place• Shock absorbing black end caps
PML-24 24” Magnetic extruded aluminum level $25.00PML-48 48” Magnetic extruded aluminum level $31.50
BT300HD Heavy-Duty Aluminum Adjustable Tripod - 110” $179.00BP350 Telescoping Pole System for Laser Tools $142.50
Professional Cast Aluminum Level
• Durable cast aluminum construction• Solid set double bent vials• Made in USA
• Marked both sides, both edges• Graduated to 1/16ths both edges• 16” stud centers marked in red
• Graduated in feet, 1/10ths and 1/100ths of feet• Regular outisde markings in feet, inches, and 1/16ths• Decimal points on engineer’s scale prevent reading errors
• Graduated vertical inches to 1/16ths, both edges• Brick mason’s scale on inside, red course counters numbered
consecutively• Regular outside markings in black
L100 3/8” X 100’ hi-viz® orange long steel tape $21.00FE100 1/2” X 100’ hi-viz® fi berglass tape $16.5045068 3/8” X 50’ hi-viz universal long steel tape $14.25
6’ X 5/8” Wood Rule Red End®
6’ Red End Engineer’s Ruler
$18251066D
6’ Red End Brick Mason’s Ruler
$1725L636
• Graduated to 1/16ths of an inch• 16” stud centers in red, regular outside markings• Marked both sides and both edges
6’ Red End With 6” Slide Rule Extension
$1850X46
• Ny-Clad® blade coating extends blade life• Non-slip toggle lock• Compact size for comfort and easy storage
1” X 30’ Pro Series 3000 Power Return Tape
$1600PS3430
Transits And Levels
$16500 58-MP3
• 1/4” accuracy at 100’, 200’ working range• Dust protected eyepiece with fi xed cross hairs• Includes: tripod, rod, case and allen wrench
• Double banded legs for added stability• Positive locking clamps• Powder painted wear-resistant metal parts and
shoulder strap
5/8 X 11 Aluminum Wide Frame Adjustable Tripod
$1190060-ALW20
Tripods
60ALQC40 5/8” X 11 dome head aluminum ext. Tripod $119.0060-ALQC21 1/2 X 20 ext. Leg alum. Tripod w/quick clamp $129.0060WDW20HV 5/8 X 11 wood/fi berglass tripod with fl at head $185.0060-ALQCI120-BPL 5/8” - 11 Ext. Leg Aluminum Tripod -Best Value $75.50
Accessories
11-498 8 Ounce brass plumb bob $22.2511-550 12 Ounce brass plumb bob $24.2511-552 16 Ounce brass plumb bob $26.5011-553 18 Ounce brass plumb bob $29.2011-554 24 Ounce brass plumb bob $36.7511-554A 32 Ounce brass plumb bob $37.0011-555B Brass plumb bob point $3.5011-729 12’ Gammon reel with power return $18.5011-431 Plastic plumb bob target $1.85
Levels Available In
Lengths From
24” To 96”
Lath Stakes
Pine And Hardwood Lath Stakes Available In Sizes 24”, 36” And 48”
Quantity Breaks Available
• 1/4” accuracy at 75’, 200’ working range • Dust protected eyepiece with fi xed cross hairs for
accuracy• Includes: Tripod, rod, case, and allen wrench
• Aligning 90˚ angles• Point transfer• Leveling work• High accuracy with clearly visbile laser points
20X Level Kit
$33900 54-190K
55
• Ny-Clad® • Non-slip t• Compact
1300024 24” Pine wood lath stakes - 100 per bundle $23.951300024H 24” Hardwood wood lath stakes - 30 per bundle $24.001300036 36” Pine wood lath stakes - 50 per bundle $27.001300036H 36” Hardwood wood lath stakes - 30 per bundle $32.501300048 48” Pine wood lath stakes - 50 per bundle $24.501300048H 48” Hardwood wood lath stakes - 30 per bundle $40.95
g Laser
$35000 GCL25
$72555 DTECT150
• 5-point, horizontal line, vertical line or cross-line modes
• Cross-Line +/- 1/8” at 30ft, Point +/- 1/4” at 30ft
• Self-Leveling, Up to 4°• Manual mode - Locks lines for use at any
angle
• Detects ferrous and non-ferrous metals, wood, live wiring and water-fi lled plastic pipes.
• 7 Detection Modes to include concrete, wet concrete, deep concrete, in-fl oor heating, drywall, metal and signal view
• LCD display shows detection depth, material type and the center and edges of an object.
5-Point Self-Leveling Alignment Laser
Wall/Floor Scanner with UWB Radar Technology
or
/4”
any
3St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
SITE LAYOUT TOOLS
Masons Twine
$42514902161 #18 X 250’
• Braided nylon mason line• Colors available
• Extra long 130 ft heavy duty cord and pull ring• Holds 1 lb. of chalk for less refi lls
14900089 #18 X 275’ white twisted nylon $2.5014902162 #18 X 545’ white twisted nylon $4.50149134144 #18 X 1000’ orange braided $17.75
$4075 G130
• Formulated to achieve a perfect line every time• Brilliant color oxides added to assure constant color
tones for strong sharp lines• Available in blue, red, white, and yellow
$150 8B 8 OZ. BLUE
OTRS18300 300’ Fiberglass tape with 3X high speed rewind $48.00OTR10100 100’ Ultra-glass premium fi berglass tape $24.99OTR1810100 100’ Ultra-glass premium fi berglass tape $27.50OTR1810200 200’ Ultra-glass premium fi berglass tape $59.00OTR1810300 300’ Ultra-glass premium fi berglass tape $75.00
Chalk Line Reels
G100 100’ Little giant chalk line reel $20.75P100 100’ Pro line chalk line reel $8.75
• Brilliant weather-proof color.• Water-resistant lines hold your mark.• 12–15 strikes usual line yield.
$2025103BD 3 LB.
Ultimate
Blue
Chalk/Dye
Marking Chalk
105B 5 Lb. Blue ultra fi ne marking chalk $9.008GO 8 Oz. Ultra fi ne marking chalk $2.50105GO 5 Lb. Glo-orange ultra fi ne chalk $14.255BD 5 Oz. Ultimate blue chalk/dye $3.75105R 5 Lb. Red ultra fi ne marking chalk $9.00
• Graduations are 1/8ths, inches, and feet• Tough ABS reel• Designed for the do-it-yourselfer
200’ Fiberglass Tape Measure
$3600 OTRS18200
Telescoping Fiberglass Leveling Rods
$16900 90343 16’ tenths SVR Surveyor’s Series
• Sections retract for compactness• Universal tip fi tting for attaching accessories• Carrying case
98010 25’ Tenths surveyor’s fi berglass leveling rod $215.0098020 25’ eighths fi berglass leveling rod $189.95920041 16’ Tenths (CR series) fi berglass siterod $110.00920042 16’ Eighths (CR series) fi berglass siterod $115.00
Tape Measures
$690043-747
• Clamps to (2x4) dimensional lumber for hands free leveling• 180 rotating vial to duplicate angles• Bridged center dial for continuous marking surface
Bostitch 48” Clamping Box Beam Level
33-428 7.5M/25’ x 1” Powerlock® tape rule $22.4533-835 35’ X 1” Powerlock® tape rule $22.55
$169533-692
• 9 ft. tape standout• 13% thicker blade• Cushion grip built into the case
16’ X 3/4” Maxsteel™ Tape Rule
$252534-130
• 4 to 1 gear drive for fast rewind• Stainless steel blade for long life• Tru-Zero end hook for inside and outside
measurements
100’ X 3/8” Fatmax™ Long Tape Rule
$1475 47-487L
• Rewinds 5x faster – has a 5:1 gear ratio• Die-cast aluminum housing• 4 oz. waterproof red FatMax® Xtreme™ chalk
Fatmax® Xtreme™ Chalk Reel With
Red Fatmax® Xtreme™ Chalk Kit
$875 42-465
• Durable heavy-duty cast aluminum frame• Ideal for pipe and conduit work• Magnetic strip allows hands-free operation on metal
surfaces
9” Torpedo Level
$277545-013
• 90° and 45° angles for versatility of job applications• For use in tiling fl oors and patios, cabinetry and general
layout• Easy to fold and store
Folding Layout Square
• 100’ Polyester line rewinds 3-1/2 times faster• Free wheeling disengage gear for ease of use• Quick fi ll rubber grommet
$725 GB1
Chalk Reels
MeasuringWheels
$105047-099
• Durable, heavy-duty die cast body for extra long life• Long wearing felt gasket hugs line and distributes uniform chalk
coating• Can be used as plumb bob
100’ Die Cast Chalk Line Reel
$305533-735
• 11’ tape standout• 1-1/4” wide blade for easy readability• BladeArmor™ coating on the fi rst 6”
maximizes durability of hook end
35’ X 1-1/4” Fatmax™ Tape Rule
$595 64110
$19000 68900
$11000 68920
• Case is constructed of durable aluminum alloy• Steel plated hook and large grip anchor ring• Holds approximately 2 oz. of chalk
• Measures to 9999 feet• Measures in Ft/10ths • Piston grip mounted counter controls
• Measures to 9999 feet• Measures in Ft/10ths • Tri-Fold handle with pistol grip
100’ Metal Case Chalk Reel
DW-PRO 12.5” Measuring Wheel With Carry Case
DW-500 6” Measuring Wheel
$925 64310
• Retrieves chalk line 3-1/2 times faster than a standard chalk reel
• Lightweight ABS impact-resistant case• Holds approximately 2 oz. of chalk
100’ Fast Retrieve Chalk Reel
$3575 2031311• Large capacity reservoir holds 14 oz of chalk• Steel crank, durable to last longer, handle locks to
• The strongest housing (stainless steel!) on the market• Metal-reinforced crank handle for durability• Housing reinforced with rivets for superior strength
300’ Perma Clad Nylon-Coated Steel Long Tape
$17999 SNR18300
Long Tapes
RR182 Dual wheel, 1 ft. circumference., 9,999 Ft limit $46.75MP301 3 Ft. circumference., 99,999 Ft limit - best seller $101.25
$1955 33-530
• 8’ standout• BladeArmor™ coating on the fi rst 6”• Entire blade coated with Mylar® polyester fi lm• 10% smaller than PowerLock® Classic Tapes
30’ Powerlock® Tape Rule With Blade Armor™ Coating
o
bilittttttttt
Reel
s fastere of use
8 standout• BladeArmor™ c• Entire blade co• 10% smaller t
™ Chalk Kit
d distributes uniform cm halk
icationsand general
Square
orkfree operation on metal
Soapstone,
Markers and
Lumber Crayons
Measuring Wheels
$7175 RRT6
• Units: feet and inches• Compact fold-down — easily reduces to 1/2 its size• 5-digit, easy-read, magnifi ed counter that measures 9,999 feet
$9250 RRT12• Units: feet and inches• Compact fold-down — easily reduces to 1/2 its size• 5-digit, easy-read, magnifi ed counter that measures
9,999 feet
$16000 MP401
• 5-digit counter. Up to 99,999 feet.• Rugged 3/4” steel tubing • Compact fold-down—easily reduces to 1/2 its size for
storage and portability.
4 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
Tech/Electronic IP65 Level With Case
$2725036524 24”
• 5 mode reading (degrees in 1 or 2 decimal points, percent, feet & inches in decimal, feet and inches in fractions, and mm/m
• 2 screen visibility with no loss of frame strength
$3050036548 48”
SITE LAYOUT TOOLS
22” Machete
$1750 21-100• 22” long polished blade with a 5” long plastic handle • Blade can take a razor sharp edge. • A multiple use tool for weed growth, cleaning and cutting brush, vines
and shrubs
Leather Sheath For 22” Machete
$2625 21-101
Flagging
150000 1-3/16” X 100 yd black $1.55150002 Red fl uorescent fl agging 1-3/16 x 50 yds. $1.65150003 Yellow fl agging 1-3/16 x 100 yds. $1.65150004 White fl agging 1-3/16 x 100 yds. $1.65150005 Green fl uorescent fl agging 1-3/16 x 50 yds. $1.65150006 Blue fl agging 1-3/16 x 100 yds. $1.65150007 Pink fl uorescent fl agging 1-3/16 x 50 yds. $1.65
6” Glo Orange Stake Whiskers
$.15 EACH15015900GOG
Surveyors Flags
150SFS21BL Blue 21” with 2-1/2” x 3” fl ag $9.50150SFS21FP Fluorescent pink 21” with 2-1/2” x 3” fl ag $9.50150SFS21FR Red 21” with 2-1/2” x 3” fl ag $9.50150SFS21GR Green 21” with 2-1/2” x 3” fl ag $9.50150SFS21WH White 21” with 2-1/2” x 3” fl ag $9.50150SFS21YL Yellow 21” with 2-1/2” x 3” fl ag $9.50
Price Per Bundle Of 100 Pcs.
Construction Lasers
$69500LL100-2
• Fully automatic self-leveling rotating laser• 1000 ft Diameter with 1/8” accuracy• 1 Year “knock-over” warranty
$89500 LL300-4
• Self-leveling rotating laser with manual slope mode• 1300 ft Diameter range with 3/32” accuracy• 5 Year “Knock-over” warranty!
Complete Laser “System” In A Case
Includes: Laser, receiver, tripod, grade rod...All in 1 Case!
Includes: Laser, HL450 receiver and case
Includes: Laser, HL700 receiver and case
Includes: Laser, CR600 machine/rod receiver and case
Medium Range, High Accuracy Laser
The Original and Still the Best Professional Laser
$139500 LL400-10
• 2600 ft Working range with </=1/16” accuracy• 5 Year “Knock-over” warranty!• Includes CR600 machine mountable receiver!!
“Longest Range” Laser Level with Slope Mode
$305000 UL633-24
$35900 5.2XL
$26555 LP50
$119500 DET-2
• Dual Grade, Horizontal, Vertical, Interior and Pipe Laying Laser• Total control for any application• Plane-Lok, Automatic Grade Match and Axis Alignment• Includes: Two HL750 Laserometers and a SF601 Spot Finder
Universal Laser - The most versatile laser ever!
5.2XL Point and Cross Line Laser
5 Beam Point and Line Laser
DET-2 Construction Theodolite
Carrying Cases Available
Construction Calculators
$59954225
• Material cost & quantity estimations• Concrete areas & volumes• Includes: User’s guide, protective case, and long
life battery
$6995 4065
• Works in and converts between all building dimensional formats
• Solves right angles, including rafters, rake-walls, slopes and square-ups
• Calculates footing volume, blocks, roof area
4080 Trig plus III calculator $79.955022 Armadillo gear calculator hard case $14.95
Concrete Calc
Construction Master Pro
$799544080
• Work in and convert between any building dimension• Roof, rafter and framing solutions• Two years laserguard use-and-abuse warranty
Desktop Construction Master Pro
$8495 6135
• 91 Built-in scales - 50 imperial/41 metric• Customize scales for plans that are reduced/enlarged• Perform instant linear, rectangular area and volume takeoff s
Scale Master II Digital Plan Measuring System
$4495 8025
• Convert more than 60 imperial & metric units• Easily calculate linear, area and volume measurements• Meets federal highway metrication requirements
Ultra Measure Master Metric Conversion Calculator
Sledge Hammers
Wood Handles11969 4 Lb. Hammer with 16” wood handle $11.501197400 6 Lb. Hammer with 30” wood handle $18.951197900 8 Lb. Hammer with 36” wood handle $19.751120300 10 Lb. Hammer with 36” wood handle $23.951121900 12 Lb. Hammer with 36” wood handle $27.501123400 16 Lb. Hammer with 36” wood handle $34.501124400 20 Lb. Hammer with 36” wood handle $41.25
Fiberglass Handles1197000 4 Lb. Hammer with 16” fi berpro handle $14.951197600 6 Lb. Hammer with 33.5” Fiberpro handle $21.251198800 8 Lb. Hammer with 33.5” Fiberpro handle $23.251199300 10 Lb. Hammer with 33.5” Fiberpro handle $26.501199600 12 Lb. Hammer with 34” fi berpro handle $30.501199800 16 Lb. Hammer with 34” fi berpro handle $37.50
LL300-2 Includes: HL450 Receiver, Rod Clamp, 2161 Tripod and GR152 Rod (15’) $995.00
• “Mistake Proof” compensated self-leveling system• 1600 ft. Working range with </=1/16” accuracy• 5 Year warranty!• Includes Patented HL700 “Digital Readout” receiver
As Low As
$125 EACHWhen You Buy 36 Or More 150001 Orange Fluorescent
As Low As
$800 EACHWhen You Buy 10 Or More 150SFS21FO Orange Fluorescent
$122900 LL500
$30500
de
se
y
• Can replace a level, square, plumb bob, chalk line and optical instrument.
• Automatic self-leveling• Combines 5 beam pointer and crossline laser• 2 Year exchange warranty
• Automatic self-leveling and plumb• Fast, one person 90° layout of rooms, walls, tile, carpet
squares and fi xtures• Dust, water and shock-resistant
• Horizontal & Vertical Compensation for highest level of accuracy
• Simple & Intuitive 6-button Keypad• NiMH and Alkaline Battery Packs included• Dual LCD with large characters• Programmable settings for the horizontal angle resolution,
90 degree angle beep, vertical degrees or %, and more.• 2” angular accuracy - accurate enough for any construction
job
e Laser
optical
Laser
Framing Levels And Plate Levels
48” Box Frame Level
$14225 37448
• Removable endcaps for scribing in corners• Rubber endcaps grip walls and do not leave marks• Crystal clear vials readable in any direction
Jamber Level Set
Digirod Rodless Grade Checking Tool
• Crystal clear vials readable in any direction• Inlcudes: 72” and 32” level• Level and plumb the jamb and
header at once• Automatic cut/fi ll calculations• Accuracy of 1/16”• Works with all brand rotating lasers $24400 37532
$69500 DR400
8
ber Level Set
5St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
FLAT WORK SUPPLIES
Gator Glide Hand Floats
White Cementand Marble Dust
48” BullFloat Kit
Rugasol S Surface Retarder
• Gator GlideTM Leveling Head• Light-Weight Bull Float Blade• (4) 6’(ft) Snap Button Poles• Heavy Duty Carrying Case
• Architectural quality appearance with original color and texture of the aggregate
• No danger of acid residue from strong washing compounds
• Easy to apply
GF10802 16” X 3” hand fl oat with square edge $26.25GF10805 16” X 4” hand fl oat with square edge $27.50GF10807 16” X 3” hand fl oat with round ends $30.25
Gator Glide Hand Edgers
GF10833 4” X 8” hand edger 1/4” radius $26.25GF10834 4” X 8” hand edger 3/8” radius $26.25GF10835 4” X 8” hand edger 1/2” radius $26.25
Gator Glide Hand Groovers
GF10815 4” X 8” hand groover 1/2” deep bit $24.00GF10816 4” X 8” hand groover 3/4” deep bit $24.00GF10817 4” X 8” hand groover 1” deep bit $24.00
Spee-D Channel Drains
Duraslop Trench Drain System
• Ideal for commercial and residential applications from patios to light vehicular traffi c areas
• Flanges on the bottom of the channel ease installation by providing a lip for anchoring
• Extruded channel may be cut to any length and solvent welds together like PVC pipe
400 4’ X 4” Gray channel drain, base only, no grate $28.25400-10 10’ X 4” Gray channel drain, base only, no grate $79.50
430 Pop-up drain emitter with 4” elbow and corrugated pipe adapter $23.25
2371 “Tee” for 4” channel drain w/gray grate $38.952381 90° Elbow for 4” channel drain w/ grate $31.25248 Connector for 4” channel drain, gray $4.95247 Closing end cap for 4” channel drain $5.00241 2’ X 4” Gray channel grate only $17.502404 24” X 24” PVC catch basin with 4 outlets $348.502410 12” Universal outlet adapter $33.002415 Galvanized steel grate for #2404 basin $645.50234 3” & 4” Bottom outlet/strainer $28.25
STEGMEIER CORPORATION
Poured In Place “Cantilever Forms”
• foam forms that attach to the tile on gunite pools and secured with double face tape and tie wires.
• Set up time is minimal (usually the morning of the pour) and they may be removed early while the concrete is still wet enough to “slick fi nish” with a foam profi le edging tool.
