Features Benefits EX-100P/P2 - 1000P/P2 Inline Oil in Water Analyzer • Easy to use • Simultaneous measurement of two streams for one device (EX-100P2 and EX-1000P2) • Low Cost of Ownership (COO) with no routine maintenance • No degradation of signal or recalibration required • Inline probes allows for analyzer to be located up to 33m from probes location • Inline probes are installed directly into processes pipes • Remote control and monitoring (ideal for un-manned locations and remote process monitoring) The EX-100P and the EX-100P2 are respectively a single and dual inline probe Oil in Water analyzers that use fluorescence to provide continuous accurate measurements of oil concentration in water. The additional probe on the EX-100P2 allows monitoring of two process points simultaneously with dual readings displayed on the analyzer. Reliable real-time data enables operators to take accurate measurements and to improve efficiency enabling cost reductions. In addition to the standard probe features the 1000 models offer spectral analysis. • Patented ultrasonic cleaning • Laser Induced Fluorescence (LIF) • Inline probe format • Second probe for simultaneous dual measurement (EX- 100P2/1000P2) • Effective means of monitoring performance of separation equipment both inlet and outlet (EX-100P2/1000P2) • Both readings available on screen and via output signals (EX-100P2/1000P2) • Double block & bleed valve hot insertion/extraction device • Various measurement ranges configurable (0-10ppm [...] up to 0-20,000ppm) • Measurement repeatability ±1% of full scale range • Remote management and diagnostics • Easy to install (no sample conditioning required) • Multiple communications options – 4-20mA, HART, Modbus, Extended Ethernet or WiFi • Optional integrated spectrometer Fluorescence Ultrasonics Spectroscopy World’s Best Oil in Water Analyzers www.advancedsensors.co.uk