WE WROTE THE BOOK ON MUD PUMPS. AMC is a full service distributor of Weatherford Mud Pumps along with Weatherford’s new Ellis Williams mud pump line. We can offer either of these pumps under our distributorship agreement with Weatherford.
Jan 12, 2016
WE WROTE THE BOOK ON MUD PUMPS.AMC is a full service distributor of Weatherford Mud Pumps along with Weatherford’s
new Ellis Williams mud pump line. We can offer either of these pumps under our distributorship agreement with Weatherford.
Table of Contents
EWECO OVERVIEW 1-2
EWECO Story
EWECO Advantage
EWECO Mud Pumps
EWECO Pumps Offer
•
•
•
•
EWECO PUMP INDEX 3
EWECO Quick Reference Pump Index
•
EWECO E MODEL PUMPS 4-12
E-447
E-600
E-800
E-1100
E-1300
E-1600
E-1700-14
E-2200
•
•
•
•
•
•
•
•
EWECO EH MODEL PUMPS
EH-750
EH-1000
EH-2200-14
EH-2200-15
•
•
•
•
13-16
EWECO EQ MODEL PUMPS 17-22
EQ-750
EQ-1000
EQ-1300
EQ-1700
EQ-2200
EQ-3000
•
•
•
•
•
•
EWECO FORMS 23-24
ISO-9001 Certification
EWECO Order Form
•
•
EWECO TABLES & CHARTSBack
Cover
Conversion Table
Miscellaneous Equations
•
•
The EWECO Story. Ellis Williams began his life’s work with mud pumps in 1942. Researching, designing, testing—he was relentless in his efforts to build pumps with greater efficiency and durability for rugged oilfield operations.
Over the next 30 years, Ellis pioneered single-acting triplex pumps for oilfield drilling. He built many of these ground-breaking pumps for Brewster (the Skytop Brewster Triplex pumps). By the 1970s, most pumps in the industry were designed by Ellis Williams. Clearly, he was ready to design and build superior mud pumps under his own banner. And thus, in 1974, the Ellis Williams Company was born.
For the last 30-plus years, the name Ellis Williams has been synonymous with efficient, innovative and extreme-ly durable pumps. We originated the use of all-roller bearings, eccentric crankshaft and internal gears. Ellis Williams wrote the AGMA Standard (424.01) Practice for Helical and Herringbone Gearing for Oilfield Mud Pumps. And we have continued to design and build drilling pumps without comparison in the industry.
Today, Ellis Williams Engineering Company (EWECO) is a full-service engineering and consulting company. Specializing in pumps and pump packages, we bring to our customers over 130 years of experience. We also provide consultation on pump applications, field service analysis and pump maintenance.
At EWECO, we wrote the book on mud pumps. But our book is a work in progress. As dynamic and reward-ing as our history has been, our most exciting chapters lie ahead.
The EWECO Advantage.It’s all about performance. At EWECO, our pumps are designed to deliver maximum performance with minimum pump weight. For us, that means greater horsepower per pound. Higher horsepower pumps—with a smaller footprint and lighter weight—shorten completion time. And because of superior design, EWECO pumps have a longer life expectancy and work a lot harder. In fact, our pumps are rated for 24 hour-a-day true continuous duty.
All EWECO pumps are manufactured in the USA. We cut our own patented herringbone gears which contribute to the longer life span of EWECO pumps. Our crankshafts are also a cut above. Instead of the automotive style, we make all eccentric crankshafts with anti-friction bearings for 25 percent greater efficiency. And while others use cast iron, EWECO’s longer-lasting crankshafts are constructed with forged steel.
In addition to our renowned triplex pumps, EWECO is one of the few companies in the industry to offer quintuplex pumps. In drilling situations where size and weight are critical, these innovative pumps can be extremely cost efficient.
No matter which models are right for your projects, you can depend on EWECO for quality, efficiency and longevity. Indeed, EWECO pumps deliver 95-99 percent mechanical efficiency.
A big advantage for your company, and for the environment, too.
EWECO Mud PumpsFrom design to construction, EWECO pumps are intended to meet tough and exacting standards. Manufactured in our own machine shop, every EWECO pump is fabricated with a high-strength, heat-treated alloy steel power frame. This method allows for easy modification of pump designs to meet your custom applications.