• The tie wires are positioned approximately 14” apart with 2” break back
Frontier Desert Deck, when mixed with white marble sand and white cement, and applied to freshly poured concrete produces a durable attractive finish that is ideal for pool decks, patios and other walkways.• Coverage: 1 unit = 250/300 square feet• 8 units per carton• Twelve colors plus white available. • Lite Sand Buff, Regular Sand Buff, Dark Sand Buff,
Dove Grey, and Lite Dove Grey in stock
Double wall bonded P.V.C. drain system which remains straighter while concrete is being poured. The .100 thousandths thick top cap is half-lapped and runs continuously across fittings and short sections of base to keep straight lines.
The snug fit top cap can easily be removed at cleaning time or be replaced when damaged due to ultraviolet sun rays.
Provides the necessary crack control, but not so deep as to interfere with steel placement. In addition to control, it adds a beautiful finished look.
It is cost effectively, durable, and easy to install. With the “T” member ears embedded in concrete, surface water seepage is kept from subsoil.
Deck Drain
Deck Joint
Frontier Desert Deck
13994W Type 1 white portland cement 94 lb. $25.50139100 Marble dust - white 100 lb. bag - pool mix $17.25
$27500 GF10305
$5975 91072 5 Gallon
HeadBlade
olesase
Cast-N-Place ADA Detectable Warning Panels
Surface Applied ADA Detectable Warning Panels
ACC-R-2436 2’ X 3’ replaceable red cast-n-place tactile panel $94.00ACC-R-2448 2’ X 4’ replaceable red cast-n-place tactile panel $125.00ACC-R-2460 2’ X 5’ replaceable red cast-n-place tactile panel $157.00
Quantity Discounts and Other Colors Available
ACC-S-2448 2’ X 4’ Surface applied red tactile panel $129.00ACC-S-2460 2’ X 5’ Surface applied red tactile panel $162.00TBS-010 Tactile Bond&seal For Surface Applied ADA Panels $8.25
Quantity Discounts and Other Colors Available
• Truncated dome size and spacing compliant with ADA Federal and State requirements
• Fully complies with all ADA and OHSA requirements for surface height transitions to eliminate trip hazards
• Installs in minutes during cement fi nishing stage• Tiles shipped with removable protective plastic fi lm to provide a clean
surface after installation
• Truncated dome size and spacing compliant with ADA Federal and State requirements
• Fully complies with all ADA and OHSA requirements for surface height transitions to eliminate trip hazards
• Engineered to successfully upgrade any existing surface to comply with Federally mandated detectable warning requirements.
• Adhesive location identifi ed on reverse side of tile for easy, error-free installation
Manufactured from HDPE, this
trench drain offers a durable
alternative to concrete channel
that will save time and reduce
cost at installation.
• Interlocking tongue and groove joints for secure alignment and easy installation
• Duraloc intergral joint lock to prevent joint movement• No extra screws or clamps needed at installation• Lightweight sections for easier handling and lowered freight costs• Blank grate inserts eliminate need for plywood• Sloped and Non-sloped sections with bottom outlets offers
system versatility• Various grate options, up to Class D traffic rating
Vapor Barrier And Vapor Retarder Wrap
13703300 14’ X 140’ 15mil vapor barrier for underslab $351.0013707160 14’ X 210’ class a 10mil vapor retarder for underslab $323.00149TAPE 4” X 180’ Stego tape $35.50
Quantity Discounts Available
Stego Wrap 15 Mil Class A• A true below-slab vapor barrier• A multi-layer plastic extrusion manufactured with only the highest grade
of prime, virgin, polyolefi n resins.• Can be used in systems for the control of soil gases (radon, methane), soil
poisons (oil by-products) and sulfates.
• Chemical coating applied to the surface of unset concrete to retard surface mortar
• It is used for improving the appearance of ornamental work, roadways, driveways, sidewalks, plaza areas and steps
Stego Wrap 10 Mil Class C• 10-mil is used as an exceptional vapor retarder• A multi-layer plastic extrusion manufactured with only the highest grade
of prime, virgin, polyolefi n resins.• Can be used in systems for the control of soil gases (radon, methane), soil
poisons (oil by-products) and sulfates.
$43 Per LF Average Cost
6” x 4’0” Sections
Surface Applied ADA De
• Truncated dodome sm ize and spacp ing co
tectable Warning Panelse
d d d
g
$6450 139TS5 5 Gallon
Control Set Surface Retarder
$3.80 Per LF Average Cost
$0.90 Per LF Average Cost
Gift CardGift CardBUILDING MATERIALS • CONSTRUCTION EQUIPMENT • CONCRETE SUPPLIES
CONTACT A NU WAY SALES TEAM MEMBER FOR GIFT CARD
SALES
6 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
Concrete Stamps
FM3125-B Ashlar cut slate $173.00FM100-B Rough cut ashlar $185.00FM700-B Random stone $208.00FM300 Cut stone - 12” x 12” tiles $194.00FM520 26” X 26” Edinburgh coble $265.00FM-650 26” X 46” European fan $220.00FM-E2S1N 24” X 24” Ultra Flex Slate Texture Skin $70.00
• 1-3/4” X 6’ aluminum snap handle• Fits bull fl oats, channel fl oats and
adjustable heads• Fits competitors heads and products
• Fits 1 3/8” and 1 3/4” push button handles• Universal mounting that fi ts any two or four
hole bull fl oat without adapter• Fits 1 3/8” and 1 3/4” push button handles
1.5” X 3.5” X 16’ Bumpcutter
2” X 4” X 10’ Highway Screed For Bumpcutter
QLT “Twister” Bull Float Bracket
702154 Male 1-3/4” x 6’ threaded handle connector $ 6.9514973 Outriggers and braces $46.50
701156 2” X 4” Highway Screed for bumpcutter $306.25701161 1-1/2” x 3-1/2” x 10’ Highway Screed for bumpcutter $214.7514786 2” X 4” X 10’ Aluminum screed with plastic ends $108.2514788 2” X 4” X 12’ Aluminum screed with plastic ends $126.2514790 2” X 4” X 16’ Aluminum screed with plastic ends $158.00
Snap Handle
As Low As
$1795 EACHWhen You Buy 6 Or More
700524
Snap Handle
Speed Dowel - Patented Concrete Doweling SystemSpeed Dowel is the slip dowel installation system preferred by engineers and contractors alike. Speed Dowel provides a highly eff ective method for constructing superior quality construction joints in concrete fl atwork. Additionally, Speed Dowel cuts the time and labor of conventional slip dowel installation in half.
Speed Plate - A Patented Plate Dowel SystemSPEED PLATE™ is the economically smart choice for fl at plate dowel applications in construction joints. SPEED PLATE™ provides load transfer across construction joints and accommodates lateral and axial movement at inception due to concrete shrinkage and diff erential slab movement. The patented design reduces the number of dowels typically required with slip dowel systems and off ers many benefi ts to owners and installers.
PSD09/#5TL #5-3/4” X 9” Speed dowel sleeve $1.40PSD/#5BX #5-3/4” Speed dowel base $.38PSD09/#7TX #7-1” X 9” Speed dowel sleeve $1.50
As Low As
$1.28 EACHWhen You Buy 25 Or More PSD09/#4TS #4-5/8” X 9” Speed Dowel Sleeves
As Low As
$.32 EACHWhen You Buy 25 Or More PSD/#4BX #4-5/8” Speed Dowel Bases
As Low As
$3.00 EACHWhen You Buy 100 Or More 171SP01 1/4” x 4” x 6”Includes Sleeve and plate
Tinte D’AcquaWater-Based
Concrete Stain
$65001 Gallon
Create Unique decorative cementitious surfaces with Tinté D’Acqua™ deep penetrating, water based stains. Tinté D’Acqua’s™ permanent coloring solutions add life and luster to new and existing concrete fl oors, patios, driveways and vertical surfaces.
LegacyDecorative Concrete Systems
7St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
FLAT WORK SUPPLIES
Aluminum Threaded Handle
CC224 1-3/4” X 4’ Magnesium handle $21.25CC670 1-1/4” X 6’ Aluminum handle $23.75CC294 EZY-Tilt II bull fl oat bracket chain style $59.50CC494 Broom bracket base only $3.85CC665 Fresno/broom bracket adapter $18.00
Finishing Brooms
• 3 Rows of black nylon bristles• Adapter included• Accepts standard broom threaded handles
CC177 36” Aluminum fi nish broom $64.95CC178 48” Aluminum fi nish broom $83.95CC189 60” Aluminum fi nish broom $111.25
Groovers
Stainless Steel Edgers
CC320 24” X 8”, double end 3/4” bit, 3/8” radius $89.50CC322 24” X 8”, double end 1” bit, 1/4” radius $89.50CC324 24” X 8”, double end 1-1/2” bit, 1/4” radius $89.50
CF304 6” X 4-1/2”, 3/4” bit, 5/8” wide groove $34.25CF319 6” X 6”, 3/8” bit, 5/8” wide groove $44.95CF408 6” X 4-1/2”, 5/8” bit, 5/8” wide groove $32.75CF374 8” X 4-1/2” , 1” deep bit, 1/2” wide groove $54.50CC278-01 8” X 8” Walking groover,3/8” wide, 1” deep bit $63.25CC275-01 8” X 4-1/2” Walking groover 1/2” wide, 1” bit $47.95
CF138 6” X 6” 3/8” R Cement edger with wood handle SS $8.50CF141 6” X 3” 1/4” R Curved end edger with wood handle SS $7.75CF146 6” X 4” 1/2” R Outside curb & sidewalk tool SS $8.25CF152 6” X 4” 3/4” R Inside curb & sidewalk tool SS $6.95CF149 6” X 8” Edger/groover $20.65CF154 10” X 4” Highway edger 1”R 1-1/4”L with wood handle SS $9.25CF166 8” X 4” 1/2” R Cement edger with wood handle SS $8.75
“The Performer” Wood Concrete Finishing Brooms
Aluminum Airplane Groovers
Bronze Groovers
Ski Boards
$9975 14800SS 28.5” X 8”
• Lightweight and durable stainless steel
• Closed cell rubber pad• Completely washable
1480015 28.5” X 8” Aluminum ski board $89.25
20” Aluminum Smooth Mover
2” X 2” Footing Keyway Groover
One Man Screeds With Handle
Concrete Chutes
Heavy Duty Hand Screeds
Chute Tool and Form Shovel
48” Aluminum Bull Float
$2550 CWT-9CT Chute Tool
$3120 1480012 Form Shovel
$7850 CWT24816TH
• Standard threaded handle bracket• 6 hole universal mounting bracket• Flared edge design reduces lap marks
$9900 CWT3KB• Rustproof and lightweight• Replaceable pads and handles• Completely washable
12” X 22” Aluminum Kneeboards
$4725 320MS36 36” WIDE
• 1” x 2” Rectangular tubing with welded end caps • 1-3/8” x 72” Hardwood handle • Great for leveling any fl at pour: basements,
sidewalks etc.
Made from our toughest alloy, these hand screeds all feature a FULL 1/8” wall thickness for superior strength and stiffness. Won’t dent like thin-walled ribbed screeds. Welded on end caps ensure your screed can’t fill with concrete.
$5445 320MS48 48” WIDE
As Low As
$1575 EACHWhen You Buy 6 Or More CC236 1-3/4” X 6
EACH
• Fits bull fl oat/fresno threaded brackets• Molded thread plugs in each end join
handles together
g
3 R f bl k l b i l2” X 2” Footing
over
$$$$4725320MS36 36”WID
Finishing Trowels
$3775 MX20 20” X 4”
• High carbon spring steel blade• Blade cross ground to better hold its proper shape• Straight wood handle
MXS20 20” X 4” with curved wood handle $37.50MXS56 12” X 3” with curved wood handle $28.00MX57 14” X 3” with straight wood handle $29.00MX64 14” X 4” with straight wood handle $29.25MX64D 14” X 4” with straight Durasoft handle $32.25MX66 16” X 4” with straight wood handle $32.25MC66 16” X 4” with straight wood handle $34.95PB62D 12” X 4” Perma Shape broken-in Durasoft handle $32.75PB64D 14” X 4” Perma Shape broken-in Durasoft handle $35.50PB66D 16” X 4” Perma Shape broken-in Durasoft handle $38.75PB81D 18” X 4” Perma Shape broken-in Durasoft handle $41.50
Magnesium Floats
$12650 B48 48” X 8”
• Lightweight, long wearing, and properly balanced to provide the fi nish you want
• Square ends
$2400 11 8” X 3”• High carbon steel blade• Xtralite aluminum alloy mounting• Curved handle
• Made from the highest grade spring steel• Curved DuraSoft® Handle• Made in the U.S.A.
Pool Trowels
SP14SD 14” X 4” pool trowel w/Durasoft handle $31.75SP16B 16” X 4½” blue steel Xtra-lite pool trowel $28.75SP16BD 16” X 4½” blue steel pool trowel with Durasoft handle $31.75SP815B 18” X 5” blue steel Xtra-lite pool trowel $31.25
$2450 143D 16” X 31⁄8”
• DuraSoft® Handle• Fully rounded ends that help prevent fl oat marks• Extruded from very hard, durable, lightweight magnesium
145M 16” X 3-1/8” magnesium fl oat $19.50145D 16” X 3-1/8” magnesium fl oat w/Durasoft handle $23.50145SH 16” X 3-1/8” magnesium fl oat w/foam handle $19.25146 20” X 3-1/8” magnesium fl oat $23.50146D 16” X 3-1/8” magnesium fl oat w/Durasoft handle $27.75
• Constructed of heavy gauge aluminum• Reinforced with cross braces and fl anged edges• Durable and lightweight
1710008 8’ Aluminum, fl ared end $287.501711200 12’ Aluminum, fl ared end $414.401711600 16’ Aluminum, fl ared end $494.001712000 20’ Aluminum, fl ared end $558.40
CWT-26HHS06 6’ x 1-1/2” x 3-1/2” Aluminum Screed $56.00CWT-26HHS08 8’ x 1-1/2” x 3-1/2” Aluminum Screed $72.00CWT-26HHS12 12’ x 1-1/2” x 3-1/2” Aluminum Screed $104.00
Made
In
USA
Concrete Chutesvy gauge aluminum
oss braces and fl anged edgesweight
Bracket
Included
Other SizesAvailable
$3650 CWT-8FKG
$2295 CWT120 20” X 4-1/2”
8 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
FLAT WORK SUPPLIES
Concrete Saws
$152500 968411301
• 6” max capacity (rig mounted)• 3 speeds, 500/1400/2900 for optimum cutting.• Smartstart™ reduces rpm by 50% when starting
EHSK2 Cordless hummer 2 screed Without drill motor
$1200.00
LB104 4’ Screed bar for power screed 3 x 5 $312.00LB110 10’ Screed bar for power screed 3 x 5 $485.00LB112 12’ Screed bar for power screed 3 x 5 $539.00LB114 14’ Screed bar for power screed 3 x 5 $600.00
Ultra Light Screed Bars
SWB5 Sidewalk buddy without drill motor $545.00PR570 Finish trowel for sidewalk buddy $85.00PR590 Edger for sidewalk buddy $85.00
Side Walk Buddy
Call For
Info
$26000OWC50
• Honda GX50 engine• 4’ to 24’ roller tubes sold separately
$255000 X150D• 4-1/2 HP Robin engine• A preset depth of cut• Three diff erent size guide wheels,
for 1/8”,1/4” and 1/2” saw joint
$235000 X150• 4-1/2 HP Robin engine• Depth of Cut: 1” to 1-3/16”• Light to medium duty use
6” “Decorative Concrete” Prowler Saw
The Prowler
Roller Screed Power Kit
9St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
FLATWORK SUPPLIES
CREEP12 Street Creep Expansion Joint 12’ length $385.00CREEP20 Street Creep Expansion Joint 20’ length $660.00
Streamlined Steel Forms
• Available in sizes from 4” to 18” or higher• Self aligning forms• Applications: Edge forms, footers, industrial slabs, foundations, curbs and
gutters, and fl atwork• Made In USA
The Only
Completely
Reinforced
Forms
Power Cutters
Rental Rates (K760 - Blade Not Included)
Daily Weekly Monthly
$50 $180 $425
• Suitable for: general concrete cutting, pile cutting, asphalt cutting and demolition work
• 14” blade capacity• 5” cutting depth• Blade sold separately
$119500 966477101
14” Power Cutter With Easy Start Engine
531101187 ELC45 14” diamond chain for K950 $756.80
542774541 14” X .125 X 1” HI5 all purpose diamond blade $387.00542750665 14” X .110 X 1” MS-5 combo masonry blade $242.50542751128 14” X .125 X 1” GH10 asphalt dry wet cutting blade $295.00
Call For Pricing 966037802
Concrete Chain Saw
• 6.5 HP motor• 14” bar length• 15” cutting depth• Chain sold separately
• New digital ignition system• 5” cutting depth• 5 hp engine• Blade sold separately
$93955 967181002
K760 II 14” Power Cutter
• 5 HP, 73 cc motor• Depth of cut per pass 2.5” with max cutting depth 16”• 9” twin blades• Includes: Blades
$150000 967195701
Cut-N-Break Concrete Saw
• This saw provides a new way to accurately and consistently produce factory-like bevels on SDR 26 and SDR 35 PVC pipe used for waste water lines.
• Suitable for: General concrete cutting, masonry work, and landscape work
• 14” blade capacity• 5” cutting depth• Blade sold separately
$78500 966799401
K3000 14” Electric Power Cutter w/ Wet Cutting Kit
Rental Rates (Blade Not Included)
Daily Weekly Monthly
$50 $175 $350
$296500 968424101
• 6.1 HP motor• 14” ring blade• 10” cutting capacity• Blade sold separately
Concrete Ring Saw
Rental Rates (Blade Not Included)
Daily Weekly Monthly
$200 $700 $1750
531108059 14” Cured ring blade ELR 45 series $398.00
576778501 9” Twin blades general purpose $389.30
Poly Forms
Approximately
60% Lighter Than
Steel Forms
Poly Forms869-420 4”X12’ Poly form w/end connections - fl exible $37.25869-450 4”X12’ Poly form w/end connections - straight $59.90869-620 6”X12’ Poly form w/end connections - fl exible $49.00869-650 6”X12’ Poly form - straight $68.70869-025 Metal slide pockets $8.75869-040 Metal twist pockets $7.50
Extra Flex Radius Forms869-630 6” X 10’ Plastic extra fl ex radius form $54.50869-430 4” X 10’ Plastic extra fl ex radius form $46.00869-170 Stake pockets w/lock knobs box of 10 $51.00869-180 End connections and hardware bag of 10 $15.00
Extra Flex
Radius Forms
• Breakthrough concrete forming system for shaping tight radiuses
• Outperforms & outlasts labor-intensive Masonite® or bender board
• Easy to set and strip
QuantityBreaks
Available
01209
cing
ork
1
Rubber Expansion
Joint
A seamless, extruded, EPDM (Ethylene Propylene Diene Monomer) rubber expansion joint. The rubber expansion joint is installed in new or existing concrete slabs including but not limited to roads, driveways, sidewalks and finished floors. The installation process requires limited tools and zero adhesives or sealants.
Protects adjoining structures and concrete slabs during extreme pressure caused by street creep. Maintains a seamless rubber seal while collapsing horizontally allowing approximately 3” of uncontrollable thermal expansion or slab movement. Provides vertical support and surface integrity while undergoing the 3” mechanical collapse.
Concrete Cutting And Grinding Wheels
24065 14” X 3/16” x 1” Concrete blade $20.0024061 14” X 3/16” x 1” Green concrete/asphalt blade $21.0024060 14” X 3/16” x 1” Concrete blade $16.5023463 14” X 1/8” x 1”/20mm(23464) Big Mac concrete blade $16.5023460 12” X 1/8” x 1”/20mm(23462) Big Mac concrete blade $8.2020087 7” X 1/4” x 5/8-11 T27 masonry concrete and stone $7.0020017 4” X 1/4” x 5/8 T27 masonry concrete and stone $3.25
Quantity Discounts Available
Made
In
USA
Ask about the “VH5” General Purpose Blade Only $49.55 Each for 6 or more
542774463
Ceramar Foam Expansion Joint• Provides an excellent joint fi ller and back-up material for use in either
horizontal or vertical applications• Compatible with all currently popular cold-applied sealants, caulks and
hot-pour joint sealing compounds.• It is lightweight and easy to cut or form in the fi eld without waste.
