Expandir disco en Windows 2003 –Diskpart Para expandir el disco duro utilizando espacio no particionado en Windows 2003 o XP, podemos utilizar la utilidad diskpart. Esto no sirve sobret odo para ampliar el espacio en disco de un equipo virtual. Importante: No funciona con discos primario o de sistema, solo para discos secundarios o de datos. Para ejecutarlo seguiremos los siguientes pasos: 1. Ejecutar Inicio-cmd 2. diskpart 3. list disk (muestra una lista de los discos) 4. select disk=0 (elegimos el disco a aexpand ir) 5. detail disk (para ver los diferentes volumenes) 6. select volume=1 (seleccionamos el volumen que queramos expandir) 7. extend (expandimos el disco) 8. detail disk (comprobamos si ha funcionado) 9. exit
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
1. In Windows Server 2008 you need to go to Server Manager, found in the Administrative
Tools folder or on the My Computer context menu.
2. Next, scroll down till you get to the Storage section, and in it go to the Disk Management
console.
3. Select the disk you want to extend, for example Drive C.
Note: Extending any volume is fine as long as you have additional unallocated free
space on that same physical hard disk . Note that you can also extend the partition
beyond the physical disk it is located on. This is useful when you run out of space
on that physical hard disk, and have brought in a new physical hard disk that youwish to use. However, unlike using that new disk as a totally new partition by itself,
this disk (or part of it) becomes a part of a partition located on the first disk. While
useful in some cases, this scenario might cause fault tolerance issues, because thisextended partition is NOT fault tolerant, and if something happens to one physical
disk, all the data on that extended partition becomes unavailable, and data loss can
occur. In any case, such an extended partition can contain an unlimited number of