1
With over 125 utilization methods, EWECO can provide complete pump packages, including prime movers, controls, manifolds, piping, accessories and so on. We can mount equipment on heavy-duty oilfield or industrial type skids. We can also supply portable-trailer mounted units, top drive electric motor-driven units, or whatever your particular requirements demand.
EWECO includes the suction stabilizer on all units. We can also provide each with suction equipment, including discharge dampeners, gauges, relief valves, charge pumps and the like.
Regardless of the size or scope of your project, EWECO has the experience and resources to handle the job. At the same time, you can count on us for fast, flexible and personal service.
Single-acting triplex piston and plunger pumps for true, continuous duty up to 3000 hp
Single-acting all roller-bearing quintuplex piston and plunger mud pumps up to 3000 hp with all fluid end interchangeability options
Up to 20,000 psi continuous-duty fluid ends
Interchangeable fluid-end styles with all other types, including linear bore
All EWECO pumps deliver maximum performance per pound.
All EWECO Pumps Offer:Anti-friction roller bearings throughout without compromise:
Pinions, gears, crankshafts and fluid end modules made from high-strength, heat-treated, forged- al-loy steel
Versatility of engineering and design to accommodate: Various internal gear ratios, all sizes, all AGMA 424.01
Balanced, forged-alloy steel eccentric crank-shafts, machined between centers on all axes
•
•
•
•
•
•
•
•
The “EH” series of lightweight and Light-Lift continuous duty triplex pumps, 800 hp-1600 hp are also available. These pumps are excellent choices for helicopter lift, trailer-mounted packages, offshore platforms and any application where weight and size must be kept to a minimum.
Worldwide Applications For EWECO Pumps:
Oil Well Drilling Mud Pumps
Well Servicing/Workover
Water Flood
Cutting Reinjection
Saltwater Disposal
Cementing
Crude Oil Transfer
Hydraulic Press Water Supply
Horizontal Directional Drilling (HDD)
Water Blast & Jetting Service
Pressure Maintenance
Metering Applications
Coil Tubing Drilling
•
•
•
•
•
•
•
•
•
•
•
•
•
2
Pump Type
Pump Model
Diameter& Stroke
Maximum Horse Power
Maximum PSI
Maximum Flow (gal/min)
MaximumRPM
SingleActingTriplexPiston
Most ModelsAre AvailableWith Plungers
Check with Factory Details
E-447 6” x 7” 440 5000 565 220
E-600 7” x 8 ½” 600 5000 574 135
E-800 7” x 8 ½” 800 5000 637 150
E-1100 7” x 10” 1100 5000 675 135
E-1300 7” x 12” 1300 5000 720 120
E-1600 7” x 12” 1600 5000 720 120
E-1700-14 8” x 14” 1700 7500 1097 120
E-2200 9” x 15” 2200 7500 1363 110
SingleActingTriplex
Light-lift/Lightweight
Piston
EH-750 7” x 8 ½” 750 5000 743 175
EH-1000 7” x 10” 1000 5000 800 160
EH-2200-14 8” x 14” 2200 7500 1142 125
EH-2200-15 8” x 15” 2200 7500 1175 120
Single Acting
QuintuplexPiston &Plunger
EQ-750 6” x 7 ½” 800 5000 1102 240
EQ-1000 6” x 8 ½” 1000 5000 1040 200
EQ-1300 7” x 10 ½” 1300 5000 1399 160
EQ-1700 7” x 11” 1700 7500 1283 140
EQ-2200 7 ½” x 12” 2200 7500 1492 130
EQ-3000 7 ½” x 12” 3000 7500 1607 140
Quick Reference Pump Index
3
E-447
E-447
High Performance7” Stroke Triplex
Strokes per min. 220 200 170 140 110 80
Input HP** Rating 440 400 340 280 220 160
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
6” 1267 2.570 565 514 437 360 283 206
5½” 1508 2.160 475 432 367 302 238 173
5” 1824 1.785 393 357 303 250 196 143
4½” 2252 1.446 318 289 260 202 145 101
4” 2851 1.142 251 228 194 160 126 91
3½” 3723 0.875 192 175 157 122 87 61
3” 5000* 0.643 141 129 109 90 71 51
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
Classification General Duty
Rated Input HP 440
Pump Speed 220
Stroke Length 7”
Maximum Piston Size 6”
Fluid End Working Pressure Rating
5000 PSI
Discharge Connection Size 4” Flange
Suction Connection Size 8” Flange
Piston Rod Size SA-2
Valve Size API 5
Crankcase Oil Capacity 40 gal.