1381048120 1” X 48” x 120” foam expansion joint $123.001381055120 1” X 5-3/4” x 120” foam expansion joint $190.00/cf
Tiah® Curing And Sealing Compound• An acrylic polymer solution that dries to a transparent fi lm, which
improves abrasion resistance of the concrete.• Provides improved weather and stain resistance, combined with a
dustproof sealer.• Meets maximum VOC content limits of 700 g/L
040103 4” X 10’ 3 Pocket form 12 gauge $47.75060103 6” X 10’ 3 Pocket form 12 gauge $56.75080103 8” X 10’ 3 Pocket form 12 gauge $84.75040107 4” X 10’ 7 Pocket fl exform with 1 lock clamp $67.9506010 6” X 10’ 7 Pocket fl exform with 1 lock clamp $78.02080107 8” X 10’ 7 Pocket fl exform with 1 lock clamp $105.3704050FF 4” X 5’ Filler form - slip on $23.4006010CFB 6” X 10’ Curb face form “B” straight $62.6706010CFJ 6” X 10’ Curb face form “J” $62.6734018NS ¾” X 18” Nail stake $2.8534024NS ¾” X 24” Nail stake $3.7578018NS 7/8” X 18” Nail stake $4.1578024NS 7/8” X 24” Nail stake $5.1534018FP ¾” X 18” Form pin $3.00
4”, 6”, 8”, 10” And 12” Forms In Stock
Call For Rental Rates
10 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
MASONRY SUPPLIES
FLAT WORK SUPPLIES
400-0 ¼” X 4-7/8” cold chisel $4.00401-0 5⁄16” X 5¼” cold chisel $4.25405-0 ½” X 6-3/8” cold chisel $5.25406-0 5/8” X 6¾” cold chisel $5.65408-0 ¾” X 7-1/8” cold chisel $6.65413-0 7/8” X 7½” cold chisel $8.25417-0 1” X 7-7/8” cold chisel $10.10
Cold Chisel
441-0 ½” X 12” long cold chisel $7.50410-0 ¾” X 12” long cold chisel $9.35419-0 1” X 12” long cold chisel $12.90
Long Cold Chisel
Brick Set
434-0 2½” X 7” brick set $9.25435-0 3” X 7” brick set $10.00436-0 3½” X 7” brick set $10.70437-0 4” X 7” brick set $11.75439-0 5” X 7” brick set $14.75
Floor Chisel
471-0 2” X 10” floor chisel $12.70472-0 2½” X 10” floor chisel $14.15
• 1.2 HP motor• Max cutting depth 2.75”• Max cutting length 28.5”• Adjustable cutting head enables bevel cuts
between 22.5 and 45 degrees
$99500 966610701
• 24” ripping capacity - 18” tile on diagonal• 15 amp, 1.5 hp motor• 3-3/4” depth of cut allows for cutting of
V-cap and pavers
Heavy-Duty 10” Wet Tile Saw
TS 60 10” Tile Saw with Stand
• Accommodates materials up to a 8” x 8” x 16”.
• 15 amp, 3 hp motor• 14” blade• Diamond blade included
$79955 BBM307
Block Buster Electric Masonry Saw
Econ-O-Shim®
34 ¼” Black plastic horseshoe 1½” x 3½” (100/bag) $14.0036 1/16” Blue plastic horseshoe 1½” x 3½” (100/bag) $7.5038 1/8” Red plastic horseshoe 1½” x 3½” (100/bag) $9.75
Vers-A-Shim® Shim Strips And Vers-A-Packs
PC4414-SHEET ¼” X 4” x 4” black (9/pack) $9.00PC4416-SHEET 1/16” X 4” x 4” blue (9/pack) $2.25PC4418-SHEET 1/8” X 4” x 4” red (9/pack) $4.50SP46VS-2 2” Vers-a-pack 32 ea 1/16” x 4” x 6” shims/pack $9.50
• Compressive strength of 10 to 12,000 psi.
• Econ-O-Shims will not rust, rot, stain or leach• Color coded thicknesses
• For the precast / tilt-up industry• Compressive strength of 10 to 12,000 psi.• Convenient thicknesses, lengths and widths.
Poly Pro Steel-Reinforced Plastic Trowel Blade
Gold Pro® Blade For Ride On Trowels
• Blade life comparable to steel blades• Provides a hard, polished fi nish• Precisely-sized steel backing plate adds rigidity
and proper fl ex points
Starting at $73.50 Each
• Constructed from extra thick high-performance tool steel
• Field tested and proven to provide 25% to 50% longer life than most silver trowel blades
• Available in fi nish and combination-blade styles only
Starting at $17.00 Each
Blue Xl® Blade
• MAXIMUM VALUE for walk-behind and ride-on power trowels
• Proven record in delivering 15% to 25% longer life than standard silver blades
• Available in fi nish and combination-blade styles only
Starting at $12.50 Each
Original Silver Blade
• For use on walk-behind and ride-on power trowels
• Silver-polished blade gives maximum fl ex to ensure a smooth, chatter-free fi nish
• Wagman’s heavy-duty construction makes it one of the most consistent wearing and longest lasting blades available.
Starting at $11.90 EachDiamond Blades
Buy 3 Or More For
$22900 Each
161291 12” Blade
• 1/20 MM Arbor • Wet or dry cutting • High speed or walk behind saw applications
Buy 3 Or More For
$33000 Each
161294 16” Blade
Buy 3 Or More For
$26500 Each
161293 14” Blade
Uniform Consistency
In The Diamond
Segments Improves
Cutting Speed, 65%
Improvement
Rental Rates
Daily $55
Weekly $195
Monthly $475
si.dths.
dity yyyyyyyyyyyyyyyy
g
ows for cutting offfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff f
$89955 D24000
See Page 38 For Walk Behind and Ride-On Trowels
Aluminum Brick Hod
$6880 CWT5BH
Aluminum Mortar Hod
$8600 CWT-4MH
Large Assortment of Masonry
and Tile Blades Available
1CC625 6’ X 25’ CC CURING BLANKET CELL FOAM
1CC1225 12’ X 25’ CC CURING BLANKET CELL FOAM
Call For Quantity Discounts And Rental Rates
ClosedCell
Curing Blankets
BUY 10OR MORE AND
SAVE!
Barrel Mount Power
Sprayer
OMS201 Barrel mount power sprayer $2449.00560060 Hand cart for S201 sprayer $950.00
• For spraying all types of curing compounds• 3 HP Honda engine• 25’ hose
Morrison Truss Screeds AvailableSales And Rental
Bartell Morrison Inc
Economy Nail Stakes
17134018NS 3/4” X 18” Steel nail stake $2.3017134024NS 3/4” X 24” Steel nail stake $3.9517134030NS 3/4” X 30” Steel nail stake $4.2517134036NS 3/4” X 36” Steel nail stake $4.50
Quantity Breaks Available
11St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
MASONRY SUPPLIES
Portable Masonry Saw
$269500 966006506 Stand Sold Separately• 4.8 HP Honda engine• 5” max depth of cut• Patented sta-level blade guard• Blade included
14” Gas Powered Portasaw
$189500 966006502 Stand Sold Separately• 1-1/2 HP electric engine• 5” max depth of cut• Blade included
RO116-11 11” Narrow London pattern wood handle $30.50RO116-111/2 11½” Narrow London pattern wood handle $30.50RO116-12 12” Narrow London pattern wood handle $30.50RO116-13 13” Narrow London pattern wood handle $32.25RO316-11 11” Narrow London pattern leather handle $43.25RO316-111/2 11½” Narrow London pattern leather handle $43.25RO316-12 12” Narrow London pattern leather handle $43.25RO316-13 13” Narrow London pattern leather handle $44.95
• Meticulously hand crafted with a special tool steel
• Blades are forged and perfectly heat tempered
• The blade, ferrule and tang are bound as one piece
Brick Tongs, Handles 6-11 Bricks
“A” Series Concentrated Mortar Color
$1875 BC384
$2225 BL280
$1625 To $2025 Available in 4 lb. bags
Light Buff, Dark Buff, Tan, Deep Tan, Golden Brown, Brown, Red, Pink, Deep Red, Light Chocolate, Dark
Chocolate, and Iron Black
149LSB92508 Scaff old board 1-1/2” x 9-1/4” x 8’ $24.90149LSB92516 Scaff old board 1-1/2” x 9-1/4” x 16’ $56.25
• Longer spans and greater on center spacings save money• Durable for multiple reuse• Applications: slab forming, wall forming, and shoring members
Dovetail Anchor Slot• 22 gauge x 10’ long• Filled with polyurethane as it is
roll formed• The foam stops concrete grout
from entering the slot but still permits dovetail anchors to be easily installed
$675 Each13010DTS-22
034040 Folding masonry saw table $140.00
Masonry Saw BladesLarge Assortment Of
Diamond Blades In Stock4” To 36”
A Size For Every Job
Tuck Pointng Blades 542774592 4” Tuck point DT5 general purpose $39.25542774593 4-1/2” Tuck point DT5 general purpose $45.25542774595 7” X .25 Tuck point DT5+ general purpose $69.75
U505M 5’ Masons panel $89.95U665E 6’6” Walkthrough panel $113.30U765AG 7’6” Mason walkthrough panel $172.75S25G 18” Screw jack with base plate $32.30F-8R 8” Stem type caster with foot lock $55.005HL 5’ Unibilt cross brace angle type $26.607HL 7’ Unibilt cross brace angle type $30.50
See Aluminum Scaffold Planks On Page 43
Call ForSales Or
Rental
Plaster/Mortar Mixers
$334900 WM90PH8• Capacity: 2-1/2 to 3-1/2 bags• 8 HP Honda engine• Manual dump action
9 CU. FT. POLY DRUM
Rental Rates (WM90PH8)
Daily Weekly Monthly
$50 $175 $445
$435000 EM120SMH11• Capacity: 3-1/2 to 4 bags• 11 HP Honda engine• Cast iron paddle arms
• Tag system includes Tag Holder (red for danger), Caution Restriction (yellow) and Ready for Use Scaff old Complete (green).
• Plastic tag holder slips over the stacking pin to alert all workers to a jobs status.
12 Cu. Ft. Steel Drum With Coupler
$286700 WM70PH8• Capacity: 1-1/2 to 2-1/2 bags• 8 HP Honda engine• Manual dump action
7 CU. FT. POLY DRUM
Rental Rates (WM70PH8)
Daily Weekly Monthly
$50 $175 $445
80 1/2 and 5/8 brick jointer $5.5081 3/4 and 7/8 brick jointer $5.5082 5/8 and 3/4 brick jointer $5.5083 3/8 and 1/2 brick jointer $5.50
Laminated Scaffold BoardsWL013 Vinyl grout bag with metal tip $5.50BC291 30” Folding mortar box stand $59.25
mason a comfortable fi rm grip. • Handle and blade well balanced for
less wrist and arm fatigue.
RO116-11SH 11” Narrow London pattern Proform® grip $35.25RO116-111/2SH 11½” Narrow London pattern $35.25RO116-12SH 12” Narrow London pattern Proform® grip $35.25RO116-13SH 13” Narrow London pattern Proform® grip $36.95
$975 148OIL 1 PINT
Raw Linseed Oil• Preserves, protects & beautifi es hardwood levels• Protects tools and equipment from rust
542761412 7” TSD-S mas/conc/stone/hard material blade $39.25542750665 14” X .110 MS-5 combo masonry blade $242.50542774809 14” X .125 MI5 masonry blade $319.00542775645 14” X .125 BHT3 hard concrete $259.25542750666 20” Banner Line MS Brick and Block blade $424.50
Tile Blades 542761270 10” Superlok GP wet cutting blade $72.25542761276 10” Superlok continuous rim diamond blade $105.00542761284 10” Vari-cut tile blade with continuous rim $94.00
15% Off On All Diamond Blades
As Low As
$765 EACHWhen You Buy 50 Or More
$26000 700318
Mortar Boxes
Hubbard Brick Jointer with 4 Blades
• 9 cu.ft.• 16 gauge steel• 11” deep x 25.5” x 70.5”
$11600 BL375
• 7.5 cu.ft.• 8” deep x 33” x 56”
• Comes with 1/2”, 5/8”, 3/4”, 7/8” blades• More knuckle clearance and long lasting
Poly
Mortar Box
8
MI5 Blade
Included
MI5 Blade
Included
12 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
FOUNDATION SUPPLIES
Snap-In Place Windows
• Designed for ultimate ease of installation
• Automatically seals on installation
• Fits Competitors OpeningsTUFB0835 32 X 19.5” X 8” Full window buck $480.00TUFB0308 32 X 19.5 Insulated slider full fi n $93.50TUFBO409 4’0” X 4’0” insulated single slider full fi n $265.50TUFBO215 8” Drop hanger 8”/10” in wall window bucks $46.00TUFB0830 32 X 19.5 X 8” full 1 pc. Window in wall buck $435.00
Pricing For Forms, Ties And Window Bucks Available Upon Request
Chemical Sprayers
Delivery Available
9 FtForms
AvailableFor
Rental
• Call for sales or rental• Rental purchase options available• Form take off s off ered for all projects
Concrete Form RentalForm Layout For Commercial And Residential Jobs
621101 Rod tie cutter $27.95154060 6’ Tie cutting bar with chisel points $33.75SH100 Strap hinge for gates corner forms $1.64CFT8 8” Top spreader 25 per box $51.65
3/4” X 48” X 96” HDO Plywood 100/100 Density
Available For Gates Forms
Sprayer Accessories
The Way To SpraySince 1884
Nozzles Repair Kits Extensions
• Designed for both day-to-day cleaning and cleaning that has been delayed for awhile!
1-1/8” Plywood Forms, Gates, Aluminum And Custom Designed Forms Available For Commerical Or Residential Construction Large
Selection In-stock And Ready For DeliveryCall For Details
$7995 22360• NEW - 4-1/2” wide opening for easy fi lling and cleaning.• VITON equipped for maximum chemical resistance.• 42” heavy duty nylon reinforced hose to resist chemicals.
3 Gallon Poly Acid Sprayer
$8495 1449• “Standard” wand and “clamp on” spray handle• VITON™ o-rings and gaskets for maximum
resistance to chemical attack• “Funnel top”
3.5 Gallon Concrete Sprayer
$10500 6002• Develops up to 150 psi.• 84” reinforced hose• Sprays from any container 5-55 gallon
Trombone Sprayer
2
gallollllllll n
p y
p y
GATES® Concrete Forming Systems
Accessories
BEST
VALUE
$3925 31420
$13575 22149
$6150 22230
• Funnel top design for no mess in mixing and cleaning• Adjustable nozzle • Tri-Poxy® metal
• Resistant to the most extreme chemicals and high concentrations of acetone, naphtha, xylene and toluene
• Dripless wand • Improved chemical resistant hose
• Acid and chemical resistant seals and gaskets• Auto/manual high pressure relief valve• Lock-off feature to prevent accidental discharge
2 Gallon Steel Lawn and Garden Sprayer
3 Gallon Dripless Xtreme Poly Concrete Sprayer
1 Gallon Industrial Acid Staining Sprayer
• iForm fl at wall forms produce steel-reinforced concrete walls that are straight, square and plumb
• Perfect for both commercial and residential construction• Available in fi ve sizes - 9”, 11”, 13”, 15”, and 17” and in six confi gurations
Takes the Insulating Concrete Form (ICF)
Industry To a New LevelCall Today For A Quote
Efficient And AccurateDuraform Saves Time And Money
On Your Residential, Agricultural And Light Construction Applications
Duraform Is CompleteThere Are Not Parts To Lose
Duraform Is AccurateDuraform Is Versatile
Low Cost Per PourThere Are Panels In Use With Over 300 Pours To Their Credit
Call For Pricing And
Availability
Full Line Of Accessories And Ties In-stock And
Ready For Delivery To Your Jobsite
141000 3 HP form oil sprayer, 27 gallon w/100’ hose $969.00
LARGE SELECTION OF FORM TIES AVAILABLE FOR SIMPLEX, SYMONS, GATES, ALUMINUM,
AND PLYWOOD FORM SYSTEMS
$11800 1954 (blue) or 1954R (red)• Available in blue and red for easy identifi cation
of chemicals on the job site• Tri-poxy® lined steel for triple protection against
corrosion, rust and damage from denting• Includes two sprayer tips• Now with Crush proof wand!
Nu Way 4 Gallon Pump Sprayerer
61800 Pro Series Backpack Sprayer $76.25
13St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
Rebar Estimating and Rebar Estimating and Fabrication Available Fabrication Available
At All LocationsAt All LocationsJobsite Delivery Available
1-1/8” Forming Systems Accessories
TWC450 Top waler $9.50WB6 2 X 6 waler bracket - fi ts ez-lok forms $8.75WBW-4 4” Waler with wedge bracket $10.75OC250 Off set clip $3.50EC100 Corner clips - fi ts ez-lok forms $2.75ST100 1/2 Corner clip $1.75CC22 22.5 Degree outside corner clip, 1 pc. $9.25CC30 30 Degree outside corner clip, 1 pc. $9.25CC45 45 Degree outside corner clip, 1 pc. $8.00CC90 90 Degree outside corner clip, 1 pc. $9.50HC150 1-1/8” To 1-1/2” stacking clip $5.00HC112 1-1/8” To 1-1/8” stacking clip $5.30
FOUNDATION SUPPLIES
Tie-Breaker Tools
BT2 Break off tool for simplex/durform ties $10.00BT10 “Tiebreaker” heavy duty break off tool $24.95
Other Forming Accessories
RC6 Adjustable coil tie - use with 1/2” coil rod $3.00RH6 Rebar hook for up to #6 rebar $2.75FN450 4½” Foam nail with metal washer -100 per box $16.50FN550 5” Foam nail with metal washer -100 per box $18.50FN650 6½” Foam nail with metal washer - 50 per box $14.00
Quantity Breaks Available On Foam Nails
Replacement PlywoodCall Your Sales Representative
Today For Details On
Replacement Plywood For
Your Forms. We Can Also
Refurbish Your Forms For You.
Call Today For A Free Quote
2416SPFSB 2” X 4” x 16’ Standard and better spruce $9.95344896CDX 3/4” X 4’ x 8’ CDX yellow pine plywood $34.50149LSB92516 1-1/2” X 9-1/4” x 16’ Microlam boards $56.25
Plastic Bar Supports
Forming Lumber and Microlam Boards
1711520 1” Plastic bar chair with base $.161711522 1-1/2” Plastic bar chair with base $.201711524 2” Plastic bar chair with base $.241711526 2-1/2” Plastic bar chair with base $.231711530 3-1/2” Plastic bar chair with base $.251711555 5” Plastic bar chair with base $.36
Anchor Bolts
As Low As
13¢EACH
As Low As $915 EACH
NORTHROCK INDUSTRIESConcrete Vibrators
$46675 30BA1 PRO 1.5+ 13 AMP POWER UNIT • High strength cast aluminum housing• Rugged shock absorbing frame• Replacements for all other brands
30BA2 Pro 2+ 15 amp power unit $514.7530BA3 Pro 3+ 19 amp power unit $670.00
Call For Pricing On Vibrator Packages
Vibrator Heads And Shafts
30D1 1” X 12” Vibrator head $129.0030F15 1-1/2” X 14” Vibrator head $232.5030G17 1-3/4” X 14” Vibrator head $269.5030H2 2” X 14” Vibrator head $297.5530J25 2-1/2” X 14” Vibrator head $335.0030A2 2 ft Shaft for vibrator $65.7530A5 5 ft Shaft for vibrator $120.5030A7 7 ft Shaft for vibrator $153.5030A10 10 ft Shaft for vibrator $198.7530A14 14 ft Shaft for vibrator $261.0030A21 21 ft Shaft for vibrator $354.00 Tie Wire And Accessories Available
Re-Chargeable Battery Operated
Re-Bar Tying Tools
$253000 RB397• 5 times faster than hand tying• Lithium-Ion battery• Approx. 2,000 ties per charge• Ties from #3 X #3 to #5 X #6
Applications: Building foundations, precast concrete products, fl oors and walls, retaining walls, and swimming pools
$275000 RB655
• Make ties in approx. 1 second with consistent tie strength.• High speed tying saves you time and money.• Wire usage is regulated automatically.• Ties up to #9 x #8 rebar
• Superior architectual fi nishes, without patches or rust.
