Example of Sparse Index Filesmanegold/teaching/DBtech/... · 2004. 1. 28. · Chapter 12: Indexing and Hashing! Basic Concepts! Ordered Indices ! B+-Tree Index Files! B-Tree Index
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
! If deleted record was the only record in the file with its particular search-key value, the search-key is deleted from the index also.
! Single-level index deletion:
" Dense indices – deletion of search-key is similar to file record deletion.
" Sparse indices – if an entry for the search key exists in the index, it is deleted by replacing the entry in the index with the next search-key value in the file (in search-key order). If the next search-key value already has an index entry, the entry is deleted instead of being replaced.
" Perform a lookup using the search-key value appearing in the record to be inserted.
" Dense indices – if the search-key value does not appear in the index, insert it.
" Sparse indices – if index stores an entry for each block of the file, no change needs to be made to the index unless a new block is created. In this case, the first search-key value appearing in the new block is inserted into the index.
! Multilevel insertion (as well as deletion) algorithms are simpleextensions of the single-level algorithms
! Frequently, one wants to find all the records whose values in a certain field (which is not the search-key of the primary index satisfy some condition.
" Example 1: In the account database stored sequentially by account number, we may want to find all accounts in a particular branch
" Example 2: as above, but where we want to find all accounts with a specified balance or range of balances
! We can have a secondary index with an index record for each search-key value; index record points to a bucket that contains pointers to all the actual records with that particular search-key value.
! Disadvantage of indexed-sequential files: performance degrades as file grows, since many overflow blocks get created. Periodic reorganization of entire file is required.
! Advantage of B+-tree index files: automatically reorganizes itself with small, local, changes, in the face of insertions anddeletions. Reorganization of entire file is not required to maintain performance.
! Disadvantage of B+-trees: extra insertion and deletion overhead, space overhead.
! Advantages of B+-trees outweigh disadvantages, and they are used extensively.
B+-tree indices are an alternative to indexed-sequential files.
! For i = 1, 2, . . ., n–1, pointer Pi either points to a file record with search-key value Ki, or to a bucket of pointers to file records, each record having search-key value Ki. Only need bucket structure if search-key does not form a primary key.
! If Li, Lj are leaf nodes and i < j, Li’s search-key values are less than Lj’s search-key values
1. Examine the node for the smallest search-key value > k.
2. If such a value exists, assume it is Kj. Then follow Pi to the child node
3. Otherwise k ≥ Km–1, where there are m pointers in the node. Then follow Pm to the child node.
2. If the node reached by following the pointer above is not a leafnode, repeat the above procedure on the node, and follow the corresponding pointer.
3. Eventually reach a leaf node. If for some i, key Ki = k follow pointer Pi to the desired record or bucket. Else no record with search-key value k exists.
Updates on BUpdates on B++--Trees: Insertion (Cont.)Trees: Insertion (Cont.)
! Splitting a node:
" take the n(search-key value, pointer) pairs (including the one being inserted) in sorted order. Place the first ! n/2 " in the original node, and the rest in a new node.
" let the new node be p, and let k be the least key value in p. Insert (k,p) in the parent of the node being split. If the parent is full, split it and propagate the split further up.
! The splitting of nodes proceeds upwards till a node that is not full is found. In the worst case the root node may be split increasing the height of the tree by 1.
Result of splitting node containing Brighton and Downtown oninserting Clearview
Updates on BUpdates on B++--Trees: DeletionTrees: Deletion
! Otherwise, if the node has too few entries due to the removal, and the entries in the node and a sibling fit into a single node, then
" Redistribute the pointers between the node and a sibling such that both have more than the minimum number of entries.
" Update the corresponding search-key value in the parent of the node.
! The node deletions may cascade upwards till a node which has !n/2 " or more pointers is found. If the root node has only one pointer after deletion, it is deleted and the sole child becomes the root.
Examples of BExamples of B++--Tree DeletionTree Deletion
! The removal of the leaf node containing “Downtown” did not result in its parent having too little pointers. So the cascaded deletions stopped with the deleted leaf node’s parent.
! Index file degradation problem is solved by using B+-Tree indices. Data file degradation problem is solved by using B+-Tree File Organization.
! The leaf nodes in a B+-tree file organization store records, instead of pointers.
! Since records are larger than pointers, the maximum number of records that can be stored in a leaf node is less than the number of pointers in a nonleaf node.
! Leaf nodes are still required to be half full.
! Insertion and deletion are handled in the same way as insertion and deletion of entries in a B+-tree index.
! Good space utilization important since records use more space than pointers.