Linerwash Capacity 40 gal.
Pump Weight Complete, Less Skid
13,080 lbs.
Gear Ratio 4.71 to 1
Drive Shaft Diameter 4¼”
4
E-600
E-600
High Performance8½” Stroke Triplex
Strokes per min. 135 125 115 105 95 80
Input HP** Rating 600 556 511 467 422 356
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
7” 1703 4.248 574 531 489 446 404 340
6” 2319 3.121 421 390 359 328 297 250
5” 3339 2.168 293 271 249 228 206 173
4½” 4122 1.756 237 219 202 184 167 140
4” 5000* 1.387 187 173 160 146 132 111
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
Classification General Duty
Rated Input HP 600
Pump Speed 135
Stroke Length 8½”
Maximum Piston Size 7”
Fluid End Working Pressure Rating
5000 PSI
Fluid End Type PZ9
Crankcase Oil Capacity 55 gal.
Linerwash Capacity 35 gal.
Pump Weight Complete, Less Skid
18,500 lbs.
Gear Ratio 4.04 to 1
Drive Shaft Diameter 6”
5
E-800 “PZ Style”
E-800 “PZ Style”
High Performance8½” Stroke Triplex
Strokes per min. 150 140 130 120 100 80
Input HP** Rating 800 747 693 640 533 427
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
7” 2044 4.248 637 595 552 510 425 340
6½” 2371 3.663 549 513 476 440 366 293
6” 2782 3.121 468 437 406 375 312 250
5½” 3311 2.623 393 367 341 315 262 210
5” 4007 2.168 325 303 282 260 217 173
4½” 4946 1.756 263 246 228 211 176 140
4” 5000* 1.387 208 194 180 166 139 111
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
Classification General Duty
Rated Input HP 800
Pump Speed 150
Stroke Length 8½”
Maximum Piston Size 7”
Fluid End Working Pressure Rating
5000 PSI
Crankcase Oil Capacity 55 gal.
Linerwash Capacity 35 gal.
Pump Weight Complete, Less Skid
19,500 lbs.
Gear Ratio 4.04 to 1
Drive Shaft Diameter 6”
6
m.
E-800
E-800
High Performance8½” Stroke Triplex
Strokes per min. 150 140 130 120 100 80
Input HP** Rating 800 747 693 640 533 427
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
6¼” 2564 3.387 508 474 440 406 339 271
6” 2782 3.121 468 437 406 375 312 250
5” 4007 2.168 325 303 282 260 217 173
4½” 4946 1.756 263 246 228 211 176 140
4” 5000* 1.387 208 194 180 166 139 111
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
Classification General Duty
Rated Input HP 800
Pump Speed 150
Stroke Length 8½”
Maximum Piston Size 6¼”
Fluid End Working Pressure Rating
5000 PSI
Crankcase Oil Capacity 55 gal.
Linerwash Capacity 35 gal.
Pump Weight Complete, Less Skid
19,500 lbs.
Gear Ratio 4.04 to 1
Drive Shaft Diameter 6”
7
E-1100
E-1100
High Performance10” Stroke Triplex
Strokes per min. 135 125 115 105 95 85
Input HP** Rating 1100 1019 937 856 774 693
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
7” 2655 4.998 675 625 575 525 475 425
6½” 3079 4.310 582 539 496 452 409 366
6” 3613 3.672 496 459 422 386 349 312
5½” 4300 3.086 417 386 355 324 293 262
5” 5000* 2.550 344 319 293 268 242 217
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
Classification General Duty
Rated Input HP 1100
Pump Speed 135
Stroke Length 10”
Maximum Piston Size 7”
Fluid End Working Pressure Rating
5000 PSI
Fluid End Style “PZ-11”
Discharge Connection Size 5” Flange
Suction Connection Size 10” Flange
Crankcase Oil Capacity 110 gal.
Linerwash Capacity 70 gal.
Pump Weight Complete, Less Skid
28,700 lbs.
Gear Ratio 4.21 to 1
Drive Shaft Diameter 7¾”
8
erm.
