www.xedgetools.com V2.0 Product Catalog
www.xedgetools.comV2.0
Product Catalog
www.xedgetools.com
RAZOR SERIES
Part Number Dia. Cut OAL Shank FlutesXR2060-CB 1/8” 1/2” 2.5” 1/4” 2XR2061-CB 3/16” 5/8” 2.5” 1/4” 3XR2062-CB 1/4” 3/4” 2.5” 1/4” 3XR2063-CB 3/8” 1” 2.5” 3/8” 3
The X-Edge Razor series line of bits are made for machining a wide range of materials including PVC, UHMW, HDPE, ACM and Solid Surface at ultra high rates of speed while maintaining superior edge quality regardless of what CNC router you own.
Page 1
VIPER SERIES
Part Number Dia. Cut OAL Shank FlutesXV2030 1/8” 3/8” 2” 1/4” 2XV2031 3/16” 5/8” 2” 1/4” 2XV2032 1/4” 1” 2.5” 1/4” 2XV2033 3/8” 1” 2.5” 3/8” 2XV2034 1/2” 1” 3” 1/2” 2
XV2034-EL 1/2” 1” 4” 1/2” 2
The X-Edge Viper series line is the result of years of try and fail testing. Coupled with our specially formulated misting fluid Liquid X ™ you can expect to achieve the greatest aluminum edge quality possible on a CNC router at unbelievable speeds.
eXcellent speed, eXcellent quality, eXcellent tools
ROUTER BITS
“O” SERIES
Part Number Dia. Cut OAL Shank FlutesXO2010 1/8” 1/2” 2.5” 1/4” 1XO2011 3/16” 5/8” 2.5” 1/4” 1
XO2012-S 1/4” 1/2” 2.5” 1/4” 1XO2012 1/4” 3/4” 2.5” 1/4” 1
XO2012-L 1/4” 1-1/8” 2.5” 1/4” 1
The “O” series is a highly polished single fluted tool with upcut geometry specifically designed for premium edge quality in acrylic but may be used to cut ACM, woods and other plastics. **For best results in acrylic utilize an edge finish pass of .03-.06**
COMPRESSION SERIES
Part Number Dia. Cut OAL Shank FlutesXC2022 1/4” 1” 2.5” 1/4” 2
*XC2022-M 1/4” 7/8” 3” 1/4” 2XC2023 3/8” 1” 3” 3/8” 2
XC2023-LL 3/8” 1-1/4” 3” 3/8” 2*XC2023-M 3/8” 7/8” 3” 3/8” 2*XC2026-M 3/8” 7/8” 3” 3/8” 3
Compression tool design with up and down cutting edges to prevent chipping on laminated materials while maintaining high cut rates. Use on MDF, Melamine board, and various woods. Consider mortising if better part hold down is desired. (dust pick up will be reduced using mortising type)
eXcellent speed, eXcellent quality, eXcellent tools
ROUTER BITS
* Indicates mortising
www.xedgetools.comPage 2
“V-GROOVE” SERIES
Part Number Angle Cut OAL Shank FlutesXV2005 90° 7/16” 1-3/4” 1/4” 2XV2006 60° 5/8” 1-3/4” 1/4” 2
These V-Groove tools are perfect for your signmaking and engraving needs. Pointed tip with no flat spot allows for sharp engraved letters and designs. Great for a wide variety of materials including woods and plastics.
eXcellent speed, eXcellent quality, eXcellent tools
ACM SERIES
Part Number Angle VDepth OAL Shank FlutesXACM90-V 90° 5/16” 2-3/8” 3/8” 2
XACM135-V 135° 5/16” 2-3/8” 3/8” 2
Our ACM Series tools make folding aluminum composite materials easy. Choose from 90 degree tools to create 90 degree folds or our 135 degree tools for 45 degree folds. ** For straight cutting of ACM see Razor or “O” series.**
ROUTER BITS
www.xedgetools.comPage 3
CHAMFER SERIES
Part Number Angle Cut OAL Shank FlutesXCH2042-S 90° .12” 2.36” 1/4” 3XCH2043-S 90° .157” 3” 3/8” 3XCH2044-S 90° .196” 3” 1/2” 3
Our Chamfer Series line of tooling offers a unique design of 3 upfluted spiral cut edges fit to an over all 90° to achieve phenomenal cut quality on aluminum, plastic, and wood materials.
BALL MILL SERIES
Part Number Dia. Cut OAL Shank FlutesXB2072 1/4” 3/4” 2-1/2” 1/4” 2XB2073 3/8” 1” 2-1/2” 3/8” 2
XB2073-M 8mm 16mm 60mm 8mm 2XB2074 1/2” 1” 3” 1/2” 2
The Ball Mill Series takes the standard ball nose platform to the next level with an extra finishing step and a spe-cial flute design optimized for aluminum machining. Also works well on plastics, and multiple wood materi-als.
eXcellent speed, eXcellent quality, eXcellent tools
ROUTER BITS
www.xedgetools.comPage 4
CARBIDE DRILL SERIES
Part Number Dia. Cut OALXCD2082-S 1/4” 1” 2.5”XCD2083-S 3/8” 1” 2.5”XCD2084-S 1/2” 1” 2.5”
Our carbide drill series was created for those that need perfect drill holes on a CNC router. End mills are not ideal for plunging straight down and standard drills do not last long. Solid carbide drill bits work great in alu-minum, wood, and plastics.
THREAD MILL SERIES
Part Number Dia. OAL Shank Thread CutXTM2052-M 5mm 50mm 6mm M8x1.25 14.4
XTMS2052-M 5.95 75mm 6mm M8x1.25 24XTMF2052-M 5.95 50mm 6mm M8x1.25 18
Thread mill tools are designed to create threads with a CNC machine that does not have a tapping function by using the appropriate toolpathing method in your CAM software and your desired thread mill size.
eXcellent speed, eXcellent quality, eXcellent tools
ROUTER BITS
“Other sizes including standard sizes available”
www.xedgetools.comPage 5
TABLE MILL SERIES
Part Number Dia. Cut OAL Shank FlutesXSC9001 2-1/2” N/A 2-3/4” 1/2” 2
Out table mill tool is designed to be used on MDF to provide a flat, smooth surface which will allow the greatest air flow from vacuum pump possible. Can also be used on any type of wood.
eXcellent speed, eXcellent quality, eXcellent tools
ROUTER BITS
www.xedgetools.comPage 6