! To improve space utilization, involve more sibling nodes in redistribution during splits and merges" Involving 2 siblings in redistribution (to avoid split / merge where possible)
! Worst has function maps all search-key values to the same bucket; this makes access time proportional to the number of search-key values in the file.
! An ideal hash function is uniform, i.e., each bucket is assigned the same number of search-key values from the set of allpossible values.
! Ideal hash function is random, so each bucket will have the same number of records assigned to it irrespective of the actual distribution of search-key values in the file.
! Typical hash functions perform computation on the internal binary representation of the search-key.
" For example, for a string search-key, the binary representations of all the characters in the string could be added and the sum modulo the number of buckets could be returned. .
Deficiencies of Static HashingDeficiencies of Static Hashing
! In static hashing, function h maps search-key values to a fixed set of B of bucket addresses.
" Databases grow with time. If initial number of buckets is too small, performance will degrade due to too much overflows.
" If file size at some point in the future is anticipated and number of buckets allocated accordingly, significant amount of space will be wasted initially.
" If database shrinks, again space will be wasted.
" One option is periodic re-organization of the file with a new hash function, but it is very expensive.
! These problems can be avoided by using techniques that allow the number of buckets to be modified dynamically.
Updates in Extendable Hash Structure Updates in Extendable Hash Structure (Cont.)(Cont.)
! When inserting a value, if the bucket is full after several splits (that is, i reaches some limit b) create an overflow bucket instead of splitting bucket entry table further.
! To delete a key value, " locate it in its bucket and remove it.
" The bucket itself can be removed if it becomes empty (with appropriate updates to the bucket address table).
" Coalescing of buckets can be done (can coalesce only with a “buddy” bucket having same value of ij and same ij –1 prefix, if it is present)
" Decreasing bucket address table size is also possible
! Note: decreasing bucket address table size is an expensive operation and should be done only if number of buckets becomes much smaller than the size of the table
MultipleMultiple--Key AccessKey Access! Use multiple indices for certain types of queries.
! Example:
select account-number
from account
where branch-name = “Perryridge” and balance - 1000
! Possible strategies for processing query using indices on single attributes:
1. Use index on branch-name to find accounts with balances of $1000; test branch-name = “Perryridge”.
2. Use index on balance to find accounts with balances of $1000; test branch-name = “Perryridge”.
3. Use branch-name index to find pointers to all records pertaining to the Perryridge branch. Similarly use index on balance. Take intersection of both sets of pointers obtained.
Indices on Multiple AttributesIndices on Multiple Attributes
! With the where clausewhere branch-name = “Perryridge” and balance = 1000the index on the combined search-key will fetch only records that satisfy both conditions.Using separate indices in less efficient — we may fetch many records (or pointers) that satisfy only one of the conditions.
! Can also efficiently handle where branch-name - “Perryridge” and balance < 1000
! But cannot efficiently handlewhere branch-name < “Perryridge” and balance = 1000May fetch many records that satisfy the first but not the second condition.
Suppose we have an index on combined search-key(branch-name, balance).
! Structure used to speed the processing of general multiple search-key queries involving one or more comparison operators.
! The grid file has a single grid array and one linear scale for each search-key attribute. The grid array has number of dimensions equal to number of search-key attributes.
! Multiple cells of grid array can point to same bucket
! To find the bucket for a search-key value, locate the row and column of its cell using the linear scales and follow pointer
! A grid file on two attributes A and B can handle queries of all following forms with reasonable efficiency
" (a1 ≤ A ≤ a2)
" (b1 ≤ B ≤ b2)
" (a1 ≤ A ≤ a2 ∧ b1 ≤ B ≤ b2),.
! E.g., to answer (a1 ≤ A ≤ a2 ∧ b1 ≤ B ≤ b2), use linear scales to find corresponding candidate grid array cells, and look up all the buckets pointed to from those cells.
Efficient Implementation of Bitmap OperationsEfficient Implementation of Bitmap Operations
! Bitmaps are packed into words; a single word and (a basic CPU instruction) computes and of 32 or 64 bits at once" E.g. 1-million-bit maps can be anded with just 31,250 instruction
! Counting number of 1s can be done fast by a trick:" Use each byte to index into a precomputed array of 256 elements
each storing the count of 1s in the binary representation
! Can use pairs of bytes to speed up further at a higher memory cost
" Add up the retrieved counts
! Bitmaps can be used instead of Tuple-ID lists at leaf levels of B+-trees, for values that have a large number of matching records" Worthwhile if > 1/64 of the records have that value, assuming a
tuple-id is 64 bits
" Above technique merges benefits of bitmap and B+-tree indices