• Reduces formtie-related costs as much as 70%
• Reduced inventory - “One size fi ts all jobs”.Compatibility
The SuperTie Systems are compatible with all job built commercially available form systems.Basic Uses
The SuperTie Systems are appropriate for use in all forming applications, but is especially benefi cial in situations such as architectual fi nishes. It also reduces costs in battered wall and “odd sized” tie situations, since the rod is cut to the length required at the job site.
Fiberglass Reinforcing BarBenefi ts of fi berglass reinforcing bar:
FRPRBR420 #4 X 20’ fi berglass rebar with texture $39.95
WaterstopsGreenstreak off ers a complete line of waterstop designs and material types to meet your specifi c need and application
• 2 Sizes of fiberglass rods - .308 And .50• 2 Sizes of grippers - 6000 lb. And 15,000 lb.
Call For Price Or Rental Rates
95707 49 X 36 x 60 Egress white steel window well $225.0096850 49 X 36 x 72 Egress white steel window well $265.00
AWLER371624W 37 X 16 x 24 Half round galvinized white window well $38.50
AWLER371630W 37 X 16 x 30 Half round galvinized white window well $44.50
87007 4040 Double glazed egress slider $191.5089161 49 X 36 Thermal hinge cover $311.0089265 55 X 48 Quarry view thermal cover $296.5095519 4 Rung egress white ladder $72.5097989R 4040 8” White steel egress frame $99.0098009R 4040 10” White steel egress frame $132.00
Door Bucks
Buck Sold Separately
Architectual Form LinersGreenstreak form liners are available in a variety of patterns and textures -- making it easy to add interesting detail into any structure without a lot of cost. Ideal for texturing tilt-up, cast-in-place and precast concrete
Wood And Rubber Chamfer
LA355 Chamfer cutter $23.751711210 1/2” X 12’ Wood chamfer strip $.18 PER LF
1713408 3/4” X 8’ Wood chamfer strip $.18 PER LF
1713412 3/4” X 12’ Wood chamfer strip $.18 PER LF
1711008 1” X 8’ Wood chamfer strip $.40 PER LF
1711012 1” X 12’ Wood chamfer strip $.41 PER LF
1711511 1-1/2” X 10’ Wood chamfer strip $.56 PER LF
1711513 1-1/2” X 12’ Wood chamfer strip $.59 PER LF
171612 3/4” X 10’ Rubber chamfer strip with tail $.68 PER LF
As Low As
12¢Per Foot When You Buy 5000 Or More Feet
Min-Max Thermometers
$1675 MIN/MAX
$3900 MIN/MAX-D
• Clearly shows min and max temperature in time period since last setting
• -40°F to +120°F: -40°C to +50°C +/- division accuracy, 1° div
• Digital Thermometer registers maximum and minimum temperatures in both Celsius and Fahrenheit scales
• +32º F to 122º F (2º div ) 0 to 50 ºC(1º div )
SC Seamless steel slump cone $42.00GTR Graduated tamping rod 5/8” x 24” - 6” scale $17.95SCB Aluminum slump cone base plate only $125.00SCOOP 1 Pc. Aluminum concrete scoop $22.75
Concrete Testing Supplies
WW42115 52” X 19” x 31” Window well - granite color $87.15WW44415 72” X 44” X 63” Egress window well $826.00WW44170 Clear window well cover for egress well system $241.50
One Piece Egress Window Well
System
We stock the following Waterstops
Mechanical, Hydrophilic and Mastic
15St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
40051 4” x 10’ Sewer & drain perforated pipe SDR35 $18.2540031 4” x 10’ Sewer & drain perforated pipe $7.50
WATERPROOFING & FOUNDATION SUPPLIES
• Commonly used in sandy soils• Single wall corrugated polyethylene pipe
with fi lter wrap• Cost eff ective and ecologically sound
alternative to gravel fi lled leach fi eld trenches
• 3” to 6” drain tubing available
• Plastic Culvert Pipe available in a variety of sizes
Drain Tubing And Culvert Pipe
1513102 3” X 100’ Perforated drain tubing with sock $63.851513100 3” X 100’ Solid drain tubing $41.251513100P 3” X 100’ Perforated drain tubing $41.251510024 18” Heavy duty sump lid $15.751511824 18” X 24” Sump well $33.501510233 2” X 3” x 3” Downspout adapter $4.501514100 4” X 100’ Solid drain tubing $50.951516100 6” X 100’ Solid drain tubing $133.00
10’ Drain Tubing Sections
151410 4” X 10’ Solid drain tubing $5.95151410P 4” X 10’ Perforated drain tubing $6.75
Plastic Culvert Pipe
Culvert pipe with max fl ow dual wall and bell end
1511220 12” X 20’ Plastic culvert pipe $179.001511820 18” X 20’ Plastic culvert pipe $330.001512420 24” X 20’ Plastic culvert pipe $514.00
Crack Repair Products
Sewer & Drain Perforated Pipe
CPR PRODUCTSComplete Crack Injection Repair Kit
Larger Sizes Available
“The Complete Foundation Crack Repair Kit” includes all the materials and tools you’ll need to epoxy inject a 3/64” x 10’ crack; along with a comprehensive instruction manual, data sheets and product MSDS. $13800 140CCRK
10’ Surface Seal KitA 100% solids, moisture insensitive, non-sag epoxy paste used primarily for sealing cracks prior to injection with #1001 injec-tion epoxy or #900 polyurethane resin. This FAST SETTING paste enables the user to inject within 30 minutes.
$4575 14010SSKIncludes: Surface Seal Paste, and surface mount injection ports.
10.5 oz. Epoxy Injection Kit
Carbon Weld Concrete Repair Kit
100% solids, moisture insensitive epoxy designed to perma-nently restore structural strength to cracked concrete. Unique wetting properties allow for maximum penetration into cracks above 0.005”
Carbon Weld straps come in packs of 8 linear feet (4 - 12” x 24” sheets). 35 stitch-bonded uni-directional carbon fabric is pro-duced from continuous tow carbon fi ber. Unique fi ber spreading techniques are utilized to obtain the correct UD fabric weight.
Includes: 4 sheets 1’ x 2’ carbon fi ber fabric, 30 oz. unit #400 bonding epoxy, safety glasses, disposable gloves, 4” roller pad and handle and roller pan.
$1825 140105IK
$11000140NCWK
Includes: Complete cartridge with bleed line, mixing container, 10 oz. high modulus, low viscosity, extended pot life injection epoxy
An Evolution In FootingConstruction, Drainage, And
Radon ReductionFeatures and Benefi tsDrainage is provided for both theinside and outside of foundationfooting
Reduces certain material and labor costs
Accommodates virtually any foun-dation layout
Conforms with EPA’s “Model Standards Techniques for Radon Control in New Residential Buildings.”
LN126 6” X 12’ Form-a-Drain lineal $16.50LN128 8” X 12’ Form-A-Drain lineal $19.25COUP6 6” Coupling $3.25COUP8 8” Coupling $4.95CN456 6” 45 Degree corner $7.50CN458 8” 45 Degree corner $8.50CN906 6” 90 Degree corner $4.75CN908 8” 90 Degree corner $5.75GS018 18” Grade stake price per box (100 pc) $75.25SS420 4” X 20” Spacer strap price per box (16 pc) $49.75SS424 4” X 24” Spacer strap price per box (16 pc) $51.95
Call For Complete List Of Parts And Pricing
Mel-Rol® Waterproofing System
• Flexible, versatile, dependable, roll-type waterproofi ng membrane• It is composed of a nominally 56 mil thick layer of polymeric
waterproofi ng membrane on a heavy-duty, 4 mil thick, cross-laminated polyethylene carrier fi lm.
• cost eff ective answer to properly waterproof foundations, vertical walls and below-grade fl oors in residential and commercial construction.
015110060 Mel-Rol waterproofi ng membrane self adhering, 38½” x 60’ $164.00
015130129 29 Oz. Pointing mastic for Mel-Rol waterproofi ng membrane $9.75
015160005 5 Gallon Mel-Prime primer for Mel-Rol waterproofi ng membrane $175.00
016055009 9” X 50’ Roll detail strip for Mel-Rol waterproofi ng membrane $48.50
• High performance, low modulus, one-component hybrid sealant• Off ers excellent performance in moving joints• Applications: Expansion and control joints, precast concrete panel joints,
perimeter caulking, EIFS, aluminum, masonry and siding• Available colors: Bronze, black, redwood tan, white and buff
Polyurethane Sealant
• 6:1 thrust ratio• Ladder hook• Seal puncture tool and built-in spout cutter
$695140188
Professional Caulk Guns
140125 1/4 Gallon hex rod parallel frame $14.00
pout cutter
• E-Z thrust 10:1 thrust ratio• Ladder hook• E-Z load front cap
$795140111
1/10 Gallon Super Ratchet Rod
1/10 Gallon Hex Rod Parallel Frame
• E-Z thrust 10:1 thrust ratio• Ladder hook• E-Z load front cap
$969140112D
1/10 Gallon Drip Free Hex Rod Parallel Frame
$2800139-3 1/10TH Caulk gun
$3700340-1 Quart Caulk Gun
Deluxe Manual Powered Caulk Guns
Engineered Systems For Coloring, Texturing & Performance In Architectural Concrete
Call For Product Information And PricingNu Way Rents Stamps See Page 17
“Changing The Way The World Looks At Concrete”
Texturetop®
Lithochrome® Chemstain™
Lithochrome® Color Hardener
Chromix Admixture®
Pavecrafters®
Heavy Duty Epoxy Joint Filler
140MM80 MM80 epoxy joint fi ller1 Quart “b”/1 gallon “a” = 1 gallon unit
$90.00 Per Unit
The Problem: Joint edge spalling
The Solution: MM80 Epoxy Joint Filler
• Heavy duty semi-rigid epoxy joint fi ller developed specifi cally for narrow joints in industrial concrete fl oor slabs
• Has a cured hardness of Shore A90-95/D50-55
• Specifi cally developed for heavy loads and hard wheel traffi c
• For exterior and interior use, will bond new concrete, Portland cement, plaster and cementitious mixes to structurally sound concrete fl oors, walls, columns, beams, steps and ramps
• Can be “painted on” in a single application 1 hour to 10 days prior to concrete placement
• It is also used for: bonding setting beds for ceramic tile
• Bonds new plaster to any clean, structurally sound, interior surface.• Covers approximately 300 to 400 square feet per gallon• Concrete, brick, block, glass, ceramic tile, wallboard, metals and marble are suitable
sound surfaces, structurally
28” Quick Mix®
$1475 819
• Saves time and energy• Fits any 3/8” or larger slow speed drill (500 rpm)• Blade measures 8-1/2 x 4-1/2
• Revitalize faded, worn color• Impart a consistent appearance to mismatched colors• Help conceal surface imperfections with color• Minimize appearance problems
819L 36” Quick mixer -- 3/8” x 36” shaft $16.25893 Jiff y mixer 3/8” x 16” shaft, 3½” wheels $29.75FM661 Drywall mixer with 2 - 5” wheels $16.00
MixingPaddles
Bonds to wood-treated or untreated, steel, aluminum, brass, and most other types of plastics; glass, ceramic tiles, brick, concrete, mortar, and most other masonry materials.
As Low As
$450
Each For 72 or more91016
As Low As
$695
Each For 60 or more91007
As Low As
$4975Per Case For 6 or more cases
33829
As Low As
$4575Per Case For 6 or more cases
45029
As Low As
$450 When You Buy 60 Or More9718006323 Clear
With JoistFollower
As Low As
$495When You Buy 90 Or More960805323 Limestone
Non-Skid Texture Additive
01804 Drylok E-1 non-skid texture additive 4 oz. $5.25
• Increases traction and helps prevent slipping and falling by providing a slip resistant coating
• For use with DRYLOK E1 1-Part Epoxy Floor Paint and other oil, latex or epoxy fl oor paints.
• Use on garage fl oors, patios, stairs, basements, driveways, ramps and walkways.
Got Faded Stained Concrete?
We have a solution.....
Bring faded concrete color back up to that “new” look, or bring consistency to mismatched colors.
More Product Info
17St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
CHEMICALS AND GROUTS
Concrete Patches And Grouts
Floor Leveler
SpecSmooth SPECSMOOTH is a one-component, polymer modified concrete repair / resurfacing mortar for smoothing, resurfacing, rubbing, and restoring concrete surfaces.
Nuway DeluxeForm Release Agent
SpecStripReactive Form Release Agent
SpecStrip PlusA Premium Reactive Form Release Agent
A chemically reactive form release agent especially engineered to positively prevent bonding of the concrete to forms and form liners. It provides no waxes or silicones. V.O.C. compliant.
A chemically reactive form release agent especially engineered to positively prevent bonding of the concrete to forms and form liners. It provides no waxes or silicones. V.O.C. compliant.
A chemically reactive form release agent especially engineered to positively prevent bonding of the concrete to wood, steel, and aluminum forms. SpecStrip Plus contains no diesel, kerosene, waxes or silicones. V.O.C. compliant.
Curing Compounds
SpecRezWater Based Dissipating Resin Curing Compound
Cure Hard Sodium Silicate Cure & Dustproofer
A water based dissipating resin based emulsion curing compound for use on freshly finished horizontal and vertical concrete surfaces. SPECREZ is formulated to provide an effective curing membrane that will begin to dissipate after exposure to sunlight, weathering and/or traffic. May contribute to LEED credits.
CURE HARD is a spray applied concrete cure, hardener and dustproofer. CURE HARD deeply penetrates concrete surfaces to densify, harden and dustproof concrete and Portland Cement based material surfaces to help them achieve maximum abrasion resistance and without altering the natural appearance of the concrete. May contribute to LEED credits.
SpecRock
SpecPatch
SC Precision Grout
SC Multipurpose Grout
SC Metallic Grout
Duo Patch
RepCon 928
SpecFlow
SpecPlug
SPECROCK is a one-component, waterproof, nonshrinking, Portland cement-based anchoring cement that sets hard in 12-15 minutes. It expands as it sets and locks into the surrounding concrete.
SPECPATCH is a general purpose concrete repair mortar for concrete floors, walls, precast, tilt-up and masonry surfaces. SPECPATCH can be used for horizontal and vertical applications to provide a durable repair that can be shaped by shaving or sanding.
SC PRECISION GROUT is a non-shrink, non-metallic , high-flow, cement-based grout. SC PRECISION GROUT is formulated for a wide variety of grouting applications, from plastic to fluid through a controlled, positive expansion. Designed for high flow precision grouting applications. Designed to provide effective load bearing capabilities.
SC MULTIPURPOSE GROUT is a non-shrink, nonmetallic multipurpose cement-based grout. SC MULTIPURPOSE is formulated for a wide variety of grouting applications, from damp pack to flowable through a controlled, positive expansion.
SC METALLIC GROUT is a non-shrink metallic cementbased grout designed for industrial applications subjected to dynamic and repetitive loading. SC METALLIC GROUT does not contain chloride and is formulated for a wide variety of grouting applications, from drypack to fluid.
DUO PATCH is a two-component, polymer modified concrete repair mortar with integral corrosion inhibitor for use in horizontal, form and pour and when mixed to a stiffer consistency, vertical and overhead applications. DUO PATCH offers superior durability in industrial warehouse, parking deck, and roadway applications subjected to heavy loads and abrasion.
REPCON 928 is a single component, polymer modified, fiber reinforced, rapid setting concrete repair mortar for use on concrete floors, highway pavements, bridge decks and other applications requiring early resumption of traffic or use. REPCON 928 is formulated to meet the requirements of ASTM C928 Packaged, Dry, Rapid Hardening Cementitious Material for Concrete Repair and AASHTO T260.
SPECFLOW is a cement based, non-shrinking, selfleveling floor underlayment designed for interior use. This single component product produces a smooth subfloor that will accept floor coverings in as little as 12 - 18 hours after installation. Just mix SPECFLOW with water, pour or pump, and it will seek its own level to produce a smooth, flat hard surface
SPECPLUG is a durable, fast-setting hydraulic-cement mortar that stops flowing water through holes and cracks in concrete and masonry surfaces. SPECPLUG will not shrink or oxidize.
Sealers
Deco Shine Plus
Crystal Shine
SpecSilane 20 WB
A methacrylate sealer developed specifically for exterior applications, including exposed aggregate and other decorative surfaces. Deco Shine Plus provides a clear protective coating that brings out the radiance and luster of all natural aggregate and preserves a long lasting, durable finish.
CRYSTAL SHINE is a lacquer sealer developed for interior and exterior applications, to bring out the radiance and luster of exposed aggregate and other decorative concrete surfaces with a durable protective finish. CRYSTAL SHINE is formulated with a unique solvent blend allowing fast-drying, solvent-base performance along with VOC compliance
A 20% solids, 100% reactive, waterborne silane sealer that is designed for use on interior and exterior above grade concrete or masonry surfaces. SpecSilane 20 WB helps protect concrete and masonry surfaces, decks, pavements, parking structings, ramps, bridges, marine platforms, etc. against the corrosive effects of deicing salts, moisture and weathering to prevent spalling deterioration of concrete structures. V.O.C. compliant.
Cures and HardenersSpecHard
Water-Based Siliconate Sealer/Densifi er
Surface Shine
A penetrating, water-based siliconate chemical solution that seals, dust proofs and hardens interior concrete floors. Floors last longer, cost less to maintain, are safe to use and are guaranteed to resist dusting for years after application. May contribute to LEED credits. It is V.O.C. compliant, odorless, environmentally safe.
A transparent, high gloss, non-yellowing acrylic polymer engineered as a cure and seal specifically for exterior surfaces such as exposed aggregate, natural stone, brick, quarry tile, terrazzo, and other concrete surfaces. It is also suitable for interior applications. Surface shine enhances the appearance of all treated surfaces with a high gloss sheen. Meets ASTM C-1315-95 Type I
Pavecure WW
SpecCity White
PAVECURE WW is a high solids water based white pigmented concrete curing compound. When properly applied, PAVECURE WW forms a continuous membrane that controls curing for strong and durable concrete. The white pigment reflects the sun’s rays to help keep the concrete surface cooler and to prevent excessive heat build-up. V.O.C. compliant.
SPECCITY WHITE is a white pigmented concrete curing compound. When properly applied, SPECCITY WHITE forms a continuous membrane that controls curing for strong and durable concrete. The white pigment reflects the sun’s rays to help keep the concrete surface cooler and to prevent excessive heat build-up. V.O.C. compliant.
CURE & SEAL 25 is a VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. Meets ASTM C-1315 and ASTM C 309, Type 1, Classes A & B
Nu Way Cure And Seal 2525% Solid Solvent-Based Cure & Seal
Form Release Agents
SFLOW SpecFlow premium self-leveling underlayment 50 lb. bag $25.95
DPATCH SC Metallic Grout non-shrink, 50 lb. bag + 1 gal jug $26.95
SCMETG SC Metallic Grout non-shrink, 50 lb. bag $24.75
SCMPG SC Non-Metallic Grout non-shrink 50 lb. bag $10.50
SCPCGROUT SC Precision Grout non-shrink 50 lb. bag $12.50
SPATCH SpecPatch general purpose 50 lb. bag $16.50
SSPLUS5 SpecStrip Plus Form Release Oil 5 gallon $48.75SSPLUS50 SpecStrip Plus Form Release Oil 55 gallon $426.25SSPLUS275 SpecStrip Plus Form Release Oil 275 gal. tote $2131.25
SSTRIP5 SpecStrip reactive form release agent 5 gallon $46.25SSTRIP55 SpecStrip reactive form release agent 55 gallon $395.00SSTRIP275 SpecStrip reactive form release agent 275 gall. tote $1966.25
NWDELUX5 Nu Way Deluxe form release agent 5 gallon $46.25NWDELUX55 Nu Way Deluxe form release agent 55 gallon $390.00NWDELUX275 Nu Way Deluxe form release agent 275 gal. tote $1925.00
DSP1 Deco Shine Plus concrete sealer 1 gallon $33.75DSP5 Deco Shine Plus concrete sealer 5 gallon $154.25DSPB1 Deco Shine Plus Brown concrete sealer 1 gallon $37.75DSPB5 Deco Shine Plus Brown concrete sealer 5 gallon $166.50DSPBR-5 Deco Shine Brown EX concrete low VOC sealer 5 gal. $195.00
PAVEWW55 Pavecure WW white pigmented curing compound 55 gallon $227.00
A 20 degree Baume Muriatic Acid (31.45%) for cleaning and etching masonry surfaces. Acid is an EXTREMELY CORROSIVE product. Meets Federal Specification O-H-765E (ASTM E 1146).