E-1300
E-1300
High Performance12” Stroke Triplex
Strokes per min. 120 110 100 90 70 50
Input HP** Rating 1300 1192 1083 975 758 542
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
7” 2941 5.998 720 660 600 540 420 300
6½” 3411 5.171 621 569 517 465 362 259
6” 4003 4.406 529 485 441 397 308 220
5½” 4764 3.703 444 407 370 333 259 185
5” 5000* 3.060 367 337 306 275 214 153
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
Classification General Duty
Rated Input HP 1300
Pump Speed 120
Stroke Length 12”
Maximum Piston Size 7”
Fluid End Working Pressure Rating
5000 PSI
Discharge Connection Size 5” Flange
Suction Connection Size 12” Flange
Valve Size FB-1300
Piston Rod End FB-1300
Crankcase Oil Capacity 185 gal.
Linerwash Capacity 65 gal.
Pump Weight Complete, Less Skid
58,500 lbs.
Gear Ratio 4.4688 to 1
Drive Shaft Diameter 8½”
9
er-em.
E-1600
E-1600
High Performance12” Stroke Triplex
Strokes per min. 120 110 100 90 70 50
Input HP** Rating 1600 1354 1231 1108 862 615
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
7” 3620 5.998 720 660 600 540 420 300
6½” 4198 5.171 621 569 517 465 362 259
6” 4927 4.406 529 485 441 397 308 220
5½” 5000* 3.703 444 407 370 333 259 185
5” 5000* 3.060 367 337 306 275 214 153
Classification General Duty
Rated Input HP 1600
Pump Speed 120
Stroke Length 12”
Maximum Piston Size 7”
Fluid End Working Pressure Rating
5000 PSI
Discharge Connection Size 5” Flange
Suction Connection Size 10” Flange
Valve Size FB-1600
Piston Rod End FB-1600
Crankcase Oil Capacity 185 gal.
Linerwash Capacity 65 gal.
Pump Weight Complete, Less Skid
58,500 lbs.
Gear Ratio 4.4688 to 1
Drive Shaft Diameter 8½”
10
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
er-m.
E-1700-14
E-1700-14
High Performance14” Stroke Triplex
Strokes per min. 120 110 100 90 80 60
Input HP** Rating 1700 1558 1417 1275 1133 850
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
8” 2524 9.139 1097 1005 914 823 731 548
7½” 2872 8.033 964 884 803 723 643 482
7” 3297 6.997 840 770 700 630 560 420
6” 4487 5.141 617 565 514 463 411 308
5” 6462 3.570 428 393 357 321 286 214
4½” 7500* 2.892 347 318 289 260 231 174
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
Classification General Duty
Rated Input HP 1700
Pump Speed 120
Stroke Length 14”
Maximum Piston Size 8”
Fluid End Working Pressure Rating
7500 PSI
Crankcase Oil Capacity 185 gal.
Linerwash Capacity 85 gal.
Pump Weight Complete, Less Skid
58,500 lbs.
Gear Ratio 4.7353 to 1
Drive Shaft Diameter 8½”
11
m.
E-2200-15
E-2200
High Performance15” Stroke Triplex
Strokes per min. 110 100 90 80 70 60
Input HP** Rating 2200 2000 1800 1600 1400 1200
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
9” 2628 12.393 1363 1239 1115 991 868 744
8½” 2946 11.054 1216 1105 995 884 774 663
8” 3326 9.792 1077 979 881 783 685 588
7½” 3784 8.606 947 861 775 689 602 516
7” 4344 7.497 825 750 675 600 525 450
6½” 5038 6.464 711 646 582 517 452 388
6” 5912 5.508 606 551 496 441 386 330
5½” 7036 4.628 509 463 417 370 324 278
5” 7500* 3.825 421 382 344 306 268 230
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Classification General Duty
Rated Input HP 2200
Pump Speed 110
Stroke Length 15”
Maximum Piston Size 9”
Fluid End Working Pressure Rating
7500 PSI
Discharge Connection Size 5” Flange
Suction Connection Size 12” Flange
Valve Size API 7
Liner Style EWECO
Crankcase Oil Capacity 210 gal.
Linerwash Capacity 260 gal.
Pump Weight Complete, Less Skid
82,490 lbs.
Gear Ratio 4.85 to 1
Drive Shaft Diameter 9¾”
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
12
EH-750
EH-750
High Performance8½” Stroke Triplex
Strokes per min. 175 155 135 115 95 75
Input HP** Rating 750 664 579 493 407 321
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
7” 1643 4.248 743 658 574 489 404 319
6” 2236 3.121 546 484 421 359 297 234
5” 3220 2.168 379 336 293 249 206 163
4½” 3975 1.756 307 272 237 202 167 132
5” 5000* 1.387 243 215 187 160 132 104
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
Classification General Duty
Rated Input HP 750
Pump Speed 175
Stroke Length 8½”
Maximum Piston Size 7”
Fluid End Working Pressure Rating
5000 PSI
Valve Size API 5
Piston Rod End SA-4
Discharge Connection Size 4” Flange
Suction Connection Size 8” Flange
Crankcase Oil Capacity 55 gal.
Linerwash Capacity 35 gal.
Pump Weight Complete, Less Skid
12,800 lbs.
Gear Ratio 5.05 to 1
13
m.
EH-1000
EH-1000
High Performance10” Stroke Triplex
Strokes per min. 160 150 130 90 70 50
Input HP** Rating 1000 938 813 563 438 313
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
7” 2036 4.998 800 750 650 450 350 250
6” 2771 3.672 588 551 477 330 257 184
5½" 3298 3.086 494 463 401 278 216 154
5” 3991 2.550 408 383 332 230 179 128
4½” 4927 2.066 330 310 269 186 145 103
4” 5000* 1.632 261 245 212 147 114 82
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Classification General Duty
Rated Input HP 1000
Pump Speed 160
Stroke Length 10”
Maximum Piston Size 7”
Fluid End Working Pressure Rating
5000 PSI
Discharge Connection Size 4” Union
Suction Connection Size 8” Flange
Accessory Connection Size 2” or 3”
Valve Size API 6
Piston Rod End API SA-4
Crankcase Oil Capacity 55 gal.
Linerwash Capacity 36 gal.
Pump Weight Complete, Less Skid
17,500 lbs.
Gear Ratio 5.18 to 1
Drive Shaft Diameter 6”
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
14
-.
EH-2200-14
EH-2200-14
High Performance14” Stroke Triplex
Strokes per min. 125 115 105 90 80 70
Input HP** Rating 2200 2024 1848 1584 1408 1232
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
8” 3136 9.139 1142 1051 960 823 731 640
7½” 3568 8.033 1004 924 843 723 643 562
7” 4096 6.997 875 805 735 630 560 490
6½” 4750 6.033 754 694 633 543 483 422
6” 5575 5.141 643 591 540 463 411 360
5½” 6634 4.320 540 497 454 389 346 302
5” 7500 3.570 446 411 375 321 286 250
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel herringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
Classification General Duty
Rated Input HP 2200
Pump Speed 125
Stroke Length 14”
Maximum Piston Size 8”
Fluid End Working Pressure Rating
7500 PSI
Piston Rod End SA-4
Discharge Connection Size 5” Flange
Suction Connection Size 12” Flange
Crankcase Oil Capacity 185 gal.
Linerwash Capacity 85 gal.
Pump Weight Complete, Less Skid
51,500 lbs.
Gear Ratio 4.7353 to 1
Drive Shaft Diameter 8½”
15
EH-2200-15
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel herringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
EH-2200-15
High Performance15” Stroke Triplex
Strokes per min. 120 110 100 90 80 70
Input HP** Rating 2200 2017 1833 1650 1467 1283
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
8” 3049 9.792 1175 1077 979 881 783 685
7½” 3469 8.606 1033 947 861 775 689 602
7” 3982 7.497 900 825 750 675 600 525
6½” 4618 6.464 776 711 646 582 517 452
6” 5420 5.508 661 606 551 496 441 486
5½” 6450 4.628 555 509 463 417 370 324
5” 7500 3.825 459 421 383 344 306 268
Classification General Duty
Rated Input HP 2200
Pump Speed 120
Stroke Length 15”
Maximum Piston Size 8”
Fluid End Working Pressure Rating
7500 PSI
Piston Rod End SA-4
Discharge Connection 5” Flange
Suction Connection Size 12” Flange
Crankcase Oil Capacity 185 gal.
Linerwash Capacity 85 gal.
Pump Weight Complete, Less Skid
51,500 lbs.
Gear Ratio 4.7353 to 1
Drive Shaft Diameter 8½”
16
EQ-750
EQ-750
High Performance
7½” Stroke Quintuplex
Strokes per min. 240 210 180 150 120 100
Input HP** Rating 800 700 600 500 400 333
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
6” 1182 4.590 1102 964 826 689 551 459
5½” 1407 3.857 926 810 694 579 463 386
5” 1703 3.188 765 669 574 478 383 319
4” 2661 2.040 490 428 367 306 245 204
3” 4730 1.148 275 241 207 172 138 115
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel herringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
Classification General Duty
Rated Input HP 800
Pump Speed 240
Stroke Length 7½”
Maximum Piston Size 6”
Suction Size 8”
Discharge Size 4”
Fluid End Working Pressure Rating
5000 PSI
Crankcase Oil Capacity 42 gal.