1394395 Muratic acid 1 gallon $6.95
• White tampico, densely fi lled • Two tapered handle holes (handle sold separately)• Acid resistant
$775 177
Heavy Duty Masons Acid Brush
1484585 #179 Masons acid brush (handle not included) $4.50
• White tampico • 20” long high density foam block• Acid proof
$575 78
White Tampico Acid Proof
75 8” White tampico brush $4.2566 8” Extra stiff blue plastic - acid proof $3.5067 20” Extra stiff blue plastic - acid proof $4.95
Cleaning Brushes
• White plastic • 6¾” handle• For applying all types of masonry and water paints
$550 565
White Plastic Solvent Resistant Brush
563 4¼” White tampico coater brush $3.85561 6½” White tampico brush $5.95
• 8” handle
$295 40
Palmyra Fiber Brush
44 20” Palmyra fi ber brush $4.95
$6500139CON20P
$15400139CON60P
• Unique chemical treatment for the waterproofi ng and protection of concrete
• Can seal hairline cracks up to 0.4 mm• Becomes an integral part of the substrate
$9660139MOD60P
• Applied as a second coat over Concentrate, Modifi ed produces a harder fi nish
• Speeds the curing of Concentrate• A single coat of Modifi ed may be used as an alternative to
a spray/tar emulsion• 60 LB. pail
$2575139CURE1G
• Curing agent designed specifi cally for Xypex crystalline waterproofi ng products
• May eliminate the need for water curing the Xypex coating in some cases
• Consult manufacturer for specifi c recommendations
Concentrate
Modified
Gamma Cure
$8475139PNP60P 60 LB
• Formulated as a crystalline, fast-setting, non-shrink, high-bond-strength, hydraulic cement compound for concrete repairs
• It stops fl owing water in seconds• Used to seal cracks, fi ll tie-holes and other defects in
concrete.
Patch’n Plug
1499030 9” Metal roller tray $4.3511266 3” Roller cover - 3/8” nap $ .99149B225 9” Pro one koat ¼” nap roller cover $2.09149B275 9” Pro one koat ¾” nap roller cover $2.75148RC1834 18” Roller cover ¾” nap pvc core $5.856002992 Paint strainer for 5 gal. Pail and pump up sprayers $22.95149R001 10” X 11½” wire paint screen for 5 gal bucket $3.49148A12 12” Lambswool pad only $8.65148A16 16” Lambswool applicator pad $9.75148AB12 12” Lambswool applicator and pad ¾” nap $10.25148AB16 16” Lambswool applicator and pad ¾” nap $12.95
See Page 19 For Rubber Gloves And Boots
Concrete Waterproofing By Crystallization™
A7 Adhesive Anchoring System
• All weather formula, down to 0°F and below• Fast curing time, 35 minutes at 60°F• Works in damp holes and underwater applications
• 26:1 Thrust Ratio• Extra Durable Heated Treated Piston
Rod• Side by Side Epoxy Applicator
1-1 Epoxy Ratio
2-1 Epoxy Ratio
1-1 Epoxy Ratio$2075 A7-10 10 ounce
• All weather formula, down to 0°F and below• Fast curing time, 35 minutes at 60°F• Inlcudes nozzle and fi ts A100 tool
E24XL Epoxy nozzle 1/2” use with G5 and C6 epoxy $4.95E102 Epoxy gun for C6-18 oz. or G5-22 oz. $115.25A100 Epoxy dispensing tool for use with A7-10 $40.50
C6 Fast Curing Epoxy
• NSF standard 61 certifi ed for drinking water systems• 1 hour cure time at 70°F• Works in damp holes and underwater applications
$2925 C6 18 ounce
$3550139PNP20P 20 LB
1-1 Epoxy Ratio
2-1 Epoxy Ratio
1-1 Epoxy Ratio
Special Patch Horizontal Repair Mortar
A polymer-modified cementitious twocomponent concrete repair mortar for use in thin and thicksectionconcrete patching and overlays.
139150 Special Patch horizontal repair mortar 50 lb. $28.50
Enduro 50 Non-Shrink GroutSpecially designed for damp pack to fluid applications. It is a blend of Portland Cement and natural aggregates with cementitious expansive agents.139050 Enduro 50 non-shrink grout 50 lb. Bag $10.50
Spectrum Sealer
Crystal Seal Concrete Sealer
Tough Seal Concrete Sealer
A single component transparent liquid designed sealer developed specifically for exterior surfaces, including exposed aggregate and other concrete surfaces. Spectrum’s reacted aliphatic polymer system brings out the radiance and luster of all natural aggregate and preserves a long lasting, durable finish.
Weather Seal WBPenetrating Sealer For Concrete And Masonry
Weather Seal WB is a water base deep penetrating siloxane sealer designed to protect concrete and masonry surfaces, decks, pavements, parking structures, ramps, bridges, marine platforms, etc.. 139497 Weatherseal WB siloxane sealer 1 gal $22.65139498 Weatherseal WB siloxane sealer 5 gal $98.25
Silane 40Liquid Penetrating Sealer For Concrete Surfaces
A non-water base deep penetrating sealer designed to protect concrete and masonry surfaces, decks, pavements, parking structures, ramps, bridges, marine platforms, etc..
139171 1 Gallon tough seal concrete sealer* $33.75139172 5 Gallon tough seal concrete sealer* $154.25
139269 1 Gallon crystal seal concrete sealer $34.50139268 5 Gallon crystal seal concrete sealer $157.50
• Clear wet look fi nish• USDA accepted• 250 - 350 sq ft/gal coverage fi rst coat
*Will not resist brake and hydraulic fluids
• Chemical, gas and oil resistant*• Dries to a high gloss• 200-250 sq ft/gal coverage fi rst coat Chemical
Resistant
Great ForDecorative
Concrete
19St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
WORK WEAR
• Refl ective strap• Fits over most work shoes and boots• Made in USA
• Feather light, Durable construction• Chemical and UV resistance• Made in USA
$287584050Size 7 Thru 15
$5700BFCSBSize 4 Thru 13
17” Hi-Viz PVCSlicker Overboot
16” CruiserSafety Boot
Self Cleaning
Cleated Sole
Composite
Safety Toe
• Fits over work shoes• Sizes Available: 8 thru 18• Rubber soles for slip resistant comfort
$21951479010
5 Buckle Rubber Boots
Deluxe Carpenter Apron - Fixed Pockets
$4345 174274• Reversed Top Grain Leather • 5 Main nail/tool pockets• 6 Smaller pockets fi t pliers, nail sets, pencils, etcts, pencils, et, eeeeee, eeeee, eeeeeeeeeeeee, ee, ee, e, ee,,, c
21448 17 Pocket heavy leather pro framers combo system $185.951461714 23 Pocket 5 pc. Comfort lift combo $85.505608 16 Pocket 4 pc. Cordura carpenters combo $84.15178234 8 Pocket leather carpenter’s nail & tool bag $28.85179354 10 Pocket leather carpenter’s nail & tool bag $42.75149C12 5 Pocket canvas waist apron $4.95
1164 32 Pocket 24” Megamouth tote bag with metal frame $52.95304X 20” X 16” Reinforced Mason’s leather bottom tool bag $51.65C300 24” X 16” Leather bottom tool bag $64.00
KneePads
146361 Ultrafl ex non-skid professional kneepads $20.75146363 4 Pc. Replacement strap for ultrafl ex knee pads $5.30146G361 Professional Ultra-fl ex gel knee pad $25.85146V310 Molded, natural rubber kneepads $13.85146V6355 Buckle style easy-swivel kneepads $23.00146V6356 Buckle style non-skid kneepads $27.50
Belts AndSuspenders
C501 Heavy duty cotton web work belt $7.50E4521 2” Embossed leather work belt, fi ts 29” - 46” waist $19.255625 5” Padded comfort belt, fi ts 30” - 46” waist $28.00110USA USA print heavy duty elastic suspenders $13.15110BLU Blue heavy duty work suspenders $10.75
• No Right/ No Left - For no-hassle design • Easy on/ Easy off - Provided by 800% elongation, and
smooth, drag-free inner surface• Lasts 4x longer - Made out of Natural Latex Rubber,
• ANSI/ISEA 107-2004 Class 3 certifi ed.• High visibility fl uorescent yellow body
material with retro refl ective stripes.• Jacket, bib pants, detachable hood.
$5495R111Large Thru 3X Large
High Visibility Class 3 Certified Rain Suit
$3155 1101• 9.5 oz. Heavy Weight 100% cotton material• 3 rule/cell pockets and hammer loop• Chap-style double knees with opening for knee pad• Made in USA
1101 Double Front
Painter Pants®
WORKWEARMade in the U.S.A.
2-Pc.
Trench Coat
Available
20 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
6840D Pro series solid brass padlock $17.506321KA Pro series 2-1/8” keyed alike high security $26.506325KA Pro series 2-3/8” keyed alike high security $31.956327KA Pro series 2-5/8” keyed alike high security $35.65
Large Selection Of Keyed Alike Padlocks
Available
$2550 6321D• Solid iron shackle shroud resists harsh physical
attacks • 5 spool pin tumbler cylinder for added pick
• Designed exclusively for Lockout/Tagout applications
• Compliance with OSHA “one employee, one lock, one key” directive
Lightweight Safety Lockout
6121KA Pro series 2-1/8” weather tough keyed alike $19.506121LJKA Pro series 2-1/8” weather tough lng shackle $20.506125KA Pro series 2-3/8” weather tough keyed alike $22.506127KA Pro series 2-5/8” weather tough keyed alike $25.75
$1850 6121D
• Hardened boron alloy shackle for superior cut resistance • 5 spool pin tumbler cylinder for added pick resistance • Dual ball bearing locking mechanism resists pulling and
prying
Pro Series Weather Tough Padlock
Job Site Security
3/8” X 6’ Coated Steel Cable
$875 78DPF
• Braided steel wires for strength and fl exibility• Galvanized steel cable resists rusting• Recommended use with laminated, solid steel and mini
U-Locks
3/8” X 6’ Adjustable Locking Cable
$2200 8413XDPF• Patented locking mechanism holds the
cable tight at any position• Convenient, rekeyable cylinder • Weather tough and rust resistant lock
body and cable
79DPF 5/8” X 6’ coated steel cable $20.501777941300 3” X 300’ Mini roll caution barrier tape $4.95
Resettable Coated Cable Lock
$1295 8119DPF
• Flexible braided steel cables for strong cut resistance
• Set-your-own combination convenience and security
• Ideal for ladders and generators
6-1/4” Industrial Grade Single HingeHigh Security Hasp
$950 720DPF
• Hardened steel body for added strength • Hardened boron alloy staples resist cutting and sawing • Secure hard-to-lock property
702D 2-1/2” Security hasp $3.45703D 3-1/2” Security hasp $4.25704D 4-1/2” Security hasp $5.25706D 6” Security hasp with pinless hinge $9.65
Solid Steel Round Padlock
$1400 40KADPF
• Hardened steel shackle for extra cut resistance • 4-pin cylinder helps prevent picking• Ideal protection against bolt cutter attacks
150675 Curved clear visor for V40 and 677 headgear $5.001508154LF Clear visor for 150K huntsman ratchet type headgear $4.50
Hard Hat Visors
313000 Half mask, dual cartridge $31.75T105810 Multi containment fi lters for respirator (sold in pairs) $25.501508500 RPDM crews nuisance dust mask 50 per box $11.952300N95 Dust and mist respirator with exhale valve $2.692200N95 Model 2200 dust and mist respirator $1.69
Respirators And Dust Mask
$1295 71216
• CoolSense Air Flow • Rain trough helps keep rain off workers • Complies with ANSI standard for Type I, Class C only• Available in orange, white and pink
Serpent Hi-Viz “Ventilated” Hardhat
Prevents Heat Build-Up To
Keep You Cooler
3” X 500’ Re-inforced Barricade Tape
• 7 Mil thick• Does not stretch or sag over time• Embedded with woven polyester
fi bers for added tensile strength
$2325BR357Y16
21St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
XT60004850 4’ X 50’ Green diamond $35.50150201100 4’ X 100’ Orange safety fence, 30 lb. $54.5015060 60” Studded “T” post with anchor plate $6.50
SAFET Y SUPPLIES
If you do not see what you are If you do not see what you are looking for, ask a Nu Way rep looking for, ask a Nu Way rep and we will order it for you!and we will order it for you!
Wide Body Traffic Cones
12” Wide Body
Traffic Cone 3004019
3004042 18” Wide body traffi c cone $11.253004158 28” Wide body traffi c cone $18.35
Nemesis Safety Glasses
• Meets all ANSI Z87.1+ impact standards• 99.9% protection from harmful UV rays• Soft touch temples for added comfort,
• Larger lens for more complete wrap around protection• Precise placement of inserts allows for distortion-free forward vision• Meets ANSI Z87.1+ Impact Standard
3011713 +2.0 Diopter brown lens $14.253011714 +2.5 Diopter brown lens $14.25
Safety Glasses
$495 14GB7MBlack Frame/Gold Mirror Lens
14GB83 Black frame/gray lens $3.9914GBOM Black frame/indoor-outdoor clear mirror $4.80
$2695 41GB3Z4x4™ Black Frame/Black Temple Tips/Gray Polarized Lens
• Wrap-around frame• Meets or exceeds ANSI Z87.1+ standard.• Polycarbonate lenses that come with an anti-scratch coating.
• Feather-light for all-day comfort • Meets or exceeds ANSI Z87.1
standard CSA Z94.3 certifi ed • Scratch- and impact-resistant
21047 2XL/3XL class 2 econo orange vest mesh #8210Z $10.9521055 L/XL class 2 econo lime vest mesh #8210Z $10.7521057 2XL/3XL class 2 econo lime vest mesh #8210Z $10.75
• Looped handle allows for easy movement and handling
• Made of durable bright orange low density polyethylene
• Tested and certifi ed to meet the crash worthy requirements of NCHRP-350
• Red cone with black base• 6” Upper and 4” lower refl ective collar• Engineered to meet MUTCD Spec and
NCHRP-350 category requirements
Looper Channelizer Cone
Quantity Breaks Available
As Low As
$2255Each
For 100 or more46266CRU
Base Sold Separately
30DH 30 LB. Base
As Low As
$1700 Each
For 100 or more
16DH 16 LB. Base
As Low As
$895 Each
For 100 or more
DOT
APPROVED
$2150 22115Orange L/XL 8320Z
• ANSI Certifi ed Polyester Mesh (5 oz.)• 2” Level 2 ANSI Certifi ed Tape• One inside pocket• ANSI 107-Class 2
22117 2Xl/3xl class 3 orange vest mesh #8320z $21.5022125 L/xl class 3 lime vest mesh #8320z $21.5022127 2Xl/3xl class 3 lime vest mesh#8320z $21.50
Class 3 Hi Visibility Vest
Fat Head Safety Glasses
$1275 SK-XL118Blue Mirror Lenses
• Complies with ANSI Z87.1 2003 • Edge frames are lightweight, fl exible and durable • Scratch resistant and off er UVA, UVB and UVC protection • Yellow, smoke and silver mirror lenses available
SKAP-XL119 Kazbek XL with red mirror aqua precision lenses $13.00
Dakura Camo Safety Glasses
$1075 SW112CFYellow Lenses
• Complies with ANSI Z87.1 2003 • Edge frames are lightweight, fl exible and durable • Scratch resistant and off er UVA, UVB and UVC protection • Copper and smoke lenses available
Khor Safety Glasses
$1300 SDK116Smoke Lenses
• Complies with ANSI Z87.1 2003 • Edge frames are lightweight, fl exible and durable • Scratch resistant and off er UVA, UVB and UVC protection
Safety Fence• Made of durable polyethylene • Rugged yet fl exible, reusable, high
visibility, and U.V. stabilized• Ideal for temporary or permanent
enclosures
Gift CardGift CardBUILDING MATERIALS • CONSTRUCTION EQUIPMENT • CONCRETE SUPPLIES
Great For
Gift GivingCall For Details
22 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
• 4” X 60’• Self adhesive• Black
$5100 NST20BK-4X60
Non-Skid Abrasive Safety Tape
SAFET Y SUPPLIES
Fall-Arrest Harnesses
$8450 87140
• Lightweight polyester construction for comfortable all-day use
• One “universal” size fi ts most people.• Harnesses are certifi ed and compliant with
ANSI and CSA requirements.
87141 Klein-lite® full body harness, d-ring $112.7587145 Klein-lite® full body harness, 3 d-rings $147.9587473 6’ Klein-lite® nylon-webbing deceleration lanyard $94.50
$17525 87150
• Includes Fall-Arrest Harness and Deceleration Lanyard.
Klein-Lite® Tradesman’s Set
S1603 Espresso lens with black frame $6.25S1604 Mirror lens with black frame $8.25
Bandit™
$545 S1600Black Frame with Clear Lens
• Contemporary, sporty wrap around styling • Adjustable temple length • Proudly made in USA
S1903 Mirror lens with black frame $7.95
$689 S1901Black Frame with Espresso Lens
• Wrap-around protective spectacle off ering exceptional comfort, protection and fi t
• Meets ANSI Z87.1-1989 eyewear requirements• Proudly made in USA
Skyper
Replacement Lens Available
$1150 93212Fixed front goggles
• Fits easily over prescription glasses.• Supplied with a 2” x 4-1/4”, shade 5 lens protected by a clear cover lens.• 6 vents that assure ample ventilation.
$1500 93213Lift front goggles
Welding Goggles
• Fits easily over prescription glasses.• 6 vents that assure ample ventilation.• Supplied with a 2”x4¼”, shade 5 lens protected by a clear cover lens.
$4250 3002498
• Narrow shell design is perfect for work in tight spaces• Can stand up to radiant heat of 350˚ F• Meets ANSI Z87.1, CSA Z94.3 standards.