Pump Weight Complete, Less Skid
14,000 lbs.
17
EQ-1000
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
EQ-1000
High Performance
8½” Stroke Quintuplex
Strokes per min. 200 170 140 110 80 50
Input HP** Rating 1000 850 700 550 400 250
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
6” 1565 5.202 1040 884 728 572 416 260
5” 2254 3.613 723 614 506 397 289 181
4½” 2782 2.926 585 497 410 322 234 146
4” 3521 2.312 462 393 324 254 185 116
3” 5000* 1.301 260 221 182 143 104 65
Classification General Duty
Rated Input HP 1000
Pump Speed 200
Stroke Length 8½”
Maximum Piston Size 6”
Discharge Connection Size 4”
Suction Connection Size 8”
Fluid End Working Pressure Rating
5000 PSI
Crankcase Oil Capacity 75 gal.
Linerwash Capacity 85 gal.
Pump Weight Complete, Less Skid
25,500 lbs.
18
EQ-1300
EQ-1300
High Performance
10½” Stroke Quintuplex
Strokes per min. 160 150 140 120 100 80
Input HP** Rat- 1300 1219 1138 975 813 650
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
7” 1513 8.747 1399 1312 1225 1050 875 700
6” 2059 6.426 1028 964 900 771 643 514
5” 2965 4.463 714 669 625 536 446 357
4” 4632 2.856 457 428 400 343 286 228
3½” 5,000* 2.187 350 328 306 262 219 175
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
Classification General Duty
Rated Input HP 1300
Pump Speed 160
Stroke Length 10½”
Maximum Piston Size 7”
Fluid End Working Pressure Rating
5000 PSI
Discharge Connection Size 4”
Suction Connection Size 10”
Crankcase Oil Capacity 80 gal.
Linerwash Capacity 85 gal.
Pump Weight Complete, Less Skid
29,940 lbs.
19
EQ-1700
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
EQ-1700
High Performance
11” Stroke Quintuplex
Strokes per min. 140 120 100 90 80 60
Input HP** Rating 1700 1457 1214 1093 971 729
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
7” 2158 9.163 1283 1008 916 825 733 550
6” 2937 6.732 942 808 673 606 539 404
5½” 3495 5.657 792 679 566 509 453 339
5” 4229 4.675 655 561 468 421 374 281
4½” 5221 3.787 530 454 379 341 303 227
4” 6608 2.992 419 359 299 269 239 180
3¾” 7500* 2.630 368 275 263 237 210 158
Classification General Duty
Rated Input HP 1700
Pump Speed 140
Stroke Length 11”
Maximum Piston Size 7”
Fluid End Working Pressure Rating
7500 PSI
Piston Rod End SA-4
Discharge Connection Size 5”
Suction Connection Size 12”
Crankcase Oil Capacity 110 gal.
Linerwash Capacity 85 gal.
20
em.
EQ-2200
EQ-2200
High Performance
12” Stroke Quintuplex
Strokes per min. 130 120 110 100 80 60
Input HP** Rat- 2200 2031 1862 1692 1354 1015
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
7½” 2401 11.475 1492 1377 1262 1148 918 689
7” 2757 9.996 1299 1200 1100 1000 800 600
6½” 3197 8.619 1120 1034 948 862 690 517
6” 3752 7.344 955 881 808 734 588 441
5½” 4465 6.171 802 741 679 617 494 370
5” 5403 5.100 663 612 561 510 408 306
4½” 6671 4.131 537 496 454 413 330 248
4” 7500* 3.264 424 392 359 326 261 196
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
Classification General Duty
Rated Input HP 2200
Pump Speed 130
Stroke Length 12”
Maximum Piston Size 7½”
Fluid End Working Pressure Rating
7500 PSI
Discharge Connection Size 5”
Suction Connection Size 12”
Gear Ratio 4.73 to 1
21
em.
EQ-3000
* BASED ON 100% VOLUMETRIC EFFICIENCY; **BASED ON 95% MECHANICAL EFFICIENCY
Minimum weight/maximum performance with continuous duty life expectancy. High performance steel fabricated power end with steel her-ringbone gears. Anti-friction roller bearings throughout. Forged steel eccentric crankshaft. Double (redundant) failsafe internal lube system. Metal to metal liner lock. High capacity liner wash system.
EQ-3000
High Performance
12” Stroke Quintuplex
Strokes per min. 140 130 110 100 80 60
Input HP** Rating 3000 2786 2357 2143 1714 1286
Piston Size
Discharge Pressure Rating
Output Gal/Rev Output – Gallons Per Minute*
7½” 3041 11.475 1607 1492 1262 1148 918 689
7” 3491 9.996 1399 1299 1100 1000 800 600
6½” 4048 8.619 1207 1120 948 862 690 517
6” 4751 7.344 1028 955 808 734 588 441
5½” 5654 6.171 864 802 679 617 494 370
5” 6842 5.100 714 663 561 510 408 306
4½” 7500* 4.131 578 537 454 413 330 248
Classification General Duty
Rated Input HP 3000
Pump Speed 140
Stroke Length 12”
Maximum Piston Size 7½”
Fluid End Working Pressure Rating
7500 PSI
Discharge Connection Size 5”
Suction Connection Size 12”
Gear Ratio 4.73 to 1
22
23
EWECO Certification
Application RequirementsPlease complete this form and submit to EWECO
Company Name: Address:
Contact: Phone/Fax: E-mail:
No. Req’d: Type of Pump: Piston Plunger Triplex Quintuplex
Service:
Type of Fluid: Solids in Fluid:
Continuous: Intermittent: Stand by/Emergency:
Fluid Properties @ Operating Temp: Specific Gravity ____________ ____________ ____________ Viscosity CP ____________ ____________ ____________ Vapor Pressure ____________ ____________ ____________ Corrosive Agents ____________ ____________ ____________Performance @ Operating Temp: Suction Pressure ____________ ____________ ____________ NPSHA (Net Positive Suction Head Available) ____________ ____________ ____________ Discharge Pressure (PSIG) ____________ ____________ ____________ Flow Rate (US GPM) ____________ ____________ ____________ Ambient Temperature (°F) ____________ ____________ ____________
Minimum Normal Maximum
Driver Required: Engine: Diesel:_______ Natural Gas:_______ Acceptable Mftr(s):_____________ Electrical Motor:HP______ Enclosure_______ Volts_______ Hertz_______ Phase_______ Service Factor________ Other________ Acceptable Mftr(s)________ Drive Type: V-Belt______ Gear Reducer______ Direct Connected_____ Transmission_____ Other:________________________________________________________________________
Requested paint/color scheme/spec.____________________________________________________Fluid End Preference: FB Style PZ Style NOI Style SW Style
Other Pertinent Information/Comments:
339 Magnolia Business Park Dr. • Magnolia, TX 77354281.252.PUMP (7867) • TOLL FREE: 866.94EWECO (39326) • Fax: 281.766.1982 • www.eweco.com
24
CONVERSION TABLE(INCHES DIAMETER TO FACE AREA)
PLUNGER OR PISTON SIZE (INCHES DIAMETER)
PLUNGER OR PISTON FACE AREA (SQUARE INCHES)
PLUNGER OR PISTON SIZE (INCHES DIAMETER)
PLUNGER OR PISTON FACE AREA (SQUARE INCHES)
1/2 .20 3-1/4 8.30
5/8 .31 3-3/8 8.95
3/4 .44 3-1/2 9.62
7/8 .60 3-5/8 10.32
1 .79 3-3/4 11.05
1-1/8 .99 3-7/8 11.79
1-1/4 1.23 4 12.57
1-3/8 1.48 4-1/4 14.19
1-1/2 1.77 4-1/2 15.90
1-5/8 2.07 4-3/4 17.72
1-3/4 2.41 5 19.64
1-7/8 2.76 5-1/4 21.65
2 3.14 5-1/2 23.76
2-1/8 3.55 5-3/4 25.97
2-1/4 3.98 6 28.27
2-3/8 4.43 6-1/4 30.68
2-1/2 4.91 6-1/2 33.18
2-5/8 5.41 6-3/4 35.78
2-3/4 5.94 7 38.48
2-7/8 6.49 7-1/4 41.28
3 7.07 7-1/2 44.18
3-1/8 7.67 7-3/4 47.17
Calculate Rod Load
Plunger Load or Piston Load = Pd x Face Area or Piston or Plunger
Calculate Horsepower (input HP required at pump pinion shaft or crankshaft)
Horsepower for Single Acting Pump=(GPM)(PD)(100) - (GPM)(Ps)(Em-5%) (1714)(Em) (1714)(100)
Horsepower for Double Acting Pump= (GPM)(Pd-Ps)(100) (1714)(Em)
Nomenclature:
Pd = Pump Discharge Pressure (PSI)Ps = Pump Suction Pressure (PSI)Em = Pump Mechanical Efficiency (in decimal form: i.e. (0.9), (0.85))GPM = U.S. Gallons Per MinuteRPM = Revolutions Per Minute Of Pump Crankshaft
1.