Welding Helmet
Rental Rates
Daily $55
Weekly $195
Monthly $495
Rental Rates
Daily $300
Weekly $765
Monthly $2250
WTSP-08
WTMMB-SLL (A)
• 48” X 96” trailer mounted sign• 2 Solar panels• 4 Lead acid batteries
• Solar panels charge batteries automatically• Under 3000 pounds• NTCIP compliant, Meets MUTCD,AASHTO
RIAC1 Sliding belt connectorpoints - 3 pack $16.25RIAT1 Mini cell phone holder with snap $11.45RIAT2 Regular cell phone holder with snap $12.90RIAT5 Med. Open bolt/bull pin bag $24.58
RIAT6 2 Pocket nail & tool pouch for revolution harness with connector $21.25
RIAT8 Padded hammer loop with connector $9.59RIAT9 Open end pliers and tool holder $9.59RIAC2 Universal accessory & belt clip for revolution system 2/pack $7.90
Harnesses, Lanyards And Rope Grabs
496 5,000 Lb Miller Grip anchor $132.00497 10,000 Lb Miller Grip anchor $235.00
Miller Grip Portable Anchorage Connector
842844/LYK Full adjustable body harness non-stretch polyester webbing $199.50
E650-77 Harness w/back pad and belt fully adjustable w/ side rings $193.85
$30525 RDTQCBDP/UBKUHARNESS WITH PADDED BELT, SIDE D-RINGS
$23275 RDTTB/UBKUHARNESS WITH TECH WEBBING & TONGUE BUCKLE
920-2003 Blue leather welding gloves sewn with Kevlar thread $15.25
15 Lite Solar Powered Arrow Board
Variable Message Sign Board
Rebar Safety Caps
As Low As
$125Each For 1000 or more
PC110 #3 - #8 Impalement prevention with steel plate
As Low As
24¢Each For 100 or more
1713125 small #3-#9 Hi Viz Orange Mushroom Style Safety Cap
PC200 #8 And up impalement prevention w/steel plate $4.20
1711225 Large #8 - #18 hi viz orange mushroom style $ .45
Rebar Chain Assembly with 2” Rebar Hook
3’ Webstrap Anchor Sling
1240074 6’ Web lanyard with ez-stop & rebar hook $135.001385501 6’ Rope lanyard with 3600 lb. gated hooks $34.75AL308A6 6’ Rope lanyard w/AJ590A hook on one end $112.00
$4900 1341001• 3,600 lb gated hooks meeting ANSI Z359• Lightweight design• Limits fall arrest forces to 900 lbs. or less
6’ Rope Shock Absorbing Lanyard - 2 Snaphooks
• 5 Point harness• Single leg shock-pacl lanyard with 3600 lb
hooks
6’ Lanyard W/Shock Absorber & Rebar Hook
• Includes one self locking snap hook and two rebar hooks
• Limits fall arrest forces to 900 lbs. or less• 3,600 lb gated hooks meeting ANSI Z359
$7900 1340180
23St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
32A 32” Carpet mask applicator $124.00
DGRC 24” X 30” Tak Mat Refi ll - 4 Pads per pack $67.00
OSHA Danger Signs
47022 10” X 14” danger men working above $16.7547009 10” X 14” danger men working $16.7547010 10” X 14” danger no smoking $16.7572246 10” X 14” fl ammable materials $16.7574187 10” X 14” danger hard hat area $16.7547008 10” X 14” danger keep out $16.75
• Weatherproof on/off switch• UL & CUL listed• Includes heavy duty clamp and hook
• 800 Lumens, High Power LG LED’s• 90° angle light distribution• 100% die cast aluminum housing
$1750 L-845
$5000 08-00706
250W Halogen Clamp Light
24 LED Work Ligh with Stand
• Weatherproof on/off switch• UL & CUL listed• “S” stand with foam grip handle
$1675 L-33
500W Halogen Portable Worklight
• Weatherproof on/off switches• UL & CUL listed• Telescopes from 34” to 48” with “Easy Grip” locking
nuts
$4175 L-1719
500W Halogen Twin Head Worklight
• Heavy duty construction• Sled base and tripod base included• Telescopes from 40” to 76” with “Easy Grip” locking nuts
$7995 L-19
1200W Halogen 2-N-1 Twin Head
Tripod Light
SAFET Y SUPPLIES
JOB SITE SUPPLIES
$1675 TP-4$29900 CVR1036393
4” X 108’ PVC Threshhold Tape Cover Shield 36” X 393’ Fire Retardant Floor Protector
$5275 5J1193D
32” X 200’ Carpet Protection Sheeting
$4300 DGCRe-Usable Platform
With One 30 Layer Mat
24” X 30” Clean Room Mat
$650 265 X-Large 10 Pair Per Box
$5975 BLD38100
Non-Woven Shoe And Boot Covers
38” X 100’ Builder Board Surface Protection
• This patented system allows for safe and easy access to rooftops
• Easily attaches to most standard extension ladders• Made with high strength and lightweight aluminum• Makes compliance with OSHA’s ladder regulation a snap
$21900 10800
Safe-T Ladder System Lad-
der Rail Extension
• Protects metal thresholds during construction
• Stays fi rmly anchored yet removes cleanly
• 10 mil• Meets NFPA standards for
fi re retardancy• Easy to install and remove
• Tough 2 mil non-skid surface• Protects carpet for up to 30 days• A must for high traffi c areas
• Stop dirt and debris from being tracked into work area
• Made of breathable polypropylene• Thick non-skid soles
• Protect expensive fl ooring with the toughest, most durable paperboard on the market.
• Covers the same area as 10 sheets of masonite.
• 100% recyclable
Traffic Flag
18” X 18” Orange Flourescent Traffic Flag On 24” Dowel 150VF1824
As Low As
$255Each For 50 or more
First Aid Kits
$242568P25NUWAY
• 25 Person kit• Complies with OSHA• Plastic gasketed
68P50NUWAY 50 Person fi rst aid kit $46.75
Pennant Flagging
See Page 33 For Ladders
$625300667960 Ft Solid Color Flagging
3006683 Multi-color pennant fl agging 60 linear ft. $6.25
• High Noise Reduction Rating of 25 dB• Meets ANSI S3.19-1974 standard• Padded stainless steel spring wire headband maintains
constant pressure
$2599 00008860402
tains
Over The Head Orange Ear Muff
• Rugged, yet comfortable• Cut-retardant Engtex® material• Waist size expands from 30” to 42”
$9199 00008863202 Large
Chainsaw Protective Chaps
• Premium goat leather• Knit wristto keep debris from entering the glove• Breathable polyester back with protective knuckle strap
$1499 70108841126
rap
Work Gloves
75130 Shop towels on a roll 55 count 10.8” x 10” $2.9575090 Small box 85 count 10.8” x 10” $7.2575190 Large box 200 count one ply towels 10” x 14” $17.95
Disposable Shop Towels
Kerosene and Propane Available
Scott® Shop Towels are perfect for automotive and workshop tasks. Soft,
absorbent and strong, they’re also great for wiping hands and tools.
$3375WL088
$3350WL137
$4075WL139
$3125WL136
1” Thick Felt Leather Knee Pads
Hinge Knee Pads w/Hard Shell Cap
Knee Pad Super Soft/ Front Closure
Non-Skid Knee Pads
• Tough leather makes for long wear• 1” thick soft felt is held in by riveted
construction
• Hinge style• Extra cushion back with hard shell cap
• Protect knees with soft neoprene pad• Unique, easy to use front Velcro« strap
• Professional foam rubber hard shell knee pads• Contoured cap provides extra support and
comfort for heavy use
24 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
JOB SITE SUPPLIES
Shopmax™ Wet Wipes Hand Cleaner
$1575 192592 72 ct. bucket
• Pre-moistened, cloth like disposable wipes.• Special Hygienic Micro Emulsion Formula makes it tough
on dirt but gentle on skin.• Won’t leave a residue.
Safety Cans
• Galvanized steel Type-1 • Meets OSHA requirements • Approved by and listed by FM, UL, and ULC
F-15 Funnel for safety can $6.50U110S 1 Gallon red safety can $38.50U120S 2 Gallon red safety can $39.60U150S 5 Gallon red safety can Best Value $32.75U120SB 2 Gallon blue safety can for kerosene $39.60U150SB 5 Gallon blue safety can for kerosene $36.75U150SY 5 Gallon yellow safety can type 1 $36.751215 5 Gallon D.O.T. Approved type II with 7/8” fl ex hose $289.00
Canvas And Poly Tarps
A1020 10’ X 20’ Blue poly $9.50A1525 15’ X 30’ Blue poly $20.75A2030 20’ X 30’ Blue poly $27.75A2540 25’ X 40’ Blue poly $36.85S16X20 16’ X 20’ Silver/black poly $68.00S20X30 20’ X 30’ Silver/black poly $128.00S20X40 20’ X 40’ Silver/black poly $169.00100812 8’ X 10’ 10 oz. Canvas Made in USA $34.00101610 10’ X 16’ 10 oz. Canvas Made in USA $68.00162410 16’ X 24’ 10 oz. Canvas Made in USA $162.00202410 20’ X 24’ 10 oz. Canvas Made in USA $202.00
Additional Sizes Available
Brooms And Brushes
• Center rows coarse brown plastic and borders rows silver fl agged-tip plastic
• Recommended use: For dry sweeping smooth or rough fl oors that have heavy dust and dirt accumulations
• Length of trim: 3 inches
3724 24” Silver fl agged tip plastic broom $14.951024 24” Black tampico fl oor broom $17.502024 24” Black plastic bristle fl oor broom $15.501418 18” Prime stiff Palmyra fi ber garage broom $10.951436 36” Prime stiff Palmyra fi ber garage broom $24.251618 18” Heavy duty brown polypro street push broom $14.85567 7” White tampico paste brush $4.1540 8” Palmyra brush $2.953029 9” Truck brush - white poly bristles $13.75
$1595 3524
$3275 2224-AY
• 24” Polystyrene broom with scraper • Polystyrene material provides exceptional sweeping action • Fully assembled with handle brace, and steel scraper
Scraper attachment ideal for removing mud, gravel, paint, grease, gum and other debris
10 Gallon Wet/Dry Tough Poly Vac
$12900 9625010• 4.0 Peak HP• Airfl ow: 130 CFM• Heavy duty suctionIncludes: 1-1/2” X12’ economy lock on hose, (2) 1-1/2”
wands, 14” fl oor nozzle, blow molded crevice, claw
nozzle, high quality collection bag, and ultra web
fi lter
/2”
Propane Tanks
Concrete Curb Stops
Bollards, Top
Caps and Post
Sleeves
149-20 20 Lb. Propane cylinder refi llable tank $50.55149-30 30 Lb. Propane cylinder refi llable tank $59.55149-40 40 Lb. Propane cylinder refi llable tank $93.90
149CS1 6’ x 5” x 9” Curb stop 2 holes $31.50149CS7 7’ x 6” x 9” Curb stop 2 holes $62.00149CS8 8’6” x 10” x 12” Curb stop 2 holes $175.00
150684 6” X 84” Steel pipe bollard $85.00TOPGARD 6” Bollard Topgard Cap with setting bolt $24.001736 6” x 56” Yellow Plastic smooth bollard cover $54.00
Zinc Rich Galvanize
$1075 149141 13 OUNCE
• Contains 97% pure zinc metallic powder, which yields 94% zinc and 6% resin dry fi lm
• Stops rust and corrosion on any iron or steel surface• Meets performance requirements of MIL-P-46105, and DOD-
P-21035A
$990 02094 9 OUNCE• Designed to lubricate, waterproof and protect• Especially useful in lubricating metal to non-metal surfaces• Meets FDA Regulation CFR 21-178.3570 for incidental food
contact. NSF H1 Registered
Electrical Grade Silicone Lubricant
Sweeping Compounds And Oil Dry90815 50 Lb. “Wax” base, no grit, green fl uff y $42.501485000 50 Lb. Oil and sand base $14.758440 40 Lb. Thrifty-Sorb Multipurpose Floor Dry $9.50
Re-inforced Poly 12’ - 40’ X 100’ In-Stock
149100 Poly sheeting clip for 1”-1½” scaff olding $.996R20100 20’ X 100’ reinforced clear poly $80.0040F20100 4 Mil fi re retardent 20’ x 100’ poly $81.00
903-04-7 Cartridge fi lter $16.19905-80-2 Foam fi lter $ 5.69901-07 Dry pick-up disc fi lter (3-pack) $ 5.79
• Microfi nish™ Grip• Seamless cottonpolyester liner• Latex dipped• Twin pack• Available in blue also
857500 Leather Palm Gloves - Twin Pack $3.95
$107509K1300-L/XL
$89555AG317-L/XL
Nitrile Coated Glove With Safety Cuff
• Nitrile with Microfi nish grip• Seamless cotton liner, gray with safety cuff • Twin pack
y
$129556AG588-L/XL
• 6.5 Peak HP• Airfl ow: 185 CFM• Heavy duty suctionIncludes: 1-1/2” X12’ economy lock on hose, (2)
1-1/2” wands, 14” fl oor nozzle, blow molded
crevice, claw nozzle, high quality collection bag,
and ultra web fi lter
18 Gallon Wet/Dry Tough Poly Vac
$17900 9625310
Flashlights And Batteries
IN2-K 2 Cell D size industrial fl ashlight with krypton bulb $4.95IN3 3 Cell D size industrial fl ashlight $6.29ALAA-24 24 Pack “AA” Contractor Pack $11.50AL-AA or AAA 8 Pack “AA” or “AAA” cell alkaline industrial batteries $3.95AL-C 6 Pack “C” cell alkaline industrial batteries $4.95AL-D 6 Pack “D” cell alkaline industrial batteries $5.956V-HD 6 Volt heavy duty battery with spring terminals $2.95K2-2 or K3-2 Krypton high intensity bulb for 2 cell d-size or 3 cell d-size $3.00
p
25St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
CARPENTRY TOOLS
T500 5 Pc. T-shank assortment pack $10.33T101D 4” X 6 TPI fast cut wood - plastic $10.95T111C 4” X 8 TPI medium cut wood - plastic $7.33T101B 4” X 10 TPI hard and soft wood - plastic $10.95T119BO 3” X 12 TPI narrow curve cut wood - plastic $9.36T101AO 3” X 20 TPI fi ne cut wood - plastic $8.53T118BF 3” X 14 TPI wood with nails $14.86
• The most suitable blade made from carefully selected materials for every application
• World-wide market leader for jig saw blades• Compatible with DeWalt, Hitachi, Makita, and many others
Pro Series Circular Saw Blades With Case
Spade Bits
• Full cone threaded tip provides the speed needed to drill faster• Designed to answer the needs of professional users in terms of speed,
ease of use and hole quality.
DSB1001 1/4” Dare-Devil spade bit $2.75DSB1003 3/8” Dare-Devil spade bit $2.95DSB1005 1/2” Dare-Devil spade bit $2.95DSB1009 3/4” Dare-Devil spade bit $3.15DSB1015 1-1/8” Dare-Devil spade bit $5.25DSB5006P 6 Pc. Dare-Devil spade bit set 3/8” - 1” $21.95SBE1006 6” Spade bit extension for rapidfeed bits $4.54DSBE1012 12” Spade bit extension for rapidfeed bits $5.75
FB1600 16 Piece bit set with case ¼” thru 2-1/8” $135.00FB004 ¼” Forstner bit with 3/8” shaft $11.15FB008 ½” Forstner bit with 3/8” shaft $15.50FB016 1” Forstner bit with 3/8” shaft $19.50FB024 1½” Forstner bit with 3/8” shaft $30.75FB034 2-1/8” Forstner bit with 3/8” shaft $49.50
Call For Additional Sizes
Hammers And Saws
$257551-402 22 oz.
• Checker face design provides nail grip• Magentic nail starter for one-handed nail setting• Head design for larger striking surface
Fatmax® Checkered Face Straight Claw
51-944 20 oz. Anti-vibe forged steel rip claw, smooth face $25.8551-947 20 oz. Anti-vibe forged steel rip claw, checkered face $29.10
15-087 20” Sharp-tooth saw 9 points per inch $21.8015-106A 6-3/8” Coping saw with 3 blades $7.2515-059 Replacment coping saw blades $2.35
$190015-335
• 50% faster than conventional handsaws• Resharpenable teeth • Comfortable select hardwood handle with special 45°/90° square/mitre
feature built in
20” Sharptooth™ Handsaw
$1305 46-123
• Durable etched, hard chrome plated blades• Scriber for easily marking surfaces• Easy read vial
12” Combination Square
$43510-509
• For cutting and trimming vinyl or linoleum fl oor covering, roofi ng and similar material
• Heavy duty strike caps• Durable precision ground cutting edge• Width identifi cation on handle
3 Piece FatMax® Short Blade Chisel Set
16-971 6 Pc. Fatmax chisel set, 1/4” - 1½” with case $65.5016-980 1-1/2” Fatmax Wood Chisel $14.00
$85055-033
• Special extracting claw• Heat treated• Beveled nail slot
Nail Claw
55-035 11” Double end nail puller $13.93
$345555-099
• 4-in-1 tool for prying, splitting, board bending and striking jobs• Two-tiered jaws for grabbing common dimensional lumber & decking
Fatmax® Xtreme™ Fubar™ Functional Utility Bar
$112555-525
• Extra long length for extra reach and more leverage• Arch in center of bar gives more swing during nail pulling• Works as a panel lift
Super Wonder Bar Pry Bar
55-045 7” Wonder bar II pry bar $3.9855-102 24” Fatmax® wrecking bar $13.5555-104 36” Fatmax® wrecking bar $16.4555-136 36” Wrecking bar $9.2755-515 12” Stanley wonder bar $8.7555-818 17” Ripping bar $12.25
$625 58-501
• 1/32” and 2/32” included• Accepts conventional screwdriver bits• For setting unhardened nails
FatMax® Cushion Grip Interchangeable Nail Set
$209545-011
• Brace measures octagon scale• Board measures 2 way read sleeve• Surface protected to resist corrosion
Premium Aluminum Rafter Square
45-013 Folding layout square for 90° & 45° angle $27.7545-300 Aluminum carpenter square $10.0945-910 24” X 2” steel rafter/roofi ng square $10.25
46-131 16” Combination square $15.05
$1325 46-053
• Rafter layout square with our exclusive adjustable arm • Ideal for marking repetitive cuts accurately• Common/Jack and Hip/Valley scales
Premium Adjustable Quick Square® Layout Tool
$2925 20-531
• One piece durable, die-cast metal body for prolonged life• Thumb-dial adjustable tension mechanism with quick change features • 4-3/4” cutting capacity
Fatmax® High Tension Hacksaw
SDH1 1/8” - 1/2” Step drill with 1/32” increments $22.00SDH3 1/4” - 3/4” Step drill with 1/16” increments $40.00SDH9 13/16” - 1-3/8” Step drill with 1/16” increments $102.25
$82910-779
• Cushion grip surface for comfort, even in extreme temperatures• Slip-resistant grip helps prevent slipping, even on angled surfaces• Patented interlocking nose secures blade
5-3/8” Dynagrip® Retractable Utility Knife
10-499 6” Quick change retractable utility knife $7.0010-049 Pocket knife with blade lock $7.5510-099 3 Position retractable knife w/3 blades $5.0010-209 #199 Fixed blade utility knife $6.6011-041 Replacement knife blade for 10-049 $2.6011-921 Heavy duty utility blade 5 ct package $1.5711-931 Extra heavy duty utility blade 5 per package $1.7511-961 Hook blades 5/pkg .025 Thick blade $5.25
$590 21-399
• One handed tool• Ideal for end-grain work, sheetrocking and smoothing edges of laminates• Fitted with a replaceable fi ne cut blade
6” Surform® Pocket Plane
21-398 5-1/2” Surform® fi ne cut replacement blade $3.70
• Virtually unbreakable fi berglass handle • Factory balanced for maximum striking power • New grip material reduces handle slickness
24 oz Fiberglass Brick Hammer
$1750 11-428
• Fiberglass handle with comfortable cushion grip• Permabond® construction between head and handle • 1 1/8”- wide bit
24 oz Fiberglass Ball Pein Hammer
$2395 11-421
• Rust-resistant, forged black head with polished poles and peins • Permabond® construction between head and handle • Comfortable black cushion grip
11-400 20 oz premium fi berglass curve claw hammer $19.2511-402 16 oz premium fi berglass curve claw hammer $17.8511-415 16 oz premium fi berglass rip claw hammer $17.8511-416 22 oz premium fi berglass rip claw hammer $21.7511-422 15 oz fi berglass brick hammer $23.75
• Quick-Change jaw quickly converts from clamp to spreader
• Exerts up to 250 lbs. of clamping pressure
• Non-marring pads grip fi rmly and protect work
506QC 6” Quick grip bar clamp w/bar spreader $24.25512QC 12” Quick grip bar clamp w/bar spreader $29.75524QC 24” Quick grip bar clamp w/bar spreader $33.5040104 4 Piece accessory kit $9.55
2-1/4” Quick Adjusting Pipe Wrench• One-handed operation • Ratchets quickly to work surface • 43% less weight than standard 14” cast iron pipe
wrenches
274101 10” Cast iron pipe wrench $19.50274106 12” Cast iron pipe wrench $24.50274102 14” Cast iron pipe wrench $25.25274103 18” Cast iron pipe wrench $31.75274104 24” Cast iron pipe wrench $45.50274107 36” Cast iron pipe wrench $93.75
$2550 274001
• Easy-spin adjusting nut is heat-treated for durability
• Hardened teeth provide tremendous bite • Housing constructed of heavy-duty cast iron
• 16” Hickory handle• Punch diameter: .075”
24606 41 Pc tap and die super set $137.0026317 41 Pc tap and die set $153.0026376 76 Pc. Metric & sae tap and die set $257.00
Taps And
Dies
• Wide capacity jaw • Wider handle provides more comfort
and less stress to the hand • Alloy steel and heat treated
Contractor Bit SetsDW2169 38 Pc. Hex bit set with magnetic bit holder in case $59.38
Power Drill I-100 Auger Bits
Cast Iron Pipe Wrenches
One-Handed Bar Clamps/Spreader
Chrome Finish Adjustable Wrneches
Flat-Steel Fish Tapes
1/8’’ Wide Steel Fish Tape - 125’
• High strength spring steel• Laser etched markings in 1’ increments• Unique sloped handle optimizes hand position
for quick hand-over-hand rewinds.
$5650 56003
56004 1/8” x 240’ fl at steel fi sh tape with sloped handle $78.85
Hex Key Wrench Sets
3/16” - 3/8” Five-Key Inch Folding Hex-Key Set
• Handy sets fi t your pocket or tool box easily and help eliminate the lost-key problem.
• Tough, heat-treated alloy steel.• Hex-key ends are square-cut for a secure full-
depth fi t and maximum contact
$1125 70579
70583 3/32” - 1/4” Eight-key inch folding hex-key set $11.2570591 5/64” - 1/4” Nine-key inch folding hex-key set $9.25
1150300 1” Diameter back-out punch with 16” hickory handle $33.95
48-22-3069 6 in 1 Combination pliers, 1-1/2” jaw capacity, wire stripper, bolt cutter and pipe reamer $33.50
16 oz Fiberglass Curved Claw Hammer
3/4” Diameter Heat-Treated Back-Out Punch
$1455 S16F
$3175 1150000
Patented hollow core handle absorbs shock and provides superb balance
TTC1HC 16 Oz titanium hammer with replaceable milled face $104.95RCM1 Mill face replacement cap for titanium hammer $17.95
p
• Box-joint, forged alloy, hardened and tempe• Jaw capacity 16 penny nail
• Virtually unbreakable fi berglass handle• Factory balanced for maximum striking• New grip material reduces handle slick
• Comfortable black cushion grip
y
d for
bite ast iron
As Low As
$655Each for 50 or more
DW3578
See Page 23 and 24 For More Masonry Tools
$95552361-20
M18™ LED Flood Light
• Flood Light provides 1,100 lumens and up to 1,300 lux• Up To 30% brighter than corded 250 halogen lights• Up To 8 hours of run-time
$245548-22-5125
25’ Magnetic Tape Measure
• Up to 9’ Standout• Blueprint Scale - Calculates 1/4” and 1/8”
Drawings• 5-Point Reinforced Frame
28 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
HAND TOOLS AND EQUIPMENT
1-1/8” Tubing Cutter
$3850 TC118
• 1⁄8” - 11⁄8” Tube diameter range• Four roller tracking system• Cleanly and easily deburr pipes
1-3/8” Tubing Cutter
$5550 TC138
• 1⁄8” - 11⁄8” Tube diameter range• Four roller tracking system• Cleanly and easily deburr pipes
2 Piece Fatmax® Xtreme™ Demolition Driver Set
$1860 67-546
• Cold-formed steel strike cap withstands striking blows• Thru-tang bar transfers strike-force from strike cap to tip• Shatter-resistant bar designed for striking and prying
¾” Bailey® Pipe Clamp
$2495 83-097
• Extra-wide and tall bases achieve stability and knuckle clearance• Machined jaw faces evenly distribute clamping pressure• Durable cast-iron and steel construction
4½” Utility Workshop Vise With Swival Base
$9900 674
• Heavy-duty 30,000 PSI casting for strength and durability• Built-in pipe jaws handle various pipe sizes• Perfect for general clamping applications
3” C-Clamp
$1150 540A-3
• Frames made from high strength ductile iron castings
• Sliding pin (vise type) handle, single acme thread rolled spindle and oscillating ball and socket tip
Utility Workshop Vises
675 5½” Utility workshop vise with swival base $125.00676 6½” Utility workshop vise with swival base $165.00
• The no-slip ProTouch™ grip provide comfort and leverage• Ideal for tightening, clamping, twisting and turning• Constructed of high-grade heat-treated alloy steel
$1250 10R 10”
The Original™ Straight Jaw Locking Pliers
9LN 9” Long nose locking pliers $16.50
• Heavy-duty jaw grips around work of all shapes; ideal for plumbers, mechanics, welders, and others working with large objects
• Ideal for tightening, clamping, twisting and turning• Constructed of high-grade heat-treated alloy steel
$2050 12LC 12”
The Original™ Large Jaw Locking Pliers
6BN 6” Bent nose locking pliers with wire cutter $17.707LW 7” Vise Grip locking wrench 7/16”-3/4”/11mm-19mm $14.50
GFCI Power Block Adapter w/Lighted Power Block• Features a power indicator light in the female receptacle• Lightweight and stays fl exible to -67°F. • Meets OSHA requirements for Outdoor use.
• Resists moisture, abrasion and prolonged exposure to sunlight• UL/cUL/ETL Listed / Meets OSHA requirements forOutdoor use• Outer jacket won’t mark fl oors or walls
• Clear molded plugs with power-indicator light in female end
• Reinforced blades help prevent accidental bending or breaking
• UL Listed /CSA Certifi ed / Meets OSHA requirements for Outdoor use
• Bump fi re/sequential operation• Precise depth of drive adjustment • Work Light
Flooring Cleat Nailer
$61900 MIIIFN
$43055 FN65DA
Visit Our Website For More Nails And Staples
Rental Rates (MIIIFN)
Daily Weekly Monthly
$35 $140 $350
0090AC 18” Series 2000 bolt cutter 3/8” capacity $52.500190AC 24” Series 2000 bolt cutter 7/16” capacity $71.500113AC 24” Replacement cutter head for series 2000 $32.25
• Clear staple jams without use of tools• Quick-load magazine• 1/4” - 3/8” fasterners
Powercrown™ Hammer Tacker
$4195 H30-8
• AntiJam™ design for maximum productivity• 1/4”-1/2” STCR5019 PowerCrown™ staples• Extra wide foot plate prevents tearing and marring
Powerslam™ Professional Hammer Tacker
$5900 PC2K
Rental Rates (MIIIFS)
Daily Weekly Monthly
$35 $140 $350
• Drop-forged jaws with center-cut blades • Cuts soft, and medium/hard materials • Toggle joints turn 50 lb hand pressure to 4000
lb of cutting pressure
14” General Purpose Center Cut Bolt Cutter
$4600 1490AC 5/16” CAPACITY
• Fastrac ratchet suspension• Meets or exceeds the applicable
requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1-2003, Class G (electrical, low voltage).
$9850 475407 NATURAL TAN
Skullgard Protective Headwear
0390MCX 36” Heavy duty bolt cutter 7/16” capacity $217.750590MCX 42” Heavy duty bolt cutter 1/2” capacity $258.75
• Recommended for the most demanding hand cutting applications • Maximum hardness of material to be cut: Brinell 455/Rockwell C48 • Toggle joints turn 50 lb hand pressure to 4000 lb of cutting pressure
24” Heavy Duty Center Cut Bolt Cutter
$15925 0190MCX 5/16” CAPACITY
Tool Holders And Bags
5459T Leather erection wrench holder $18.505107-9 Leather plier holder for 9” side cut pliers $23.255109 Wide opening straight wall canvas bucket $43.505113 Tapered wall canvas bucket $44.255118C Leather 4 pocket tool holder $62.505119 4 Pocket tool pouch $20.255139 Canvas zipper bag 7” x 12-1/2” $10.255417T Leather bull pin holder with tunnel loop $17.255458 Snap loop with snap hook $11.505461T Erection wrench holder $19.855471 Canvas electrode bag $18.75
27400 Aluminum tie wire reel $47.8527450 Leather tie-wire reel pad $16.25
Drift Pins, Wrenches And Connecting Bars
3260 11/16” Barrel-type drift pin $6.853262 15/16” Barrel-type drift pin $7.853255 1-1/4” Broad-head bull pin $21.853256 1-1/16” Broad-head bull pin $21.853248 7/8” X 30” round connecting bar $49.753247 3/4” X 24” round connecting bar $36.953246 7/8” X 36” round connecting bar $54.653245 3/4” X 30” round connecting bar $44.003210 1/2” Erection wrench, for u.S. Heavy nut $36.253212 3/4” Erection wrench, for u.S. Heavy nut $42.953222 3/4” Erection wrench, for u.S. Regular nut $42.953239 Adjustable-head construction wrench $82.95
Side Cutter Pliers
213-9ST 9” Ironworker’s work pliers $38.15D2000-7CST 7” Ironworker’s work pliers $47.50D2000-9NE 9” High-leverage side-cutting pliers $43.85D2000-9ST 9” Hi leverage ironworker’s work pliers $50.50D201-7CST 7” Side cutting pliers $38.50D213-8NE 8” High-leverage side-cutting pliers $34.50D213-9NE 9” High-leverage side-cutting pliers $33.95D213-9ST 9” Hi leverage ironworker’s work pliers $38.25D2207 7” HD diagonal-cutting pliers-tapered nose $29.95D502-10 10” Pump pliers $23.75
• Off ers maximum space and organization in a compact unit• Tote tray holds larger tools and accessories• Large tub for big power tools
Hi-Viz 3-Tier Tool Box
$4075 54700
• Lid has no-slip surface and is strong enough to stand or sit on • Top tray has compartments for small tools and parts • Large tub for big power tools
• 1100 PSI, 2.0 GPM• 1.5 hp Baldor electric motor• 30 ft. hose with 36” wand
$80000 1115EW1COM
Gas Powered Pressure Washers
• 4000 PSI , 4.0 GPM• 13.0 HP Honda engine• 50 ft. hose with 36” wand• Stainless steel frame
$122500 PE4013HWPSCOMZ• 3500 PSI, 4.0 GPM• 13.0 HP Honda engine w/ low oil shutdown• 50 ft. hose with 36” wand• Stainless steel frame
$176000 CD-3513HWBSGEN
Electric Powered Pressure Washer
Accessories
• 31.8 cc engine• 16” bar and chain• Quick chain adjustment
$19999 MS180CB-16
Rental Rates (MS290-18)
Daily Weekly Monthly
$50 $175 $360
• 130 CFM• 3 cylinder diesel• 100 PSI working pressure
Rental Rates (PDS130S)
Daily Weekly Monthly
$75 $250 $625
130 CFM Air Compressor
Rental Rates (PDS185S)
Daily Weekly Monthly
$95 $335 $850
Rental Rates (PDS400)
Daily Weekly Monthly
$165 $575 $1450
185 CFM Air Compressor
400 CFM Air Compressor
Mini-Boss
• 56.5 cc engine• 18” bar and chain• Adjustable automatic bar and
chain oiler
$38999 MS290-18
Farm Boss
• 27.2 cc engine• 417 CFM air volume w/tubes• 140 MPH air velocity
$14999 BG55
Rental Rates (BR550)
Daily Weekly Monthly
$45 $160 $400
• 64.8 cc, STIHL 4-mix engine• 530 CFM air volume w/tubes• 199 MPH air velocity
$44999 BR550
1/2” Gas Wood Drill
Chainsaws
Blowers
• 27.2 cc engine• 1” X 18” wood bit capacity• 2 speed gear box
$49999 BT45
• 15.7 HP Kubota diesel engine• 700 lbs. operating capacity• Great for small residential
remodeling jobs
Rental Rates (463)
Daily Weekly Monthly
$159 $625 $1595
463 Skid Loader
36” And 44”
Wide Setup
• 1” NPT inlet and outlet• 20 cc Mitsubishi engine, 2 cycle engine• 29 GPM, 26’ maximum lift
$29050 SEM-25E
1” Dewatering Pump
• 2” NPT inlet and outlet• 5.5 HP GX160 Honda engine• 185 GPM, 26’ maximum lift
$96000 KTH50X
• 2” NPT inlet and outlet• 4.0 HP GX120 Honda engine• 150 GPM, 26’ maximum lift
$54400 STH50X
2” Trash Pump
Semi-Trash Pumps
• 3” NPT inlet and outlet• 5.5 HP GX160 Honda engine• 240 GPM, 26’ maximum lift
$91000 STH80X
See Page 8 And 23 For More Stihl
KTH100s 4” Trash pump 541 GPM $1932.40
85400061 16” Water broom for pressure washers (4 tips) $30.5085205024SHD 24’ Super heavy duty ext. wand with harness $163.502000WAWS 20” Stainless steel Whirl-A-Way $550.00
d engingggggg e
Mini-Boss
ar and
Farm Boss
es
y
Bit Sold Separately
4-Cycle Rammer
Remote Controlled Reversible Vibratory Plate
Don’t Forget The
Suction and Discharge
Hoses
Ask About Chain
and Case Special
32 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
CONSTRUCTION EQUIPMENT
Trash Pumps
• 21 HP Lombardini diesel engine• Dynamic (centrifugal) force:
7,700/15,400 LB.• Cable and infrared control from on
compact, lightweight, hand held unit
33” Articulated Sheep Foot Trench Roller
Rental Rates (RT82-SC)
Daily Weekly Monthly
$225 $780 $2100
SV4 Clamp for external vibrator use on wood/steel ply forms $315.00
SV5 Clamp for external vibrator use on steel forms $315.00
FUE6/042/220WC Electronic converter for the external vibrator system $6420.00
Rental Rates (EH27)
Daily Weekly Monthly
$55 $180 $460
$338900 BS602I
• 5.5 HP Honda engine• Large capacity water tank• For compaction of granular materials
and mixed materials
Rammer
$214900 WP1550AW
Plate Compactor
Rental Rates (BS602I)
Daily Weekly Monthly
$50 $175 $405
• 3 HP engine• Oil injected• 3025 lb. force
• 4.8 HP Honda engine• 2500W max output• Low oil shut-off
$120500 0620128
• 11 HP Honda engine• 5600W max output• Includes wheel kit
$214900 GP5600A
• 115V 15AMP electric motor• Quick change tool holder accepts 1-1/8” hex X 6” shank• Special vibration dampened protective hood and low
recoil air cushioned percussion system
$192500 EH27
• 5.5 HP Honda engine• 36” ring diameter• 4 blades• Handle sold separately
$196900 CT365A
• 8 HP Honda engine• 425 GPM discharge• Self priming high performance pumps
for water and solids
$159900 PT3A 3” CENTRIFUGAL
RENTAL RATES (WP1550AW)
DAILY WEEKLY MONTHLY
$50 $175 $405
• 5.5 HP Honda engine• 205 GPM discharge• Self-priming high performance pump
capable of handling solids up to 1 inch
$134900 PT2A 2” CENTRIFUGAL
Portable Generators
• 8 HP Honda engine• 3800W max output• Automatic Low oil shut-off
$168500 GP3800A
Breakers
PRICE ON REQUEST RT82-SC
• Standard centrifugal force 780.1 lb.• Variable vibrations up to 6000 rpm• Can be connected directly to 1-phase
power source• Clamp sold separately
$300500 ARFU 36/6/115
$105100 1415216
• D-handle drop forged handle• 2 bolt head design• 4” stroke
Model 133 Rivet Buster
$43100 1866804
Chipping Hammer
Rental Rates (1415216)
Daily Weekly Monthly
$35 $125 $315
• Deep case-heardened alloy steel cylinder• Heavy duty upper and lower sleeves• 8” stroke
Rental Rates (1415302)
Daily Weekly Monthly
$15 $55 $145
• Automatic valves• Drop forged alloy steel handles• Built-in large automatic oiler
$84500 1415235 60LB. CLASS
Model 160 Paving Breaker
Rental Rates (1415235)
Daily Weekly Monthly
$25 $75 $225
• Built-in large automatic oiler• Flapper valve design allows dirt to pass without
stopping the tool• Internally reinforced 5-3/4” malleable iron butt
$85900 1415214
Model 131 Backfi ll Tamper
Rental Rates (1415199)
Daily Weekly Monthly
$20 $75 $210
• Built-in large automatic oiler
$165600 1415229
Model 155 Rock Drill Dry
Rental Rates (1415229)
Daily Weekly Monthly
$45 $160 $400
• Built-in large automatic oiler• Class 1-1/8” hex bit• Drop forged alloy steel handle
$96900 1415237
Model 180 Paving Breaker 90#
Rental Rates (1415237)
Daily Weekly Monthly
$25 $75 $2251415199 117 Paving breaker 30# class 7/8” x 3-1/4” $885.00
Moil Point 1-1/8” Shank
1421019 1-1/8” X 6” x 14” moil point $22.501421020-2 1-1/8” X 6” x 24” moil point $29.501421020-3 1-1/8” X 6” x 36” moil point $45.00
Narrow Chisel
1421030 1-1/8” X 6” x 14” narrow chisel $22.751421031-2 1-1/8” X 6” x 24” narrow chisel $29.501421031-3 1-1/8” X 6” x 36” narrow chisel $45.001420923 7/8” X 3-1/4” x 14” narrow chisel $18.75
3” Chisel1-1/8” Shank
1421040 1-1/8” X 6” x 14” chisel $29.50
5” Asphalt Cutter 1-1/8” Shank
1421045 1-1/8” X 6” x 11” - 5” asphalt cutter $68.50
Ground Rod Driver 1-1/8” Shank
1421806 1-1/8” X 6” GROUND ROD DRIVER- 1” CAPACITY $85.25
Bushing Tool 1-1/8” Shank
142848 1-1/8” X 6” bushing tool $78.50
Electric External Vibrator
Walk Behind Trowels
0165465 Adjustable twist pitch handle $425.00CT488A 48” Walk behind trowel - handle not included $2360.00
g Breaker
Breaker 90#
Large Selection of Air Hoses AvailableSee Page 34 & 36 For Air Compressors
33St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
Portable Generators
• 5.5 hp Honda engine • Produces up to 2.2kW continuous output • 2,500 maximum watts
$119900 GA25H
Diaphragm Pumps
High Cycle Generator
Trash Pumps
• 8.0 hp Honda engine • Produces up to 3.2kW continuous output • 3,600 maximum watts
$225000 GA36HB
• 11.0 hp Honda engine • Produces up to 5kW continuous output • 6,000 maximum watts
$247900 GA6HB
• 18.0 hp Honda engine • Produces up to 8.4kW continuous output • 9,700 maximum watts
$419900 GA97HE Battery sold separately
• 11.0 hp Honda engine • Produces up to 3.6kW continuous output • 5,000 maximum watts
$325000 GDP5HA
Wheel Kit
$250.00Item # UWKB
Wheel Kit
$250.00Item # UWKB
Wheel Kit
$250.00Item # UWKB
Wheel Kit
$250.00Item # UWKB
• 4.0 hp Honda engine • 3000 GPH, 25 ft. max lift• 2” suction and discharge
Ask AboutPurchase OptionsMQD206H• 4.0 hp Honda engine • 5100 GPH, 25 ft. max lift• 3” suction and discharge
Ask AboutPurchase OptionsMQD306H
Centrifugal Pumps• 3.5 hp Honda engine • 8520 GPH, 25 ft. max lift, 115 ft of head• 2” suction and discharge
$51500 QP2H
• 5.5 hp Honda engine • 6,360 GPH, 25 ft. max lift, 246 ft. of head• 2” suction and discharge
• 5.5 hp Honda engine • 14,700 GPH, 25 ft. max lift, 105 ft. of head• 3” suction and discharge
$74500 QP303H
• 5.5 hp Honda engine • 211 GPM, 42 psi max pressure• 2” suction and discharge, solids up to 1”
$114500 QP2TH
• 8.0 hp Honda engine • 396 GPM• 3” suction and discharge, solids up to 1.5”
$134900 QP3TH
• 11.0 hp Honda engine • 555 GPM• 4” suction and discharge, solids up to 2”
$249500 QP4TH
Submersible Trash Pumps
• 37 ft maximum head • 73 GPM• Automatic thermo-overload protection
$32000 ST2037
• 40 ft. maximum head • 79 GPM• Automatic thermo-overload protector
$33000 ST2040T
Plate Compactors
• 4.8 hp Honda engine • Plate size: 19.7” x 20.7”• Centrifugal force: 3450 lbs.
$219900 MVC88VGHW
• 4.8 hp Honda engine • Plate size: 17.7” x 22”• Centrifugal force: 3080 lbs.