2.
TO CONVERT TO
UNITS OF LENGTH
InchesFeetMilesKilometers
UNITS OF AREA
Square Inches (in2)Square Centimeters (cm2)Square Feet (ft2)Square Meters (m2)Square MilesAcresAcres
UNITS OF VOLUME
Gallons (U.S.)Gallons (U.S.)Gallons (U.S.)Cubic Meters (m3)Cubic Feet (ft3)Cubic Feet (ft3)Cubic Feet (ft3)Hogsheads (U.S.)
UNITS OF WEIGHT
OuncesPoundsPoundsKilogramsU.S. Tons (Short)U.S. Tons (Short)
UNITS OF FLOW
GPM (U.S. Gal/Min)GPM (U.S. Gal/Min)GPM (U.S. Gal/Min)BPD (BBL (42 Gal.)/Day))BPD (BBL (42 Gal.)/Day))BPD (BBL (42 Gal.)/Day))
UNITS OF PRES-
SURE
PSI (lb/in2)PSI (lb/in2)KG/CM2
AtmospheresAtmospheresFeet of Water (20°C)Feet of Water (20°C)BarBar
UNITS OF POWER
Horsepower (HP)Horsepower (HP)Kilowatts (KW)
MULTIPLE BY
2.54000.30481.60900.6214
6.45160.15500.092910.7642.59004047.00.4047
3.785330.003785
0.13370264.20028.31700.028327.480528.42184
28.349453.590.45362.2046
907.22000
0.22710.063134.280
0.006620.001840.02917
6.8950.070307
14.22331.46961.0332
0.030480.43353
1.019714.504
1.0140.7457
1.341
TO OBTAIN
CentimetersMetersKilometersMiles
Square Centimeters (cm2)Square Inches (in2)Square Meters (m2)Square Feet (ft2)Square KilometersSquare Meters (m2)Hectares
LitersCubic Meters (m3)Cubic Feet (ft3)Gallons (U.S.)LitersCubic Meters (m3)Gallons (U.S.)Cubic Feet (ft3)
GramsGramsKilogramsPoundsKilogramsPounds
Cubic Meters/Hours (m3/hr)Liters/SecBPD (BBL (42 Gal.)/Day))Cubic Meters/Hours(m3/hr)Liters/Second
GPM (U.S. Gal/Min)
KPA (Kilo-Pascals)KG/CM2
PSI (lb/in2)PSI (lb/in2)KG/CM2
KG/CM2
PSI (lb/in2)KG/CM2
PSI (lb/in2)
Metric HorsepowerKilowatts (KW)Horsepower (HP)
MISCELLANEOUS
Torque = (HP)(5252) RPMDegrees Celsius (°C) = (F-32°)(5/9)°Degrees Farenheit (°F) = (9/5)°C + 32°Belt Length (Pitch Diameter Pump Sheave + Pitch Diameter Driver)
CONVERSION TABLE
Ellis Williams Engineering Company • 339 Magnolia Business Park Drive • Magnolia, Texas 77354
281-252-PUMP (7867) • Toll FREE: 866-94EWECO (39326) • Fax: 281-766-1982 • www.eweco.com
FOR MORE INFORMATION:
If you’d like to know more about EWECO’s superior, “Made-In-The USA” pumps and
pump packages, give us a call, or visit our web site. You’ll not only be impressed with our
great mud pumps; you’ll also appreciate the way we do business.
© 2008 Weatherford. All rights reserved. 5992.00
AMC is a full service distributor of Weatherford Mud Pumps along with Weatherford’s new Ellis Williams mud pump line. We can offer either of these pumps under our distributorship agreement with Weatherford.
AMC EQUIPMENT LOCATION * 11951-C FM 529 *Houston, TX 77041 PH: 281-598-9980 * FX: 281-598-9985 * www.appmach.com