20060 4-1/2” X 1/4” x 7/8” metal grinding wheel $2.7520160 4-1/2” X 1/4” x 5/8” - 11 T-27 with hublock $5.2522030 4-1/2” X 1/8” x 7/8” T-27 pipeline cutting wheel $2.7520170 5” X 1/4” x 5/8” - 11 a24n metal grinding wheel $5.0023327 6” X .045 X 7/8”abrasive cut-off wheel for metal $2.7522046 6” X 1/8” x 5/8” - 11 pipeline cutting wheel $6.5020085 7” X 1/4” x 5/8” - 11 T-27 metal cutting wheel $6.7523246 8” X 3/32” metal abrasive cut-off wheel $4.7520096 9” X 1/4” x 5/8” - 11 T2 metal cutting wheel $8.7524000 10” X 1/8” x 5/8” metal cutting wheel $10.7523410 12” X 1/8” x 1” metal cutting wheel $8.2024031 12” X 3/32” x 1” iron worker abrasive blade $8.0023450 14” X 1/8” x 1” metal cutting wheel $17.0024051 14” X 3/32” x 1” iron worker abrasive blade $10.25
Closed Coat
Aluminum
Oxide Belts14457201 3” X 21” 36 grit sanding belt $12.2514457203 3” X 21” 50 grit sanding belt $23.0014457204 3” X 21” 60 grit sanding belt $21.7514457205 3” X 21” 80 grit sanding belt $21.0014457206 3” X 21” 100 grit sanding belt $20.0014457207 3” X 21” 120 grit sanding belt $20.0014457209 3” X 21” 180 grit sanding belt $20.00
• 8.0 AMP motor• Precision angle bends• Uniformly bends up to No.5 (3/8”, 1/2”,
5/8”) Grade 60 rebar
4-1/2” Disc Grinder
Rebar Cutter Bender
/8”, 1/2”,
$9400 G12SE2
$227500 VB16Y
Miscellaneous Tools
Worm Drive
Saws
• 15.0 amp• Depth of Cut at 45 Deg. 1-15/16”• Depth of Cut at 90 Deg. 2-3/8”
• 15.0 amp• 53° bevel allows users to complete a wider
variety of cuts• Weighs only 13.2 lbs.
$17955 SHD77
$21900 MAG77LT
7-1/4” “Old Style” Worm Drive
7-1/4 in. MAG77LT Worm Drive SKILSAW®
3-1/2” Clipped Head Framing Nailer
$29900 NR90AD
• Perfect for multi-purpose sanding projects• Industrial strength• Hook and loop backing with 8 holes
Buy 10 or More Blades and Save
• Heavy duty for tougher applications• High pressure is ideal for removing deeper scratches from the work surface• Made with premium zirconium abrasive material which provides long-life and
high stock removal
As Low As
$600
Each for 10 or more
Blowout
Price
While Supplies Last
35St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
POWER TOOLS
CRCT1 Circle cutter 3-1/2” to 14” capacity $20.62XB-DC1 1/4” Carbide cement board/plaster duracut bit $17.35WD1 1/4” Window and door drywall bit 1/pk $7.25GP16 1/8” Guide point for clean cuts in drywall 16/pk. $10.80XB-MP2 Multi-purpose x-bit - 2 per pack $11.54XB-TC1 Tilecut x-bit - 1 per pack $13.07XB-DW2 Drywall x-bit - 2 per pack $10.97ZDEZ36 3-1/2” Fiber disc 36 grit 2 per pack $4.94ZDEZ50 3-1/2” Fiber disc 50 grit 2 per pack $4.94ZDEZBT120 3-1/2” Fiber disc 120 grit 2 per pack $5.78
• 1/2” Hammer Driver-Drill - 450 in. lbs. of torque• 6-1/2” Circular saw• Impact Driver - 1,330 in. lbs. of torque• Flashlight, charger, 2 batteries and bag
18V LXT Lithium-Ion 4-Pc. Combo Kit
$43555 LXT405
• 3.5 amp motor• 0 - 2,000 Impacts per minute • Maximum fastening torque of 260 ft. lbs
1/2” Drive Impact Wrench
$20955 TW0350
ch
• 9.0 amp motor • 0 - 2,800 Strokes per minute • 1-1/8” stroke
Variable Speed Reciprocating Saw
$8955 JR3050T
Impact Wrenches
Variable Speed Reciprocating Saw
$19955 JR3070CT
• 15.0 amp motor • Cuts 4-1/2” Round Stock at 45° and 90° • Adjustable depth stop
14” Portable Cut-Off Saw
$16555 2414NB
aw
• Bevel cuts 0-45° • 15.0 amp motor • Two built-in L.E.D. lights illuminate the line of cut
7-1/4” Circular Saw With LED Lights
$10555 5007F
• 15.0 amp motor • Cuts 1-3/4” at a 45° Bevel • Electric Brake
7-1/4” Magnesium Circular Saw With LED Lights
$17955 5007MGA
t
D Lights
• 10.5 amp motor • 11,000 rpm • Electric brake for maximum productivity
5” Angle Grinder
$12955 GA5020
• 7.9 amp motor • Soft-Start feature for smooth start-up • Pre-setting dial (2,000 – 4,000 RPM) for optimum
rotating speed
4” Electronic Wet Stone Polisher
$32555 PW5001C
Nibblers and Shears
Corded Drills
10 Gauge Shear
16 Gauge Nibbler
3/8” Angle Drill
$38955 JS3200
$29955 JN1601
$22455 DA3010F
Grinders And Sanders
• 7.0 amp motor, 0-1,100 RPM• 0-4,500 BPM• 40 bit angle settings for chiseling
1” D - Handle SDS Rotary Hammer With Bonus Grinder
• Powerful 9 Amp motor delivers 129 CFM of airfl ow for maximum suction• Automatic Filter Clean• Power Tool Actuation controls the On/Off operations of the vacuum with
a power tool
$59555D27904
D25301D Telescoping dust extractor with hose for SDS rotohammers $97.50
Don’t Forget The Filters
39St. Louis
(314) 544-1214 (800) 542-1214
Jeff erson City(573) 893-8786(800) 345-9154
Jackson(573) 204-0100(800) 599-9854
Wentzville(636) 327-8877(888) 999-6883
Troy, IL(618) 288-3400(888) 315-1100
DRYWALL TOOLS
6” Wall Board Saw
$480 15-206
• 6” blade length• Designed especially for plasterboard• Self-starting point sharpened for plunge cuts
6” Cushion Grip Wall Board Saw
$650 15-556
• 6” blade length• Ergonomically designed curved handle• Sharp tip for plunge cuts
Cushion Grip Multi Saw
$925 20-220
• Works with standard reciprocating sw or hacksaw blades• Ideal for sawing in tight spaces• Ergonomically designed, curved handle is cushioned for comfort and
prolonged use
Tri-Fold Plaster Saw
$3325 3636
• Accepts standard recip blades
14 Ounce Drywall Hammer
$3475 E3-11
• Nylon-vinyl grip• For scoring drywall
7” Tapered Bucket Trowel
$1425 PL800
$39500 0063061423YE
Wallboard
Panel Lift
$93600 2315
• 150 LB. capacity• 15’ height• Up to 4’ x 16’ wall board capacity• Two speed winch handle
• 2 Swivel and 2 locking swivel casters• 23” x 49” x 46”• 3000 lb. capacity
$325 TG1• Unbreakable• Spackling, scraping, spreading, stripping, and roller cleaner
2” X 60 Yard Blue Painters Masking Tape
$1075 2090• Can be used for masking on glass or surfaces
exposed to sunlight• Solvent and moisture resistance
12 X 5-1/4 Drywall Board Lifter
$1825 790
• Designed for easy use• Self-righting features• Non-slip checkered surface to provide foot traction
801 Drywall roll lifter $15.00
Heavy Duty Drywall T-Square 47-7/8 X 22
$2425 27HD
• Notched head• Reverse rulings• Stud markings all for quick, accurate cuts
RIGHT HANDED TAPESHOOTER DRYWALL TAPER
$14300 798D
• One-handed mud loading• Precision mud fl ow control is easy to adjust• Made from lightweight aluminum
3 10 X 10 aluminum hawk with durasoft handle $17.001 13 X 13 aluminum hawk with durasoft handle $19.7531 Drywall tape reel $9.50812 12” Stainless steel drywall mud pan $13.50
12 oz Drywall Hammer With 16” Handle
$3200 800
• Lightweight and perfectly balanced• Properly rounded and checkered head• Wedge shaped steel blade is notched underneath and
doubles as a nail puller
Sharpshooter Hopper Gun
$9400 693
• Angled hopper allows user to spray ceilings and walls• Gun features a handy air control valve• Seven orifi ce sizes with tubular design for reduced
overspray and greater texture variety
5 X 3-3/4 Drywall Thin Coat Coner Trowel
$1125 24D
• Lightweight tool made from one piece of fl exible stainless steel
• Hardened cutter wheel and center pin will remain sharp indefi nitely
Drywall Circle Cutter - 16” Capacity
$835 29
• Measures accurately on the calibrated steel shaft
• Hardened cutter wheel and center pin will remain sharp indefi nitely
1/2 Sheet Drywall Hand Sander
$1100 20D
• Used for sanding drywall joints• Designed for pre-cut or a half sheet of standard
sandpaper• Lightweight
26A Universal drywall pole sander with out handle (handle #m28 required) $18.50
M28 48” Handle for pole sander $7.0028” Quick Mix®
$1475 819
• Saves time and energy• Fits any 3/8” or larger slow speed drill (500 rpm)• Blade measures 8-1/2 x 4-1/28” Blue Steel Taping Knife With Durasoft Handle
$950 3508D
• Resilient DuraSoft® handle provides a soft feel• Blade fl exes just right for feathering but won’t take a set• Premium tempered blue steel blade with aluminum backing
plate
3506D Durosoft 6” taping knife , blue steel blade $9.253510D Durosoft 10” taping knife , blue steel blade $10.253512D Durosoft 12” taping knife , blue steel blade $11.25
NO Pinch points
NO Free fall
NO Spinning wheels
NO Exposed parts
0
0000000000000000p g
p
d ll l
nnnndddardardarddrdrdddddadadardarddadadarddarddadarddddarddddd ddddddarddddddd d
ted steel
pin will
l casters
ffffffffffffffffffffff
Stilts
e
Drywall Dolly
40 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
HS81T-24 24” Pro Series hedge trimmer, 22.7 cc $499.99FS130R Bike Handle Trimmer with straight shaft, 36.3 cc $399.99FS100RX 4-Mix trimmer with straight shaft, 31.4 cc $339.99FS38 Trimmer with curved shaft, 27.2 cc $129.99FS55R Trimmer with straight shaft, 27.2 cc $229.99
See Page 8 And 31 For More Stihl
11’ 5” Telescoping Pole Pruner
• 36.3 cc 2 cycle engine• 12” bar and chain• 17.2 lbs. with cutting attachment
$64999 HT131
• Rolled step prevents materials from accumulating under blade
• Wood/steel D grip fi ts gloved hand comfortable• 30” wood handle
$1875 BMTDS
D-Handle Square Point Shovel
13-093 D-handle square point shovel $20.7512-013 D-handle round point shovel $39.7512-019 Long handle round point shovel $36.50
RAKES
18-863 16 Tine bow rake with 60” handle $20.2519-237 24” Spring rake with wood handle $11.25
• 7’ x 1.5” polyester strap with hook• Zinc plated with yellow chromate for
extremely high weather protection• Fits Weatherguard® Racks
$9800 149RS1
149RS10 Complete barrel, hook, strap and knob replacement kit $33.90
Chrome Hitch Balls
• 10,000 lb. capacity• 2” x 27 ft. ratchet load binder• Flat zinc plated hooks
10R27FHY
Ratchet Load Binder
SPAN SET
• 2,500 lb. capacity• 1” x 15 ft. ratchet assembly• Includes J hook and keeper rings
$1950 40R15JK
• Fits 15 through 55 gallon drums with 2” opening• Dispences approximately a pint per stroke
$4130 381 (4-5485)
Drum Pumps
NATIONAL SPENCER
• Fits 15 through 55 gallon drums with 2” bung opening• Dispencing gasoline, diesel fuel and similar light petroleum
products• Dispences approximately 7-1/2 gallons per 100 revolutions
$7300 962 (4-4530)
Tie-Down Straps
60R20JK 2” Ratchet tie down, 6,000 lb. Capacity $26.50• Reduce the slams and bangs associated with
trailer towing during starting, stopping and towing over rough surfaces
$6795 149AMSSC4
CONVERT-A-BALL
• Exceeds the national standard SAE-J684 for ball hitches. V-5 rated SAFE!
• 10,000 lb. rating• Stainless steel
$6175 903SS
906SS 1” 2-Ball stainless steel 2” and 2-5/16” set $73.9580796 2-Way multi hitch with 2” and 2-5/16” ball $79.951496W Cushioned 6-way multi-hitch $117.00
4” Drop Cushioned Ball Mount
1” Reg. Shank With 1-7/8” And 2” Balls
• Fights all common fi res (Class ABC): wood, electrical, gas oil, fl ammable liquids, paper and cloth
• UL rated 1-A: 10-B:C• Easy to pull safety pin
$2925 466142
• Class 3A40BC: Fights oil, gas grease, fl ammable liquids, electrical, wood, paper and cloth fi res
• Meets and exceeds 2A:10B:C• Flexible hose for ease of use
$5995 466143
$14700 TS2802TX20 2 Ply 2” X 20’
$21500 TS2803TX20 2 Ply 3” X 20’
3 Lb. Fireway Fire Extinguisher
5 Lb. Fireway 340HD Fire Extinguisher
466204 10 LB. Proline type ABC fi re extinguisher $80.50
420118 Fire extinguisher bracket for fi reaway 5, 10 & 110 DOT approved $9.75
420119 Fire extinguisher bracket for 5 lb model 340 DOT approved $8.95
Weekender® Ladder Rack• Easy on- easy off for that occasional need to
carry a ladder or long material• Fits fullsize and mini pickups• 250 lb. capacity
$33750 1450B
#7631 Leg Adapters Needed For 2004 Ford F-150
Full Size Van Racks• 12 gauge steel mounting base spreads the load for
maximum carrying capacity• Cross members are 14 gauge steel wall tubing• Adjustable tie down loops
$28000 149205
149211 Aluminum van rack with 2 cross members $432.00149209 White aluminum van rack w/2 cross members $395.00149216 3 Cross member van rack $420.00149210 Safari ladder rack $1040.00
1491211 Accessory side rails for 6.5’ Bed $520.001491215 Aluminum cross member for 1210 and 12111 $115.00
Custom Installations AvailableCall For Details
• 800 lb. load capacity• Fits full size pickup• Side rails optional
$71500 1491200
$56000 1491210 FITS 8’ BED
Accessory
Side Rails
Nylon Lifting Slings
2” X 27’ Ratchet Load Binder With U Hook
Tow-All Vehicle Strap with Tuff-Edge Webbing
EE1802X14 1 Ply 2” x 14’ nylon lifting sling $27.65EE1802X22 1 Ply 2” x 22’ nylon lifting sling $37.75EE1803X12 1 Ply 3” x 12’ nylon lifting sling $40.85EE1803X16 1 Ply 3” x 16’ nylon lifting sling $49.00EE2802X14 2 Ply 2” x 14’ nylon lifting sling $45.90EE2802X20 2 Ply 2” x 20’ nylon lifting sling $62.00EE2803X16 2 Ply 3” x 16’ nylon lifting sling $81.95EE2803X25 2 Ply 3” x 25’ nylon lifting sling $121.50EE2804X20 2 Ply 4” x 20’ nylon lifting sling $130.75
Large Selection Of 1 Ply And 2 Ply Lifting Slings In Stock
Truck And Van Racks
1475B Black Weekender® ladder rack $340.00
Interior Sliding Ladder Rack• Fits most vehicles including enclosed trailers
and Sprinter vans• Works with most ladders up to 8 ft. including
multi-position ladders• Includes side mounting capabilities
As Low As
$1955Per Binder for 2 or more
Triangle Refl ector Flare Warning Kit
$3975 1508TF
• Meets or exceeds all DOT standards and requirements of FMVSS125
• Easy to erect• Exclusive wire bracing controls
degree of tilt
s and
with 2” openinger stroke
ngm
EE
all tubing
er Racacccccccckkkkkkkkkkkk
000000000000000000000000000000
$2175 26422
• 3,300 Working load limit• 10,000 lbs. Ultimate strength• Polyester
42 Visit Us At nuwayinc.com
Prices Good Through March 1, 2014 or While Supplies Last • Prices Subject To Change Without Notice
VEHICLE OUTFITTING & JOBSITE STORAGETOUGH AS EVER
Loaded with new tricks.Aluminum Saddle Box
• Extreme protection locks
• 90° Cover opening• 12V pass-through
• 15.3 cu.ft. storage capacity
$77000 117-0-02
117-5-01 Black aluminum saddle box $770.00123-0-01 Clear aluminum saddle box - deep $855.00127-0-02 Clear aluminum saddle box - shortbed f/s $705.00127-5-02 Black aluminum saddle box - shortbed f/s $695.00137-0-01 Clear aluminum saddle box - mini pickup $695.00149614 15.25” X 26” divider tray $67.00
184-0-01 Clear aluminum lo-side box for full or mini $480.00149911 19” X 11” tray $37.00
Aluminum Hi-Side Box• Rain gutter design is fully weather stripped and provides a positive seal
against the weather• Armor-tuf clear coat• 10.8 cu.ft. storage capacity
$81000149390
Transfer Tanks• Interior baffl es to prevent fuel sloshing and provide extra
reinforcing• For full size pickups• 90 gallon capacity
$76550 149354
149358 100 Gallon transfer tank for full size pu $695.00149350 50 Gallon transfer tank for mini pickup $605.00149352 75 Gallon transfer tank for f/s short bed $705.0030A1 Manual pump for transfer tank $139.00928 12 Volt pump for transfer tank $430.00
Aluminum Underbed Box
$62500 149636
• Armor-tuf clear coat• Fully arc welded seams• Aluminum door features a welded-on
reinforcing channel
Jobmaster® Cabinets
• 16 gauge steel construction• Double doors on front side• 47.5 cu.ft. storage capacity
$134000 149109
• 16 gauge steel construction• Double doors on front side• 54.9 cu.ft. storage capacity
$252000 149112
Hand Held Tool Boxes• 20” hand tool box• Tool tray included• Black powder coat fi nish for long life
$10500 149741
• 26” hand tool box• Tool tray included• Black powder coat fi nish for long life
$12000 149743
Storagemaster® Chests
• 48” Built-in ramp in front for loading large and bulky items
737CE-M Class 3 Safety Pants M-XXXL $19.0016-493 Kodiak Long Handle Scraper W/ Solid Shank 7” X 6” Blade $18.25
225PLUS Convection heater, up to 225,000 btu $119.55MH12TS 8-14,OOO btu/hr tank top heater - single burner $ 45.00MH30T 10-30,OOO btu/hr tank top heater - dual burners $ 79.55
K125 125,000 Btu kerosene heater with thermostat $295.55K170 170,000 Btu kerosene heater with thermostat $345.55K400 400,000 Btu kerosene heater with thermostat $1329.55K650 650,000 Btu kerosene heater with thermostat $1779.55400 400,000 Btu propane heater w/thermostat $470.55
Propane Heaters
Forced Air Heaters
Portable Heater - Indoor/ Outdoor Use
• 50 - 100,000 BTU• 350 cfm heated air output• Direct spark ignition
• 75,000 BTU• Heats approximately 1750 sq. ft.• Continuous ignition
• 4,000 - 18,000 BTU• Heats approximately 400 sq. ft.• Up to 220 hours on two 20 lb.
cylinders
$19955100
$20955HS75KT
$12955MH18B
Propane Forced Air Heater
170 125-170,000 Propane forced air heater $289.55
Jobsite Heaters
$600 6810• Half cap style• FR treated for safety (single wash)• 100% polyester knit
$2675 6802• 60 grams of Thinsulate™ Insulation from 3M• Durable, wind and water-resistant nylon shell to keep you
warm and dry• Trimmed with faux fur and a thick, quilted satin crown